Amphiphilic copolymers with pendant ­carbazolylalkyl groups. ­Effect of polymer structure on ­retardation of self‐quenching

A series of amphiphilic polyanions containing (9‐carbazolyl)alkyl methacrylamide or acrylamide were prepared and their fluorescence properties were compared in organic and aqueous solution. In organic solution, all copolymers exhibited a monomer emission which decayed exponentially, indicating no self‐quenching. Decreasing the length of the methylene spacer in the side chain induced the spectral broadening and sharpening, depending on the carbazolyl content in the copolymer. This may be related to the interchromophore interactions and the mobility of chromophores. In H ₂O, by contrast, quenched fluorescence was observed for the copolymers. It should be however noted that acrylamide‐type of amphiphilic copolymers, poly(9‐carbazolylmethyl‐acrylamide‐co‐sodium 2‐acrylamido‐2‐methylpropanesulfonate), are the least quenched polymers among those reported so far. Copyright © 2001 John Wiley & Sons, Ltd.     

Correcting for Spectral Cross‐Talk in Dual‐Color Fluorescence Cross‐Correlation Spectroscopy

Dual‐color fluorescence cross‐correlation spectroscopy (dcFCCS) allows one to quantitatively assess the interactions of mobile molecules labeled with distinct fluorophores. The technique is widely applied to both reconstituted and live‐cell biological systems. A major drawback of dcFCCS is the risk of an artifactual false‐positive or overestimated cross‐correlation amplitude arising from spectral cross‐talk. Cross‐talk can be reduced or prevented by fast alternating excitation, but the technology is not easily implemented in standard commercial setups. An experimental strategy is devised that does not require specialized hardware and software for recognizing and correcting for cross‐talk in standard dcFCCS. The dependence of the cross‐talk on particle concentrations and brightnesses is quantitatively confirmed. Moreover, it is straightforward to quantitatively correct for cross‐talk using quickly accessible parameters, that is, the measured (apparent) fluorescence count rates and correlation amplitudes. Only the bleed‐through ratio needs to be determined in a calibration measurement. Finally, the limitations of cross‐talk correction and its influence on experimental error are explored.     

Polymorph‐Dependent Solid‐State Fluorescence and Selective Metal‐Ion‐Sensor Properties of 2‐(2‐Hydroxyphenyl)‐4(3H)‐quinazolinone

2‐(2‐Hydroxy‐phenyl)‐4(3H)‐quinazolinone (HPQ), an organic fluorescent material that exhibits fluorescence by the excited‐state intramolecular proton‐transfer (ESIPT) mechanism, forms two different polymorphs in tetrahydrofuran. The conformational twist between the phenyl and quinazolinone rings of HPQ leads to different molecular packing in the solid state, giving structures that show solid‐state fluorescence at 497 and 511 nm. HPQ also shows intense fluorescence in dimethyl formamide (DMF) solution and selectively detects Zn²⁺ and Cd²⁺ ions at micromolar concentrations in DMF. Importantly, HPQ not only detects Zn²⁺ and Cd²⁺ ions selectively, but it also distinguishes between the metal ions with a fluorescence λ_max that is blue‐shifted from 497 to 420 and 426 nm for Zn²⁺ and Cd²⁺ ions, respectively. Hence, tunable solid‐state fluorescence and selective metal‐ion‐sensor properties were demonstrated in a single organic material.     

Monofluorination and Trifluoromethylation of BODIPY Dyes for Prolonged Single‐Molecule Detection

Electrophilic monofluorination with Selectfluor and nucleophilic trifluoromethylation with the Ruppert–Prakesh reagent of dimethyl‐, tetramethyl‐ and pentamethyl‐substituted boron dipyrromethenes (BODIPY) are investigated. Monofluorinated dyes are synthesized with low yields (<30 %), however trifluoromethyl derivatives are obtained in moderate to high yields (≈40–90 %). All compounds are characterized by steady‐state and time‐resolved fluorescence spectroscopy, the photostability is investigated with fluorescence correlation spectroscopy (FCS) and total internal reflection fluorescence microscopy (TIRF). Monofluorination hardly affects the spectroscopic parameters of the unsubstituted parent compounds, but distinctly enhances the photostability, whereas trifluoromethylation leads to a hypsochromic shift by up to 17 nm in both absorption and emission, slightly enhanced intersystem crossing, and higher photostability. Further development of soft fluorination and trifluoromethylation methods is therefore highly desired.     

