Determination of Zn(II) in natural waters by ICP-OES with on-line preconcentration using a simple solid phase extraction system

An on-line zinc preconcentration and determination system implemented with inductively coupled plasma optical emission spectrometry (ICP-OES) was developed. The zinc was precipitated and retained on a minicolumn filled with ethyl vinyl acetate (EVA) at pH 9.0, without using any complexing reagent. The zinc ions were eluted from the minicolumn with 10% (v/v) hydrochloric acid. Experimental conditions including pH and sample loading and eluting variables were evaluated and established.An enrichment factor (EF) of 44 was obtained for Zn²⁺ with a preconcentration time of 120 s. Under the optimal conditions, the value of the limit of detection (3σ) for the preconcentration of 10 mL of sample was 0.08 μg L^{− 1}. The sampling frequency was about 24 h^{− 1}. The precision for six replicate determinations (repeatability conditions) at 50 μg L^{− 1} Zn level was 3.94% relative deviation standard (RSD), calculated from the peak heights obtained. The methodology was successfully applied to the determination of zinc in tap water samples and in a certified VKI reference material QC Metal LL1 DHI (Water & Environment) Denmark.     

Determination of uranium(VI) in natural waters after preconcentration on adsorbent containing m-aminophenol fragments

Sorption and complexing properties of a modified adsorbent based on a maleic anhydride-styrene copolymer towards uranium(VI) are studied and the main quantitative characteristics of the metal ion sorption are determined. An adsorbent containing m-aminophenol fragments is proposed for the selective sorption of uranium(VI) from solutions. The optimal sorption conditions have been found. The recovery of uranium(VI) under the optimal conditions exceeds 95%. A procedure of the sorption photometric determination of uranium(VI) in sea water is developed.     

Molecularly imprinted polymers for on-line preconcentration by solid phase extraction of pirimicarb in water samples

The synthesis and performance of a molecularly imprinted polymers (MIPs) as a selective solid phase extraction sorbent for the preconcentration of the carbamate pirimicarb from water samples is described. The MIP was prepared using pirimicarb as the template, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross-linking monomer, and using chloroform as the solvent. The detection of pirimicarb was carried out by differential pulse voltammetry (DPV) at a hanging mercury drop electrode (HMDE) in 0.1 mol l⁻¹ HCl. Solvents of different polarities were checked for the polymer synthesis, and different experimental variables (sample pH, selection of the eluent used, eluent volume, analyte and eluent flow rates and sample volume) associated with the rebinding/extraction process were optimised. For a 25 ml sample, the process took about 13 min and resulted in a nominal enrichment factor of 50 (eluent MeOH:H₂O:HAc, 7:2:1; 0.5 ml) for pirimicarb. A limit of detection of 4.1 μg l⁻¹ was obtained, and a good reproducibility of the measurements using different MIP microcolumns was found. Furthermore, the MIP selectivity was evaluated by checking several substances with similar and different molecular structures to that of pirimicarb. As an application, pirimicarb was determined in water samples of diverse origin which were spiked at a concentration level of 71.5 μg l⁻¹.     

Determination of Zn(II) in alcohol fuel by flame atomic absorption spectrometry after on-line preconcentration using a solid phase extraction system

The method for the determination of zinc in alcohol fuel by flame atomic absorption spectrometry using a solid phase extraction system containing Moringa oleifera seeds as biosorbent material is described. The multivariate optimization of hydrodynamic variables was performed using a full factorial design (2⁴) including the following factors: sorbent mass, preconcentration time, volume of eluent, sample flow rate, sample pH and eluent concentration. It was verified that the aforementioned factors as well as their conditions were statistically significant at the 95% confidence level. With the optimized conditions, the preconcentration factor and the limit of detection were estimated as 23 and 0.9 μg/L, respectively. The analytical curve was linear from 0 to up to 100 μg/L, with a correlation coefficient of 0.999. The developed method was successfully applied to alcohol fuel, and accuracy was assessed through recovery tests with results ranging from 96 to 100%.     

