Stereocontrolled 1,3-phosphatyloxy and 1,3-halogen migration relay toward highly functionalized 1,3-dienes

A double migratory cascade reaction of α-halogen-substituted propargylic phosphates to produce highly functionalized 1,3-dienes has been developed. This transformation features 1,3-phosphatyloxy group migration followed by 1,3-shifts of bromine and chlorine as well as the unprecedented 1,3-migration of iodine. The reaction is stereodivergent: (Z)-1,3-dienes are formed in the presence of a copper catalyst, whereas gold-catalyzed reactions exhibit inverted stereoselectivity, producing the corresponding E products.     

Optisch aktives 1,3-Diferrocenyl-1,3-diphenyl-allen

The title compound 2 was prepared by thermal dehydration of 1,3-diferrocenyl-1,3-diphenyl-propenol (24) with 70% yield.24 was accessible from 1,3-diferrocenyl-propanedione-1,3 (25) in two steps with 10% overall yield: Treatment of25 with phenyllithium gave 1,3-diferrocenyl-3-phenyl-propenone (8) which after repeated reaction with phenyllithium afforded24.Partial optical resolution of2 was achieved by chromatography on triacetyl cellulose in ethanol, whereby both (+)- and (–)-2 were obtained with different enantiomeric purities as could be deduced from the CD-spectra with -values of +0.18 and –1.64, resp., at 480 nm.Attempts to prepare 1,3-diferrocenyl-allene and 1,3-diferrocenyl-1-phenyl-allene failed. In this context several 1,3-diferrocenyl-propenols,-propenones,-propenes,-propanones,-propanes and-butadienes were obtained.

62. Mitt.:M. Benedikt undK. Schlögl, Mh. Chem.109, 805 (1978).     

Skeletal isomerism within 1,3-disilabicyclo[1.1.0]butane and 2,3-disilabuta-1,3-diene derivatives

A bis-adamantane-spiro-fused 1,3-bis(triisopropylsilyl)-1,3-disilabicyclo[1.1.0]butane equilibrates with the corresponding 2,3-bis(triisopropylsilyl)-1,3-disilabuta-1,3-diene with a ratio of 1:19. The 1,3-disilabuta-1,3-diene was fully characterized by a combination of multinuclear NMR and UV-VIS spectroscopies, elemental analysis, and single-crystal X-ray diffraction analysis.     

1-Chloro-1,3-dimethyl-1,3-diorganyl-3-(trimethylsilylamino)disiloxanes

Russian Chemical Bulletin - The main products of the reaction of 1,3-dichloro-1,3-dimethyl-1,3-diorganyldisiloxanes with hexamethyldisilazane (molar ratio 1 : 1, 20 °C) are the earlier unknown...     

Cationic copolymerization of 2-vinyl-1,3-dioxane with styrene and 1,3-dioxolane

Copolymerization of 2-vinyl-1,3-dioxane with styrene and 1,3-dioxolane was carried out in methylene chloride at 0°C with triethyloxonium tetrafluoroborate as an initiator. Random copolymers were obtained from both of these monomer pairs, but attempted copolymerization of 2-vinyl-1,3-dioxane with 3,3-bis(chloromethyl)oxetane under similar conditions resulted in the homopolymer of the latter monomer. There were three structural units of 2-vinyl-1,3-dioxane in these copolymers as in its homopolymer: the “ester” unit, which was formed by vinyl addition with hydride shift followed by ring-opening rearrangement, the “vinyl” unit produced by ring-opening reaction, and the unit with a pendant 1,3-dioxane ring formed by simple vinyl addition. The fractions of the ester and vinyl units to the total 2-vinyl-1,3-dioxane units in the copolymer of 2-vinyl-1,3-dioxane with styrene decreased with decreasing 2-vinyl-1,3-dioxane content. On the contrary, the fraction of the vinyl unit in the copolymer of 2-vinyl-1,3-dioxane with 1,3-dioxolane increased slightly with decreasing 2-vinyl-1,3-dioxane content, while that of the ester unit decreased. The reactivities of the propagating species are discussed on the basis of these results.     

1,3-Dimethoxy-1,3-dimethyl-1,3-diphenyl- and 1,3-dimethoxy-1,3-tetraphenyldisiloxanes: synthesis and structure

Russian Chemical Bulletin - 1,3-Dimethoxy- 1,3-dimethyl- 1,3-diphenyl- and 1,3-dimethoxy- 1,3-tetraphenyldisiloxanes were synthesized. Their structures were confirmed by IR and NMR spectroscopy....     

