A NOVEL INTERPRETATION OF CONCENTRATION DEPENDENCE OF VISCOSITY OF DILUTE POLYMER SOLUTION*

The concentration dependence of the reduced viscosity of dilute polymer solution is interpreted in the light of anew concept of the self-association of polymer chains in dilute solution. The apparent self-association constant is defined asthe molar association constant divided by the molar mass of individual polymer chain and is numerically interconvertiblewith the Huggins coefficient. The molar association constant is directly proportional to the effective hydrodynamic volume ofthe polymer chain in solution and is irrespective of the chain architecture. The effective hydrodynamic volume accounts forthe non-spherical conformation of a short polymer chain in solution and is a product of a shape factor and hydrodynamicvolume. The observed enhancement of Huggins coefficient for short chain and branched polymer is satisfactorily interpretedby the concept of self-association. The concept of self-association allows us to predict the existence of a boundaryconcentration C_s (dynamic contact concentration) which divides the dilute polymer solution into two regions.     

A STUDY ON THE STRUCTURE AND PROPERTIES OF POLYBUTYLALDEHYDE FORMED IN LOW TEMPERATURE PLASMA

The polybutylaldehyde obtained by plasma polymerization was investigated by means of IR, X-ray diffraction, GC-MS, elementary analysis, TEM, electron diffraction and contact angle measurements etc. The results showed that the polymer formed in plasma is amorphous crosslinked polymer, and its backbone is made of carbon atoms. The surface energy of the polymer film is independent of the polymerization conditions. No addition reaction has taken place in the carbonyl group of butylaldehyde in the plasma condition. The result of the wettability measurements showed that the polymer film is generally hydrophobic and the surface energy of the film is about 41 dyn/cm, in which the dispersion force contribution is the majority. The electron diffraction proved that some crystal substance, even the single crystals were present in the polymer. X-ray diffraction also proved the presence of crystal and showed about 15% crystaUinity fraction.     

Diffusion Mode Transition between Gaussian and Non-Gaussian of Nanoparticles in Polymer Solutions

The dynamic density functional theory is applied to study the diffusion of nanoparticles in polymer solutions, in which different diffusion modes have been identified by exploiting the density and free energy evolutions. Under the condition of low polymer concentration, diffusion is controlled by particle free motion with a normal Gaussian type. As the concentration increases, the non- Gaussian behavior can be observed when the particle size is comparable to the correlation length of polymer chain. Particles need to penetrate through a cage and overcome an entropic barrier, where the hopping and the model-coupling diffusion coexist. Further increase of polymer concentration can result in complete restriction of the particle by surrounding polymer segments. In this case, the non-Gaussian process fades away, and particle diffusion is controlled by Rouse dynamics of polymer chains with the generalized Gaussian characteristics.     

Studies on the Chromogen of the Tussah Cocoon Layer and its Chromophoric Mechanism

The tawny cocoon of tussah has been studied by means of UV, FS and ESR. It has been shown that the tawny chromogen is a cross-linked polymer of gentisic acid and silk proteins. The formation mechanism of this polymer is also suggested here.     

Synthesis of Cationic PEM Emulsion and Application in Waste Water Treatment

Cationic polymer as a kind of flocculant is widely applied in purification treatment of waste water. Because it has positive charge group, it is able to connect strongly the suspended matters, short cellulose and other microparticles. The research on synthesis of cationic polymer and application in treatment of waste water is very universal abroad. But domestic research on those is not general. The technology of synthesis of PEM is simple , and the production cost is low. It is easy to apply…     

Recent Progress in Donor-Acceptor Type Conjugated Polymers for Organic Field-effect Transistors

The recent progress in the design and synthesis of high-performance donor-acceptor conjugated polymeric semiconducting materials is reviewed from the perspective of multiscale structures. The multiscale of conjugated polymers is from the primary one-dimensional polymer molecular scale to the secondary polymer-chains interaction scale, and then to the tertiary polymer aggregate scale. This review focuses on the design and synthesis of polymer molecules, proposes new classification rules, and rati...     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS XIX:THE POLYMERIZATION OF SUBSTITUTED BENZONITRILES CATALYZED BY COBALTIC ACETYLACETONATE

The polymerization kinetics of 4, 4'-biphenyldicarbonitrile and other substituted ben-zonitriles catalyzed by cobaltic acetylacetonate was studied. The structure of polymer ofdifferent substituted benzonitrile was also determined. It is found that the rate of polymeri-zation and the structure of polymer is greatly affected by the substituent of benzonitriles.     

