Electrodeposition of thermoelectric Bi2Te3 thin films with added surfactant

Bismuth telluride (Bi₂Te₃) thin films were electrodeposited at room temperature from nitric baths in the presence of a surfactant, cetyltrimethylammonium bromide (CTAB). Nearly stoichiometric Bi₂Te₃ thin films were obtained from electrolytes containing 7.5 mM Bi(NO₃)₃. The surface morphology and mechanical properties of the electrodeposited thin film were improved by the addition of CTAB to the electrolyte, while the electrical and thermoelectric properties were preserved. Post-deposition annealing in a reducing environment did not improve the electrical and thermoelectric properties, possibly because the change in the microstructure of the Bi₂Te₃ thin film was too small.     

Temperature dependence of the Raman spectra of Bi2Te3 and Bi0.5Sb1.5Te3 thermoelectric films

The temperature dependence of the Raman spectra of Bi₂Te₃ and Bi_0.5Sb_1.5Te₃ thermoelectric films was investigated. The temperature coefficients of the E_g(2) peak positions were determined as –0.0137 cm^–1/°C and –0.0156 cm^–1/°C, respectively. The thermal expansion of the crystal caused a linear shift of the Raman peak induced by the temperature change. Based on the linear relation, a reliable and noninvasive micro‐Raman scattering method was shown to measure the thermal conductivity of the thermoelectric films. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Microstructure of thermoelectric (Bi0.15Sb0.85)2Te3 film

The film of thermoelectric ternary p-type (Bi_0.15Sb_0.85)₂Te₃ was deposited on polyimide foil substrate at 168 °C using direct-current magnetron sputtering. Microstructural investigations of the film were performed by electron microscopy techniques. SEM observations showed that the film surface consisted of large-sized particulates with small-sized particles and also mound-like crystal agglomerates in some areas. Chemical composition of the film was analyzed using energy-dispersive X-ray spectrometer (EDS). It has been observed that the EDS results were in an agreement with nominal composition for the film. Detailed microstructural investigations were carried out using transmission electron microscopy (TEM). TEM images and selected area electron diffraction patterns showed that the film has randomly oriented polycrystalline grain structure. High-resolution TEM images indicated that the microstructure of film also contained nano-crystal structure, smaller than 10 nm.     

Thermoelectric properties of Bi2Se3/Bi2Te3/Bi2Se3 and Sb2Te3/Bi2Te3/Sb2Te3 quantum well systems

In this work, we develop a theory of thermoelectric transport properties in two-dimensional semiconducting quantum well structures. Calculations are performed for n-type 0.1 wt.% CuBr-doped Bi₂Se₃/Bi₂Te₃/Bi₂Se₃ and p-type 3 wt.% Te-doped Sb₂Te₃/Bi₂Te₃/Sb₂Te₃ quantum well systems in the temperature range 50–600 K. It is found that reducing the well thickness has a pronounced effect on enhancing the thermoelectric figure of merit (ZT). For the n-type Bi₂Se₃/Bi₂Te₃/Bi₂Se₃ with 7 nm well width, the maximum value of ZT is estimated to be 0.97 at 350 K and for the p-type Sb₂Te₃/Bi₂Te₃/Sb₂Te₃ with well width 10 nm the highest value of the ZT is found to be 1.945 at 440 K. An explanation is provided for the resulting higher ZT value of the p-type system compared to the n-type system.     

High pressure transport characteristics of Bi2Te3, Sb2Te3, and BiSbTe3

This paper presents ambient and high pressure measurements of transport properties of the Bi₂Te₃–Sb₂Te₃ series of materials. The electrical resistivity, thermal conductivity, and Seebeck coefficient have been measured on both end compounds and the direct solid solution of the two at pressure up to 10 GPa. An additional discussion involving the high pressure structure will be presented. From this, it was determined that these materials undergo at least two structural phase transitions between 0 and 20 GPa and a discussion is presented regarding this and the changes in the transport properties.     

Density functional study of Bi2Te3 and Bi4Te6 molecules

Results of a density functional study for the molecules Bi₂Te₃ and Bi₄Te₆ are reported here. For Bi₂Te₃, calculations yield eight stable conformations. For Bi₄Te₆, eight stable isomers are identified. Equilibrium geometries, adiabatic ionisation potentials, atomisation energies, and vibrational bands are estimated. The lowest energy conformations in both cases are clusters of C_s symmetry with all Te atoms two-fold coordinated and all Bi atoms three-fold coordinated. The predicted low energy conformation for Bi₄Te₆ has alternating rows of Bi and Te atoms. This molecule seems a reasonable precursor to solid bismuth telluride, which has alternating Bi and Te layers.     

