Carbonaceous species of TSP in urban and rural sites around coal-fired power stations in northwestern Greece

Total suspended particles from urban and rural locations around an industrial complex with four coal-fired power stations were collected for a period of 6 months (January-June 2001). Mass concentrations of TSP and carbonaceous species (TC, EC, OC and BC) were determined for seven sampling sites of the studied area. The contribution of TC mass to the total particle mass was similar for all sites with an average value of 12.36±1.27%. The fraction of elemental carbon (EC) was estimated between 32 and 46% of the total carbon (TC). The relationship between organic and elemental carbon showed the primary origin of organic carbon (direct emissions). The OC/BC ratio values were also considered in order to get information about the enrichment of aerosols in organic carbon. Four conditional categories out of the sampling site ‘collection were additionally extracted (“urban”, “rural”, “far” and “close” location to the power stations) and considered with respect to the values of the ratios OC/BC and OC/EC and the multiple correlation coefficients R² for the concentrations of OC, BC and EC. It has been found that in some cases the correlation coefficients rather than the ratios could inform on the type of site.     

THEORETICAL COMPARISON OF THE BONDING OF CHALCOCARBONYL LIGANDS

Abstract

Fenske-Hall molecular orbital calculations on the complexes CpFe(CO)₂(CX)⁺ (X = O, S, Se, and Te) have been used to quantify the nature of bonding between the CX ligands and the metal atom. In addition, conclusions have been reached about the reactivity of the complexes under both nucleophilic and electrophilic attack. The previously established trend of increasing metal—ligand bond strength as X changes from O to S to Se is demonstrated by our molecular orbital calculations, and found to extend to Te. The mechanism for nucleophilic attack, variously explained in the past by either charge control or orbital control, is quantitatively ascribed to orbital control only. The nature of electrophilic attack on these complexes is also found to begin with orbital control.     

多孔炭材料的研究进展及前景

近年来多孔炭材料在国内外的研究和开发应用都十分活跃。本文从制备原料的扩展, 形态特征的增多, 纳米空间的控制, 功能特性的改进, 微细组织的察, 应用途径的开拓等不同方面综述了多孔炭材料的研究和应用开发的新进展。     

Spiro-Carbon: A Metallic Carbon Allotrope Predicted from First Principles Calculations

A structurally stable microporous metallic carbon allotrope, poly(spiro[2.2]penta-1,4-diyne) or, for short, spiro-carbon, with I4₁/amd (D_4h) symmetry is predicted by first-principles calculations using density functional theory (DFT). The calculations of electronic, vibrational, and structural properties show that spiro-carbon has lower relative energy than other elusive carbon allotropes such as T-Carbon and 1-diamondyne (Y-Carbon). Its structure can be pictured as a set of trans-cisoid-polyacetylene chains tangled and interconnected together by sp³ carbon atoms. Calculations reveal a metallic electronic structure arising from an “intrinsic doping” of trans-cisoid-polyacetylene chains with sp³ carbon atoms. Possible synthetic routes and various simulated spectra (XRD, NMR, and IR absorption) are provided in order to guide future efforts to synthesize this novel material.     

新型碳材料作为直接醇类燃料电池催化剂载体的评述

 电催化反应过程涉及固、液、气传输以及电子和质子传导, 为确保反应的顺利进行和提高催化剂中贵金属的利用率及延长催化剂的寿命, 理想的电催化剂载体必须同时具备高比表面积、导电性好、合适的孔结构、耐腐蚀以及合适的表面基团等. 为此, 碳载体的改性工作受到关注, 常用的方法是通过酸、碱、氧化和高分子等手段改变载体的结构和表面性质, 以期接近理想电催化剂载体的要求; 同时在开发新型碳载体方面做了更大量的工作. 本文简要评述了商品炭载体如碳黑 Vulcan XC-72R 以及其它的乙炔黑、黑珍珠-2000、Printex XE-2 和 Ketjen Black EC 等碳材料在直接醇燃料电池中的应用, 但对纳米碳纤维、碳纳米管、有序多孔碳、中间相碳小球、碳纳米角、碳纳米卷和碳气凝胶等新型碳载体则进行了较全面的评述. 与商品碳载体相比, 新型碳载体在一定程度上都表现出比 XC-72R 更优的性能, 这主要是因为新型碳材料具有特殊的结构、更高的结晶性能 (导电性) 和更好的传质能力.     

