Palladium(II)-N-heterocyclic carbene-catalyzed direct C2- or C5-arylation of thiazoles with aryl bromides

Herein we report, a series of new benzimidazolium chlorides as N-heterocyclic carbene (NHC) ligand and their corresponding palladium(II)-NHC complexes with the general formula [PdCl₂(NHC)₂] were synthesized. All new compounds were characterized by ¹H NMR, ¹³C NMR, IR spectroscopy and elemental analysis techniques. The catalytic activity of palladium(II)-NHC complexes was investigated in the direct C2- or C5-arylation of thiazoles with aryl bromides in presence of palladium(II)-NHC at 150?°C for 1?h. These complexes exhibited the good catalytic performance for the direct arylation of thiazoles. The arylation of thiazoles regioselectively produced C2- or C5-arylated thiazoles in moderate to high yields.     

Allylic alkylation and amination using mixed (NHC)(phosphine) palladium complexes under biphasic conditions

A dramatic improvement of the catalytic activity was observed when a phosphine was added in allylic alkylation reactions catalyzed by (NHC)Pd(η³-C₃H₅)Cl complexes. Consequently, several palladium complexes, generated in situ from different NHC-silver complexes, [Pd(η³-C₃H₅)Cl]₂ and PPh₃, were tested in this reaction to evaluate their potential. High reaction rates and conversions could be obtained with this catalytic system in the alkylation of allylic acetates with dimethylmalonate, particularly under biphasic conditions using water/dichloromethane and KOH 1 M as the base. These conditions are experimentally more convenient and gave higher reaction rates than the classical anhydrous conditions (NaH/THF). In this system, the phosphine is essential since no conversion was obtained when it is not present. The steric hindrance of the carbene ligand has a great influence on the activity and the stability of the catalytic system. The best NHC ligands for this reaction are either 1-mesityl-3-methyl-imidazol-2-ylidene or 1-(2,6-diisopropylphenyl)-3-methyl-imidazol-2-ylidene which are less bulky among the NHC tested. These two ligands led in 5 min to a complete conversion at 20 °C. The Pd-catalyzed allylic amination reaction using (E)-1,3-diphenylprop-3-en-yl acetate and benzylamine was also tested with (NHC)(PPh₃)Pd complexes and under the biphasic conditions. This reaction was found to be slower than the alkylation with dimethylmalonate but a complete conversion could be reached in 6 h at 20 °C using K₂CO₃ 1 M as the base. NMR experiments indicated that mixed (NHC)(PPh₃)Pd complexes are formed in situ but their structure could not be established exactly.     

Synthesis of Pd complexes bearing an enantiomerically resolved seven-membered N-heterocyclic carbene ligand and initial studies of their use in asymmetric Wacker-type oxidative cyclization reactions

The development of enantiomerically resolved, axially-chiral seven-membered N-heterocyclic carbene (⁷NHC) ligands for palladium is described. These ⁷NHC ligands are derived from enatiomerically pure 2,2′-diamino-6,6′-dimethylbiphenyl, which is transformed via a synthetic sequence consisting of ortho-arylation, N-alkylation, and cyclization to afford seven-membered-ring amidinium salts. Synthesis of the seven-membered amidinium salts benefits from microwave irradiation, and in-situ metalation of the amidinium salts yields ⁷NHC-Pd^II complexes. The chiral ⁷NHC-Pd complexes were examined as chiral catalysts under aerobic conditions in two intramolecular oxidative amination reactions of alkenes. In one case, enantioselectivities up to 63% ee were obtained, while the other substrate underwent cyclization to afford essentially racemic products. The catalytic data compare favorably to results obtained with a Pd^II catalyst bearing a chiral five-membered-ring NHC ligand and, thereby, highlight the potential significance of this new class of chiral NHC ligands.     

Polycondensation of haloarylketones catalyzed by palladium compounds bearing N-heterocyclic carbene (NHC) ligands

Palladium-catalyzed α-arylation of ketones, which can efficiently give coupling products by using appropriate ligands and bases, could be applied to a polycondensation reaction. Stable N-heterocyclic carbenes (NHC) were used as favorable ligands coordinating the Pd catalysts, which were generated in situ from commercially available palladium compounds such as Pd(OAc)₂ and Pd₂(dba)₃ as suitable catalyst precursors in this polymerization. Using small amounts of binary catalysts, poly(aryl alkyl ketone)s were afforded in high yields from haloarylketones in the presence of a base. A primarily prepared palladium catalyst having an NHC ligand, [Pd(OAc)₂(NHC)], also efficiently catalyzed the polycondensation, whereas a palladium compound bearing two carbene ligands, [PdX₂(NHC)₂], did not.     

