Sensitive turn-on fluorescent detection of tartrazine based on fluorescence resonance energy transfer

We introduce a sensitive, rapid, label-free and general fluorescent method for the determination of tartrazine by competitive binding to reduced graphene oxide (rGO) against fluorescein, and the fluorescence recovery upon fluorescein desorption from rGO provides a quantitative readout for tartrazine, giving a detection limit of 0.53 ng mL(-1).     

Sensitive turn-on fluorescent detection of melamine based on fluorescence resonance energy transfer

We here report a novel fluorescent method for the detection of melamine based on the high fluorescence quenching ability of gold nanoparticles. The fluorescence was significantly quenched via fluorescence resonance energy transfer when fluorescein molecules were attached to the surface of gold nanoparticles by electrostatic interaction. Upon addition of melamine, the fluorescence was enhanced due to the competitive adsorption of gold nanoparticles between melamine and fluorescein. Under the optimum conditions, the fluorescence enhancement efficiency [(I-I(0))/I(0)] showed a linear relationship with the concentration of melamine in the range of 1.0 × 10(-7) mol L(-1)~4.0 × 10(-6) mol L(-1), and the detection limit was calculated to be 1.0 × 10(-9) mol L(-1). The proposed method showed several advantages such as high sensitivity, short analysis time, low cost and ease of operation.     

A low-cost surface plasmon resonance instrument based on detection of resonance excitation wavelength

A laboratory-made surface plasmon resonance (SPR) instrument based on the detection of resonance excitation wavelength has been successfully fabricated. The performance and workability of the SPR instrument was demonstrated as a DNA biosensor. Biotinylated single-stranded oligonucleotides (ssDNA) were chemically immobilized on a gold-film surface of the SPR instrument as a DNA probe for the detection of its fully complementary, half-complementary and non-complementary ssDNA. The immobilization of the ssDNA probe was done by avidin-biotin linkage. The ssDNA used were 12-mer oligonucleotides. The sensing mechanism was based on the shift in resonance wavelength of an excitation light beam as the target ssDNA hybridized with the ssDNA on the gold-film surface. The linear dynamic ranges of the DNA biosensor for fully complementary and half-complementary ssDNA are 0.04-1.2 pM and 0.08-1.1 pM, respectively. The DNA biosensor showed higher sensitivity to fully complementary ssDNA than to half-complementary ssDNA. But no shift of resonance wavelength to the non-complementary ssDNA was observed.     

Characterisation of antibodies and analytes by surface plasmon resonance for the optimisation of a competitive immunoassay based on energy transfer

The determination of binding constants using surface plasmon resonance (SPR) was introduced to optimise a competitive homogeneous fluorescence energy-transfer immunoassay (ETIA) before labelling. Steroids were chosen as model for the detection of three analytes estrone, estradiol and ethinylestradiol--by taking three polyclonal antibodies (anti estrone-, anti estradiol- and anti estrogen-antibodies) and the corresponding analyte derivatives used for the immunisation. The active concentration of the antibodies was determined before and after labelling. Inhibition curves were recorded using SPR for all possible combinations of analyte, antibody, and analyte derivatives. The experiments revealed that the active antibody concentration can be reduced to 30% whereas the antibody affinity is not affected by the labelling process. Limits of the use of SPR for determination of affinity constants in solution are discussed. All possible ETIA calibration for the quantification of estrone and estradiol was performed. The lower limits of detection for estrone (0.06 microg L(-1)) and estradiol (0.17 microg L(-1)) were reached with the anti-estrogen IgG and its derivative     

Simple chemiluminescence aptasensors based on resonance energy transfer

In the present work, two aptamer-based probes and related sensor systems were developed with chemiluminescence signaling. The detection was based on "turning-on" chemiluminescence with switching "off" of the resonance energy transfer after the aptamer's recognition of the target molecule. In this design, a DNA/aptamer duplex linked a chemiluminescence group and a gold nanoparticle together. Only low-intensity chemiluminescence was obtained due to the highly efficient resonance energy transfer. After introducting the target molecule, structure-switching took place with turning off the energy transfer; thus, a restoration and turning on of the chemiluminescence was obtained. The two designs differed in the chemiluminescence groups, since one was a covalently linked luminol molecule, while the other was a conjugated horseradish peroxidase for the catalysis of further chemiluminescence reactions. These schemes provided simple and effective sensing toward a model analyte, adenosine.     