Gasification of hydrolysis lignin with CO2 in the presence of Fe and Co compounds

The effect of the nature of the metal (Fe and Co) deposited on the surface of hydrolysis lignin, as well as the metal content (1, 3, 5 and 7 wt%), on the process of dry catalytic lignin reforming has been studied. The use of the catalyst led to a twofold increase in the conversion of carbon dioxide at temperatures of 500–800 °C, while both metals showed similar activity. The maximum specific catalytic effect is achieved when supporting 7 wt% of active metals.     

Applying diamond like carbon layer on carbon/carbon composites and its effect on the deposition of hydroxyapatite coating

The biomedical application of carbon/carbon (C/C) composites is limited by lacking bioactivity and releasing carbon debris. Hydroxyapatite (HA) coating has been used to improve the bioactivity of C/C composites, but it cannot reduce the release of carbon debris effectively because of poor wear resistance property. In this work, a wear‐resistant layer of diamond like carbon (DLC) is applied on C/C composites, followed by an ultrasound‐assisted electrochemical deposition to prepare HA coatings. The microstructure, morphology and chemical composition of the DLC layer and the HA coating are characterised by scanning electron microscopy, X‐ray diffraction, energy dispersive spectroscopy (EDS), X‐ray photoelectron spectroscopy, Fourier transformed infrared spectroscopy and Raman spectrum. The bonding strength between the HA coating and the DLC layer modified C/C composites is examined by a tensile test. The results show that the DLC layer has a spherical morphology and provides a uniform surface for the deposition of the HA coating. The HA coating shows flaky morphology with a compact structure. The tensile strength of the HA coating on the DLC layer modified C/C composites is 6.24 ± 0.40 MPa, which is significantly higher than that of HA coating on unmodified C/C composites(3.04 ± 0.20 MPa). Copyright © 2013 John Wiley & Sons, Ltd.     

炭材料对铀的吸附

铀既是核燃料的主要成分又是乏燃料后处理的关键核素。将铀从乏燃料后处理流程中的高放射性料液或者其他含铀废水中分离出来既可以将此宝贵的核燃料回收使用,又有利于降低乏燃料处理后期的处置费用,以及减少铀对环境的污染。而从海水、盐湖水、尾矿废水等贫铀水体中提取铀则可能是解决将来铀资源匮乏的主要方法。炭质材料具有较大的比表面积、较高的孔隙率,耐高温,抗辐射,对各种酸碱环境有很高稳定性,而且本身无毒,环境友好,有望作为吸附剂或固相萃取材料用于从水体中吸附分离铀。本文介绍了活性炭、介孔炭、碳纳米管等材料对铀的吸附研究进展。表面功能化可以提高炭材料对铀酰离子的吸附容量与选择性,对炭材料功能化的方法主要有表面氧化、浸渍、负载和接枝等手段。由于化学稳定性高,采用化学方法在炭材料表面接枝功能分子是具有应用前景的研究方向。采用碳纤维作电极,电吸附铀的方法可以大量地从水溶液中将铀吸附到电极表面,再通过电脱附回收铀,具有工业化应用前景。     

多色荧光碳点的制备新进展

碳点(碳量子点)是在紫外-可见光吸收区域具有有效吸收的、可多色发光的新型碳纳米材料,在生物医学、环境能源和催化领域有着重要的研究应用前景。但是,在过去的10年中,无论是自上而下还是自下而上的方法,所制备碳点的发光大部分集中在蓝光-橙光范围。最近,随着制备方法的改进,有多种方法制备出了红光或近红外发光的碳点。本文简述了近3年来各类代表性的制备碳点的方法,并主要介绍了红光或近红外发光碳点的制备新进展。     