Palladium, rhodium and platinum complexes of ortho-xylyl-linked bis-N-heterocyclic carbenes: Synthesis, structure and catalytic activity

New Pd(II), Pt(II) and Rh(I) N-heterocyclic carbene (NHC) complexes containing two NHC units linked by an ortho-xylyl group are described and structurally and spectroscopically characterised. The Pt(II) complexes represent the first examples of Pt-bis(NHC) complexes where the NHC units are linked by an ortho-xylyl group. Functionalisation of the bis(NHC) ligands with heptyl groups has been used as a means of enhancing the solubility of the complexes, in order to facilitate spectroscopic characterisation and catalytic studies. The catalytic activity of the palladium(II) complexes in Heck and Suzuki cross-coupling reactions has been examined to investigate any effects of the diverse structural changes, though these appear to be insignificant.     

N‐heterocyclic carbene complexes of Rh(I) and electronic effects on catalysts for 1,2‐addition of phenylboronic acid to aldehydes

1,3‐Diarylsubstituted imidazolinium salts, (NHC‐H)Cl, 3, containing hydrogen or alkyl groups at the 4,5‐positions of the imidazolidine ring, served as precursors to rhodium(I) complexes [RhCl(NHC)COD], 4, which were converted into cis‐[RhCl(NHC)(CO)₂] complexes, 5. All compounds prepared were characterized by elemental analyses, ¹H NMR and ¹³C NMR. The relative σ‐donor/π‐acceptor strength of the NHC ligands was determined by means of IR spectroscopy of 5. The ability of NHCs in 4 to enchance activity was explored in the 1,2‐addition of phenylboronic acid to aldehydes. A good correlation was observed between catalytic activity and the electron‐donating power of the NHC ligands. Copyright © 2010 John Wiley & Sons, Ltd.     

Azetidines as ligands in the Pd(II) complexes series

The preparation of palladium (II) complexes having sterically congested azetidines as ligands is described. Diastereomerically pure α-alkylamino and α-alkylimino azetidines react with Na₂PdCl₄ to afford the corresponding bidendate Pd(II) complexes, whereas 2-cyano azetidines can be used to access bidendate Pd(II) complexes containing an amino-imidate moiety. Preliminary study of the catalytic activity of these new complexes in the Suzuki cross-coupling reaction is presented.     

Sterically and Electronically Flexible Pyridylidene Amine Dinitrogen Ligands at Palladium: Hemilabile cis/trans Coordination and Application in Dehydrogenation Catalysis

Ligand design is crucial for the development of new catalysts and materials with new properties. Herein, the synthesis and unique hemilabile coordination properties of new bis-pyridylidene amine (bis-PYE) ligands to palladium, and preliminary catalytic activity of these complexes in formic acid dehydrogenation are described. The synthetic pathway to form cationic complexes [Pd(bis-PYE)Cl(L)]X with a cis-coordinated N,N-bidentate bis-PYE ligand is flexible and provides access to a diversity of Pd^II complexes with different ancillary ligands (L=pyridine, DMAP, PPh₃, Cl, P(OMe)₃). The ¹H NMR chemical shift of the trans-positioned PYE N−CH₃ unit is identified as a convenient and diagnostic handle to probe the donor properties of these ancillary ligands and demonstrates the electronic flexibility of the PYE ligand sites. In the presence of a base, the originally cis-coordinated bis-PYE ligand adopts a N,N,N-tridentate coordination mode with the two PYE units in mutual trans position. This cis–trans isomerization is reverted in presence of an acid, demonstrating a unique structural and steric flexibility of the bis-PYE ligand at palladium in addition to its electronic adaptability. The palladium complexes are active in formic acid dehydrogenation to H₂ and CO₂. The catalytic performance is directly dependent on the ligand bonding mode, the nature of the ancillary ligand, the counteranion, and additives. The most active system features a bidentate bis-PYE ligand, PPh₃ as ancillary ligand and accomplishes turnover frequencies up to 525 h⁻¹ in the first hour and turnover numbers of nearly 1000, which is the highest activity reported for palladium-based catalysts to date.     

