High carbon yield thermoset resin based on phenolic resin,hyperbranched polyborate,and paraformaldehyde

Hyperbranched polyborate (HBPB) is a new hyperbranched polymer with excellent thermal resistance, which can be used to improve the thermal stability, especially carbon yield, of phenolic resin (PR). In the present paper, thermal properties and curing degrees of the blends of PR and HBPB (PR–HBPB blends) are investigated. It is found that the curing degrees of PR–HBPB blends would be decreased, and the decrease of curing degree can be attributed to the improper ratio of phenol groups of HBPB to hydroxymethyl groups of PR. Paraformaldehyde (PFM) is introduced to remedy the deficiency of hydroxymethyl groups in PR–HBPB blends. The curing degrees of PR–HBPB blends are improved and the carbon yields of the blends of PR, HBPB, and PFM (PR–HBPB–PFM blends) can be up to 75–80% at 800°C in nitrogen. PR–HBPB–PFM blends can be explored as novel precursors for carbon materials with excellent properties, ease of preparation and low cost. Copyright © 2010 John Wiley & Sons, Ltd.     

Hydroxidgruppen an Zeolithen. III. Eigenschaften von Hydroxidgruppen an ZnNaY-, CuNaY-, NiNaY- und CrNaY-Zeolithen

Hydroxide Groups on Zeolites. III. Properties of Hydroxide Groups on ZnNaY, CuNaY, NiNaY, and CrNaY Zeolites The properties of hydroxide groups in dependence on the degree of exchange were studied by IR spectroscopy of ZnNaY, CuNaY, NiNaY, and CrNaY zeolites. Five kinds of hydroxide groups occur on these zeolites: Hydroxid groups limiting the lattice, 3 kinds of structural hydroxide groups, and MeOH⁺ groups. These are the same kinds of hydroxide groups as exist on alkaline earths-Y-zeolites. Some of the OH groups act as acid Brönsted centers. The number of acid Brönsted centers reaches maximum values at degrees of exchange of 40–50% after a pretreatment at 300–400°C. The zeolitic structure is partially destroyed in ZnNaY, CuNaY, and especially CrNaY, at high degree of exchange.     

Optoelectronic,Aggregation, and Redox Properties of Double-Rotor Boron Difluoride Hydrazone Dyes

We develop the chemistry of boron difluoride hydrazone dyes (BODIHYs) bearing two aryl substituents and explore their properties. The low-energy absorption bands (λ_max=427–464 nm) of these dyes depend on the nature of the N-aryl groups appended to the BODIHY framework. Electron-donating and extended π-conjugated groups cause a redshift, whereas electron-withdrawing groups result in a blueshift. The title compounds were weakly photoluminescent in solution and strongly photoluminescent as thin films (λ_PL=525–578 nm) with quantum yields of up to 18 % and lifetimes of 1.1–1.7 ns, consistent with the dominant radiative decay through fluorescence. Addition of water to THF solutions of the BODIHYs studied causes molecular aggregation which restricts intramolecular motion and thereby enhances photoluminescence. The observed photoluminescence of BODIHY thin films is likely facilitated by a similar molecular packing effect. Finally, cyclic voltammetry studies confirmed that BODIHY derivatives bearing para-substituted N-aryl groups could be reversibly oxidized (E_ox1=0.62–1.02 V vs. Fc/Fc⁺) to their radical cation forms. Chemical oxidation studies confirmed that para-substituents at the N-aryl groups are required to circumvent radical decomposition pathways. Our findings provide new opportunities and guiding principles for the design of sought-after multifunctional boron difluoride complexes that are photoluminescent in the solid state.     

Synthesis,Photophysical, and Two‐Photon Absorption Properties of Elongated Phosphane Oxide and Sulfide Derivatives

A series of rod‐shaped and related three‐branched push–pull derivatives containing phosphane oxide or phosphane sulfide (PO or PS)—as an electron‐withdrawing group conjugated to electron‐donating groups, such as amino or ether groups, with a conjugated rod consisting of arylene–vinylene or arylene–ethynylene building blocks—were prepared. These compounds were efficiently synthesized by a Grignard reaction followed by Sonogashira coupling. Their photophysical properties including absorption, emission, time‐resolved fluorescence, and two‐photon absorption (TPA) were investigated with special attention to structure–property relationships. These fluorophores show high fluorescence quantum yields and solvent‐dependent experiments reveal that efficient intramolecular charge transfer occurs upon excitation, thereby leading to highly polar excited states, the polarity of which can be significantly enhanced by playing on the end groups and conjugated linker. Rod‐shaped and related three‐branched systems show similar fluorescence properties in agreement with excitation localization on one of the push–pull branches. By using stronger electron donors or replacing the arylene–ethynylene linkers with an arylene–vinylene one induces significant redshifts of both the low‐energy one‐photon absorption and TPA bands. Interestingly, a major enhancement in TPA responses is observed, whereas OPA intensities are only weakly affected. Similarly, phosphane oxide derivatives show similar OPA responses than the corresponding sulfides but their TPA responses are significantly larger. Finally, the electronic coupling between dipolar branches promoted by common PO or PS acceptor moieties induces either slight enhancement of the TPA responses or broadening of the TPA band in the near infrared (NIR) region. Such behavior markedly contrasts with triphenylamine‐core‐mediated coupling, which gives evidence for the different types of interactions between branches.     