Determination of alkyl- and alkanolamines in drinking and natural waters by capillary electrophoresis with isotachophoretic on-line preconcentration

A procedure is developed for the determination of several amines in drinking and natural waters by capillary electrophoresis with isotachophoretic on-line preconcentration without sample preparation. A background electrolyte based on acridine as an absorbing ion is proposed for analysis with isotachophoretic on-line preconcentration and indirect photometric detection. The sample was injected in the hydrodynamic mode. The procedure was tested on drinking and natural water samples. The accuracy of data obtained was confirmed by the added–found method. The analytical range was from 0.25 to 5 mg/L. The time of one analysis was 5–6 min.     

Determination of uranium in natural waters after anion-exchange separation

A method is described for the determination of uranium by fluorimetry and spectrophotometry in samples of natural non-saline waters. After acidification with hydrochloric acid, the water sample is filtered and, following the addition of ascorbic acid and potassium thiocyanate, passed through a column of the strongly basic anion-exchange resin Dowex 1-X8 (thiocyanate form). On this exchanger uranium is adsorbed as an anionic thiocyanate complex. After removal of iron and other coadsorbed elements by washing first with a mixture consisting of 50 vol.% tetrahydrofuran, 40 vol.% methyl glycol and 10 vol.% 6 M hydrochloric acid, and then with pure aqueous 6 M hydrochloric acid, the uranium is eluted with 1 M hydrochloric acid. In the eluate, uranium is determined fluorimetrically or by means of the spectrophotometric arsenazo III method. The procedure was used for the routine determination of uranium in water samples collected in Austria.     

Determination of uranium and thorium isotopes in mineral spring waters

Concentrations levels of uranium and thorium isotopes have been analyzed in the m mineral spring waters of a high background region of Brazil: Poços de Caldas and Águas da Prata. The procedure was based on the determination of²³⁸U,²³⁴U,²³²Th,²³⁰Th and²²⁸Th by -spectrometry after separation and purification of the isotopes of interest by using anion-exchange chromatography and preparation of the samples for -measurements by electrodeposition. The concentration varied from <1.1 to 28.4 mBq.l^–1 and from <1.6 to 141 mBq.l^–1 for²³⁸U and²³⁴U, respectively. Thorium isotope measurements varied from <0.2 to 1.8 mBq.l^–1 from <0.3 to 4.9 mBq.l^–1 and from <0.8 to 19.9 mBq.l^–1 for²³²Th,²³⁰Th and²²⁸Th, respectively. Calculations of thorium and uranium isotopic activity ratios were carried out giving values ranging from 1.9 to 7.2, from 1.2 to 3.0 and from 7.7 to 15.3 for²³⁴U/²³⁸U,²³⁰Th/²³²Th and²²⁸Th/²³²Th, respectively. The effective doses due to the intake of²³⁸U and²³⁴U present in these waters are expected to reach values up to 1.4×10^–3 mSv y^–1 and 8.0×10^–3 mSv y^–1, respectively.     

On-line solid phase extraction coupled to ICP-OES for simultaneous preconcentration and determination of some transition elements

An on-line solid phase extraction method coupled to ICP-OES was developed for the simultaneous determination of Ce(III), La(III), Sm(III), Y(III), Yb(III), Dy(III), Hf(IV), Zr(IV) and Th(IV) ions in aqueous samples. The ions forming hydrophobic complexes with 3,5,7,2?,4?-pentahydroxy flavone (morin) and were retained on an octadecyl silica (C₁₈) minicolumn. The adsorbed chelates were subsequently eluted from the column and directly transferred into the plasma with 80% (v/v) propanol:H₂O solution for the simultaneous determination of the metal ions. Different parameters affecting the ICP-OES signal intensities and extraction efficiency including pH of the solution, concentration of the chelating agent, flow rate and type of the eluent, loading rate and ionic strength were evaluated and optimized. The calibration graphs were linear in the range of 0.2–100 μg L^?1 and limit of detections for the extraction and determination of the ions in the aqueous sample (25 mL) were in the range 0.10–0.46 μg L^?1. The enhancement factors of the method for the metal ions obtained were in the range of 23 to 242 (V _Sample?=?25 mL) and the precision expressed as relative standard deviations (RSD %) was below 6.9%. Finally, the method was successfully applied to determine the target analytes in natural water samples.     