Shape-specific detection based on fluorescence resonance energy transfer using a flexible water-soluble conjugated polymer

We present the detection of the shape-specific conformation of DNA based on the fluorescence resonance energy transfer (FRET) by using a novel flexible water-soluble cationic conjugated polymer (CCP). The flexible backbone of CCP has more conformational freedom with the potential to be responsive to analyte shape by electrostatic interaction between flexible CCP and negatively charged DNA. The analyte shape dependent recognition is accomplished by structural changes that compressed or extended the flexible CCP. The morphology-dependent spectral properties of the novel flexible polymer related to the analyte shapes are investigated in detail, where two types of chromophores, referred to as "isolated" segment and "packed" segment aggregates, within the flexible polymer are identified by means of ensemble and single molecule measurements upon binding with different geometric DNA. The change in fluorescence intensity upon binding with shape-specific DNA without obvious color shifts makes this novel flexible polymer a suitable CCP donor for FRET measurements. The results provide insights for understanding the spectral properties of flexible water-soluble CCP and CCP/DNA interaction related to the geometry of target analyte.     

Application of octadecanethiol self-assembled monolayer to cholesterol biosensor based on surface plasmon resonance technique

Octadecanethiol (ODT) self-assembled monolayer (SAM) prepared onto gold-coated glass plate has been modified by using nitrene reaction of 1-fluoro-2-nitro-4-azidobenzene (FNAB) that further covalently binds to cholesterol oxidase (ChOx) via thermal reaction. FNAB acts as a bridge (cross-linker) between SAM and ChOx. The ChOx/FNAB/ODT/Au electrode thus fabricated has been characterized using contact angle (CA) measurements, UV-vis spectroscopy, electrochemical techniques and X-ray photoelectron spectroscopy (XPS) technique, respectively. This ChOx/FNAB/ODT/Au bioelectrode has been utilized for estimation of cholesterol in solution using surface plasmon resonance (SPR) technique. This SPR based cholesterol biosensor has linearity from 50 to 500 mg/dl of cholesterol in solution with lower detection limit of 50 mg/dl and shelf life of about 2 months when stored at 4 °C.     

基于锰掺杂量子点的噁喹酸荧光共振能量转移检测研究

基于噁喹酸对锰掺杂硫化锌量子点的荧光猝灭作用,建立了一种噁喹酸荧光共振能量转移检测方法.噁喹酸对量子点的荧光猝灭是由于生成了新的复合物而造成的静态猝灭,二者相互作用过程中焓变ΔH ＜ 0,熵变ΔS ＜ 0,分子间作用力为氢键或范德华力.在0～65 μg/L线性范围内,噁喹酸质量浓度与量子点荧光抑制率呈现良好的线性关系(...     

量子点荧光共振能量转移检测赭曲霉毒素A

基于量子点与荧光猝灭基团之间构成的荧光共振能量转移体系,以量子点标记赭曲霉毒素A适配体与荧光猝灭基团标记的补体杂交构成荧光传感探针,当有赭曲霉毒素A存在时,由于其适配体与赭曲霉毒素A的高度亲和作用,使传感探针上结合的荧光猝灭剂减少,荧光增强,从而建立了一种检测赭曲霉毒素A的荧光分析方法.该方法简单、快速、特异性强,在适...     