Synthesis of diketopyrrolopyrrole‐containing conjugated polyelectrolytes for naked‐eye detection of DNA

Two water‐soluble cationic conjugated polyelectrolytes ( P1 and P2 ) containing diacetylene, diketopyrrolopyrrole (DPP), and fluorene units were synthesized with Glaser‐Hay coupling reaction as the key step. The narrow bandgap DPP units and the wide bandgap fluorene units in the cationic polyelectrolytes might form an energy donor‐acceptor molecule architectures, in which DPP units serve as an acceptor of the fluorescent resonance energy transfer. The addition of calf thymus DNA enhances the fluorescent resonance energy transfer from fluoreneethynylene segments to DPP units, which results in a sensitive color change from blue to red in the PL spectra and allows naked‐eye detection of DNA with low concentration. In addition, the detection of DNA with P1 and P2 is high selective because it is not interfered by common ions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Real‐Time Nanomicroscopy via Three‐Dimensional Single‐Particle Tracking

We developed a new method for real‐time, three‐dimensional tracking of fluorescent particles. The instrument is based on a laser‐scanning confocal microscope where the focus of the laser beam is scanned or orbited around the particle. Two confocal pinholes are used to simultaneously monitor regions immediately above and below the particle and a feedback loop is used to keep the orbit centered on the particle. For moderate count rates, this system can track particles with 15 nm spatial resolution in the lateral dimensions and 50 nm in the axial dimension at a temporal resolution of 32 ms. To investigate the interaction of the tracked particles with cellular components, we have combined our orbital tracking microscope with a dual‐color, wide‐field setup. Dual‐color fluorescence wide‐field images are recorded simultaneously in the same image plane as the particle being tracked. The functionality of the system was demonstrated by tracking fluorescent‐labeled artificial viruses in tubulin‐eGFP expressing HUH7 cells. The resulting trajectories can be used to investigate the microtubule network with super resolution.     

Fluorescence studies of the self‐organization of a cholesterol‐bearing polymethacrylate in n‐hexane solution

A copolymer of cholesteryl 6‐(methacryloyloxy)hexanoate and a small amount of (1‐pyrenylmethyl) 6‐(methacryloyloxy)hexanoate (Py‐C₅‐MA) was prepared by free radical copolymerization. A copolymer of 1‐eicosanylmethacrylate and a small amount of Py‐C₅‐MA was also prepared as a reference copolymer. A wide‐angle X‐ray diffraction pattern for an n‐hexane solution of the cholesterol(Chol)‐containing copolymer showed a peak corresponding to a spacing of 5.3 Å. In n‐hexane, the hydrodynamic radius (R_h) for the Chol‐containing copolymer (M_w = 7.8 × 10⁴) was 8.1 nm, while that of the eicosanyl‐containing copolymer (M_w = 4.9 × 10⁴) was 9.6 nm, R_h for the former being smaller than that for the latter, although M_w for the former was higher than that of the latter. ¹H‐NMR spectra of the Chol‐containing polymer in n‐hexane‐d₁₄ indicated a strong restriction of local motions of pendant Chol groups. Fluorescence spectra of the Chol‐containing copolymer in n‐hexane indicated that each pyrene group was isolated from others. In n‐hexane/benzene mixed solutions of the Chol‐containing polymer, the ratio of the intensity of the excimer relative to the monomer emission decreased with increasing the ratio of n‐hexane in the mixed solvent. Electron transfer from N,N‐dimethylaniline to singlet‐excited pyrene chromophores was suppressed in the Chol‐containing copolymer in n‐hexane. The pyrene chromophores exhibited a long triplet lifetime in n‐hexane. These observations led us to conclude that Chol groups formed stacks in n‐hexane, and that the pyrene chromophores were trapped in the Chol stacks, leading to the “protection” of pyrene from the bulk phase. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 47–58, 1999     

Polysaccharide‐templated twisted assemble of 2‐anilinonaphthalene‐6‐sulfonic acid

