Preliminary results of the positron annihilation in zeolites: Peak shape and 3γ-decay

In many sorts of zeolites long-living positron components are manifested, connected presumably with Ps-formation in various kinds of free space in the zeolite structure. Literature values demonstrate, however, a broad scasttr of data obtained for assumedly on the same composition of zeolite indicating the possible influence of tehnology, adsorbates, impurities, water content, etc. In the present work spectral changes of the 511 keV annihilation peak and its vicinity are evaluated, applying for the first time a combination of theS and W parameters and the 3-specific left plateau region measured in zeolites. To ensure reproducible experimental conditions, evaluated samples were measured. The data show individual temperature behaviours of the annihilation parameters in the studied temperature range of 90–450 K for each kind of samples. The temperature dependence becomes reproducible after the first heating run. The results are discussed with respect to the evolution of long-living positron and positronium components.     

Three-gamma annihilation of ortho-positronium in NiO/γ-Al2O3 catalysts detected by positron lifetime and coincidence Doppler broadening measurements

The pore structure of NiO/γ-Al₂O₃ catalysts is characterized by positron lifetime and Doppler broadening measurements. A very long lifetime τ₄ of 92 ns is resolved from the positron lifetime spectrum measured for pure Al₂O₃, which could be attributed to the ortho-positronium (o-Ps) lifetime in large pores. It was also found that the fitted lifetime τ₄ and its corresponding intensity I₄ obtained from the lifetime spectra both decrease with narrowing energy window of the stop channel in the fast–fast coincidence lifetime measurement system. This suggests that the ultra long lifetime is primarily due to the self annihilation of o-Ps which emits three gamma-rays. Such 3γ annihilation is further evidenced by measuring the Doppler broadening of annihilation gamma rays in coincidence with the prompt gamma rays (1.28 MeV) emitted from the ²²Na positron source. In NiO/γ-Al₂O₃ catalysts both the lifetime τ₄ and its intensity I₄ decreases with increasing NiO content (from 3 wt% to 40 wt%), which indicates decreasing of the number of 3γ events. The 3γ annihilation parameter analyzed from the coincidence Doppler broadening spectrum shows consistent decrease with increasing NiO content.     

Stability and reproducibility of gel-suspension samples for the liquid scintillation counting of14C using N-lauroyl-L-glutamic-α,γ-dibutylamide

Stability and reproducibility of gel-suspension samples were investigated in order to evaluate the characteristic feature of the gel-suspension method for¹⁴C activity measurement. Commercially available gelling agent, N-lauroyl-L-glutamic-α,γ-dibutylamide, was used for the gelformatio of the samples. No change of the counting rate for the gel-suspension sample was observed for more than 2 years after the sample preparation. Four samples used for checking the reproducibility of the sample preparation method. The same values were obtained for the counting rate of¹⁴C activity within the counting error. No change of the counting rate was observed for the “re-gelated” sample. These results show that the gel-suspension method is appropriate for the¹⁴C activity measurement by the liquid scintillation method and is useful for a long-term preservation of the sample for repeated measurement.     

Effect of the CuAl2O4 and CuAlO2 Phases in Catalytic Wet Air Oxidation of ETBE and TAME using CuO/γ-Al2O3 catalysts

This paper studies Cu/Al₂O₃ catalysts, synthesized in two ways: copper deposit in the synthesis of alumina (sol gel) and incipient impregnation stabilized at 400 °C. The materials were characterized by X-ray diffraction studies, nitrogen physisorption, temperature programmed reduction of H₂, dehydration of isopropanol, scanning electronic microscopy, transmission electronic microscopy, which were evaluated in the liquid phase oxidation reaction of ethyl tert-butyl ether and tert-amyl methyl ether. The formation of CuAl₂O₄ and CuAlO₂ in the samples synthesized by sol gel, led to a modification of the texture, thus resulting in an expansion of the specific area of the materials. CuAl₂O₄ and CuAlO₂ have been identified by DRX from a content of 10 % Copper, the first showed the highest intensity with this technique. In the same way, these species favor the presence of Lewis acid sites; this is reflected in the materials with (Di-isopropyl Ether) DIPE of 96.7 % and 91.1 % for the samples SAlCu5 and SAlCu15 respectively. The catalytic activity of the materials prepared by sol gel is in the function of the number of surface acid sites, the smaller particle size of the Cu and the surface of the contact, in the case of the ETBE meanwhile for TAME the activity was based mainly on the strength of the present acid sites. With impregnated materials, the activity is attributed to the smaller particle size of the Cu and the greater strength of the surface acid sites in the solid. The formation of spinel species inhibits the leaching phenomenon in the reaction milieu.     