Electrochemiluminescent detection of mucin 1 protein and MCF-7 cancer cells based on the resonance energy transfer

A novel sensing strategy for sensitive detection of mucin 1 protein (MUC1) and MCF-7 cells based on electrochemiluminescence (ECL) resonance energy transfer (ERET) from bis(2,2'-bipyridine)-(5-aminophenanthroline)ruthenium(II) (Ru1) to graphene oxide (GO) was proposed. The MUC1 aptamer was covalently combined with Ru1 (Ru1-aptamer) using aqueous carbodiimide coupling chemistry. Due to the strong noncovalent interaction between the Ru1-aptamer and GO, the ECL of Ru1 was efficiently quenched because of the ERET. In the presence of a target MUC1 protein, the binding between the Ru1-aptamer and MUC1 disturbed the interaction between the Ru1-aptamer and GO. These interactions led to the release of the Ru1-aptamer from GO, and resulted in the restoration of Ru1 ECL. This was shown to detect MUC1 protein sensitively in a linear range from 64.9 to 1036.8 nM with a detection limit of 40 nM. With further application in the detection of MCF-7 cells, the presented method could respond at concentrations as low as 30 cancer cells per mL. By substituting the aptamer and the corresponding target, this method could be conveniently extended for the sensitive detection of other biomolecules.     

Continuous-flow protease assay based on fluorescence resonance energy transfer

A homogeneous continuous-flow assay using fluorescence resonance energy transfer (FRET) for detection was developed to measure the hydrolysis of HIV Protease Substrate 1 (to which two choromophores, EDANS and DABCYL are covalently attached) by a protease (e.g. Subtilisin Carlsberg) and the influence of inhibitors. In the continuous-flow assay, an inhibitor solution and an enzyme solution were first eluted into the system and allowed to react with each other in a reaction coil. Subsequently, the substrate solution was added to an enzyme-inhibitor mixture in a second reaction coil and incubated for 1 min. Finally, the fluorescence intensity was monitored.The system was also utilized to measure the inhibition of the protease by two weak acidity inhibitors which are 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride (AEBSF) and ethylenediaminetetraacetic acid (EDTA). Using the obtained optimum conditions for AEBSF, a detection limit of 0.3 mmol/l was achieved and the relative standard deviation was below 3.7% in the 2.5-7.5 mmol/l range. For EDTA, which required a 20 times higher substrate concentration than AEBSF, a detection limit of 0.2 mmol/l was obtained and the relative standard deviation was below 9.6% in the 0.5-7.5 mmol/l range.The optimization of pH, substrate concentration, enzyme concentration, reaction time and temperature are described. Organic modifier effects were also investigated. Methanol, acetonitrile and DMSO could be tolerated up to 30%.     

Optical detection of phenolic compounds based on the surface plasmon resonance band of Au nanoparticles

An indirect colorimetric method is presented for detection of trace amounts of hydroquinone (1), catechol (2) and pyrogallol (3). The reduction of AuCl4(-) to Gold nanoparticles (Au-NPs) by these phenolic compounds in the presence of cetyltrimethylammonium chloride (CTAC) produced very intense surface plasmon resonance peak of Au-NPs. The plasmon absorbance of Au-NPs allows the quantitative colorimetric detection of the phenolic compounds. The calibration curves derived from the changes in absorbance at lambda = 568 nm were linear with concentration of hydroquinone, catechol and pyrogallol in the range of 7.0 x 10(-7) to 1.0 x 10(-4)M, 6.0 x 10(-6) to 2.0 x 10(-4)M and 6.0 x 10(-7) to 1.0 x 10(-4)M, respectively. The detection limits were 5.3 x 10(-7), 2.5 x 10(-6) and 3.2 x 10(-7)M for the hydroquinone, catechol and pyrogallol, respectively. The method was applied satisfactorily to the determination of phenolic compounds in water samples and pharmaceutical formulations.     

Nucleic acid sensor for M. tuberculosis detection based on surface plasmon resonance