Speciation of inorganic arsenic in environmental waters using magnetic solid phase extraction and preconcentration followed by ICP-MS

A new method was developed for the speciation of inorganic arsenic in environmental water by using selective magnetic solid-phase extraction followed by inductively coupled plasma mass spectrometry. It is found that As(V) selectively adsorbed on amino-modified silica-coated magnetic nanoparticles (MNPs) in the pH range from 3 to 8, while As(III) is not be retained. The As(V)-loaded MNPs can be separated easily from the aqueous sample solution by simply applying an external magnetic field. The adsorbed As(V) was quantitatively recovered from the MNPs using using 1 M nitric acid. Total inorganic As was extracted after the permanganate oxidation of As(III) to As(V). Parameters affecting the separation were investigated systematically, and the optimal separation conditions were established. Under the optimal conditions, the limit of detection is 0.21 ng L^?1, and the precision is 6.8% (at 10 ng L^?1, for n?=?7). The method was applied to the speciation of inorganic arsenic in environmental water of tobacco growing area.

Determination of gold in natural waters by neutron activation and γ-spectrometry after preconcentration with tributyl phosphate as solid extractant

A method for the preconcentration of gold in natural waters at the sampling site using tributyl phosphate as a solid extractant [Se(TBP)] was developed as a preliminary step prior to the determination of gold by neutron activation and γ-spectrometry. The SE(TBP) was saturated with gaseous chlorine for extracting all gold species. In batch experiments gold was quantitatively retained on the SE(TBP) in 10 min. After extraction and washing, the SE(TBP) was ashed or back-extracted. Gold was quantitatively eluted with hot, neutral 0.025 M thiourea. The gold content of residues of ashing or eluents after evaporation was determined by neutron activation and γ-spectrometry. The detection limit for the overall procedure was 0.2 ng 1^?1. The efficiency was tested on ‘equilibrated’ solutions prepared from river water and tracer solutions of gold. For comparison, the gold content of natural water samples was determined using preconcentration on activated charcoal.     

Spectrophotometric determination of uranium in natural waters after preconcentration on TBP-plasticized dibenzoylmethane-loaded polyurethane foams

A method is presented for the spectrophotometric determination of uranium in natural waters after a preconcentration step involving percolation of a suitable aliquot of the water sample whose pH is adjusted to 6.0–6.5 through a TBP-plasticized dibenzoylmethane-loaded polyurethane foam bed. Uranium on the foam is eluted with 0.6M HCl solution and then determined spectrophotometrically using arsenazo III as a chromogenic reagent.     

Preconcentration and neutron activation analysis of thorium and uranium in natural waters

Uranium and thorium were analyzed in commercial bottled waters and in fresh waters, such as tap water, by neutron activation analysis. The analysis was applied after a preconcentration step from a batch of 1–3 dm³ water under investigation. The adsorption was performed in the presence of a small amount (about 1 g) of an adsorber derived from the salt of a-hydroxyquinoline and benzilic (diphenylglycolic) acid, adsorbed onto charcoal. The preconcentration method has shown to be rapid and reliable. The overall method was set in order to have an alternative method of comparison with other different methods of analysis. The proposed method may be applied to different fresh water samples. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of lead in natural waters using flow injection with on-line preconcentration and flame AAS detection

A rapid and sensitive method has been developed for the determination of lead in water samples by flame atomic absorption spectrometry using on-line preconcentration on a microcolumn packed with silica gel treated with a mixture of Aliquat 336 and nitroso-R-salt. The lead is retained at pH 5.5. The preconcentrated lead is directly eluted from the column to the nebulizer-burner system using 150 L of 0.1 mol/L hydrochloric acid. The optimum preconcentration conditions are given and the retention efficiency achieved is higher than 80%. The enrichment factor is 37 and 100 for sample volumes of 5 and 30 mL, respectively. The limits of detection are 10.0, 6.0 and 4.0 ng/mL when 5, 10 and 30 mL of water is preconcentrated.     