Lewis acid mediated reactions of aldehydes with styrene derivatives: synthesis of 1,3-dihalo-1,3-diarylpropanes and 3-chloro-1,3-diarylpropanols

[reaction: see text] The reactions of aryl aldehydes with styrene derivatives, mediated by various boron Lewis acids, were investigated. 1,3-Dihalo-1,3-diarylpropanes were obtained in high yields with boron trihalides, while 3-chloro-1,3-diarylpropanols were obtained in good to excellent yields with phenylboron dichloride. Reactions involving nonenolizable aliphatic aldehydes, trans-cinnamaldehyde, and beta-substituted styrenes were also investigated for the first time.     

Zur Synthese sulfonierter Derivate von 4-Amino-1,3-dimethylbenzol und 2-Amino-1,3-dimethylbenzol

Syntheses of Sulfonated Derivatives of 4-Amino-1, 3-dimethylbenzene and 2-Amino-1, 3-dimethylbenzene Direct sulfonation of 4-amino-1, 3-dimethylbenzene (1) and sulfonation of 4-nitro-1,3-dimethylbenzene ( 4 ) to 4-nitro-1,3-dimethylbenzene-6-sulfonic acid ( 3 ) followed by reduction yield 4-amino-1,3-dimethylbenzene-6-sulfonic acid ( 2 ). The isomeric 5-sulfonic acid ( 5 ) however is prepared solely by baking the acid sulfate salt of 1 . Reaction of sulfur dioxide with the diazonium chloride derived from 2-amino-4-nitro-1,3-dimethylbenzene ( 7 ) leads to 4-nitro-1,3-dimethylbenzene-2-sulfonyl chloride ( 8 ), which is successively hydrolyzed to 4-nitro-1,3-dimethylbenzene-2-sulfonic acid ( 9 ) and reduced to 4-amino-1, 3-dimethylbenzene-2-sulfonic acid ( 6 ). Treatment of 4-amino-6-bromo-1,3-dimethylbenzene ( 12 ) and 4-amino-6-chloro-1, 3-dimethylbenzene ( 13 ), the former obtained by reduction of 4-chloro-6-nitro-1,3-dimethyl-benzene ( 10 ) and the latter from 4-chloro-6-nitro-1, 3-dimethylbenzene ( 11 ), with oleum yield 4-amino-6-bromo-1,3-dimethylbenzene-2-sulfonic acid ( 14 ) and 4-amino-6-chloro-1,3-dimethylbenzene-2-sulfonic acid ( 15 ) respectively; subsequent carbon-halogen hydrogenolyses of 14 and 15 lead also to 6 (Scheme 1). Baking the acid sulfate salt of 2-amino-1, 3-dimethylbenzene ( 17 ) gives 2-amino-1, 3-dimethylbenzene-5-sulfonic acid ( 16 ), whereas the isomeric 4-sulfonic acid ( 18 ) can be prepared by either of the following three possible pathways: Sulfonation of 2-nitro-1,3-dimethylbenzene ( 20 ) to 2-nitro-1,3-dimethylbenzene-4-sulfonic acid ( 21 ) followed by reduction or sulfonation of 2-acetylamino-1,3-dimethylbenzene ( 19 ) to 2-acetylamino-1,3-dimethylbenzene-4-sulfonic acid ( 22 ) with subsequent hydrolysis or direct sulfonation of 17 . Further sulfonation of 18 yields 2-amino 1,3-dimethylbenzene-4,6-disulfonic acid ( 23 ), the structure of which is independently confirmed by reduction of unequivocally prepared 2-nitro- 1,:3-dimethylbenzene-4,6-disulfonic acid ( 24 )(Scheme 2).     

A 1,3-dihydro-1,3-azaborine debuts

We present the first synthesis and characterization of a 1,3-dihydro-1,3-azaborine, a long-sought BN isostere of benzene. 1,3-Dihydro-1,3-azaborine is a stable structural motif with considerable aromatic character as evidenced by structural analysis and its reaction chemistry. Single crystal X-ray analysis indicates bonding consistent with significant electron delocalization. 1,3-Dihydro-1,3-azaborines also undergo nucleophilic substitutions at boron and electrophilic aromatic substitution reactions. In view of the versatility and impact of aromatic compounds in the biomedical field and in materials science, the present study further expands the available chemical space of arenes via BN/CC isosterism.     

Diastereomer-differentiating hydrolysis of 1,3-diol-acetonides: a simplified procedure for the separation of syn- and anti-1,3-diols

[reaction: see text] A new method to facilitate the separation of diastereomeric syn- and anti-1,3-diols is described. The method relies on the different hydrolysis rates of the corresponding diastereomeric acetonides. Treatment of a dichloromethane solution of syn- and anti-1,3-diol-acetonide with a catalytic amount of diluted aqueous hydrochloric acid leads to the selective cleavage of the anti diastereomer. The resulting anti-1,3-diol can be easily separated from the unchanged syn-1,3-diol-acetonide.     