Schizophyllan (SPG) is a natural β‐1,3‐glucan that forms a triple helix (t‐SPG) in neutral aqueous solutions and t‐SPG can be denatured to single chains (s‐SPGs) in DMSO or alkaline solutions. Exchanging the denatured solutions for neutral water leads the renaturation of the triple helix. We have reported that hydrophobic molecules can form a complex with s‐SPG when they are present in the renaturation process. Some of these, for example poly(dA) and polyaniline, were found to have aromatic amino moieties. This report demonstrates whether s‐SPG can interact with other aromatic amino compounds such as anilinonaphthalene sulfonic acid (ANS) derivatives. Enhanced fluorescence intensity and red‐shifted UV absorption spectra were observed in the mixture of s‐SPG and 2,6‐ANS or 2,6‐TNS. In the circular dichroism measurement, the positive Cotton effects appeared after mixing 2, 6‐ANS with s‐SPG. When the amino proton was replaced by the methyl group or used in intramolecular hydrogen bonds, any spectral changes were not observed. These results indicate that amino proton in the ANS derivatives plays a key role in the complexation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1440–1448, 2008     

Fluorescent Detection of 2,4‐DNT and 2,4,6‐TNT in Aqueous Media by Using Simple Water‐Soluble Pyrene Derivatives

Pyrene‐containing water‐soluble probes for the fluorescent detection of nitroaromatic compounds (NACs), such as explosive components (2,4‐DNT and 2,4,6‐TNT) and herbicides (2,4‐dinitrocresol, 2,4‐DNOC), in aqueous media are reported. In the probes, the introduction of surface‐active hydrophilic “heads” at the periphery of lipophilic (i.e., hydrophobic) pyrene “tails” resulted in the formation of highly fluorescent micelle‐like aggregates/pre‐associates in aqueous solutions at concentrations of ≤10^?5 m . The enhanced fluorescence quenching of the herein reported architectures is achieved in the presence of ultra‐trace amounts of TNT or 2,4‐DNT with values of Stern–Volmer quenching constant close to 1×10⁵ m ^?1 and a detection limit as low as 182 ppb. The most hydrophilic probes demonstrated higher response to 2,4‐DNT over TNT. Filter paper test strips impregnated with 1×10^?5 m solutions of the probes were able to detect TNT, 2,4‐DNT, and other NACs at levels as low as 50 ppb in water.     

Synthesis and Transformations of 5‐Chloro‐2,2′‐Dipyrrins and Their Boron Complexes, 8‐Chloro‐BODIPYs

Symmetric dipyrrylketones 1 a , b were synthesized in two steps from the corresponding α‐free pyrroles, by reaction with thiophosgene followed by oxidative hydrolysis under basic conditions. The dipyrrylketones produced the corresponding 5‐chloro‐dipyrrinium salts or 5‐ethoxy‐dipyrrins on reaction with phosgene or Meerwein’s salt, respectively. Boron complexation of the dipyrrins afforded the corresponding 8‐functionalized BODIPYs (borondipyrromethenes) in high yields. The 5‐chloro‐dipyrrinium salts reacted with methoxide or ethoxide ions to produce monopyrrole esters, presumably via a 5,5‐dialkoxy‐dipyrromethane intermediate. In contrast, 8‐chloro‐BODIPYs underwent a variety of nucleophilic substitutions of the chloro group in the presence of alkoxide ions, Grignard reagents, and thiols. In the presence of excess alkoxide or Grignard reagent, at room temperature or above, substitution at the boron center also occurred. The 8‐chloro‐BODIPY was a particularly useful reagent for the preparation of 8‐aryl‐, 8‐alkyl‐, and 8‐vinyl‐substituted BODIPYs in very high yields, using Pd⁰‐catalyzed Stille cross‐coupling reactions. The X‐ray structures of eleven BODIPYs and two pyrroles are presented, and the spectroscopic properties of the synthesized BODIPYs are discussed.     

Linear π‐conjugated polymers containing 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit: Synthesis and optical properties

Some linear π‐conjugated polymers containing 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit were synthesized via Sonogashira or Suzuki reaction for the first time and characterized by IR, NMR, and GPC. Because of the introduction of 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit into π‐conjugated system, all polymers exhibited good thermal stability with high decomposition temperature. Their optical and electrochemical properties were investigated. Based on the 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit linked with different aromatic rings, the polymers showed the tunable fluorescence from blue to blue‐green emission with satisfied quantum yield. Cyclic voltammetry measurement indicated that the LUMO and HOMO levels of the polymers could be adjustable through the main‐chain structural modification. All polymers had low LUMO level (?2.86 to ?3.06 eV) due to the high‐electron affinity of triazine unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 702–712, 2008     