Investigation of the possibilities for increasing the thermoelectric figure of merit of nanostructured materials based on Bi2Te3-Sb2Te3 solid solutions

The transport coefficients and thermoelectric figure of merit ZT for bulk nanostructured materials based on Bi₂Te₃-Sb₂Te₃ solid solutions have been investigated theoretically. Similar materials prepared by rapid quenching of the melt with the subsequent grinding and sintering contain amorphous and nanocrystalline regions with different sizes of particles. According to the performed estimations, the thermoelectric figure of merit of the amorphous phase can exceed the value of ZT for the initial solid solution by a factor of 2?C3 primarily due to the significant decrease in the thermal conductivity. The effective transport coefficients of the medium as a whole have also been investigated as a function of the parameters of each phase, and the concentration range of the amorphous phase, which corresponds to the effective values ZT > 1, has been determined.     

Specific features of Bi2Te3 doping with Sn

The effect of doping bismuth telluride with tin, on its electrophysical properties, has been studied. It is shown that the main features in the transport coefficients of Bi₂Te₃:Sn can be explained by the existence of resonant Sn states within the valence band. The existence of resonant Sn states was confirmed by codoping Bi₂Te₃:Sn with the electroactive impurity I. Fiz. Tverd. Tela (St. Petersburg) 40, 1428–1432 (August 1998)     

Probing the thermoelectric transport properties of n-type Bi2Te3 close to the limit of constitutional undercooling

Bulk n-type Bi2Te3 single crystals with optimized chemical composition were successfully prepared by a high temperature-gradient directional solidification method. We investigate the influence of alloy microstructure, chemical composition, and growth orientation on the thermoelectric transport properties. The results show that the composition of single-crystal Bi2Te3 alloy, along the c axis direction, could be slightly tuned by changing the growth rate of the crystal. At a rate of 18 mm/h, the formed Bi2Te3 crystal exhibits good thermoelectric properties. At 300 K, a maximum Seebeck coefficient of -245 μV/K and an electrical conductivity of 5.6 × 10 4 S/m are acquired. The optimal power factor is ob- tained as 3.3 × 10 -3 W/K2m, with a figure of merit of 0.74. It can be attributed to the increased tellurium allocation in the Bi2Te3 alloys, as verified well by the density functional theory caLculations.     

Surface states of charge carriers in epitaxial films of the topological insulator Bi2Te3

The galvanomagnetic properties of p-type bismuth telluride heteroepitaxial films grown by the hot wall epitaxy method on oriented muscovite mica substrates have been investigated. Quantum oscillations of the magnetoresistance associated with surface electronic states in three-dimensional topological insulators have been studied in strong magnetic fields ranging from 6 to 14 T at low temperatures. The cyclotron effective mass, charge carrier mobility, and parameters of the Fermi surface have been determined based on the results of analyzing the magnetoresistance oscillations. The dependences of the cross-sectional area of the Fermi surface S(k _F), the wave vector k _F, and the surface concentration of charge carriers n _s on the frequency of magnetoresistance oscillations in p-type Bi₂Te₃ heteroepitaxial films have been obtained. The experimentally observed shift of the Landau level index is consistent with the value of the Berry phase, which is characteristic of topological surface states of Dirac fermions in the films. The properties of topological surface states of charge carriers in p-type Bi₂Te₃ films obtained by analyzing the magnetoresistance oscillations significantly expand fields of practical application and stimulate the investigation of transport properties of chalcogenide films.     

Heterodiffusion of selenium in Bi2Te3

We present results for the anisotropic diffusion coefficient of selenium, isoelectronic impurity, in Bi₂Te₃ along the solidus. The experimental conditions permitted us to obtain a definite stoichiometric deviation, and diffusion profiles were obtained by SIMS.     

Electronic structures and thermoelectric properties of La or Ce-doped Bi2Te3 alloys from first principles calculations

Thermoelectric properties of La or Ce-doped Bi₂Te₃ alloys were systematically investigated by ab initio calculations of electronic structures and Boltzmann transport equations. The Seebeck coefficient of p-type LaBi₇Te₁₂ and La₂Bi₆Te₁₂ was larger than that of Bi₂Te₃, because La doping increased the effective mass of carriers. On the other hand, the electrical conductivity of LaBi₇Te₁₂ and La₂Bi₆Te₁₂ decreased, which caused a reduction of power factor of these La-doped Bi₂Te₃ alloys in comparison with Bi₂Te₃. The influence of Ce doping on the band structure and thermoelectric properties of Bi₂Te₃ was similar to that of La doping. The theoretical calculation provided an insight into the transport properties of La or Ce-doped Bi₂Te₃-based thermoelectric materials.     

