Aromatic and Antiaromatic Pathways in Triphyrin(2.1.1) Annelated with Benzo[b]heterocycles

Understanding of the aromatic properties and magnetically induced current densities of highly conjugated chromophores is important when designing molecules with strongly delocalized electronic structure. Linear extension of the triphyrin(2.1.1) skeleton with an annelated benzo[b]heterocycle fragment modifies the aromatic character by extending the electron delocalization pathway. Two-electron reduction leads to an antiaromatic triphyrin(2.1.1) ring and an aromatic benzo[b]heterocycle subunit. Current-density calculations provide detailed information about the observed pathways and their strengths.     

Ansa‐Complexes of [Mn(η5‐C5H5)(η6‐C6H6)]: Preparation,Characterization, and Reactivity of [n]Manganoarenophanes (n=1, 2, 3)

We report the synthesis of [n]manganoarenophanes (n=1, 2) featuring boron, silicon, germanium, and tin as ansa‐bridging elements. Their preparation was achieved by salt‐elimination reactions of the dilithiated precursor [Mn(η⁵‐C₅H₄Li)(η⁶‐C₆H₅Li)]?pmdta (pmdta=N,N,N′,N′,N′′‐pentamethyldiethylenetriamine) with corresponding element dichlorides. Besides characterization by multinuclear NMR spectroscopy and elemental analysis, the identity of two single‐atom‐bridged derivatives, [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] and [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SiPh₂], could also be determined by X‐ray structural analysis. We investigated for the first time the reactivity of these ansa‐cyclopentadienyl–benzene manganese compounds. The reaction of the distannyl‐bridged complex [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)Sn₂tBu₄] with elemental sulfur was shown to proceed through the expected oxidative addition of the Sn?Sn bond to give a triatomic ansa‐bridge. The investigation of the ring‐opening polymerization (ROP) capability of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] with [Pt(PEt₃)₃] showed that an unexpected, unselective insertion into the C_ipso?Sn bonds of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] had occurred.     

Heteroleptic [n]Chromoarenophanes: ansa Complexes Derived from [Cr(η5‐C5H5)(η6‐C6H6)]

The synthesis of ansa complexes has been studied intensively owing to their importance as homogeneous catalysts and as precursors of metal‐containing polymers. However, paramagnetic non‐metallocene derivatives are rare and have been limited to examples with vanadium and titanium. Herein, we report an efficient procedure for the selective dilithiation of paramagnetic sandwich complex [Cr(η⁵‐C₅H₅)(η⁶‐C₆H₆)], which allows the preparation of a series of [n]chromoarenophanes (n=1, 2, 3) that feature silicon, germanium, and tin atoms at the bridging positions. The electronic and structural properties of these complexes were probed by X‐ray diffraction analysis, cyclic voltammetry, and by UV/Vis and EPR spectroscopy. The spectroscopic parameters for the strained and less strained complexes (i.e., with multiple‐atom linkers) indicate that the unpaired electron resides primarily in a d orbital on chromium(I); this result was also supported by density functional theory (DFT) calculations. We did not observe a correlation between the experimental UV/Vis and EPR data and the degree of molecular distortion in these ansa complexes. The treatment of tin‐bridged complex [Cr(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] with [Pt(PEt₃)₃] results in the non‐regioselective insertion of the low‐valent Pt⁰ fragment into the C_ipso? Sn bonds in both the five‐ and six‐membered rings, thereby furnishing a bimetallic complex. This observed reactivity suggests that ansa complexes of this type are promising starting materials for the synthesis of bimetallic complexes in general and also underline their potential to undergo ring‐opening processes to yield new metal‐containing polymers.     

Lanthanide(III) Bis(phthalocyaninato)–[60]Fullerene Dyads: Synthesis,Characterization, and Photophysical Properties