Cell‐Derived Vesicles for Single‐Molecule Imaging of Membrane Proteins

A new approach is presented for the application of single‐molecule imaging to membrane receptors through the use of vesicles derived from cells expressing fluorescently labeled receptors. During the isolation of vesicles, receptors remain embedded in the membrane of the resultant vesicles, thus allowing these vesicles to serve as nanocontainers for single‐molecule measurements. Cell‐derived vesicles maintain the structural integrity of transmembrane receptors by keeping them in their physiological membrane. It was demonstrated that receptors isolated in these vesicles can be studied with solution‐based fluorescence correlation spectroscopy (FCS) and can be isolated on a solid substrate for single‐molecule studies. This technique was applied to determine the stoichiometry of α3β4 nicotinic receptors. The method provides the capability to extend single‐molecule studies to previously inaccessible classes of receptors.     

Two‐Photon Absorption Cross‐Sections of Reference Dyes: A Critical Examination

The electronic structure and one‐ and two‐photon absorption spectra of four fluorophores, p‐bis(o‐methoxystyryl)benzene (Bis‐MSB), coumarin 307, fluorescein and rhodamine B, commonly used as reference compounds for two‐photon absorption spectra, have been theoretically calculated and compared with available experimental data. The possible reasons for the wide discrepancies in two‐photon absorption cross‐sections reported in the literature are discussed on the basis of the theoretical findings. The role of a solvent environment on the electronic one‐ and two‐photon absorption spectra is also studied. We highlight some necessary precautions that one needs to take when comparing literature results of two‐photon absorption cross‐sections.     

Synthesis and Optical Properties of 2,13‐Dibenzothiazol‐2′‐yldibenzo[b,k]‐18‐crown‐6

A new crown ether of 2,13‐dibenzothiazol‐2′‐yldibenzo[b,k]‐18‐crown‐6 was synthesized from 2,13‐diformyl‐ dibenzo[b,k]‐18‐crown‐6 with 2‐aminothiophenol. The binding behavior and the optical properties of the crown ether were examined through UV‐visible spectroscopy and fluorescence spectroscopy. When complexed with Na⁺, K⁺, Rb⁺ and Cs⁺ ions, it led to intramolecular charge transfer and caused the changes of the fluorescence spectra. The protonation of the crown ether was also studied.     

Synthesis and characterization of poly(1,4‐bis((E)‐2‐(3‐dodecylthiophen‐2‐yl)vinyl)benzene) derivatives

New amorphous semiconducting copolymers, poly(9,9‐dialkylfluorene)‐alt‐(3‐dodecylthienyl‐divinylbenzene‐3‐dodecylthienyl) derivatives (PEFTVB and POFTVB), were designed, synthesized, and characterized. The structure of copolymers was confirmed by H NMR, IR, and elemental analysis. The copolymers showed very good solubility in organic solvents and high thermal stability with high T_g of 178–185 °C. The weight average molecular weight was found to be 107,900 with polydispersity of 3.14 for PEFTVB and 76,700 with that of 3.31 for POFTVB. UV–vis absorption studies showed the maximum absorption at 428 nm (in solution) and 435 nm (in film) for PEFTVB and at 430 nm (in solution) and 436 nm (in film) for POFTVB. Photoluminescence studies showed the emission at 498 nm (in solution) and 557 nm (in film) for PEFTVB and at 498 nm (in solution) and 536 nm (in film) for POFTVB. The solution‐processed thin‐film transistors showed the carrier mobility of 2 × 10^?4 cm² V^?1 s^?1 for PEFTVB‐based devices and 2 × 10^?5 cm² V^?1 s^?1 for POFTVB‐based devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3942–3949, 2010     

D-π-A型三联吡啶衍生物的合成及光学性质

以4'-(4-甲苯基)-2,2'∶6',2″-三联吡啶为电子受体(A)基元, 通过Wittig反应引入电子给体(D)基元, 合成了2个新的D-π-A型三联吡啶衍生物; 研究了其单、 双光子吸收荧光特性, 并通过量子化学计算从结构角度进行了解释. 目标产物的荧光量子产率(Ф)最高达到0.45, 双光子吸收截面(δ₂)最大达406 GM.