Studies on Adsorption Behavior and Mechanism of Copper（ Ⅱ ） onto Amino Methylene Phosphonic Acid Resin

IntroductionThe adsorption ability of the functional poly-mer used to enrich metal ions is strong and the op-eration of the functional polymer is convenient.The polymer having adsorbed metal ions can be re-covered by means of an acid or an alkaline solutionand the recovered polymeric material can bereused.The adsorption ability of the polymer withvarious functional groups is different for differentmetals.Because nucleophilic atoms such as oxy-gen,nitrogen,sulphur and phosphorous atoms cancoord…     

Relation between interfacial wave instability and tensile strength of two-layer polymer structure: An experimental study

<正>The existence of interfacial instability at the interface of multilayer polymeric flows is well known.This article is designed mainly to provide guidelines for the development of experimental techniques for the improvement of two-layer polymer products in the polymer processing industry.This is done by performing a series of tensile tests on extrudate two-layer polymer melts in order to get insight into the relation between interfacial wave and mechanical properties of LLDPE/HDPE polymer system.Observed variations of the mechanical properties have been related to the conformation of the interfacial wave so that a relationship between interface morphology corresponding to extrusion instabilities and mechanical characteristics of the interfacial strength for polymer melts extrudate is established.     

Novel Blue Light-emitting PPV-based Copolymer Containing Triazole and Carbazole Units

For making the polymer light-emitting diode (PLED) device with good performance, it is desirable to reach the balance of electron and hole injection. However, for most conjugated polymer, hole injection is more favorable than electron injection. So it is important to design and synthesize the bipolar conjugated polymer with both electron and hole transporting ability for the fabrication of single-layer PLED1-2. In this communication we present the synthesis and preliminary characterizatio…     

Control Aggregation of P3HT in Solution for High Efficiency Doping: Ensuring Structural Order and the Distribution of Dopants

Molecular doping is one of the most important tools to manipulate the electrical properties of conjugated polymers for application in organic optoelectronics. The polymer crystallinity and distribution position of the dopant crucially determine electrical conductivity of the doped polymer. However, in solution-mixed doping, the interplay between polymer and dopant leads to highly structural disorder of polymer and random arrangement of dopant. Here, we propose a strategy to ensure the dopant ind...     

Al3+交联聚合物分子构型及其影响因素

The chemical composition, percolation performace, and microscopic configuration of“intramolecular cross鄄linked”gel systems were investigated by changing the contents of Na+, Ca2+, Mg2+ ions and polymer concentration in water solvent. The results show that the viscosity of“intramolecular cross-linked”polymer solution changes not too much with time, but the resistance factor and residual resistance factor are obviously larger than those of the ordinary polymer solution with the same viscosity, and the residual resistance factor is larger than the resistance factor. The contents of Na+, Ca2+ and Mg2+ ions and polymer concentrations will affect the molecular configuration of the cross-linked polymer, in which the effect of Ca2+ and Mg2+ is the largest.     

Plasticized polymer electrolyte membranes based on PEO/PVdF-HFP for use as an effective electrolyte in lithium-ion batteries

Plasticized polymer electrolytes were prepared using poly(ethylene oxide)(PEO)/poly(vinylidene fluoridehexafluoro propylene)(PVd F-HFP) with lithium perchlorate(Li Cl O4) and different plasticizers. XRD and FTIR spectroscopic techniques were used to characterize the structure and the complexation of plasticizer with the host polymer matrix. The role of interaction between polymer hosts and plasticizer on conductivity is discussed using the results of alternating current(a.c.) impedance studies. TG-DTA and SEM were used for thermal and physical characterizations. Maximum ionic conductivity(3.26 × 10~(-4) S·cm~(-1)) has been observed for ethylene carbonate(EC)-based polymer electrolytes. Electrochemical performance of the plasticized polymer electrolyte is evaluated in LiFePO_4/plasticized polymer electrolytes(PPEs)/Li coin cell. Good performance with low capacity fading on charge discharge cycling is demonstrated.     

^1H NMR Study of Polyvinylalcohol Irradiated by Ultra-violet

The effect of Ultra-violet light on the structure and motion of the polyvinyl alcohol (PVA) chains was studied by IH NMR, spin-lattice relaxation and IR spectroscopy. The results indicated that with the increase of irradiation time, the intensity of the polymer hydroxyl proton peaks decreased and finally vanished, which suggested the self-condensation between the hydroxyl groups proceeded. No methyl proton peaks appeared in the spectra after irradiation shows that there is no cleavage of polymer chain. The longer the irradiation time is, the wider the proton peak of the residual water of the solvent is and it shifted toward low field. This result implies that the hydrogen bonds formed between the polymer and the residual water. The absorption peak of hydroxyl group of the polymer moves toward the lower wave number in the IR spectrum that showed the existence of the hydrogen bonds between the PVA macromolecules.     