Polymers incorporating backbone thiophene,furan, and alcohol functionalities formed through chemical modifications of alternating olefin–carbon monoxide copolymers

The reaction of the alternating ethylene–carbon monoxide copolymer with Lawesson's reagent resulted in the conversion of 75% of the carbonyl groups to thiophene units. A few thioketone groups were also present in the derived polymer. A polymer with furan units in the backbone was formed upon treatment of the alternating propylene–carbon monoxide copolymer with P₂O₅. Depending on the reaction conditions, up to 90% of the carbonyl groups were converted. Finally, 1,4-polyalcohols were prepared from the alternating propylene-carbon monoxide copolymer by reduction. Hydrogenation using Raney nickel as catalyst resulted in the reduction of 60% of the carbonyl groups, whereas reaction with LiAlH₄ at room temperature caused the reduction of 85% of the carbonyl groups. The glass transition temperature was found to increase monotonically with increasing concentration of hydroxyl groups in the polymer backbone. © 1994 John Wiley & Sons, Inc.     

Structure and Reactivity of Five- and Six-Ring N,N-, N,O-, and O,O-acetals: A lesson in allylic 1, 3-strain (A1, 3 strain)

The X-ray structures of fifteen 1, 3-imidazolidine, 1, 3-oxazolidine, 1, 3-dioxan-4-one, and hydropyrimidine-4(1H)-one derivatives are described (Table 2) and compared with known structures of similar compounds (Figs. 1–20). The differences between structures containing exocyclic N-acyl groups and those lacking this structural element arise from the A^1,3 effect of the amide moieties. Even t-Bu groups are forced into axial positions of six-ring half-chair or into flag-pole positions of six-ring twist-boat conformers by this effect (Figs. 16–20). In the N-acylated five-membered heterocycles, a combination of ring strain and A^{1, 3} strain leads to strong pyramidalizations of the amide N-atoms (Table 1) such that the acyl groups wind up on one side and the other substituents on the opposite side of the rings (Figs. 4–9 and Scheme 3). Thus, the acyl (protecting!) groups strongly contribute to the steric bias between the two faces of the rings. Observed, at first glance surprizing stereoselectivities of reactions of these heterocycles (Schemes 1 and 2) are interpreted (Scheme 3) as an indirect consequence of the amide A^{1, 3} strain effect. The conclusions drawn are considered relvant for a better understanding of the ever increasing role which amide groups play in stereoselective syntheses.     

Scalable Total Syntheses and Structure–Activity Relationships of Haouamines A,B, and Their Derivatives as Stable Formate Salts

Haouamines A, B, and their derivatives were synthesized via Suzuki–Miyaura coupling and three key cyclization reactions as follows: the newly developed palladium(0)-catalyzed arylative cyclization of phenylalanine-derived alkyne–aldehydes with 2-bromoarylboronic acid (an “anti-Wacker”-type cyclization); BF₃ ⋅ OEt₂-promoted Friedel–Crafts-type cyclization of symmetrical electron-rich aromatic rings adjacent to a tertiary allylic alcohol leading to the indeno-tetrahydropyridine skeleton; and (cyanomethyl)trimethylphosphonium iodide-mediated macrocyclization of amino alcohols to afford aza-paracyclophane precursors. The palladium-catalyzed reduction of mono- and di-triflate intermediates in the later stages enabled the alteration of both the position and number of hydroxyl groups on the C-ring. The instability of haouamine B was dramatically improved by salt formation with formic acid. An unambiguous evaluation of the cytotoxicity of the prepared haouamine derivative formates with and without hydroxyl groups at different positions on the C-ring indicated that the catechol structure in haouamine B produced weak cytotoxicity.     