A novel series of double‐decker lanthanide(III) bis(phthalocyaninato)–C₆₀ dyads [Ln^III(Pc)(Pc′)]–C₆₀ (M=Sm, Eu, Lu; Pc=phthalocyanine) ( 1 a – c ) have been synthesized from unsymmetrically functionalized heteroleptic sandwich complexes [Ln^III(Pc)(Pc′)] (Ln=Sm, Eu, Lu) 3 a – c and fulleropyrrolidine carboxylic acid 2 . The sandwich complexes 3 a – c were obtained by means of a stepwise procedure from unsymmetrically substituted free‐base phthalocyanine 5 , which was first transformed into the monophthalocyaninato intermediate [Ln^III(acac)(Pc)] and further reacted with 1,2‐dicyanobenzene in the presence of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU). ¹H NMR spectra of the bis(phthalocyaninato) complexes 3 a – c and dyads 1 a – c were obtained by adding hydrazine hydrate to solutions of the complexes in [D₇]DMF, a treatment that converts the free radical double‐deckers into the protonated species, that is, [Ln^III(Pc)(Pc′)H] and [Ln^III(Pc)(Pc′)H]–C₆₀. The electronic absorption spectra of 3 a – c and 1 a – c in THF exhibit typical transitions of free‐radical sandwich complexes. In the case of dyads 1 a – c , the spectra display the absorption bands of both constituents, but no evidence of ground‐state interactions could be appreciated. When the UV/Vis spectra of 3 a – c and 1 a – c were recorded in DMF, typical features of the reduced forms were observed. Cyclic voltammetry studies for 3 a – c and 1 a – c were performed in THF. The electrochemical behavior of dyads 1 a – c is almost the exact sum of the behavior of the components, namely the double‐decker [Ln^III(Pc)(Pc′)] and the C₆₀ fullerene, thus confirming the lack of ground‐state interactions between the electroactive units. Photophysical studies on dyads 1 a – c indicate that only after irradiation at 387 nm, which excites both C₆₀ and [Ln^III(Pc)(Pc′)] components, a photoinduced electron transfer from the [Ln^III(Pc)(Pc′)] to C₆₀ occurs.     

To Sandwich Technetium: Highly Functionalized Bis‐Arene Complexes [99mTc(η6‐arene)2]+ Directly from Water and [99mTcO4]−

The labeling of (bio)molecules with metallic radionuclides such as ^99mTc demands conjugated, multidentate chelators. However, this is not always necessary since phenyl rings can directly serve as integrated, organometallic ligands. Bis‐arene sandwich complexes are generally prepared by the Fischer–Hafner reaction. In extension of this, we show that [^99mTc(η⁶‐C₆R₆)₂]⁺‐type complexes are directly accessible from water and [^99mTcO₄]^?, even using arenes incompatible with Fischer–Hafner conditions. To unambiguously confirm the nature of these unprecedented ^99mTc complexes, their rhenium homologous have been prepared by substituting naphthalene ligands in [Re(η⁶‐C₁₀H₈)₂]⁺ with the corresponding phenyl groups. The ease with which highly stable [^99mTc(η⁶‐C₆R₆)₂]⁺ complexes are formed under standard labeling conditions enables a multitude of new potential imaging agents based on commercial pharmaceuticals or lead structures.     

Three ruthenocene derivatives: (η5‐4,7‐dimethylindenyl)(η5‐pentamethylcyclopentadienyl)ruthenium(II), [η5‐[2](4,7)indeno[2]paracyclophanyl](η5‐pentamethylcyclopentadienyl)ruthenium(II) and bis[η5‐[2](4,7)indeno[2]paracyclophanyl]­ruthenium(II)

In the title compounds, [Ru(C₁₀H₁₅)(C₁₁H₁₁)], (III), [Ru(C₁₀H₁₅)(C₁₉H₁₇)], (IV), and [Ru(C₁₉H₁₇)₂], (V), respectively, the coordinating ring systems are planar and parallel, with the Ru atoms lying at perpendicular distances of Ru–Cp* 1.790 (1) Å and Ru–indenyl 1.836 (1) Å in (III), Ru–Cp* 1.791 (1) Å and Ru–indenyl 1.837 (1) Å in (IV), and Ru–indenyl 1.812 (1) Å and 1.809 (1) Å in (V) (Cp* is penta­methyl­cyclo­penta­dienyl). The ring conformations are eclipsed for (III), staggered for (IV) and intermediate for (V). All three compounds show short intermolecular contacts from C—H groups to some ring centroids; these could be regarded as C—H?π hydrogen bonds. The mol­ecules of each compound are thus connected via the 2₁ screw axis to form layers parallel to the xy plane.     

Synthesis,Characterization and Reactivity of the Tricarbonyl(formylcycloheptatrienyl)iron‐Anion [(η3‐C7H6CHO)Fe(CO)3]−

Deprotonation of the readily available organometallic aldehyde derivative [(η⁴‐C₇H₇CHO)Fe(CO)₃] ( 2 ) with NaN(SiMe₃)₂ in benzene solution at ambient temperature afforded the anionic formylcycloheptatrienyl complex Na[(η³‐C₇H₆CHO)Fe(CO)₃] ( 3 ). The anion is fluxional in solution and displays a unique ambident reactivity towards electrophiles (MeI, Me₃SiCl). New substituted [(η⁴‐RC₇H₆CHO)Fe(CO)₃] and [(η⁴‐heptafulvene)Fe(CO)₃] complexes have been identified as the products. Treatment of 3 with 0.5 equivalents of dimeric [(COD)RhCl]₂ (COD = 1,5‐cyclooctadiene) afforded the functionalized Fe‐Rh cycloheptatrienyl complex [(μ‐C₇H₆CHO)(CO)₃FeRh(COD)] ( 7 ) in up to 86 % yield. Carbonylation of 7 under an atmosphere of CO led to facile conversion to the heterobimetallic pentacarbonyl derivative [(μ‐C₇H₆CHO)(CO)₃FeRh(CO)₂] ( 8 ), which is also accessible in lower yield from the direct reaction of 3 with [Rh(CO)₂Cl]₂.     

