An Engineered Superhydrophilic/Superaerophobic Electrocatalyst Composed of the Supported CoMoSx Chalcogel for Overall Water Splitting

The development of high‐efficiency electrocatalysts for large‐scale water splitting is critical but also challenging. In this study, a hierarchical CoMoS_x chalcogel was synthesized on a nickel foam (NF) through an in situ metathesis reaction and demonstrated excellent activity and stability in the electrocatalytic hydrogen evolution reaction and oxygen evolution reaction in alkaline media. The high catalytic activity could be ascribed to the abundant active sites/defects in the amorphous framework and promotion of activity through cobalt doping. Furthermore, the superhydrophilicity and superaerophobicity of micro‐/nanostructured CoMoS_x/NF promoted mass transfer by facilitating access of electrolytes and ensuring fast release of gas bubbles. By employing CoMoS_x/NF as bifunctional electrocatalysts, the overall water splitting device delivered a current density of 500 mA cm^?2 at a low voltage of 1.89 V and maintained its activity without decay for 100 h.     

Synergistic Assembly of a CoS@NiFe/Ni Foam Heterostructure Electrocatalyst for Efficient Water Oxidation Catalysis at Large Current Densities

Electrochemical water splitting is an ideal pollution‐free path to generate hydrogen at large scale, however, the development of highly catalytic electrocatalysts for the water oxidation reaction at large current densities is still a fundamental challenge. Herein, we report a novel, high‐wettability water‐oxidation electrocatalyst composed of an amorphous NiFe layer and CoS film on commercial nickel foam via a two‐step electrodeposition synthetic path. Benefiting from the strong interactions between the NiFe layer and CoS film, enlarged surface active sites and enhanced wettability, the CoS@NiFe/NF electrode exhibited an outstanding water oxidation performance at 10 mA/cm² with an overpotential of 175 mV in 1 M KOH solution and steadily delivered a current density of 1 A/cm² at merely 330 mV in 30 wt% KOH solution. Even at large densities, the CoS@NiFe/NF hybrids also showed excellent water oxidation stability and corrosion resistance for at least 24 h. Such a synergistic assembling approach to fabricate a CoS@NiFe/NF heterostructure together with excellent OER performance may be a promising strategy for rationally building and designing heterostructural electrocatalysts towards highly efficient water oxidation reaction.     

Two-Dimensional NiIr@N-Doped Carbon Nanocomposites Supported on Ni Foam for Electrocatalytic Overall Water Splitting

Electrochemical water splitting can provide a promising avenue for sustainable hydrogen production. Highly efficient electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are extremely important for the practical application of water splitting technology. Herein, a one-step annealing strategy is reported for the fabrication of a metal–organic framework-derived bifunctional self-supported electrocatalyst, which is composed of two-dimensional N-doped carbon-wrapped Ir-doped Ni nanoparticle composites supported on Ni foam (NiIr@N-C/NF). The resultant NiIr@N-C/NF displays excellent electrocatalytic performance in 1.0 m KOH, with low overpotentials of 32 mV at 10 mA cm⁻² for the HER and 329 mV at 50 mA cm⁻² for the OER. Particularly, the HER-OER bifunctional NiIr@N-C/NF needs only 1.50 V to yield 10 mA cm⁻² for overall water splitting.     

NiSe Nanowire Film Supported on Nickel Foam: An Efficient and Stable 3D Bifunctional Electrode for Full Water Splitting

Active and stable electrocatalysts made from earth‐abundant elements are key to water splitting for hydrogen production through electrolysis. The growth of NiSe nanowire film on nickel foam (NiSe/NF) in situ by hydrothermal treatment of NF using NaHSe as Se source is presented. When used as a 3D oxygen evolution electrode, the NiSe/NF exhibits high activity with an overpotential of 270 mV required to achieve 20 mA cm^?2 and strong durability in 1.0 M KOH, and the NiOOH species formed at the NiSe surface serves as the actual catalytic site. The system is also highly efficient for catalyzing the hydrogen evolution reaction in basic media. This bifunctional electrode enables a high‐performance alkaline water electrolyzer with 10 mA cm^?2 at a cell voltage of 1.63 V.     

