Protecting‐Group‐Controlled Surface Chemistry—Organization and Heat‐Induced Coupling of 4,4′‐Di(tert‐butoxycarbonylamino)biphenyl on Metal Surfaces

Like pearls on a string , molecular building blocks have been preorganized and then interlinked on a surface (see STM images). In this way both the supramolecular self‐assembly of the reactants as well as the subsequent thermal activation to release the protecting group are controlled.

     

A “click” approach to ROMP block copolymers

Amphiphilic block copolymers can be conveniently prepared via convergent syntheses, allowing each individual polymer block to be prepared via the polymerization technique that gives the best architectural control. The convergent “click‐chemistry” route presented here, gives access to amphiphilic diblock copolymers prepared from a ring opening metathesis polymer and polyethylene glycol. Because of the high functional group tolerance of ruthenium carbene initiators, highly functional ring opening metathesis polymerization (ROMP) polymer blocks can be prepared. The described synthetic route allows the conjugation of these polymer blocks with other end‐functional polymers to give well‐defined and highly functional amphiphilic diblock copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2913–2921, 2008     

Concentration induced the interfacial self‐assembly polymorphism of 4, 4′‐dihexadecyloxy‐benzophenon by scanning tunneling microscopy

The concentration effect on a two‐dimensional (2D) self‐assembly of 4, 4′‐dihexadecyloxy‐benzophenon (DHB) has been investigated by scanning tunneling microscopy. The self‐assembly of DHB at the phenyloctane/graphite interface was concentration dependent. Under low concentration, the DHB molecules were adsorbed intactly on the graphite surface. With the increasing of concentration, one of side chains connecting the conjugated moiety stretched into the liquid phase. The coexistence of two self‐assembled structures was observed in a moderate concentration. The result indicated that the van der Waals interactions between the molecules and the graphite lattice were decreasing with the increasing concentration. After the samples were placed in ambient conditions over 24 h, a different self‐assembled structure was obtained on the gas/solid interface, in which the DHB molecules were adsorbed on the surface with only one of the side chains. Both the benzophenon core and the other side chain were extended to the gas phase. The results demonstrated that concentration played an important role in forming the 2D molecular self‐assembly and provided an efficient approach for the control of the DHB molecular nanostructure. Copyright © 2013 John Wiley & Sons, Ltd.     

Supramolecular Cl⋅⋅⋅H and O⋅⋅⋅H Interactions in Self‐Assembled 1,5‐Dichloroanthraquinone Layers on Au(111)

The role of halogen bonds in self‐assembled networks for systems with Br and I ligands has recently been studied with scanning tunneling microscopy (STM), which provides physical insight at the atomic scale. Here, we study the supramolecular interactions of 1,5‐dichloroanthraquinone molecules on Au(111), including Cl ligands, by using STM. Two different molecular structures of chevron and square networks are observed, and their molecular models are proposed. Both molecular structures are stabilized by intermolecular Cl???H and O???H hydrogen bonds with marginal contributions from Cl‐related halogen bonds, as revealed by density functional theory calculations. Our study shows that, in contrast to Br‐ and I‐related halogen bonds, Cl‐related halogen bonds weakly contribute to the molecular structure due to a modest positive potential (σ hole) of the Cl ligands.     

An “Ingredients” Approach to Functional Self‐Synthesizing Materials: A Metal‐Ion‐Selective,Multi‐Responsive,Self‐Assembled Hydrogel

New methodology for making novel materials is highly desirable. Here, an “ingredients” approach to functional self‐assembled hydrogels was developed. By designing a building block to contain the right ingredients, a multi‐responsive, self‐assembled hydrogel was obtained through a process of template‐induced self‐synthesis in a dynamic combinatorial library. The system can be switched between gel and solution by light, redox reactions, pH, temperature, mechanical energy and sequestration or addition of Mg^II salt.     

An Allosteric Receptor by Simultaneous “Casting” and “Molding” in a Dynamic Combinatorial Library

Allosteric synthetic receptors are difficult to access by design. Herein we report a dynamic combinatorial strategy towards such systems based on the simultaneous use of two different templates. Through a process of simultaneous casting (the assembly of a library member around a template) and molding (the assembly of a library member inside the binding pocket of a template), a Russian‐doll‐like termolecular complex was obtained with remarkable selectivity. Analysis of the stepwise formation of the complex indicates that binding of the two partners by the central macrocycle exhibits significant positive cooperativity. Such allosteric systems represent hubs that may have considerable potential in systems chemistry.     