Mechanism of the formation of palladium complexes serving as catalysts in hydrogenation reactions : II. Reactivity of palladium phosphine halides towards molecular hydrogen

[(PPh₃)₃(PPh₂)₂Pd₃Cl] Cl, benzene and aniline hydrochloride were isolated as products of the reactions of (PPh₃)₂PdCl₂]₂ or [(PPh₃)PdCl₂]₂ with H₂ in organic amines (Am). Similar products were obtained when (Ph₃P)₂Pd(Ph)Br was treated with H2₃ Both in amines and aromatic solvents. The reaction between H₂ and [(PBu₃)PdCl₂]₂ resulted in the formation of [(PBu₃(PBu_2)PdCl2 ·. 2 Am The kinetic data for H₂ absorption by solutions of palladium(II) complexes are consistent with the heterolytic mechanism of cleavage fo hte HH bond in the coordination sphere of palladium(II); the function of the H⁺ acceptor being performed by the bases (e.g. Am or Ph). The reaction between the palladium complexes and H₂ is autocatalytic. Reduction of the initial Pd^II complexes leads to lower oxidation state palladium complexes, which catalyse the reduction of Pd^II complexes. In the coordination sphere of the lower oxidation state palladium complexes, the oxidative addition of PR₃ to Pd takes place with formation of compounds containing a Pd-R bond. It is the reaction between these complexes and H₂ that yields palladium compounds with PR₂ ligands.     

Influence of the reaction parameters on the Pd—HCl catalysed synthesis of phenylacetic acid derivatives via reduction of mandelic acid derivatives with carbon monoxide

The catalytic system Pd/C—HCl is highly active in the reduction of mandelic acid derivatives to phenylacetic acid derivatives with carbon monoxide when the aromatic ring is para-substituted with a hydroxy group. Typical reaction conditions are: 70–110 °C, 20–100 atm of carbon monoxide, benzene—ethanol as reaction medium, substrate/Pd=10²–10⁴/1, HCl/substrate=0.3–0.8/1. [Pd] = 10⁻² −10⁻⁴ M. When the catalytic system is used in combination with PPh₃ a slightly higher activity is observed. Comparable results are observed when using a Pd(II) catalyst precursor such as PdX₂, in combination with PPh₃, or PdX₂(PPh₃)₂ (XCl, AcO). When operating at 110 °C, decomposition to metallic palladium occurs. Pd(II) complexes with diphosphine ligands, such as diphenylphosphinemethane, -ethane, -propane or -butane, do not show any catalytic activity and are recovered unchanged. These observations suggest that Pd(0) complexes play a key role in the catalytic cycle. The proposed catalytic cycle proceeds as follows: the chloride ArCHClCOOR, formed in situ upon reaction of ArCHOHCOOR with hydrochloric acid, oxidatively adds to a Pd(0) species with formation of a catalytic intermediate having a Pd—[CH(Ar)COOR] moiety, which inserts a CO molecule, yielding an acyl intermediate of the type Pd—[COCH(Ar)COOR]. The nucleophilic attack of H₂O on the carbon atom of the carbonyl ligand gives back the Pd(0) complex to the catalytic cycle and yields a phenylmalonic acid derivative, which produces the final product, ArCH₂COOR, upon CO₂ evolution. Alternatively, protonolysis of the intermediate having a Pd—[CH(Ar)COOR] moiety yields directly the final product and a Pd(II) species, which is then reduced by CO to Pd(0). Moreover, no catalytic activity is observed when the Pd/C—HCl system is used in combination with any one of the above diphosphine ligands, probably because these ligands block the sites on the catalyst able to promote the catalytic cycle or because they prevent the reduction of Pd(II) to Pd(0). The influence of the following reaction parameters has been studied: concentration of HCl, PPh₃, palladium and substrate, pressure of carbon monoxide, the temperature, reaction time and solvent. The results are compared with those obtained in the carbonylation of aromatic aldehydes to phenylacetic acid derivatives catalyzed by the same system, for which it has been proposed that the catalysis occurs via carbonylation of the aldehyde to a mandelic acid derivative as an intermediate, which is further reduced with CO to yield the final product.     

