Function‐Led Design of Aerogels: Self‐Assembly of Alloyed PdNi Hollow Nanospheres for Efficient Electrocatalysis

One plausible approach to endow aerogels with specific properties while preserving their other attributes is to fine‐tune the building blocks. However, the preparation of metallic aerogels with designated properties, for example catalytically beneficial morphologies and transition‐metal doping, still remains a challenge. Here, we report on the first aerogel electrocatalyst composed entirely of alloyed PdNi hollow nanospheres (HNSs) with controllable chemical composition and shell thickness. The combination of transition‐metal doping, hollow building blocks, and the three‐dimensional network structure make the PdNi HNS aerogels promising electrocatalysts for ethanol oxidation. The mass activity of the Pd₈₃Ni₁₇ HNS aerogel is 5.6‐fold higher than that of the commercial Pd/C catalyst. This work expands the exploitation of the electrocatalysis properties of aerogels through the morphology and composition control of its building blocks.     

Periodic Mesoporous Organosilica Materials: Self‐Assembly of Carbamothioic Acid‐Bridged Organosilane Precursors

A new series of carbamothioic acid‐containing periodic mesoporous organosilica (PMO) materials has been synthesized by a direct cocondensation method, in which an organosilica precursor N,S‐bis[3‐(triethoxysilyl)propyl]carbamothioic acid (MI) is treated with tetraethyl orthosilicate (TEOS), and the nonionic surfactant Pluronic 123 (P123) is used as a template under acidic conditions in the presence of inorganic additives. Moreover, the synthesis of the PMO material consisting of the MI precursor without TEOS has been realized. These novel PMO materials have large surface areas, well‐ordered mesoporous structures, hollow fiberlike morphologies, and thick walls. They are also structurally well‐ordered with a high organosilica precursor content, and the carbamothioic acid groups are thermally stable up to 250 °C. Furthermore, the organosilica materials exhibit hydrothermal stability in basic solution.     

Study of the Efficiency of UV and Visible‐Light Photocatalytic Oxidation of Methanol on Mesoporous RuO2–TiO2 Nanocomposites

Mesoporous RuO₂–TiO₂ nanocomposites at different RuO₂ concentrations (0–10 wt %) are prepared through a simple one‐step sol–gel reaction of tetrabutyl orthotitanate with ruthenium(III) acetylacetonate in the presence of an F127 triblock copolymer as structure‐directing agent. The thus‐formed RuO₂–TiO₂ network gels are calcined at 450 °C for 4 h leading to mesoporous RuO₂–TiO₂ nanocomposites. The photocatalytic CH₃OH oxidation to HCHO is chosen as the test reaction to examine the photocatalytic activity of the mesoporous RuO₂–TiO₂ nanocomposites under UV and visible light. The photooxidation of CH₃OH is substantially affected by the loading amount and the degree of dispersion of RuO₂ particles onto the TiO₂, which indicates the exclusive effect of the RuO₂ nanoparticles on this photocatalytic reaction under visible light. The measured photonic efficiency ξ=0.53 % of 0.5 wt % RuO₂–TiO₂ nanocomposite for CH₃OH oxidation is maximal and the further increase of RuO₂ loading up to 10 wt % gradually decreases this value. The cause of the visible‐light photocatalytic behavior is the incorporation of small amounts of Ru⁴⁺ into the anatase lattice. On the other hand, under UV light, undoped TiO₂ shows a very good photonic efficiency, which is more than three times that for commercial photocatalyst, P‐25 (Evonik–Degussa); however, addition of RuO₂ suppresses the photonic efficiency of TiO₂. The proposed reaction mechanism based on the observed behavior of RuO₂–TiO₂ photocatalysts under UV and visible light is explored.     

Dual‐Cargo Selectively Controlled Release Based on a pH‐Responsive Mesoporous Silica System

A pH‐controlled delivery system based on mesoporous silica nanoparticles (MSNs) was constructed for dual‐cargo selective release. To achieve a better controlled‐release effect, a modified sol–gel method was employed to obtain MSNs with tunable particle and pore sizes. The systems selectively released different kinds of cargo when stimulated by different pH values. At the lower pH value (pH 2.0) only one kind of cargo was released from the MSNs, whereas at a higher pH value (pH 7.0) only the other kind of cargo was released from the MSNs. The multi‐cargo delivery system has brought the concept of selective release to new advances in the field of functional nanodevices and allows more accurate and controllable delivery of specific cargoes, which is expected to have promising applications in nanomedicine.     

Different Synthesis Protocols for Co3O4–CeO2 Catalysts—Part 1: Influence on the Morphology on the Nanoscale

Co₃O₄‐modified CeO₂ (Co/Ce 1:4) was prepared by a combination of sol–gel processing and solvothermal treatment. The distribution of Co was controlled by means of the synthesis protocol to yield three different morphologies, namely, Co₃O₄ nanoparticles located on the surface of CeO₂ particles, coexistent Co₃O₄ and CeO₂ nanoparticles, or Co oxide structures homogeneously distributed within CeO₂. The effect of the different morphologies on the properties of Co₃O₄–CeO₂ was investigated with regard to the crystallite phase(s), particle size, surface area, and catalytic activity for CO oxidation. The material with Co₃O₄ nanoparticles finely dispersed on the surface of CeO₂ particles had the highest catalytic activity.     