“Sandglass”‐Shaped Self‐Assembly of Coil–rod–coil Triblock Copolymer Containing Rigid Aniline‐Pentamer

The amphiphilic PEG_{1 500}‐b‐EM AP‐b‐PEG_{1 500} (EM PAP) triblock copolymer of poly(ethylene glycol) (PEG) and emeraldine aniline‐pentamer (EM AP) in its concentrated solution can self‐assemble into a special shape like “sandglass”, as observed by transmission electron microscopy (TEM), field emission scanning electron microscopy (ESEM) and atomic force microscopy (AFM). This “sandglass”‐shaped assembly is composed of several “rods” aggregated in the middle, with every “rod” being about 8 µm in length and 300 nm in diameter. We conclude that the special “sandglass”‐shaped assembly may come into being because of the inducement effect of the crystallization of EM AP segments, by studying electron diffraction (ED) results and wide‐angle X‐ray diffusion (WAXD) characterization of the EM PAP triblock copolymer.

     

Supramolecular Assembly of a 2D Binary Network of Pentacene and Phthalocyanine on Cu(100)

A crystalline nanoporous molecular network was tailored by supramolecular assembly of pentacene and F₁₆CuPc on Cu(100). The structure and self‐assembly mechanisms of the pure and binary layers were analyzed by STM. F₁₆CuPc films and mixed layers of pentacene/F₁₆CuPc in a ratio of 2:1 show two enantiomorphic chiral domains with high structural order in contrast to pentacene which exhibits no long‐range order in pure films. A model of the epitaxial relationship on Cu(100) is given, which suggests C? F???H bonding as a possible driving force for the bimolecular self‐assembly in addition to the still strong interaction between the substrate and the organic bilayer.     

STM Insight into Hydrogen‐Bonded Bicomponent 1 D Supramolecular Polymers with Controlled Geometries at the Liquid–Solid Interface

Bicomponent supramolecular polymers , consisting of two alternating molecules bridged through six H‐bonds, are observed by STM at the solid–liquid interface. Control of the geometry of the 1D architecture was obtained by using two different connecting molecules with different conformational rigidity, affording either linear (see picture, left) or zigzag (right) motifs.

     

Photocontrol Over Self‐Assembled Nanostructures of π–π Stacked Dyes Supported by the Parallel Conformer of Diarylethene

Diarylethenes (DAEs) have rarely been used in the design of photoresponsive supramolecular assemblies with a well‐defined morphology transition owing to rather small structural changes upon photoisomerization. A supramolecular design based on the parallel conformation of DAEs enables the construction of photoresponsive dye assemblies that undergo remarkable nanomorphology transitions. The cooperative stacking of perylene bisimide (PBI) dyes was used to stabilize the parallel conformer of DAE through complementary hydrogen bonds. Atomic force microscopy, UV/Vis spectroscopy, and molecular modeling revealed that our DAE and PBI building blocks coassembled in nonpolar solvent to form well‐defined helical nanofibers featuring J‐type dimers of PBI dyes. Upon irradiating the coassembly solution with UV and visible light in turn, a reversible morphology change between nanofibers and nanoparticles was observed. This system involves the generation of a new self‐assembly pathway by means of photocontrol.     

A Mechanochemically Triggered “Click” Catalyst

“Click” chemistry represents one of the most powerful approaches for linking molecules in chemistry and materials science. Triggering this reaction by mechanical force would enable site‐ and stress‐specific “click” reactions—a hitherto unreported observation. We introduce the design and realization of a homogeneous Cu catalyst able to activate through mechanical force when attached to suitable polymer chains, acting as a lever to transmit the force to the central catalytic system. Activation of the subsequent copper‐catalyzed “click” reaction (CuAAC) is achieved either by ultrasonication or mechanical pressing of a polymeric material, using a fluorogenic dye to detect the activation of the catalyst. Based on an N‐heterocyclic copper(I) carbene with attached polymeric chains of different flexibility, the force is transmitted to the central catalyst, thereby activating a CuAAC in solution and in the solid state.     