INTERMOLECULAR AND INTRAMOLECULAR INTERACTIONS OF POLYMER GUAR GUM IN SOLUTIONS

The tetrahedral borate ion can crosslink with polymer guar gum in aqueous solutions. If the concentration of guar gum is less than 0.045 g/dL, the intramolecular interaction between guar gum and borate ion increases due to the formation of crosslinks. As a result, the polymer chains of guar gum in solution shrink in size and the reduced viscosity of polymer solution decreases accordingly. On the other hand, if the concentration of guar gum is greater than 0.045 g/dL, the intermolecular interaction becomes apparent due to the same reason. The polymer chains, therefore, associate together and the reduced viscosity of polymer solution increases considerably. According to this technique, the critical concentration c^＊, presented by de-Gennes, is determined successfully.     

SYNTHESES AND ANTIMICROBIAL ACTIVITY OF NOVEL POLYURETHANE IONOMERS

This study is concerned with the removal of Staph aureus from water by polyurethaneionomers. All the samples are quaternary ammonium salts which possess a positive chargeon the surface. The ratio of the soft segment to diisocyanate and chain extender is 1:2:1and the ionization degree is 100%. The ionomers strongly capture microbial cells on theirsurfaces in a living state and the hydrophilicity of polymer matrix used in the studyenhanced the affinity of the polymer for bacterial cells. The adhesion of the microorganismto polymer was due mainly to electrostatic interaction between them. The calculation ofthe viable cell count showed that D value for Staph.aureus is not proportional to the nitro-gen concentration. The microorganism capture ability of pyridinium-containing polymer isgreater than that of piperazine based samples.     

Application of Ultrasonic Attenuation Measurements in the Studies on Macromolecular Conformational Behaviors

——Phase Behavior of the Aqueous Solution of Poly(vinyl methyl ether) Sensitive to Temperature and the Modification of the Behavior by Using Poly(acrylic acid) The phase behavior of the aqueous solution of poly(vinyl methyl ether) (PVME) sensitive to temperature and the modification of the behavior by using poly(acrylic acid) (PAA) have been studied by ultrasonic attenuation measurements and fluorescence probe techniques. It has been observed that PVME solution is transparent at room temperature and becomes turbid upon heating. The solution turns clear again as soon as the temperature is decreased to room temperature. The heating and cooling process can be repeated for many times. The phase behavior of the solution sensitive to temperature is attributed to the conformational changes of the polymer. PVME may adopt an open coil conformation at room temperature. With this conformation, the polymer is well miscible with the solvent, water, and thereby the system is a real solution. The polymer may adopt a compact coil conformation when the temperature is higher than a specific value, which is called the LCST (the lower critical solution temperature) of PVME. In this case, the polymer tangles to each other and forms various aggregates, which can scatter incident light and ultrasonic waves greatly, resulting in the phase separation. Introduction of PAA decreases the temperature sensitivity of the phase behavior of the polymer. The nature of the inhibition is attributed to the complexation of PAA with PVME and the strong hydrophilicity of PAA. Results from fluorescence probe studies are in accordance with those from ultrasonic attenuation measurements, indicating again that the ultrasonic attenuation method can be successfully used for the qualitative studies of polymer conformations and complexation between polymers.     

Degradation Action of the Anaerobic Bacteria and Oxygen to the Polymer

Oxygen could prohibit anaerobic bacterium in the produced water and degrade the polymer molecular chains. Aiming at problems making up aerobic polymer solution by the produced water in Daqing Oil Field, some evaluations were done on the viscosity characteristics of polymer solution and bactericide in anaerobic and aerobic environments. Reasonable aerobic concentration of the produced water was obtained. The experimental results indicate that the viscosity of polymer solution confected by the produced water in the aerobic environment is higher than that of the polymer solution confected by the produced water in the anaerobic environment, and the reasonable aerobic concentration is about 6 mg•L^－1. The bactericide has sterilization ability in anaerobic and aerobic environments, but the sterilization effect is better in the aerobic environment.     

Polymer Translocation

The translocation of a polymer through a pore that is much smaller than its size is a fundamental and actively researched topic in polymer physics. An understanding of the principles governing polymer translocation provides important guidance for various practical applications, such as the separation and purification of polymers, nanopore-based single-molecule deoxyribonucleic acid/ribonucleic acid(DNA/RNA) sequencing, transmembrane transport of DNA or RNA, and infection of bacterial cells by ba...     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅦ. THE POLYMERIZATION KINETICS OF CYANOPYRIDINES AND CHARACTERIZATION OF THE FORMED POLYMER*

The polymerization rates of three cyanopyridines catalyzed by cuprous chloride-zinc system are measured, and the structure of the formed polymer is also determined. Compared with aromatic nitrile, cyanopyridines polymerize faster and form polyconjugated polymer with skeleton—(C=N)—_n instead of triazine structure. This chain-polymer possesses semiconductive property, and can be converted into conductive material by thermal treatment. In addition, the polymerization kinetics of 3-cyanopyridine catalyzed by 3-cyanopyridinium perchlorate is investigated. It is found that the polymerization rate is directly proportional to the concentrations of monomer and catalyst, and the activation energy of the polymerization is 103.1 KJ/mol.