Preparation and properties of some water-soluble,comb-shaped,amphiphilic polymers

Water-soluble comb-shaped polymers were prepared through grafting of poly(ethylene glycol) monomethyl ethers (MPEG) onto acrylic and methacrylic ester copolymers by transesterification reactions. The grafting was alkali-catalyzed, and performed in refluxing toluene solution or in melt at 155°C. The grafting efficiency was found to be on the order of 1 graft/10 monomer units. Epoxy groups in glycidyl methacrylate copolymers were also utilized for grafting. The crude graft copolymers were purified through chromatography and characterized by NMR and IR spectroscopy. Polymers prepared from MPEG 2000 were crystalline with melting points 10–15°C lower than the MPEG used. All polymers were shown to be surface active with CMC on the order of 1.5 g/L, and surface tensions of 38–45 dyn/cm. When used as emulsifiers the graft copolymers containing bulky lipophilic ester groups (2-ethylhexyl t-butyl) gave oil-in-water (o/w) and water-in-oil (w/o) emulsions from xylene/water with higher stability than those containing straight chain ester groups (methyl nbutyl n-docecyl). The most stable emulsions were obtained by dissolving the polymers in the organic phase.     

Simultaneous determination of total homocysteine,cysteine, glutathione,and N‐acetylcysteine in brain homogenates by HPLC

We have developed a simple, fast, accurate, and cheap method for the simultaneous determination of total cysteine, homocysteine, glutathione, and N‐acetylcysteine in brain homogenates based on the reduction of disulfide bonds by tris(2‐carboxyethyl) phosphine, pre‐column derivatization of free thiol groups with 2‐chloro‐1‐methylquinolinium tetrafluoroborate followed by ion‐pair reversed‐phase high‐performance liquid chromatography separation with ultraviolet detection. The separation of thiol derivatives was achieved in 10 min. Linearity was observed in the range of 10–300, 0.7–10, 2–30, and 3–20 μmol/L homogenate with a limit of detection of 3.7, 0.2, 0.8, and 1.2 μmol/L homogenate for cysteine, homocysteine, glutathione, and N‐acetylcysteine, respectively. The precision, calculated as relative standard deviation, was in the range of 1.21–4.77, 1.53–14.35, 0.47–1.92, and 1.61–8.95% for cysteine, homocysteine, glutathione, and N‐acetylcysteine, respectively. The presented method was successfully applied to the selective determination of total amino thiols in pig brain tissue samples.     

Synthesis,Structure, and Optical Studies of Donor–Acceptor‐Type Near‐Infrared (NIR) Aza–Boron‐Dipyrromethene (BODIPY) Dyes

Six donor–acceptor‐type near‐infrared (NIR) aza–boron‐dipyrromethene (BODIPY) dyes and their corresponding aza–dipyrrins were designed and synthesized. The donor moieties at the 1,7‐positions of the aza–BODIPY core were varied from naphthyl to N‐phenylcarbazole to N‐butylcarbazole. The 3,5‐positions were also substituted with phenyl or thienyl groups in the aza–BODIPYs. Photophysical, electrochemical, and computational studies were carried out. The absorption and emission spectra of aza–BODIPYs were significantly redshifted (≈100 nm) relative to the parent tetraphenylaza–BODIPY. Fluorescence studies suggested effective energy transfer (up to 93 %) from donor groups to the aza–BODIPY core in all of the compounds under study. Time‐dependent (TD)‐DFT studies indicated effective electronic interactions between energy donor groups and aza–dipyrrin unit in all the aza–BODIPYs studied. The HOMO–LUMO gap (ΔE) calculated from cyclic voltammetry data was found to be lower for six aza–BODIPYs relative to their corresponding aza–dipyrrins.     

Non-symmetric liquid crystal dimers based on 1,3,4-oxadiazole derivatives: synthesis,photoluminescence and liquid crystal behaviour

A series of non-symmetric liquid crystal compounds consisting of two different semi-rigid anisometric cores, namely 1,3,4-oxidiazole and biphenyl units, and two short terminal groups, have been synthesised in good yield. It has been shown by polarising optical microscopy and differential scanning calorimetry that all these compounds display liquid crystalline behaviour, with nematic and/or smectic A mesophases. The nature of the mesophases is dependent on the electronic properties of the terminal groups. In methylene chloride solution all the compounds displayed a room temperature emission with λ_max at 358–396 nm and quantum yields of 0.29–0.56. The effect of the terminal groups on the mesomorphic and photoluminescent properties is briefly discussed in the context of their electronic characteristics.     