诺贝尔奖宠儿——碳元素的前世今生

碳元素历史悠久,与现代人类社会联系紧密,对人类未来意义重大,多次斩获诺贝尔奖。在揭开碳元素的发现史之后,介绍了活性炭、碳纤维、玻璃碳等无定形碳以及热解炭等过渡碳的重要作用。此外,晶形碳的经典同素异形体--C60富勒烯、碳纳米管、石墨烯的独特结构造就了其在纳米材料领域的非凡用途;新型同素异形体的合成、发现与应用更是碳元素研究领域的热点。     

广州大气细粒子中有机碳、元素碳和水溶性有机碳的分布特征

在广州市中山大学采样点进行了为期1年的大气细粒子(PM2.5)采样,监测分析得到PM2.5及有机碳(OC)、元素碳(EC)和水溶性有机碳(WSOC)等组分的质量浓度,并进行了比较和评价分析。结果表明广州市细粒子碳污染较严重。对OC、EC和WSOC质量浓度的月变化和季节变化特征进行了讨论,并分析了原因。OC、EC浓度相关性好,表明OC、EC来源大部分相同。根据OC/EC比值,估算二次有机碳(SOC)量,结果是SOC占OC的1/3。讨论了SOC和SOC/OC比值的季节分布,结果证明SOC夏季生成比冬季多。     

新型沥青基ACNT/C纳米复合材料的制备与表征

以超长定向碳纳米管(ACNTs)阵列为骨架，中温煤焦油沥青为浸渍剂，采用浸渍-炭化工艺经过一个循环制备了密度约为1.25 g·cm^-3的沥青基定向碳纳米管/炭(ACNT/C)纳米复合材料。采用扫描电子显微镜(SEM)、偏光金相显微镜(PLM)、X射线衍射(XRD)和Raman光谱分析对这种新型纳米炭材料进行了表征。结果表明ACNT/C中沥青炭为明显的各向异性组织，以碳纳米管为核心形成了非常细密的流线型层片结构，具有较高的晶化程度。采用热失重分析(TGA)方法考察了材料在空气中的热稳定性能，发现ACNT/C纳米复合材料在空气中的热失重初始温度比相同工艺条件下，以炭纤维为骨架制备的密度相近的炭/炭(C/C)复合材料提高了50 ℃左右。     

Supercritical,Freezing and Thermal Drying Process of Resorcinol‐Formaldehyde Polymer based Nano‐carbons and their Highly Loaded PtRu Anode Electrocatalyst for DMFC

The capillary condensation is affected by micropore and nanopore of catalyst layer on fuel cell. Due to limitation of sluggish mass transport and electrocatalytic activity, to retain the pore skeleton of carbon and metal nanoparticles are very significant for enhanced utilizations of pore structure in electrochemical reaction. Besides, thickness of electrocatalyst layer is very crucial due to one of the factor affected by cell performance of direct methanol fuel cell. Highly loaded four Pt?Ru anode catalysts supported on resorcinol‐formaldehyde (RF) polymer based on meso‐porous carbons (80 wt.% Pt?Ru/carbon cryogel, 80 wt.% Pt?Ru/carbon xerogel and 80 wt.% Pt?Ru/carbon aerogel) and conventional carbon (80 wt.% Pt?Ru/Vulcan XC‐72) were prepared by colloidal method for direct methanol fuel cell. These catalysts were characterized by X‐Ray diffraction (XRD), High resolution transmission electron microscopy (HR‐TEM) and X‐ray photoemission (XPS). The results of CO stripping voltammetry, cyclic voltammetry (CV) and single cell test performed on DMFC show that Pt?Ru/carbon cryogel and Pt?Ru/carbon aerogel exhibits better performances in comparison to Pt?Ru/carbon xerogel and Pt?Ru/Vulcan XC‐72. It is thus considered that particle size, oxidation state of metal and electrochemical active surface area of these catalysts are important role in electrocatalytic activity in DMFC.     