Experimental study of the pyrolysis path of CaSO3·1/2H2O

Journal of Thermal Analysis and Calorimetry - Simultaneous DSC-TGA (SDT) and Fourier transform infrared spectrometer (FTIR) and diffuse reflectance in situ Fourier transform spectroscopy (DRIFTs)...     

α-Iodination of enaminones using the modified Johnson's procedure: the use of I2 and Et3N

Facile synthesis of α-iodo enaminones 2 was carried out by the use of iodine and triethylamine in methylene chloride in short time in excellent yields.     

Optimization of the liquid scintillation counting technique for the European interlaboratory comparison on gross α/β activity concentrations in water

A liquid scintillation counting (LSC) measurement method optimization for the gross α/β activity analysis in drinking waters with different chemical and radionuclide composition was performed. The optimized method was suitable to provide gross radioactivity results in drinking waters with the levels of the accuracy and precision similar to those obtained using other radioactivity screening techniques. Robust LSC results contributed to the calculation of gross α/β activity reference values of EC-JRC interlaboratory comparison water samples in 2012. Some of the most common errors in the determination of the gross radioactivity using the LSC are presented.

     

Role of support nature （γ-Al2O3 and SiO2-Al2O3） on the performances of rhenium oxide catalysts in the metathesis of ethylene and 2-pentene

The metathesis of ethylene and 2-pentene was studied as an alternative route for propylene production over Re2O7/γ-Al2O3 and Re2O7/SiO2-Al2O3 catalysts. Both NH3 temperature-programmed desorption (NH3-TPD) and H2 temperature-programmed reduction (H2-TPR) results showed that Re2O7/SiO2-Al2O3 exhibited stronger acidity and weaker metal-support interaction than Re2O7/γ-Al2O3. At 35 60℃, isomerization free metathesis was observed only over Re2O7/γ-Al2O3, suggesting that the formation of metal-carbene metathesis active sites required only weak acidity. Our results suggest that on the Re2O7/SiO2-Al2O3, hydrido-rhenium species ([Re]-H) were formed in addition to the metathesis active sites, resulting in the isomerization of the initial 1-butene product into 2-butenes. A subsequent secondary metathesis reaction between these 2-butenes and the excess ethylene could explain the enhanced yields of propylene observed. The results demonstrate the potential for high yield of propylene from alternative feedstocks.     

Structural Properties of Ni/γ−Al2O3 and Cu/γ−Al2O3 Catalyst and its Application for Hydrogenation of Furfurylidene Acetone

Hydrogenation of furfurylidene acetone has been carried out using Ni/γ−Al₂O₃ and Cu/γ−Al₂O₃ catalyst in the presence of isopropanol in autoclave batch reactor. The hydrogenation using Cu/γ−Al₂O₃ at 120^oC for 6 h gives main formation of 1,5-bis-(furan-2-yl)-pentan-3-one. Reaction at higher temperature at 140^oC for 8 h using Ni/γ−Al₂O₃ leads to 1,5-bis-(furan-2-yl)-penta-1-en-3-one. The different selectivity of both catalysts is explained by physical properties including the surface area and distribution of metal loading.     

Synergetic effect between sulfurized Mo/γ-Al_2O_3 and Ni/γ-Al_2O_3 catalysts in hydrodenitrogenation of quinoline

An evidence for the synergetic effect between the stacked bed of Mo/γ-Al2O3 and Ni/γ-Al2O3 in the hydrodenitrogenation (HDN) reaction of quinoline has been provided in this paper. The synergism factor decreases when the reaction temperature increases (280?340 ?C). The synergetic effect leads to improve the hydrogenation activity for the stacked bed compared with the single Mo/γ-Al2O3 bed, which may be attributed to the generation of hydrogen spillover on the Ni/γ-Al2O3 catalyst.     

