First palladium-catalyzed denitrated coupling of nitroarenes with sulfinates

The first example of palladium-catalyzed protocol for the denitrated coupling of nitroarenes with sulfinates was developed, achieving aryl and heterocyclic sulfones in moderate to excellent yields. The cyclopalladated ferrocenylimine (I) exhibited highly catalytic activity for this transformation with low catalyst loading (0.75 mol %). The efficiency of this reaction was demonstrated by compatibility with a wide range of groups. Thus, the method represents a simple and facile procedure to access aryl and heterocyclic sulfones.     

An efficient Stille cross‐coupling reaction catalyzed by ortho‐palladated complex of tribenzylamine under microwave irradiation

The catalytic activity of [Pd{C₆H₄(CH₂N(CH₂Ph)₂)}(μ‐Br)]₂ complex as an efficient, stable and catalyst that is non‐sensitive to air and moisture was investigated in the Stille cross‐coupling reaction of various aryl halides with phenyltributyltins under microwave irradiation. The substituted biaryls were produced in excellent yield in short reaction times using a catalytic amount of this complex in DMF at 100 C. The combination of dimeric complex as homogeneous catalyst and microwave irradiation and also DMF as microwave‐active polar solvent gave higher yields in shorter reaction times. Copyright © 2011 John Wiley & Sons, Ltd.     

Fluoride effect on the palladium–phenanthroline catalyzed carbonylation of nitroarenes to carbamates

Fluorides promote the palladium–phenanthroline catalyzed carbonylation of nitroarenes to carbamates. The effect is more evident on the rate of the reaction at short reaction times, but a positive effect on selectivity is also observed under certain conditions. The effect is observed even under conditions under which chloride inhibits the reaction. Tetraethylammonium is a better countercation than sodium. Copyright © 2007 John Wiley & Sons, Ltd.     

The palladium‐catalyzed C‐N cross‐coupling reaction of diheteroaryl disulfides with heterocyclic amines

The Pd‐catalyzed cross‐coupling reaction of 1, 2‐di(pyrimidin‐2‐yl) disulfides with heterocyclic amines including 2‐amino pyrimidines and 1,3,4‐thiadiazol‐2‐amines to deliver symmetrical C‐N coupling products in moderate to good yields is reported. This method provides an opportunity for synthesis of bioactive molecules and pharmaceutically interesting compounds containing heterocycle motifs. The reported protocol shows good functional group compatibility, and provides a new strategy for preparation of C2‐amination pyrimidine derivatives from heterocyclic disulfides.     

Cyclopalladated Ferrocenylimine Catalyzed Chlorination of 2‐Arylbenzoxazoles

An efficient and facile protocol for palladacycle‐catalyzed chlorination of 2‐arylbenzoxazoles was developed. The results represent the first examples involving the palladacycle as the catalyst for such chlorination. This chlorination was not a ligand‐directed ortho‐C H activation, but an electrophilic substitution process at the para‐position of the nitrogen atom in the benzo ring of benzoxazole moiety, the regiochemistry of which had been confirmed by HMBC spectral analysis. The catalytic system could tolerate various halogen atoms, such as F, Cl and Br, affording the corresponding products in moderate to excellent yields.     

Copper‐catalyzed C‐N coupling reaction of tosylhydrazones

Tosylhydrazones are a kind of labile and highly reactive compounds, which are apt to be transformed into reactive diazo compounds and then into extremely reactive carbenes under the basic condition. In order to fulfil the valuable C‐N coupling reaction, diaryliodonium salts are evaluated and prove to be a class of efficient electrophiles. The reaction with ligand‐free copper salt as catalyst shows a wide range of substrate scope. A plausible mechanism is proposed.     

Crosslinkable hole‐transporting polymers by palladium‐catalyzed C—N‐coupling reaction

Combination of spin‐coating and crosslinking allows low‐cost fabrication of large area displays with multiple layers by simple solution processing. For this purpose, a series of novel crosslinkable polymers containing hole‐transporting triarylamine units in the main chain were synthesized via palladium‐catalyzed C—N‐coupling reaction. Additionally, they contain varying amounts of polymerizable oxetane groups as side chains. The polymers were photo‐crosslinked to yield absolutely insoluble networks. Thin films were used as hole‐transport layer in two‐layer blue light‐emitting diodes.     