An effective strategy of P,N-containing macrocycle design

An effective strategy of P,N-containing macrocycle design is described, which is based on covalent self-assembly processes in the course of Mannich-type condensations in three-component systems: primary phosphine (or secondary diphosphine)–formaldehyde–diamine with spatially divided functional groups (or primary amine). This approach allowed the authors to obtain various types of macrocyclic phosphines, namely cage cyclophanes with a 1,5-diaza-3,7-diphosphacyclooctane fragment in the basic framework, cyclophanes with linear P,N-containing spacers, P,N-containing corands and the first P,N-containing cryptand with four phosphine centers.     

Metal–Organic Cyclohelicates as Optical Receptors for Glutathione: Syntheses,Structures, and Host–Guest Behaviors

Two trinuclear zinc‐based cyclohelicates, Zn–PDB (PDB=[5‐(dibenzylamino)‐N1′,N3′‐bis(pyridin‐2‐ylmethylene)isophthalohydrazide]) and Zn–PMB (PMB=[5‐(bodipy‐oxy)‐N1′,N3′‐bis(pyridin‐2‐ylmethylene)isophthalohydrazide]) containing dibenzylamino and BODIPY groups, respectively, were generated by incorporating two amide‐containing tridentate chelators into meta‐positions of a substituted phenyl ring. Single‐crystal structure analysis and related spectroscopic characterizations demonstrated the formation of macrocyclic helicals both in the solid state and in solution. The host–guest behavior of the cyclohelical hosts towards γ‐glutamyl‐cysteinyl‐glycine (GSH) and its component amino acids was investigated by spectroscopic titrations. UV/Vis absorption titration and NMR titrations of Zn–PDB and Zn–PMB upon addition of the above‐mentioned guests suggested that the Glu residue of GSH was positioned within the cavity. The COO⁻ groups interacted with metal ions through static interactions. The Cys moiety of GSH interacted with the amide groups sited in host molecules through hydrogen‐bonding interactions to produce measurable spectral changes. Fluorescent titrations of Zn–PMB upon the addition of GSH and ESI‐MS investigations of the titration solutions confirmed the host–guest interaction modes and revealed the possible 1:1 complexation stoichiometry. These results showed that the recognition of a substrate within the cavity of functionalized metal–organic cage‐like receptors could be a useful method to produce supramolecular sensors for biomolecules.     

Synthesis,characterization, and diels–alder extension of cyclopentadiene telechelic polyisobutylene. IV. α,ω-Di(3-cyclopentadienylpropyldimethylsilyl)polyisobutylene

The synthesis and chain extension of polyisobutylene having nonfluxional terminal cyclopentadiene groups is described. The fluxional behavior of silylcyclopentadiene end groups was previously found to prevent Diels–Alder dimerization of the end groups. The incorporation of a propyl moiety between the silicon atom and the cyclopentadiene ring was found to prevent this fluxional isomerization. Polyisobutylene was synthesized having 3-cyclopentadienylpropyldimethylsilyl end groups with a functionality near 2.0. While thermal extension at 80°C resulted in threefold molecular weight increase, coupling with bisdienophiles yielded greater than tenfold molecular weight increases. The retro-Diels–Alder reaction of coupled end groups prevents the attainment of high-molecular-weight polymers at equilibrium.     

Antimicrobial anilinium polymers: The properties of poly(N,N‐dimethylaminophenylene methacrylamide) in solution and as coatings

Antimicrobial polymers have been widely reported to exert strong biocidal effects against bacteria. In contrast with antimicrobial polymers with aliphatic ammonium groups, polymers with anilinium groups have been rarely studied and applied as biocidal materials. In this study, a representative polymer with aniline side functional groups, poly(N,N‐dimethylaminophenylene methacrylamide) (PDMAPMA), was explored as a novel antimicrobial polymer. PDMAPMA was synthesized and its physicochemical properties evaluated. The methyl iodide‐quaternized polymer was tested against the Gram‐positive Staphylococcus aureus, with a minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of 16–32 and 64–128 μg mL^?1, respectively. Against the Gram‐negative Escherichia coli, the MIC and MBC were both 64–128 μg mL^?1. To broaden the range of applications, PDMAPMA was coated on substrates via crosslinking to endow the surface with contact‐kill functionality. The effect of charge density of the coatings on the antimicrobial behavior was then investigated, and stronger biocidal performance was observed for films with higher charge density. This study of the biocidal behavior of PDMAPMA both in solution and as coatings is expected to broaden the application of polymers containing aniline side groups and provide more information on the antimicrobial behavior of such materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1908–1921     

Analysis of the Interaction Between Bacillus coagulans and Bacillus thuringiensis S-layers and Calcium Ions by XRD,Light Microscopy,and FTIR