Cationic polymerizations of substituted 2-methylene-1,3-dioxocyclic acetals, 2-methylene-1,3-dithiolane and copolymerization of 2-methylene-1,3-dithiolane with 4-(t-butyl)-2-methylene-1,3-dioxolane1

Carbon black-supported sulfuric acid or BF₃·Et₂O-initiated polymerizations of 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (1), 2-methylene-4-phenyl-1,3-dioxolane (2), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (3) were performed. 1,2-Vinyl addition homopolymers of 1–3 were produced using carbon black-supported H₂SO₄ initiation at temperatures from 0°C to 60°C whereas both ring-opened and 1,2-vinyl structural units were present in the polymers using BF₃·Et₂O as an initiator. Cationic polymerizations of 2-methylene-1,3-dithiolane (4) and copolymerization of 4 with 2-methylene-4-(t-butyl)-1,3-dioxolane (5) were initiated with either carbon black-sulfuric acid or BF₃·Et₂O. Insoluble 1,2-vinyl addition homopolymers of 4 were obtained upon initiation with the supported acid or BF₃·Et₂O. A soluble copolymer of 2-methylene-1,3-dithiolane (4) and 4-(t-butyl)-2-methylene-1,3-dioxolane (5) was obtained upon BF₃·Et₂O initiation. This copolymer is composed of three structural units: a ring-opened dithioester unit, a 1,2-vinyl-polymerized 1,3-dithiolane unit, and a 1,2-vinyl polymerized 4-(t-butyl)-1,3-dioxolane unit. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2823–2840, 1999     

1,3-Heterocumulene-to-alkyne

Transition structures and energy barriers of the concerted prototypical cycloaddition reaction of 1,3-heterocumulenes (S=C=S, S=C=NR, RN=C=NR, and heteroanalogs) to acetylene resulting in nucleophilic carbenes were calculated by G2(MP2) and CBS-Q ab initio quantum chemical and by density functional theory (DFT) methods. According to the calculations the activation energies (activation enthalpies) of the homoheteroatomic cumulenes decrease in the order O > S > Se and NH > PH and the reaction energies in the order O > S approximately Se and PH > NH. The reaction of carbon disulfide and acetylene has a lower reaction barrier than that of carbodiimide and acetylene although the first reaction is less exothermic than the second one. The stronger cyclic stabilization of the 1, 3-dithiol-2-ylidene in the transition state is discussed in terms of deformation and stabilization energies and of bond indices. The known reactions of carbon disulfide with ring-strained cycloheptynes were examined by DFT and by DFT:PM3 two-layered hybrid ONIOM methods. In agreement with qualitative experimental findings the activation energy increases and the reaction energy decreases in the sequence S, SO(2), and SiMe(2) if CH(2) in the 5-position of 3,3,7, 7-tetramethyl-1-cycloheptyne is replaced by a heteroatom or heteroatomic group, respectively. The results of these calculations were corroborated by experimental studies with carbon diselenide and isothiocyanates as 1,3-heterocumulenes. The cycloaddition of carbon diselenide to cyclooctyne proceeded faster than with carbon disulfide, the main product being the 1,3-diselenol-2-selone. Under more drastic conditions it was possible to add methyl and phenyl isothiocyanate, respectively, to 3,3,6, 6-tetramethyl-1-thia-4-cycloheptyne. The products are 1:3 adducts (cycloalkyne:isothiocyanate) whose formation is explained by a trapping reaction of the first formed 1,3-thiazol-2-ylidenes.     

Highly diastereoselective 1,3-dipolar cycloaddition reactions of trans-2-methylene-1,3-dithiolane 1,3-dioxide with 3-oxidopyridinium and 3-oxidopyrylium betaines: a route to the tropane skeleton

The C2-symmetric vinyl sulfoxide, trans-2-methylene-1,3-dithiolane 1,3-dioxide, was found to react with a range of 3-oxidopyridinium betaines (bearing different substituents on nitrogen) in high yield and with total diastereoselectivity. A 2.3:1 mixture of regioisomers was formed with all of the 3-oxidopyridinium betaines but the ratio was found to change over prolonged periods of time due to reversibility of the minor regioisomer. 3-Oxidopyridinium betaines bearing methyl substituents at either the 2- or 6-position were also tested in the cycloaddition process. Improved regioselectivity (8:1) and again high diastereoselectivity were observed with the betaine having an additional substituent at the 2-position, but with betaines having a substituent in the 6-position although high regioselectivity was observed (9.9:1), the major isomer was formed with low diastereoselectivity (5.5:4.4). The origin of the regio- and diastereo-selectivity with all the betaines is discussed. Finally, the C2-symmetric vinyl sulfoxide, trans-2-methylene-1,3-dithiolane 1,3-dioxide was reacted with an oxidopyrylium betaine in moderate yield. Good regioselectivity and moderate diastereoselectivity were observed.     