Cysteine modified NH(2)-end peptide nucleic acid (PNA) (24-mer) probe and 5'-thiol end labeled deoxyribonucleic acid (DNA) probes specific to Mycobacterium tuberculosis have been immobilized onto BK-7 gold coated glass plates for the detection of complementary, one-base mismatch, non-complementary targets and complementary target sequence in genomic DNA of Mycobacterium tuberculosis using a surface plasmon resonance (SPR) technique. The DNA/Au and PNA/Au bio-electrodes have been characterized using contact angle, atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetric (CV) techniques, respectively. It is revealed that there is a 252 millidegrees SPR angle change in the case of PNA immobilization and 205 millidegrees for DNA immobilization, indicating increased amount of immobilized PNA molecules. Hybridization studies reveal that there is no binding of the non-complementary target to DNA/Au and PNA/Au electrode. Compared to the DNA/Au bioelectrode, PNA/Au electrode has been found to be more efficient for detection of one-base mismatch sequence. The PNA/Au bioelectrode shows better detection limit (1.0 ng ml(-1)) over the DNA-Au bioelectrode (3.0 ng ml(-1)). The values of the association (k(a)) and dissociation rate constant (k(d)) for the complementary sequence in case of the PNA/Au bioelectrode have been estimated as 8.5 x 10(4) m(-1) s(-1) and 3.6 x 10(-3) s(-1), respectively.     

Homogeneous non-competitive bioaffinity assay based on fluorescence resonance energy transfer

A homogeneous non-competitive assay principle for measurement of small analytes based on quenching of fluorescence is described. Fluorescence resonance energy transfer (FRET) occurs between the donor, intrinsically fluorescent europium(III)-chelate conjugated to streptavidin, and the acceptor, quencher dye conjugated to biotin derivative when the biotin-quencher is bound to Eu-streptavidin. Fluorescence can be measured only from those streptavidins that are bound to biotin of the sample, while the fluorescence of the streptavidins that are not occupied by biotin are quenched by quencher-biotin conjugates. The quenching efficiencies of the non-fluorescent quencher dyes were over 95% and one dye molecule was able to quench the fluorescence of more than one europium(III)-chelate. This, however, together with the quadrovalent nature of streptavidin limited the measurable range of the assay to 0.2-2 nmol L⁻¹. In this study we demonstrated that FRET could be used to design a non-competitive homogeneous assay for a small analyte resulting in equal performance with competitive heterogeneous assay.     

一种萘酰亚胺类荧光共振能量转移型光酸探针

合成了一种未见文献报道的键合螺噁嗪单元的1,8-萘二甲酰亚胺类化合物3,通过核磁共振谱和高分辨质谱确证了其结构.化合物在某些有机溶剂中和粉末状态下都能发射较强的荧光,研究了化合物3在二甲基亚砜中聚集诱导荧光增强(AIE)性质.在滤纸上以及用薄层层析硅胶(TLC)都能检测到螺噁嗪单元的光致变色现象;螺噁嗪单元酸致开环产物...     

All organic host-guest crystals based on a dumb-bell-shaped conjugated host for light harvesting through resonant energy transfer

Together we glow: Fully organic host-guest crystals with two dyes inserted in their parallel nanochannels display broad emission in the visible range thanks to resonant energy transfer. The conjugated host crystal provides light harvesting in the UV region.     

Label-free detection of adenosine based on fluorescence resonance energy transfer between fluorescent silica nanoparticles and unmodified gold nanoparticles

A sensitive and convenient strategy was developed for label-free assay of adenosine. The strategy adapted the fluorescence resonance energy transfer property between Rhodamine B doped fluorescent silica nanoparticles (SiNPs) and gold nanoparticles (AuNPs) to generate signal. The different affinities of AuNPs toward the unfolded and folded aptamers were employed for the signal transfer in the system. In the presence of adenosine, the split aptamer fragments react with adenosine to form a structured complex. The folded aptamer cannot be adsorbed on the surface of AuNPs, which induces the aggregation of AuNPs under high ionic concentration conditions, and the aggregation of AuNPs leads to the decrease of the quenching ability. Therefore, the fluorescence intensity of Rhodamine B doped fluorescent SiNPs increased along with the concentration of adenosine. Because of the highly specific recognition ability of the aptamer toward adenosine and the strong quenching ability of AuNPs, the proposed strategy demonstrated good selectivity and high sensitivity for the detection of adenosine. Under the optimum conditions in the experiments, a linear range from 98 nM to 100 μM was obtained with a detection limit of 45 nM. As this strategy is convenient, practical and sensitive, it will provide a promising potential for label-free aptamer-based protein detection.