S-layer is a self-assemble regularly crystalline surface that covers major cell wall component of many bacteria and archaea and exhibits a high metal-binding capacity. We have studied the effect of the calcium ions and type of solid support (glass or mica) on the structure of the S-layers from Bacillus coagulans HN-68 and Bacillus thuringiensis MH14 upon simple methods based on light microscopy and AFM. Furthermore, the Fourier transform infrared spectroscopy (FTIR) study is indicated that the calcium–S-layer interaction occurred mainly through the carboxylate groups of the side chains of aspartic acid (Asp) and glutamic acid (Glu) and nitrogen atoms of Lys, Asn, and histidine (His) amino acids and N–H groups of the peptide backbone. Studied FTIR revealed that inner faces of S-layer are mainly negative, and outer faces of S-layer are mainly positive. Probably, calcium ions with positive charges bound to the carboxyl groups of Glu and Asp. Accordingly, calcium ions are anchored in the space between the inner faces of S-layer with negative charge and the surface of mica with negative charge. This leads to regular arrangement of the S-layer subunits.     

Thermal radical initiator derivatives based on O‐imino‐isourea: Synthesis,polymerization, and characterization

The new thermal radical initiators (TRIs) with linear and cyclic type groups based on derivatives of O‐imino‐isourea have been designed and synthesized. The radical polymerization property of the synthesized TRI derivatives as a radical initiator in n‐butyl acrylate was monitored by differential scanning calorimetry analysis. TRI derivatives with linear type groups, such as 3‐PenDCC, 3‐HexDCC, and 4‐HepDCC, showed peak temperatures (T_peak) of 80–84 °C, whereas those with cyclic type groups, such as C‐PenDCC, C‐HexDCC, and C‐HepDCC, exhibited a wide T_peak distribution in the 74–87 °C range. The polymerization efficiency using new TRIs in n‐butyl acrylate was elaborately identified from the molecular weights and conversion obtained using gel permeation chromatography analysis and NMR spectroscopy. To consider their possible application to automotive clearcoats, the real‐time evolution of the rheological properties of clearcoat resins during the crosslinking process with newly synthesized TRI derivatives was measured, confirming the different crosslinking kinetics of TRI derivatives in real thermal curing process. The results were found to be well correlated with data from the radical polymerization experiments of TRIs. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3593–3600.     

An Exceptionally Close,Non‐Bonded Hydrogen–Hydrogen Contact with Strong Through‐Space Spin–Spin Coupling

Condensation of 1,8,13‐tris(mercaptomethyl)triptycene and tris(bromomethyl)methane yields an in,in‐cyclophane with two inwardly directed methine groups. Based on X‐ray analysis and DFT and MP2 calculations, the hydrogen–hydrogen non‐bonded contact distance is estimated to be 1.50–1.53 Å. Furthermore, the two in‐hydrogen atoms show obvious spin–spin coupling with J=2.0 Hz.     

An Exceptionally Close,Non‐Bonded Hydrogen–Hydrogen Contact with Strong Through‐Space Spin–Spin Coupling

Condensation of 1,8,13‐tris(mercaptomethyl)triptycene and tris(bromomethyl)methane yields an in,in‐cyclophane with two inwardly directed methine groups. Based on X‐ray analysis and DFT and MP2 calculations, the hydrogen–hydrogen non‐bonded contact distance is estimated to be 1.50–1.53 Å. Furthermore, the two in‐hydrogen atoms show obvious spin–spin coupling with J=2.0 Hz.     

Synthesis,Crystal Structure,and Photophysical Properties of (1E,3E,5E)‐1,3,4,6‐Tetraarylhexa‐1,3,5‐trienes: A New Class of Fluorophores Exhibiting Aggregation‐Induced Emission

Double Horner–Wadsworth–Emmons reaction of (E)‐2,3‐diaryl‐1,4‐bis(diethylphosphonyl)but‐2‐ene with (p‐substituted) benzaldehydes gave (1E,3E,5E)‐1,3,4,6‐tetraarylhexa‐1,3,5‐trienes in moderate to good yields. Substitution of electron‐withdrawing or ‐donating groups at the para position of the 1,6‐diphenyl groups induced a slight bathochromic shift of UV spectra measured in CHCl₃ compared with that of the parent 1,3,4,6‐tetraphenylhexa‐1,3,5‐triene. Although fluorescence was not observed with all the trienes in CHCl₃, they markedly emitted visible light in powder forms with quantum yields of 0.15–0.44. Introduction of amino groups at the para position of the 3,4‐diphenyl groups induced a bathochromic shift of emission maxima with good solid‐state quantum yields. Thus, the tetraarylated triene framework is found to serve as a new class of fluorophores that exhibit aggregation‐induced emission.