Cycloaddition reactions of 1,3-diazabuta-1,3-dienes with alkynyl ketenes

The cycloaddition reactions of ‘all-carbon’ 1,3-diazabuta-1,3-dienes with a few conjugated and unconjugated alkynyl ketenes are described. The reactions provide some interesting azetidinones and dihydropyrimidinones bearing an alkynyl moiety. The regiochemistry of cycloadduct is related with the degree of conjugation of the alkynyl ketene. Moreover, two alternative approaches to ‘all-carbon’ 1,3-diazabuta-1,3-dienes are reported.     

Synthesis of (1,3-adamantylene)bis-1,3-dicarbonyl compounds

Reactions of 1,3-dihydroxyadamantane with 1,3-dicarbonyl compounds in the presence of 5 mol % of In(OTf)₃ afforded a series of (1,3-adamantylene)bis-1,3-dicarbonyl compounds in yields of 25–83%.     

N-(1,3-Thiazol-5(4H)-yliden)amine aus 1,3-dipolaren Cycloadditionen von Aziden mit 1,3-Thiazol-5(4H)-thionen

N-(1,3-Thiazol-5(4H)-ylidene)amines via 1,3-Dipolar Cycloaddition of Azides and 1,3-Thiazol-5(4H)-thiones Organic azides 5 and 4,4-dimethyl-2-phenyl-1,3-thiazol-5(4H)-thione ( 2 ) in toluene at 90° react to give the corresponding N-(1,3-thiazol-5(4H)-ylidene)amines (= 1,3-thiazol-5(4H)-imines) 6 in good yield (Table). A reaction mechanism for the formation of these scarcely investigated thiazole derivatives is formulated in Scheme 3: 1,3-Dipolar azide cycloaddition onto the C?S group of 2 leads to the 1:1 adduct C . Successive elimination of N₂ and S yields 6 , probably via an intermediate thiaziridine E .     

Photocyclization of 2-chloro-substituted 1,3-diarylpropan-1,3-diones to flavones

The photochemical behavior of 2-halo-substituted 1,3-diarylpropan-1,3-dione strongly depends on the nature of the halogen atom bonded and the presence of electron-donor groups on the phenyl ring. In the case of 2-chloro-1,3-diphenylpropan-1,3-dione and 1-(3,5-dimethoxyphenyl)-3-phenylpropan-1,3-dione, cyclization to flavones was the sole reaction pathway, whereas in the case of 2-chloro-1,3-di(4-methoxyphenyl)propan-1,3-dione, only products derived from alpha-cleavage were observed. 2-Fluoro derivatives of 1,3-diarylpropan-1,3-diones were photostable; on the other hand, 2-chloro-2-fluoro derivates resulted in 3-fluoroflavones.     

The methoxycarbonylcarbene insertion into 1,3-dithiolane and 1,3-oxathiolane rings

Treatment of substituted 1,3-dithiolanes and 1,3-oxathiolanes with methyl diazoacetate in the presence of Rh₂(OAc)₄ effects ring expansion to the corresponding substituted 1,4-dithiane-2-carboxylates and 1,4-oxathiane-3-carboxylates. The sulfur ylides initially generated in these reactions undergo Stevens rearrangement in competition with both [2,3]-C-C-sigmatropic rearrangement and intramolecular fragmentation. In the case of 2-styryl-substituted 1,3-oxathiolane and 1,3-dithiolane, ring expansion on one-, three- and four-carbons subsequently takes place.     

1,3-Diacetylferrocene

A method is described for the preparation of 1,3-diacetylferrocene, in which ethylferrocene is first acetylated with acetyl chloride in the presence of AlCl₃ in methylene chloride to a mixture of isomeric acetylethylferrocenes. This mixture is then subjected to thin-layer chromatography, a mixture of the 1,1′- and 1,3-derivatives free from the 1,2-isomer being obtained. After oxidation of this mixture with MnO₂ to a mixture of 1,1′- and 1,3-diacetylferrocenes, the isomers are separated by preparative thin-layer chromatography.     

Highly chemoselective 2,4,5-triaryl-1,3-dioxolane formation from intermolecular 1,3-dipolar addition of carbonyl ylide with aryl aldehydes

[reaction: see text] Rhodium(II) acetate catalyzed 1,3-dipolar cycloaddition of methyl phenyldiazoacetate with a mixture of electron-rich and electron-deficient aryl aldehydes gave 1,3-dioxolanes in high yield with excellent chemoselectivity.