Determination of zirconium,thorium and scandium with 2,5-dihydroxy-1,4-benzoquinone

Zirconium is quantitatively precipitated by 2,5-dihydroxy-1,4-benzoquinone and is separated from scandium in 1 N hydrochloric acid solution. Thorium is separated at pH 0.5 from uranium(VI), cerium(IV), lanthanum, yttrium and scandium. Scandium is quantitatively precipitated by this reagent in the pH range 1.4–2.0 and at pH 1.5 equivalent amounts of lanthanum do not interfere; small amounts of yttrium cause interference.     

Determination of herbicides by solid phase extraction gas chromatography-mass spectrometry in drinking waters

A solid phase extraction (SPE) method has been optimized for the gas chromatography-mass spectrometry (GC-MS) simultaneous determination of herbicides belonging to the following different families: carbamate (molinate), atrazines (atrazine, propazine, simazine, ametryne, cyanazine, terbutylazine, deethylterbutylazine, deethylatrazine), dinitroaniline (trifluralin, pendimethalin), chloroacetamide (alachlor, metolachlor). Different solid substrates have been compared (C18, cyano, styrene-divinylbenzene, phenyl, graphitic carbon). The type of conditioning and elution solvent, its volume, and the sample flow rate have been considered as variables affecting the recovery yields of the herbicides.The optimized experimental conditions are C18 phase conditioned with 3 mL acetone, loaded with 1 L water sample at 5 mL min⁻¹, and eluted with 3 mL acetone. Good recoveries (included between 79% and 99%) and R.S.D. (included between 2% and 12%) have been obtained for all analytes, except for deethylatrazine whose recovery was 46 ± 7%. The recovery of deethylatrazine increases up to 94 ± 17% if a non-porous graphitic carbon is coupled to the C18 phase, keeping the other parameters constant as optimized. The optimized method has been successfully checked for the identification and quantitation of the selected herbicides in raw and drinking water samples, with quantitation limits as low as 0.01 μg L⁻¹, fully in agreement with the current legislation. The method is easily routinable. After development, the method is currently routinely applied for the analysis of herbicides in waters and, up today, more than one thousand samples have been analysed at the “Laboratorio della Società Metropolitana Acque di Torino” (Laboratory of the Municipal Waterworks of Turin) in charge of the control of drinking water quality in Torino.     

Radiometric determination of uranium in natural waters after enrichment and separation by cation-exchange and liquid-liquid extraction

Preconcentration of uranium from natural water samples using Chelex-100 cation-exchange resin, its selective extraction by tributylphosphate and electrodeposition on stainless steel discs is reported. The validity of the separation procedure and the chemical recoveries were checked by addition of uranium standard solution as well as by tracing with ²³²U. The average uranium yield for the cation-exchange was (97±2)%, for the liquid-liquid extraction was (95±2)% and for the electrodeposition was more than 99%. Employing high-resolution a-spectroscopy, the measured activity of ²³⁸U and ²³⁴U radioisotopes was found to be ~7 mBq^.l^-1 and ~35 mBq^.l^-1 for ground- and seawater samples, respectively. The energy resolution (FWHM) of the α-peaks was 22 keV, the minimum detectable activity (MDA) was estimated to be 1 mBq^.l^-1 (at 95% confidence limit). This revised version was published online in July 2006 with corrections to the Cover Date.     