碳纳米管含量对炭炭复合材料组织及力学性能的影响

炭纤维上原位合成了均匀生长且具有伸张形貌的碳纳米管,借助化学气相渗透制备了碳纳米管增强的炭炭复合材料,研究了不同含量的碳纳米管对炭炭复合材料组织和力学性能的影响。结果表明：炭纤维上生长碳纳米管改变了热解炭的沉积行为,诱导了各向同性热解炭的生成,且随着碳纳米管含量的增加,各向同性热解炭的厚度增加,但是复合材料的d002值却明显降低。微量的碳纳米管即可显著提高复合材料的力学强度,随着其含量的增加,复合材料的力学强度和模量迅速提高,但材料的断裂行为却急剧恶化,断裂模式由最初的假塑性断裂转变为脆性断裂。     

热解碳包覆的碳纳米管复合二氧化锰薄膜超级电容器

通过化学气相沉积(CVD)的方法,在碳纳米管(CNT)薄膜及其连接处沉积热解碳(PC)来限制CNTs之间的滑移。通过扫描电镜(SEM)观察发现,热解碳(PC)的沉积使得CNT表面更加平整,且表面的孔洞更加均匀。通过应力应变及亲疏水性测试发现,CNT/PC复合薄膜的拉伸强度增加了200%,水与薄膜的静态接触角由123°减小到78°。其后通过电化学沉积的方法,制备得到CNT/PC/MnO2薄膜电极材料,通过电化学测试得知,在1 mA/cm^2的电流下单电极的比电容为326 mF/cm^2,可以稳定循环10000圈,电容的保持率稳定在100%左右。     

电化学双电层电容器用新型炭材料及其应用前景

活性炭是目前使用最为广泛的一种电化学双电层电容器（EDLC）的电极材料,但其固有的缺点制约了EDLC性能的进一步提高。用新型高性能炭电极材料可使EDLC比能量和比功率性能进一步提高。这些新型炭材料包括基于石墨层状结构的纳米门炭,基于碳纳米管阵列结构的毛皮炭,通过高温置换反应制备的骨架炭以及电极可整体成型的纳米孔玻态炭。本文介绍了这些炭材料的电化学特性及其在电化学双电层电容器中的应用,指出用这4种新型炭材料制备EDLC的比能量或比功率性能远高于目前活性炭基EDLC,具有良好的应用前景。     

化学气相沉积合成碳包裹镍纳米晶的初步研究

Nickel nanocrystals encapsulated in carbon shells were prepared by the large body knowledge developed for the growth of carbon nanotubes (CNTs), i.e. chemical vapor deposition. The products were characterized by transmission electron microscopy, XRD and FTIR. The results showed that the oxidization of CNT surface made it possible to interreact with nickel ions in solution. Ni-impregnated CNTs transformed into monocrystalline nickel nanoparticles supported on CNTs at 600 ℃ in nitrogen atmosphere. Subsequently, they would be covered with graphene layers during reaction with acetylene at 600 ℃. The formation mechanism has been preliminarily discussed on experimental results.     