Synthesis and clustering of supramolecular “graft” polymers

The synthesis and melt rheology of supramolecular poly(isobutylene) polymers bearing statistically distributed hydrogen‐bonding moieties is reported, aiming at understanding the formation of the underlying supramolecular networks for self‐healing polymers. Two different hydrogen bonds were incorporated into a poly(isobutylene) (PIB) copolymer, one based on a (weak) pyridinium/pyridine interaction, the other based on a (stronger) 2,6‐diaminotriazine/thymine interaction. A direct copolymerization based on living cationic polymerization of isobutene and the comonomers 1 , 2 , and 4 in amounts of 1 mol % lead to the copolymers PIB‐ 1 , PIB‐ 2 , and PIB‐ 4 with a content of ～1 mol % of comonomer and molecular weights ranging from ～2000 to 19,000 g mol^?1 (M_w/M_n ～ 1.2–1.5). Subsequent azide/alkyne “click” chemistry enabled the attachment of 2,6‐diaminotriazine‐ and thymine‐moieties to yield the copolymers PIB‐ 5 , PIB‐ 6 , and PIB‐ 7 . Proof of the statistical incorporation of ～1 mol % of hydrogen‐bonding moieties was achieved by ¹H NMR spectroscopy and matrix‐assisted laser desorption ionization measurements. The true presence of a supramolecular network in PIB‐ 1 (pyridinium/pyridine interaction) as well as with 1/1 blends of PIBs interacting via the 2,6‐diaminotriazine/thymine interaction (PIB‐ 5 /PIB‐ 6 ) was proven via the increasing plateau modulus with increasing molecular weights (5.5k, 9.9k, 12.4k, 16k, and 19k). Dynamics of the hydrogen bonds in the melt state was investigated by determining the effective cluster lifetime ( τ ) observing a clear difference in the (weaker) pyridinium/pyridine interaction ( τ ～ 1 s) to the 2,6‐ (stronger) diamintriazine/thymine interaction ( τ ～ 100 s). The so‐generated materials will be useful as a basis for self‐healing polymers, as dynamics plays a major role in such polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Self‐Assembly of Decoupled Borazines on Metal Surfaces: The Role of the Peripheral Groups

Two borazine derivatives have been synthesised to investigate their self‐assembly behaviour on Au(111) and Cu(111) surfaces by scanning tunnelling microscopy (STM) and theoretical simulations. Both borazines form extended 2D networks upon adsorption on both substrates at room temperature. Whereas the more compact triphenyl borazine 1 arranges into close‐packed ordered molecular islands with an extremely low density of defects on both substrates, the tris(phenyl‐4‐phenylethynyl) derivative 2 assembles into porous molecular networks due to its longer lateral substituents. For both species, the steric hindrance between the phenyl and mesityl substituents results in an effective decoupling of the central borazine core from the surface. For borazine 1 , this is enough to weaken the molecule–substrate interaction, so that the assemblies are only driven by attractive van der Waals intermolecular forces. For the longer and more flexible borazine 2 , a stronger molecule–substrate interaction becomes possible through its peripheral substituents on the more reactive copper surface.     

Octadecanuclear Gear Wheels by Self‐Assembly of Self‐Assembled “Double Saddle”‐Type Coordination Entities: Molecular “Rangoli”

A series of self‐assembled “double saddle”‐type trinuclear complexes of [Pd₃L′₃ L ₂] formulation have been synthesized by complexation of a series of cis‐protected palladium(II) components with a slightly divergent “E‐shaped” non‐chelating tridentate ligand, 1,1′‐(pyridine‐3,5‐diyl)bis(3‐(pyridin‐3‐yl)urea ( L ). The cis‐protecting agents L′ employed in the study are ethylenediamine (en), tetramethylethylenediamine (tmeda), 2,2′‐bipyridine (bpy), and 1,10‐phenanthroline (phen), for 1 , 2 , 3 , and 4 , respectively. The crystal structures of [Pd₃(tmeda)₃( L )₂](NO₃)₆ ( 2 ), [Pd₃(bpy)₃( L )₂](NO₃)₆ ( 3 ), and [Pd₃(phen)₃( L )₂](NO₃)₆ ( 4 ) unequivocally support the new architecture. Two of the “double saddle”‐type complexes ( 3 and 4 ) are suitably crafted with π surfaces at the strategically located cis‐protecting sites to facilitate intermolecular π–π interactions in the solid state. As a consequence, six units of the 3 (or 4 ) are assembled, by means of six‐pairs of π–π stacking interactions, in a circular geometry to form an octadecanuclear molecular ring of [(Pd₃L′₃ L ₂)₆] composition. The overall arrangement of the rings in the crystal packing is equated with the traditional Indian art form rangoli.     

“Precipitation on Nanoparticles”: Attractive Intermolecular Interactions Stabilize Specific Ligand Ratios on the Surfaces of Nanoparticles

Confining organic molecules to the surfaces of inorganic nanoparticles can induce intermolecular interactions between them, which can affect the composition of the mixed self‐assembled monolayers obtained by co‐adsorption from solution of two different molecules. Two thiolated ligands (a dialkylviologen and a zwitterionic sulfobetaine) that can interact with each other electrostatically were coadsorbed onto gold nanoparticles. The nanoparticles favor a narrow range of ratios of these two molecules that is largely independent of the molar ratio in solution. Changing the solution molar ratio of the two ligands by a factor of 5 000 affects the on‐nanoparticle ratio of these ligands by only threefold. This behavior is reminiscent of the formation of insoluble inorganic salts (such as AgCl), which similarly compensate positive and negative charges upon crystallizing. Our results pave the way towards developing well‐defined hybrid organic–inorganic nanostructures.