Efficient salicylaldimine ligands for a palladium‐catalyzed Suzuki–Miyaura cross‐coupling reaction

A series of salicylaldimine ligands were designed to promote palladium‐catalyzed Suzuki–Miyaura cross‐coupling reaction. After a screening process, a ligand with a bulky 2,4‐di‐tert‐butyl substituent on the salicyaldehyde backbone and cyclohexylamine moiety was found to serve as a good combination for this reaction in aqueous solutions of DMF. The protocol demonstrated a significant advance in the efficiency of the cross‐coupling of aryl bromides and aryl chlorides with arylboronic acids to produce the desired biaryl products. Copyright © 2012 John Wiley & Sons, Ltd.     

Carbon nanospheres with well‐controlled nano‐morphologies as support for palladium‐catalyzed Suzuki coupling reaction

Uniform carbon nanospheres (UCS) with well‐controlled nano‐morphologies were fabricated by hydrothermal carbonization of sucrose in the presence of kayexalate. Highly dispersed and ultrafine palladium nanoparticles were supported on the UCS through a facile co‐reduction process with NaBH₄ as reducing agent. The obtained Pd@UCS exhibited efficient catalytic activity for the Suzuki coupling reaction. Moreover, the as‐prepared catalyst could be recycled and reused at least five times without significant loss of its catalytic activity.     

Hydrogenation of nitroarenes catalyzed by a dipalladium complex

A dipalladium complex [Pd₂( L )Cl₂](PF₆)₂ ( 2 ), via the substitution of (PhCN)₂PdCl₂ with 5‐phenyl‐2,8‐bis(6′‐bipyridinyl)‐1,9,10‐anthyridine ( L ) followed by the anion exchange, was found to be a good pre‐catalyst for the reduction of nitroarenes to yield the corresponding anilines under atmospheric pressure of hydrogen in methanol. This method provides a straightforward access to a diverse array of functionalized anilines, exhibiting a possible application in synthetic chemistry. The catalytic activity of this complex is enhanced by the di‐metallic system via the synergistic effect.     

The thermoregulated ligand–palladium‐catalyzed carbonylative Sonogashira coupling of aryl iodides with terminal alkynes in water

The carbonylative Sonogashira coupling of aryl iodides with terminal alkynes was studied by using thermoregulated ligand–palladium as an efficient and reusable catalyst at 80 °C in water. The corresponding alkynone products were obtained in good to excellent yields under 1 atm of carbon monoxide. The isolation of the products was readily achieved by extraction with ethyl acetate, and the catalyst recovered in water can be reused and recycled up to four times without significant loss in catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Ammonium Chloride Promoted Palladium-Catalyzed UIImann Coupling of Aryl Bromide

In water, ammonium chloride was found to promote palladium-catalyzed Ullmann coupling reactions of aryl bromides. In the presence of Pd/C, zinc, NH4Cl, and water, coupling of various aryl bromides was carried out smoothly to afford the corresponding homocoupling products in moderate yields.     

Catalytic activity of 1‐methylimidazole‐based phosphine ligands in the palladium‐catalyzed Suzuki coupling reaction

The catalytic activities of three N‐methylimidazole‐based phosphine ligands in the Suzuki coupling reaction were tested using PdCl₂ as the catalyst. The results showed all three phosphine ligands exhibited excellent activity towards the Suzuki reaction, and the catalytic activity decreased with increasing number of imidazole groups. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermoregulated ligand–palladium‐catalyzed Suzuki reaction in water

An efficient and recyclable protocol for the Suzuki reaction in water has been developed based on the cloud point of thermoregulated ligand Ph₂P(CH₂CH₂O)_nCH₃ (n = 22). This method allows the preparation of a variety of biaryls in high yields and the catalytic system can be recycled four times with high efficiency. Copyright © 2010 John Wiley & Sons, Ltd.     