多孔炭材料在纤维素催化转化中的应用

生物质作为自然界唯一可再生的有机碳资源,其利用受到了越来越多的关注。特别是随着能源和环境危机的日益加重,将生物质中非可食用部分催化转化为燃料及具有高附加值的化学品被认为是高效、环保、原子经济的绿色过程。同时,多孔炭材料具有丰富的孔道结构、优异的水热稳定性和大比表面积,是生物质催化转化反应中最常用的载体材料之一。兼之炭材料表面极性、亲疏水性的可调变性,及对酸碱溶剂的反应惰性,也使其无论在学术研究还是在工业应用中都具有特殊的优势。另外,随着纳米炭材料科学的飞速发展,合成孔径、形貌、及表面官能团可控的介孔炭和具有多级孔道结构的多孔炭材料成为可能,将其应用到纤维素催化转化过程中,对深入理解孔道结构、表面官能团对纤维素转化的作用,揭示催化反应作用机制,指导炭基催化剂的设计合成,均具有重要意义。在本综述中,我们首先对纤维素转化中多孔炭的孔道结构和表面官能团性质的独特作用进行了阐述。由于商业活性炭的孔径一般在微孔尺度,但纤维素及可溶低聚糖的分子体积较大,因而其在活性炭中的传质受到了极大的限制。通过模板法获得的介孔炭材料,可实现孔径在2–10 nm的可控合成,大大提高了反应物的扩散速率,使之能与催化活性位有效接触。但孔道过于狭长,在反应过程中堵塞的可能性增高,进而导致催化剂失活;因此,在介孔孔道的基础上,建立互通的多级孔道结构对反应物、中间物、和产物的扩散,及催化活性的保持更为有利。另一方面,炭材料表面的含氧官能团不仅具有加强1,4-糖苷键吸附的作用,还可以作为酸性活性中心催化水解反应的进行;尤其是在传统的水相纤维素催化转化过程中,亲水表面对多孔炭催化剂与反应物的接触非常有利。本文以纤维素水解及纤维素水解加氢反应为例,展开讨论了多孔炭作为固体酸及双功能催化剂载体的应用。在水解反应中,纤维素首先在热水中降解为可溶低聚糖,之后再与活性炭表面官能团反应;其中多孔炭的比表面积、酸量、及酸强度均是促进水解发生的正向因素。在水解加氢反应中,炭载贵金属催化剂作为最常用的加氢催化剂,可获得以六元醇为主的纤维素转化产物。除了加氢作用之外,贵金属小颗粒被证实可以通过氢溢流作用提供水解所需的H+,同时,正价的贵金属也可促进反应过程中的氢转移。另一方面,由于钨物种可催化逆羟醛缩合反应的发生,因此在反应体系中引入钨物种时,水解加氢的主要产物由六元醇变为乙二醇。需要特别指出的是,在纤维素催化水解加氢的过程中,多孔炭材料作为载体同样具有非常重要的作用：一方面,三维介孔的孔道结构不仅有利于反应物、产物的扩散,也有利于加氢金属催化剂的分散,进而提高金属的催化加氢能力;另一方面,当炭材料的表面化学性质改变时,也会影响产物的选择性分布,例如当炭表面显碱性时,由于异构化作用,丙二醇成为主要产物。本文最后,我们列举了一些新型多孔炭材料,包括杂原子改性的多孔炭材料和金属氧化物-炭复合多孔材料的合成方法及其在纤维素催化转化乃至生物质转化中的潜在应用。     

Nitrogen‐Doped Carbon Nanotube Arrays for High‐Efficiency Electrochemical Reduction of CO2: On the Understanding of Defects,Defect Density,and Selectivity

Nitrogen‐doped carbon nanotubes (NCNTs) have been considered as a promising electrocatalyst for carbon‐dioxide‐reduction reactions, but two fundamental chemistry questions remain obscure: 1) What are the active centers with respect to various defect species and 2) what is the role of defect density on the selectivity of NCNTs? The aim of this work is to address these questions. The catalytic activity of NCNTs depends on the structural nature of nitrogen in CNTs and defect density. Comparing with pristine CNTs, the presence of graphitic and pyridinic nitrogen significantly decreases the overpotential (ca. ?0.18 V) and increases the selectivity (ca. 80 %) towards the formation of CO. The experimental results are in congruent with DFT calculations, which show that pyridinic defects retain a lone pair of electrons that are capable of binding CO₂. However, for graphitic‐like nitrogen, electrons are located in the π* antibonding orbital, making them less accessible for CO₂ binding.