Synthesis of rhodium N-heterocyclic carbene complexes and their catalytic activity in the hydrosilylation of alkenes in ionic liquid medium

Rhodium complexes bearing N-heterocyclic carbene (NHC) ligands were prepared from bis(η⁴-1,5-cyclooctadiene) dichlorodirhodium and 1-alkyl-3-methylimidazolium-2-carboxylate, and the catalytic properties of rhodium complexes prepared in the hydrosilylation of alkenes in ionic liquid media were investigated. It was found that both the catalytic activity and selectivity of the rhodium complexes bearing NHC ligands were influenced by the attached substituents of the imidazolium cation. Additionally, rhodium complexes bearing NHC ligands in ionic liquid BMimPF₆ could be reused without noticeable loss of catalytic activity and selectivity.     

Piperazine‐ and DABCO‐bridged dinuclear N‐heterocyclic carbene palladium complexes: synthesis,structure and application to Hiyama coupling reaction

Four dinuclear N ‐heterocyclic carbene (NHC) palladium complexes were prepared by reaction of imidazolinium salts, PdCl₂ and bridging ligands (piperazine and DABCO) in one pot or by direct cleavage of the chloro‐bridged dimeric compounds [Pd(μ ‐Cl)(Cl)(NHC)]₂ with bridging ligands. All of the complexes were fully characterized using ¹H NMR, ¹³C NMR, high‐resolution mass and infrared spectroscopies, elemental analysis and single‐crystal X‐ray diffraction. The catalytic activities of the obtained palladium catalysts towards Hiyama coupling of aryl chlorides with phenyltrimethoxysilane were investigated and the results showed that the dinuclear palladium complexes were considerably active for the coupling reaction. Copyright © 2016 John Wiley & Sons, Ltd.     

New palladium (II) complexes containing phosphine‐nitrogen ligands and their use as catalysts in aminocarbonylation reaction

Aminocarbonylation of aryl halides, homogeneously catalysed by palladium, is an efficient method that can be employed for obtaining amides for pharmaceutical and synthetic applications. In this work, palladium (II) complexes containing P^N ligands were studied as catalysts in the aminocarbonylation of iodobenzene in the presence of diethylamine. Two types of systems were used: a palladium (II) complex formed in situ; and one prepared prior to the catalytic reaction. In general, the palladium complexes studied achieved high conversions in an average reaction time of less than 2 hr, which is less than that for the standard system (Pd (II)/PPh₃) used. The pre‐synthesized complexes were faster than their in situ counterparts, as the latter require an induction time to form the Pd/P^N species. The structure and electronic properties of the ligand P^N can influence both the activity and the selectivity of the reaction, stabilizing the acyl‐palladium intermediates formed in a better manner.     

Synthesis,characterization, and catalytic activity of half-sandwich ruthenium complexes with pyridine/phenylene bridged NHC = E (NHC = N-heterocyclic carbene,E = S,Se) ligands

Three half-sandwichruthenium(II) complexes with pyridine/phenylene bridged NHC = E (NHC = N-heterocyclic carbene, E = S, Se) ligands [Ru(p-cymene)L](PF₆)_1–2 ( 1a–1c , L = ligand) were synthesized and characterized. All ruthenium complexes were fully characterized by ¹H and ¹³C NMR spectra, mass spectrometry, and single-crystalX-ray diffraction methods. Moreover, the half-sandwich ruthenium complexes with NHC = E ligands showed highly catalytic activities towards to the tandem dehydrogenation of ammonia borane (AB) and hydrogenation of R–NO₂ to R–NH₂ at 353 K in water.     

Synthesis and structural characterization of palladium(II) 2-(arylazo)naphtholate complexes and their catalytic activity in Suzuki and Sonogashira coupling reactions

Abstract

A family of five palladium(II) 2-(arylazo)naphtholate complexes, [PdCl(PPh₃)(L)] (L?=?O, N-donor of bidentate 2-(arylazo)naphtholate ligands), have been synthesized and characterized by elemental analysis and spectral (FT-IR, UV–Vis, ¹H-NMR and ¹³C-NMR) methods. Further, the catalytic efficiency of all the complexes have been investigated for Suzuki and Sonogashira coupling reaction of various aryl halides.     