Doping effects on the thermoelectric properties of Cu-intercalated Bi2Te2.7Se0.3

We herein report an enhancement of the thermoelectric performance of spark plasma sintered polycrystalline n-type Bi₂Te_2.7Se_0.3 by the intercalation of Cu and the doping of Al on Bi-sites. Through the intercalation of a small amount of Cu (0.008), the reproducibility could be significantly improved, with ZT was enhanced from 0.64 to 0.73 at 300 K due to the reduced lattice thermal conductivity benefiting from intensified point-defect phonon scattering. We also found that Al is an effective doping element for power factor enhancement and for reducing the lattice thermal conductivity of Cu-intercalated Bi₂Te_2.7Se_0.3. With these synergetic effects, an enhanced ZT values of 0.78 at 300 K and 0.81 at 360 K were obtained in 1 at% Al-doped Cu_0.008Bi₂Te_2.7Se_0.3 (Cu_0.008Bi_1.98Al_0.02Te_2.7Se_0.3).     

粗糙界面对Bi2Te3/PbTe超晶格热电优值影响的理论分析

以Bi2Te3/PbTe超晶格薄膜为例,分析电子在Bi2Te3量子阱中的输运过程,综合了薄膜的经典散射效应和理想量子效应,并以此混合效应为基础,在PbTe障碍层厚度一定时,模拟计算了两种混合效应中量子效应占不同比例时,Bi2Te3/PbTe超晶格热电优值的变化.在镜面反射占混合效应的0 3时,得到的热电优值与当前报道的量子阱超晶格的实验值接近.     

TeI4掺杂量对n型Bi2Te3基烧结材料热电性能的影响

采用区熔法结合放电等离子体快速烧结(SPS)技术制备了n型Bi2Te3基热电材料.在300-500K的温度范围内测量了各热电性能参数,包括电导率(σ)、塞贝克系数(α)和热导率(κ),研究了掺杂剂TeI4的含量(质量百分比分别为0,0.05,0.08,0.10,0.13和0.15wt%)对热电性能的影响.结果表明:试样的载流子浓度(n)随TeI4含量增加而增大,使电导率增大、塞贝克系数的绝对值先增大而后减小,从而导致品质因子(α2σ)呈先增加后降低的变化趋势;同时,由于异质离子(I-)以及载流子对声子的散射作用增强,可显著降低其晶格热导率.烧结材料的性能优值(ZT=α2σT/κ)对应于TeI4含量为0.08wt%有其最大值,约为0.92.此外,烧结材料的抗弯强度增加至80MPa左右,从而可以显著改善材料的可加工性以及元器件的使用可靠性.     

Energy formation of antisite defects in doped Sb2Te3 and Bi2Te3 crystals

The free carrier concentration of the Sb_2−xIn_xTe₃, Bi_2−xIn_xTe₃ and Bi₂Te_3−xS_x crystals has been determined from the values of the Hall constants and the free carrier concentration of the Sb_2−xTl_xTe₃ has been calculated from the plasma resonance frequency; with increasing value of x, the hole concentration decreases. As the incorporation of the elements In, Tl and S into the lattice Sb₂Te₃ or Bi₂Te₃, respectively, gives rise to the uncharged defects In^x_Sb, Tl^x_Sb, In^x_Bi and S^x_Te, the x causes the decrease of the antisite defects concentration. The proven effect is explained in the following way: the antisite defects can be created only in crystals whose atoms are bound by weakly polarized bonds. The incorporation of In, Tl and S atoms into the crystal lattice of Sb₂Te₃ or Bi₂Te₃ increases the bond polarity, the ionicity of ternary crystals increases. This unfavorably affects the increase of antisite defects whose concentration decreases. The change of the bond polarity is considered from the changes discovered in the formation energy of antisite defects of the above mentioned ternary crystals.     

Ultrasonic-assisted size-controllable synthesis of Bi2Te3 nanoflakes with electrogenerated chemiluminescence

Bi(2)Te(3) hexagonal nanoflakes with controllable edge length ranging from approximately 150 nm to as small as approximately 10nm were synthesized via an ultrasonic-assisted disproportionation route, using Te powder and Bi(NO(3))(3).5H(2)O as raw materials. The mechanochemical effects of the ultrasonic irradiation accelerated the reaction and were helpful to obtain relatively small and uniform nanocrystals. The products were characterized by X-ray powder diffraction, X-ray photoelectron spectra, transmission electron microscopy, and selected area electron diffraction techniques. Electrogenerated chemiluminescence of as-prepared Bi(2)Te(3) was also reported for the first time.