Characterization of the complexation of tauro- and glyco-conjugated bile salts with γ-cyclodextrin and 2-hydroxypropyl-γ-cyclodextrin using affinity capillary electrophoresis

The complexation of seven bile salts, present in the small intestine of rat, dog and man, (taurocholate, tauro-β-muricholate, taurodeoxycholate, taurochenodeoxycholate, glycocholate, glycodeoxycholate and glycochenodeoxycholate) with γ-cyclodextrin and the chemically modified 2-hydroxypropyl-γ-cyclodextrin, was studied using affinity capillary electrophoresis (ACE). The cyclodextrins (CDs) were investigated due to their use in drug formulation as excipients for solubilisation of poorly soluble drugs and drug candidates. Using mobility shift ACE, the bile salt cyclodextrin interactions were characterized demonstrating 1:1 binding stoichiometry with stability constants ranging from 2 × 10³ to 8 × 10⁴ M^?1. The binding constants showed a systematic dependence on the number and position of hydroxyl groups on the steroid skeleton and the stability constants were in general higher for complexation with the native cyclodextrin than with the modified cyclodextrin. Based upon the size of the complexation constants, it was suggested that the interaction between the CDs and the bile salts takes place at the C and D ring of the steroid skeleton. The complexation of bile salts with the γ-cyclodextrins may compete with drug-γ-cyclodextrin complex formation and, thus, potentially affect drug absorption and efficacy.     

Adsorption of benzene on the V2O5/γ-Al2O3 catalyst

Adsorption of benzene on the V₂O₅/-Al₂O₃ catalysts was studied in the temperature interval from 443 to 493 K and at partial pressures of the adsorbate ranging from 1 to 400 Pa. The adsorption isotherms were plotted. The isosteric heats and various entropy characteristics of adsorption were determined. Mobility of benzene in the adsorption layer is restricted compared to the model of ideal dimeric gas. The adsorbed amounts of benzene and chlorobenzene are compared.     

Synthesis of α-CF3-substituted carbonyl compounds with relative and absolute stereocontrol using electrophilic CF3-transfer reagents

Evans-type chiral lithium imide enolates undergo diastereoselective α-trifluoromethylation with a hypervalent iodine-CF(3) reagent with up to 91% combined isolated yield and 97:3 dr. The resulting isolated diastereopure products can be further transformed into valuable products without racemization.     

Experimental verification of strong rotational dependence of fluorescence and predissociation yield in the b1Πu(v = 1) level of 14N2

New, rotationally resolved fluorescence-excitation spectra confirm coupled-channel Schro?dinger-equation predictions of strong rotational dependence of the fluorescence and predissociation yields in the b(v = 1) level of (14)N(2).     

Formation of the active centers of mixed palladium/γ-Al2O3 catalysts for oxidative purification of gases and their role in the adsorption and activation of carbon monoxide and oxygen

Physicochemical methods (ESR, ESDO, IR spectroscopy, photoluminescence, XRDA, TPD, TPV, etc.) were used to study the status of supported elements in modified Pd/-Al₂O₃ catalysts. The nature of the active centers of adsorption of O₂ and CO was determined. THe laws of the formation of the catalysts and changes of state of supported elements under the effects of environment and temperature wer identified.D. V. Sokolskii Institute of Organic Catalysis and Electrochemistry, Kazakh Academy of Sciences Alma-Ata. Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vo. 27, No. 6, pp. 646–653, November–December, 1991. Original article submitted September 5, 1991.     

Separation of CO2/CH4 and CH4/N2 mixtures using MOF-5 and Cu3（BTC）2

In this paper we used MOF-5 and Cu3（BTC）2 to separate CO2/CH4 and CI-I4/N2 mixtures under dynamic conditions. Both materials were synthesized and pelletized, thus allowing for a meaningful characterization in view of process scale-up. The materials were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. By performing breakthrough experiments, we found that Cu3（BTC）2 separated CO2/CH4 slightly better than MOF-5. Because the crystal structure of Cu3 （BTC）2 includes unsaturated accessible metal sites formed via dehydration, it predominantly interacted with CO2 molecules and more easily captured them. Conversely, MOF-5 with a suitable pore size separated CH4/N2 more efficiently in our breakthrough test.     