Desulfinative palladium‐catalyzed cross‐coupling of arylsulfonyl hydrazides with aryl bromides under air

A highly efficient and mild palladium‐catalyzed cross‐coupling of arylsulfonyl hydrazides and aryl bromides for the selective synthesis of unsymmetrical biaryls has been developed. This methodology has the advantages of easily accessible starting materials, functional group tolerance and a wide range of substrates, which provide rapid access to biaryls derivatives. In this protocol, abundant and stable aryl bromides serve as the aryl sources by coupling reaction of the aryl group generated from arylsulfonyl hydrazides via in situ release of nitrogen and sulfur dioxide. No external oxidants or acids are needed for this kind of transformation.     

Ligand effects in palladium‐catalyzed Suzuki and Heck coupling reactions

A range of sterically hindered diimine ligands and their palladium (II) complexes were synthesized. These compounds were fully characterized by elemental analysis, ¹H and ¹³C‐NMR spectroscopy. The use of the palladium complexes as catalysts for Suzuki and Heck coupling has been studied in an attempt to demonstrate the effect of side groups on catalytic activity. It was clearly seen that the location of side ? CH₃ groups which bound to benzene ring had little effect on catalytic activity. Interestingly when we changed these ? CH₃ groups with ? Cl groups the activity of the complexes increased. On the other hand, side groups which bound to imine nitrogen also had a large effect on catalytic activity. Copyright © 2008 John Wiley & Sons, Ltd.     

A convenient and practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with formic acid as carbon monoxide source

A practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with arylboronic acids under carbon monoxide gas‐free conditions has been developed using a bidentate phosphino‐functionalized magnetic nanoparticle‐immobilized palladium(II) complex as catalyst. Formic acid was utilized as the carbon monoxide source with dicyclohexylcarbodiimide as the activator, and a wide variety of biaryl ketones were generated in moderate to high yields. The new heterogeneous palladium catalyst can be prepared via a simple procedure and can easily be separated from a reaction mixture by simply applying an external magnet and recycled up to 10 times without any loss of activity.     

Unexpected regioselectivity in the palladium‐catalyzed reaction of silacyclobutanes with aryl iodides

The reaction of aryl iodides with 1,1‐diphenyl‐silacyclobutane in the presence of a catalytic amount of Pd(PPh₃)₄ affords unexpected ring‐opening adducts, 1‐ and 2‐propenyl(triaryl)‐silanes, in good yields. On the other hand, the PdCl₂(PhCN)₂‐catalyzed reaction of 1,1‐diphenylsilacyclobutanes with aryl halides gives ­unexpected products, triarylsilanols, after ­hydrolysis in moderate yields. The catalysis involves the reaction of aryl–palladium intermediates with silacyclobutanes along with ­regioselective aryl–silicon bond formation. Copyright © 2001 John Wiley & Sons, Ltd.     

Silver‐catalyzed Glaser coupling of alkynes

Excellent yields were obtained from the silver nitrate‐catalyzed homocoupling reaction of alkynes in N,N‐dimethylformamide using triphenylphosphine as ligand. This safe and simple silver catalytic system has been employed in a safe and efficient protocol for the synthesis of various 1,3‐diyne products from the corresponding aromatic or aliphatic alkynes with good air stability and absence of side products. Copyright © 2015 John Wiley & Sons, Ltd.     

Efficient pyridylbenzamidine ligands for palladium‐catalyzed Suzuki–Miyaura reaction

A series of pyridylbenzamidine ligands were applied in palladium‐catalyzed Suzuki–Miyaura reactions and the effect of ligand on catalytic properties was evaluated. Under the optimization conditions, the bulky and electron‐donating nitrogen donor ligands were successfully used to catalyze the reaction of a variety of aryl bromides and aryl chlorides with arylboronic acid, giving the desired products in moderate to high yields. Copyright © 2012 John Wiley & Sons, Ltd.