Contrasting electronic requirements for CH binding and CH activation in d6 half‐sandwich complexes of rhenium and tungsten

A computational study of the interaction half‐sandwich metal fragments (metal = Re/W, electron count = d⁶), containing linear nitrosyl (NO⁺), carbon monoxide (CO), trifluorophosphine (PF₃), N‐heterocyclic carbene (NHC) ligands with alkanes are conducted using density functional theory employing the hybrid meta‐GGA functional (M06). Electron deficiency on the metal increases with the ligand in the order NHC < CO < PF₃ < NO⁺. Electron‐withdrawing ligands like NO⁺ lead to more stable alkane complexes than NHC, a strong electron donor. Energy decomposition analysis shows that stabilization is due to orbital interaction involving charge transfer from the alkane to the metal. Reactivity and dynamics of the alkane fragment are facilitated by electron donors on the metal. These results match most of the experimental results known for CO and PF₃ complexes. The study suggests activation of alkane in metal complexes to be facile with strong donor ligands like NHC. © 2015 Wiley Periodicals, Inc.     

Cyclometallation,part II. I.r. and1H N.m.r. studies of palladium(II) compounds with substitutedN-(benzylidene)amines

Summary New cyclometallated complexes of palladium containing substitutedN-(benzylidene)amines have been prepared and characterized. Palladium(II) acetate is used to make the acetato-bridged dimers, which undergo metathetical reactions to give the halo-bridged dimers. These when treated with PPh₃ or P(C₆H₁₁)₃ in a 12 molar ratio yield the phosphine monomers. I.r. and¹H n.m.r. studies show that palladium is coordinated through nitrogen, and also reveal the disposition of the halogen and phosphine ligands in the monomeric complexes.     

A series of (NHC)Pd(N˄O)(OAc) complexes: synthesis,characterization and catalytic activities towards desulfinative Sonogashira coupling of arylsulfonyl hydrazides with arylalkynes

A series of well-defined N-heterocyclic carbene palladium (II) complexes with general formula (NHC)Pd(N^˄O)(OAc) were prepared through reaction of Pd (NHC)(OAc)₂(H₂O) with 1-methyl-1H-pyrazole-3-carboxylic acid or 1-methyl-1H-indazole-3-carboxylic acid in the presence of K₂CO₃. These complexes were then used for desulfinative Sonogashira coupling of arylsulfonyl hydrazides with terminal alkynes. With low catalyst loading, all synthesized palladium compounds exhibited moderate to high catalytic activities for the reactions.     

Novel quasi‐scorpionate ligand structures based on a bis‐N‐heterocyclic carbene chelate core: synthesis,complexation and catalysis

A series of novel quasi‐scorpionate CNC donor ligands, MeC(2‐C₅H₄N){CH₂(imidazole‐R)} (R = methyl, n‐butyl, n‐propenyl), in which a chelating bis(NHC) core is supplemented by a hemi‐labile pyridyl donor, were prepared. The coordination chemistry of these ligands was investigated with silver, palladium, rhodium and iridium. The single crystal X‐ray structures of [Rh(NC₂^Me)(COD)]Cl 8a and [Ir(NC₂^Pr)(COD)]Br 9b were determined. The catalytic potential of the rhodium and iridium complexes was assessed in the transfer hydrogenation of ketones; the iridium complexes, which show superior performance, form very effective and stable catalysts. Copyright © 2011 John Wiley & Sons, Ltd.     

Mixed N-heterocycles/N-heterocyclic carbene palladium(II) allyl complexes as precatalysts for direct arylation of azoles with aryl bromides

A series of mixed N-heterocycles/N-heterocyclic carbene palladium(II) allyl complexes with general formula [(NHC)Pd(η³-allyl)]₂(μ₂-N-heterocycles)(BF₄)₂ were prepared in one pot based on anion metathesis of (NHC)Pd(η³-allyl)Cl complexes and then ligand replacement with N-heterocycles [N-heterocycles?=?pyrazine (pyz), 4,4′-bipyridine (bpy) and trans-4,4′-bipyridylethylene (bpe)]. The solid-state structures shown dinuclear structures with two palladium(II) centers holding together by bridged N-heterocycles. Initially investigation of the obtained complexes as precatalysts for direct CH bond arylation of azoles with aryl bromides was carried out.