Chloro(η6‐p‐cymene)(phosphoramidite)ruthenium(II), a 16‐Electron Fragment Stabilized by an η2‐Aryl–Metal Interaction,and Its Use in Asymmetric Cyclopropanation

Chloride abstraction from the half‐sandwich complexes [RuCl₂(η⁶‐p‐cymene)(P*‐κP)] ( 2a : P* = (S_a,R,R)‐ 1a = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐1‐phenylethyl)]phosphoramidite; 2b : P* = (S_a,R,R)‐ 1b = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐(1‐(1‐naphthalen‐1‐yl)ethyl]phosphoramidite) with (Et₃O)[PF₆] or Tl[PF₆] gives the cationic, 18‐electron complexes dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐phenyl]ethyl}[(1R)‐1‐phenylethyl]phosphoramidite‐κP}ruthenium(II) hexafluorophosphate ( 3a ) and [Ru(S)]‐dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐naphthalen‐1‐yl]ethyl}[(1R)‐1‐(naphthalen‐1‐yl)ethyl]phosphoramidite‐κP)ruthenium(II) hexafluorophosphate ( 3b ), which feature the η²‐coordination of one aryl substituent of the phosphoramidite ligand, as indicated by ¹H‐, ¹³C‐, and ³¹P‐NMR spectroscopy and confirmed by an X‐ray study of 3b . Additionally, the dissociation of p‐cymene from 2a and 3a gives dichloro{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐(1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP)ruthenium(II) ( 4a ) and di‐μ‐chlorobis{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP}diruthenium(II) bis(hexafluorophosphate) ( 5a ), respectively, in which one phenyl group of the N‐substituents is η⁶‐coordinated to the Ru‐center. Complexes 3a and 3b catalyze the asymmetric cyclopropanation of α‐methylstyrene with ethyl diazoacetate with up to 86 and 87% ee for the cis‐ and the trans‐isomers, respectively.     

Natural‐Antioxidant‐Inspired Benzo[b]selenophenes: Synthesis,Redox Properties,and Antiproliferative Activity

The cyclization of arylalkynes under selenobromination conditions, combined with an acid‐induced 3,2‐aryl shift, was elaborated as a general synthetic pathway for the preparation of polyhydroxy‐2‐ and ‐3‐arylbenzo[b]selenophenes from the same starting materials. The redox properties, free‐radical‐scavenging ability, and cytotoxicity against malignant cell lines (MCF‐7, MDA‐MB‐231, HepG2, and 4T1) of the synthesized compounds were explored, and the obtained results were used to consider the structure–activity relationships (SARs) in these compounds. Consequently, the structural features that were responsible for the highly potent peroxyl‐radical‐scavenging activity were established.     

Synthesis and Nucleophilic Addition Reactions of Tricarbonyl[η5‐2‐(phenylthio)hexadienyl]iron Hexafluorophosphate

3‐Phenylthio‐3‐sulfolene ( 1 ) was readily converted to a C‐5 substituted product 2 , which upon thermolysis and complexation with Fe₂(CO)₉ gave (η⁴‐diene)iron complexes 3a and 3b . Treatment of 3a and 3b with aq. HPF₆ and Ac₂O provided the title compound 5 , which reacted regio‐ and stereospecifically with some nucleophiles to give the addition products 3b and 7 .     

Synthese,Struktur und Reaktivität von η3‐1,2‐Diphosphaallylkomplexen sowie von [{(η5‐C5H5)(CO)2W–Co(CO)3}{μ‐AsCH(SiMe3)2}(μ‐CO)]