Control of Chiral Nanostructures by Self‐Assembly of Designed Amphiphilic Peptides and Silica Biomineralization

Peptides, the fundamental building units of biological systems, are chiral in molecular scale as well as in spatial conformation. Shells are exquisite examples of well‐defined chiral structures produced by natural biomineralization. However, the fundamental mechanism of chirality expressed in biological organisms remains unclear. Here, we present a system that mimics natural biomineralization and produces enantiopure chiral inorganic materials with controllable helicity. By tuning the hydrophilicity of the amphiphilic peptides, the chiral morphologies and mesostructures can be changed. With decreasing hydrophilicity of the amphiphilic peptides, we observed that the nanostructures changed from twisted nanofibers with a hexagonal mesostructure to twisted nanoribbons with a lamellar mesostructure, and the extent of the helicity decreased. Defining the mechanism of chiral inorganic materials formed from peptides by noncovalent interactions can improve strategies toward the bottom‐up synthesis of nanomaterials as well as in the field of bioengineering.     

Assembly of BaTiO3 Nanocrystals into Macroscopic Aerogel Monoliths with High Surface Area

Aerogels with their low density and high surface area are fascinating materials. However, their advantageous morphology is still far from being fully exploited owing to their limited compositional variety and low crystallinity. Replacing the sol–gel process by a particle‐based assembly route is a powerful alternative to expand the accessible functionalities of aerogels. A strategy is presented for the controlled destabilization of concentrated dispersions of BaTiO₃ nanoparticles, resulting in the assembly of the fully crystalline building blocks into cylindrically shaped monolithic gels, thereby combining the inherent properties of ternary oxides with the highly porous microstructure of aerogels. The obtained aerogels showed an unprecedentedly high surface area of over 300 m² g^?1.     

Modular Thiol–Ene Chemistry Approach towards Mesoporous Silica Monoliths with Organically Modified Pore Walls

The surface modification of mesoporous silica monoliths through thiol–ene chemistry is reported. First, mesoporous silica monoliths with vinyl, allyl, and thiol groups were synthesized through a sol–gel hydrolysis–polycondensation reaction from tetramethyl orthosilicate (TMOS) and vinyltriethoxysilane, allyltriethoxysilane, and (3‐mercaptopropyl)trimethoxysilane, respectively. By variation of the molar ratio of the comonomers TMOS and functional silane, mesoporous silica objects containing different amounts of vinyl, allyl, and thiol groups were obtained. These intermediates can subsequently be derivatized through radical photoaddition reactions either with a thiol or an olefin, depending on the initial pore wall functionality, to yield silica monoliths with different pore‐wall chemistries. Nitrogen sorption, small‐angle X‐ray scattering, solid‐state NMR spectroscopy, elemental analysis, thermogravimetric analysis, and redox titration demonstrate that the synthetic pathway influences the morphology and pore characteristics of the resulting monoliths and also plays a significant role in the efficiency of functionalization. Moreover, the different reactivity of the vinyl and allyl groups on the pore wall affects the addition reaction, and hence, the degree of the pore‐wall functionalization. This report demonstrates that thiol–ene photoaddition reactions are a versatile platform for the generation of a large variety of organically modified silica monoliths with different pore surfaces.     

Large‐Scale Synthesis of MOF‐Derived Superporous Carbon Aerogels with Extraordinary Adsorption Capacity for Organic Solvents

Carbon aerogels (CAs) with 3D interconnected networks hold promise for application in areas such as pollutant treatment, energy storage, and electrocatalysis. In spite of this, it remains challenging to synthesize high‐performance CAs on a large scale in a simple and sustainable manner. We report an eco‐friendly method for the scalable synthesis of ultralight and superporous CAs by using cheap and widely available agarose (AG) biomass as the carbon precursor. Zeolitic imidazolate framework‐8 (ZIF‐8) with high porosity is introduced into the AG aerogels to increase the specific surface area and enable heteroatom doping. After pyrolysis under inert atmosphere, the ZIF‐8/AG‐derived nitrogen‐doped CAs show a highly interconnected porous mazelike structure with a low density of 24 mg cm^?3, a high specific surface area of 516 m² g^?1, and a large pore volume of 0.58 cm^?3 g^?1. The resulting CAs exhibit significant potential for application in the adsorption of organic pollutants.     

Chemical Preparation of Ferroelectric Mesoporous Barium Titanate Thin Films: Drastic Enhancement of Curie Temperature Induced by Mesopore‐Derived Strain

Mesoporous barium titanate (BT) thin films are synthesized by a surfactant‐assisted sol–gel method. The obtained mesoporous BT thin films show enhanced ferroelectricity due to the effective strains induced by mesopores. The Curie temperature (T_c) of the mesoporous BT reaches approximately 470 °C.     

Three‐Dimensional Macroassembly of Sandwich‐Like,Hierarchical, Porous Carbon/Graphene Nanosheets towards Ultralight,Superhigh Surface Area,Multifunctional Aerogels

A new, ultralight, superhigh surface area, multifunctional aerogel, which is macroassembled from sandwich‐like, hierarchical, porous carbon/graphene nanosheets, is described. The multifunctional aerogel was characterized by means of XRD, SEM, TEM, Raman spectroscopy, and UV/Vis absorption spectroscopy. The multifunctional aerogel had an ultralow density of 8 mg cm^?3 and a superhigh surface area of 2650 m² g^?1. The multifunctional aerogel was thermal stability and compressible. Meanwhile, the multifunctional aerogel exhibited high capacity for the adsorption of oils and organic solvents, unexpectedly high hydrogen adsorption and good electrochemical performance.