Thermal stability and glass transition behavior of PANI/γ-Al2O3 composites

Polyaniline/γ-Al₂O₃ (PANI/γ-Al₂O₃) composites were synthesized by in-situ polymerization at the presence of HCl as dopant by adding γ-Al₂O₃ nanoparticles into aniline solution. The composites were characterized by FTIR and XRD. The thermogravimetry (TG) and modulated differential scanning calorimetry (MDSC) were used to study the thermal stability and glass transition temperature (T _g) of the composites, respectively. The results of FTIR showed that γ-Al₂O₃ nanoparticles connected with the PANI chains and affected the absorption characteristics of the composite through the interaction between PANI and nano-sized γ-Al₂O₃. And the results of XRD indicated that the peaks intensity of the PANI/γ-Al₂O₃ composite were weaker than that of the pure PANI. From TG and derivative thermogravimetry (DTG) curves, it was found that the pure PANI and the PANI/γ-Al₂O₃ composites were all one step degradation. And the PANI/γ-Al₂O₃ composites were more thermal stable than the pure PANI. The MDSC curves showed that the nano-sized γ-Al₂O₃ heightened the glass transition temperature (T _g) of PANI.     

Effect of La_2O_3/γAl_2O_3 Catalyst on the Activation of CH_4 and CO_2 to C_02 Hydrocarbons under Non-equilibrium Plasma

The oxidative coupling of methane (OCM) to C2 hydrocarbons using carbon dioxide as oxidant is an attractive process from environmental point of view. Only a few research papers reported for it1-3. In general, the yield of C2 hydrocarbons was about 6%. This indicated that the method of catalytic activation was unfavorable to the reaction. It is necessary for us to find a new method in order to activate reaction and improve C2 hydrocarbon yield. Non-equilibrium plasma is a cold plasma in…     

Effects of calcination and reduction temperature on the performance of Co-Pt-ZrO2/γ-A12O3 catalysts for Fischer-Tropsch synthesis

采用浸渍法制备了Co-Pt-ZrO2/γ-Al2O3催化剂,对其进行了BET、XRD和TPR等表征,并在浆态床反应器上考察了焙烧温度和还原温度对催化剂费托合成反应性能的影响.结果表明,焙烧温度过高,容易造成Co物种和载体间的相互作用增强,使部分氧化钻颗粒聚集或烧结,导致催化剂的F-T合成反应活性和C5+烃选择性降低.还原温度较低时,钴物种不能充分还原,CO加氢活性低,甲烷选择性高,重质烃选择性低;还原温度过高,则可能造成活性物种的烧结,反而降低了催化剂的活性和重质烃选择性.在原料气n(H2)/n( CO)=2.0、483 K、2.4 MPa和空速3.6 L/( gcat·h)的条件下,31.08％ Co～0.11％Pt ～ 7.16％ ZrO2/Al2O3催化剂在673 K焙烧.纯H2下653 K还原后,其费托性能最佳;CO转化率为27.0％,C5+的选择性为83.0％.     

Experimental Study and 3D Modeling of the Phase Diagram of the Ag–Sn–Se System

In connection with the contradictoriness of literature data, phase equilibria in the Ag–Sn–Se system were restudied by differential thermal analysis and X-ray powder diffraction analysis. A number of polythermal sections and the isothermal section at room temperature of the phase diagram were constructed, and a projection of the liquidus surface was built. The primary crystallization fields of phases and the types and coordinates of in- and monovariant equilibria were determined. It was demonstrated that, in the system, two ternary compounds, Ag₈SnSe₆ and Ag_xSn_{2 – x}Se₂ (0.84 < x < 1.06), form. The former melts congruently at 1015 K and undergoes a polymorphic transformation at 355 K, and the latter melts with decomposition by a peritectic reaction at 860 K. The formation of the compound Ag₂SnSe₃, which was previously reported in the literature, was not confirmed. Based on the phase diagrams of boundary binary systems and the results of the differential thermal analysis of a limited number of samples of the ternary system, equations were obtained for calculation and 3D modeling of the liquidus and phase-separation surfaces.