Syntheses, Structure and Reactivity of η³‐1,2‐Diphosphaallyl Complexes and [{(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃}{μ‐AsCH(SiMe₃)₂}(μ‐CO)] Reaction of ClP=C(SiMe₂iPr)₂ ( 3 ) with Na[Mo(CO)₃(η⁵‐C₅H₅)] afforded the phosphavinylidene complex [(η⁵‐C₅H₅)(CO)₂Mo=P=C(SiMe₂iPr)₂] ( 4 ) which in situ was converted into the η¹‐1,2‐diphosphaallyl complex [η⁵‐(C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₂iPr)₂] ( 6 ) by treatment with the phosphaalkene tBuP=C(NMe₂)₂. The chloroarsanyl complexes [(η⁵‐C₅H₅)(CO)₃M–As(Cl)CH(SiMe₃)₂] [where M = Mo ( 9 ); M = W ( 10 )] resulted from the reaction of Na[M(CO)₃(η⁵‐C₅H₅)] (M = Mo, W) with Cl₂AsCH(SiMe₃)₂. The tungsten derivative 10 and Na[Co(CO)₄] underwent reaction to give the dinuclear μ‐arsinidene complex [(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃{μ‐AsCH(SiMe₃)₂}(μ‐CO)] ( 11 ). Treatment of [(η⁵‐C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₃)₂}] ( 1 ) with an equimolar amount of ethereal HBF₄ gave rise to a 85/15 mixture of the saline complexes [(η⁵‐C₅H₅)(CO)₂Mo{η²‐tBu(H)P–P(F)CH(SiMe₃)₂}]BF₄ ( 18 ) and [Cp(CO)₂Mo{F₂PCH(SiMe₃)₂}(tBuPH₂)]BF₄ ( 19 ) by HF‐addition to the PC bond of the η³‐diphosphaallyl ligand and subsequent protonation ( 18 ) and/or scission of the PP bond by the acid ( 19 ). Consistently 19 was the sole product when 1 was allowed to react with an excess of ethereal HBF₄. The products 6 , 9 , 10 , 11 , 18 and 19 were characterized by means of spectroscopy (IR, ¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR, MS). Moreover, the molecular structures of 6 , 11 and 18 were determined by X‐ray diffraction analysis.     

[μ‐1κ2O,O′:2(η5)‐Cyclopentadienylcarboxylato][2(η5)‐diphenylphosphinocyclopentadienyl]bis[1,1(η5)‐tetramethylcyclopentadienyl]iron(II)titanium(III)

Reacting stoichiometric amounts of 1‐(diphenylphosphino)ferrocene­carboxylic acid and [Ti(η⁵‐C₅HMe₄)₂(η²‐Me₃SiC[triple‐bond]CSiMe₃)] produced the title carboxyl­atotitanocene complex, [{μ‐1κ²O,O′:2(η⁵)‐C₅H₄CO₂}{2(η⁵)‐C₅H₄P(C₆H₅)₂}{1(η⁵)‐C₅H(CH₃)₄}₂Fe^IITi^III] or [FeTi(C₉H₁₃)₂(C₆H₄O₂)(C₁₇H₁₄P)]. The angle subtended by the Ti/O/O′ plane, where O and O′ are the donor atoms of the κ²‐carboxy­late group, and the plane of the carboxyl‐substituted ferrocene cyclo­penta­dienyl is 24.93 (6)°.     

Synthesis and Characterization of [Hg(sulfamethoxazolato)2]·2DMSO and[Cu2(μ‐CH3CO2)4(sulfamethoxazole)2]

[Hg(sulfamethoxazolato)₂]·2DMSO ( 1 ) and [Cu₂(CH₃COO)₄(sulfa‐methoxazole)₂] ( 2 ) can be obtained by the reaction of sulfamethoxazole with mercury acetate or copper acetate in methanol. The structures of the two complexes were characterized by single crystal X—ray diffractometry. Compound 1 consists of sulfamethoxazolato ligands bridging the metal ions building an unidimensional chain. Two solvent dimethylsulfoxide molecules are involved via N‐H···O hydrogen bridges. The mercury atom shows a linear primary coordination arrangement formed by two trans deprotonated sulfonamidic nitrogen atoms. The overall coordination around the metal atom may be regarded as a strongly distorted octahedron when the interactions of mercury with four sulfonamidic oxygen atoms [bond distances of 2.761(4) Å—2.971(4) Å] are also considered to build an equatorial plane and the N1 and N1′ atoms [bond distance of 2.037(5) Å] occupy the apical positions. Compound 2 is a dinuclear complex in which the copper ions are bridged by four syn‐syn acetate ligands which are related by a symmetry centre located in the centre of the complex. Each copper atom presents a nearly octahedral coordination where the equatorial plane is formed by four oxygen atoms and an isoxazolic nitrogen atom and the second copper atom occupy the apical positions.     

A Phosphorus Analogue of Bis(η4‐cyclobutadiene)iron(0)

P makes it possible : The convenient oxidative synthesis of the 16‐electron organophosphorus iron sandwich complex [Fe(η⁴‐P₂C₂tBu₂)₂] (see structure) suggests that the elusive all‐carbon complex [Fe(η⁴‐C₄H₄)₂] is a viable synthetic target.