Trace determination of molybdenum and vanadium in natural waters by means of atomic spectroscopy (AAS, ICP-OES) after preconcentration

Conclusions Mo and V are abundant trace elements in the environment and of great significance for many organisms [1]. Their accurate and precise determination in natural waters by means of AAS and ICP-OES often requires a separation and/or a pre-concentration step. For the reliable and simple separation of Mo and V in the ng/l- to g/l-range, the co-precipitation on Cell-Fe and Cell-In can be applied with good reproducibility. By coupling with atomic spectroscopy, analytical procedures result for ultratrace determination of Mo and V, even in complex water matrices or biological fluids (e.g., urine).

---

Atomspektroskopische Bestimmung (AAS, ICP-OES) von Molybdän- und Vanadium-Spuren in natürlichen Wässern nach Voranreicherung

     

Solvatochromism and preferential solvation of 1,4-dihydroxy-2,3-dimethyl-9,10-anthraquinone by UV-vis absorption and laser-induced fluorescence measurements

Solvation characteristics of 1,4-dihydroxy-2,3-dimethyl-9,10-anthraquinone (1) in pure and binary solvent mixtures have been studied by UV-vis absorption spectroscopy and laser-induced fluorescence techniques. The binary solvent mixtures used as CCl(4) (tetrachloromethane)-DMF (N,N-dimethylformamide), AN (acetonitrile)-DMSO (dimethylsulfoxide), CHCl(3) (chloroform)-DMSO, CHCl(3)-MeOH (methanol), and MeOH-DMSO. The longest wavelength band of 1 has been studied in pure solvents as well as in binary solvent mixtures as a function of the bulk mole fraction. The Vis absorption band maxima show an unusual blue shift with increasing solvent polarity. The emission maxima of 1 show changes with varying the pure solvents and the composition in the case of binary solvent mixtures. Non-ideal solvation characteristics are observed in all binary solvent mixtures. It has been observed that the quantity [nu (12)-(X(1)nu (1)+X(2)nu (2))] serves as a measure of the extent of preferential solvation, where nu and X are the position of band maximum in wavenumbers (cm(-1)) and the bulk mole fraction values, respectively. The preferential solvation parameters local mole fraction (X(2)(L)), solvation index (delta(s2)), and exchange constant (k(12)) are evaluated.     

Determination of Cd in biological samples by flame AAS following on-line preconcentration by complexation with O,O-diethyldithiophosphate and solid phase extraction with Amberlite XAD-4

A method for the on-line preconcentration of Cd based on its complex formation with the ammonium salt of O,O-diethylditiophosphate (DDTP) and using the Amberlite XAD-4 resin as a solid support in a column is proposed. Cadmium was detected by flame atomic absorption spectrometry. Different conditions, such as complexing agent concentration, preconcentration time, solutions flow rates and nature and concentration of the eluent were optimized. Different detection limits (LODs) could be established by using different preconcentration times, between 30 s and 5 min, with corresponding LODs from 5 to 1 μg L⁻¹, respectively. The method was validated by analyzing five biological certified samples. The relative standard deviation was usually around 3%, indicating a very good precision. The found concentrations values are in agreement with the certified ones, according to the t-test, for a confidence level of 95%. Enriched seawaters were also analyzed, and the recoveries were between 93 and 108%. The FI method is very simple and probably can be coupled to other measuring analytical techniques.     

Investigation of radioactive lead,uranium, and thorium in environmental waters by extraction chromatography resins

A time-saving and sensitive method for monitoring low concentration (activities) of ²¹⁰Pb, ²³²Th, and ²³⁰Th and ²³⁸U, ²³⁴U, and ²³⁵U in water samples has been developed. Through the combination of co-precipitation and extraction chromatography by 3M RAD disks and UTEVA (Eichrom) columns effective radiochemical separation of the analytes was carried out. Thorium and uranium activities were determined by alpha spectrometry and lead activity by LSC, respectively. The minimal detectable activities obtained were 0.6?Bq?m^?3 for uranium, 0.29?Bq?m^?3 for thorium, and 2.5?Bq?m^?3 for ²¹⁰Pb. More than 150 different waters were analysed for uranium content and only 30 for lead and thorium. The investigations are still in progress.