Anodic Hydrazine Oxidation Assists Energy‐Efficient Hydrogen Evolution over a Bifunctional Cobalt Perselenide Nanosheet Electrode

Water electrolysis is a promising source of hydrogen; however, technological challenges remain. Intensive efforts have focused on developing highly efficient and earth‐abundant electrocatalysts for water splitting. An effective strategy is proposed, using a bifunctional tubular cobalt perselenide nanosheet electrode, in which the sluggish oxygen evolution reaction is substituted with anodic hydrazine oxidation so as to assist energy‐efficient hydrogen production. Specifically, this electrode produces a current density of 10 mA cm^?2 at ?84 mV for hydrogen evolution and ?17 mV for hydrazine oxidation in 1.0 m KOH and 0.5 m hydrazine electrolyte. An ultralow cell voltage of only 164 mV is required to generate a current density of 10 mA cm^?2 for 14 hours of stable water electrolysis.     

Self-supported FexNi1-xMoO4 with synergistic morphology and composition for efficient overall water splitting at large current density

Developing the high activity, low cost and robust large-current-density-based electrocatalysts is of great significance for the industrial electrolytic water splitting. However, the current range of most reported materials is small, which makes it difficult for them to play their roles in practical applications. Here, a self-supported amorphous Fe_xNi_1-xMoO₄/IF treated with ammonium fluoride (AF_0.1-FNMO/IF) is synthesized by one-step hydrothermal method. With the help of NH₄F, AF_0.1-FNMO/IF exhibits a vertically cross-linked nanosheet with spherical structure. Electrochemical measurement shows that AF_0.1-FNMO/IF affords a large current density ordeal and only need low overpotentials of 289 and 345 mV to reach a current response of 500 mA/cm² for oxygen evolution reaction and hydrogen evolution reaction, respectively, together with long-time stability (both at 500, 1000 and 2000 mA/cm²) in 1.0 mol/L KOH solution. Using it as bifunctional catalyst for overall water splitting, the current densities of 100, 500, 1000 and 1500 mA/cm² are achieved at a cell voltage of 1.71, 1.88, 1.94 and 1.97 V with excellent durability, which is much better than that of most published electrodes. The work provides valuable insight for designing higher activity nickel iron-based molybdate catalysts with large current density.     

Cable-like carbon nanotubes decorated metal-organic framework derived ultrathin CoSe2/CNTs nanosheets for electrocatalytic overall water splitting

The high cost and low reserves of noble metals greatly hinder their practical applications in new energy production and conversion. The exploration of cost-effective alternative electrocatalysts with the ability to drive hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is extremely significant to promote overall water splitting. Herein, ultrathin CoSe₂/CNTs nanocomposites have been synthesized by a facile two-step method, where the ultrathin Co-MOF (metal organic-framework) decorated with cable-like carbon nanotubes (CNTs) (Co-MOF/CNTs) was initially fabricated, and followed a low-temperature selenization process. The ultrathin CoSe₂ nanosheets as well as the superior conductivity of CNTs synergistically resulted in abundant active sites and enhanced conductivity to boost the electrocatalytic activity. The as-prepared CoSe₂/CNTs electrocatalysts exhibited an overpotential of 190 mV and 300 mV vs. reversible hydrogen electrode (RHE) at a current density of 10 mA/cm² for the HER and OER in alkaline solution, respectively, and demonstrated superior durability. Furthermore, the as-prepared bifunctional CoSe₂/CNTs electrocatalysts can act as cathode and anode in an electrolyzer, showing a cell voltage of 1.75 V at 10 mA/cm² for overall water splitting.     

Controlled Synthesis of Cr‐Co0.85Se Nanoarrays for Water Splitting at an Ultralow Cell Voltage of 1.43 V

Water splitting has attracted more and more attention as a promising strategy for the production of clean hydrogen fuel. In this work, a new synthesis strategy was proposed, and Co_0.85Se was synthesized on nickel foam as the main matrix. The doping of appropriate Cr amount into the target of Co_0.85Se and the Cr‐Co_0.85Se resulted in an excellent electrochemical performance. The doping of Cr introduces Cr³⁺ ions which substitute Co²⁺ and Co³⁺ ions in Co_0.85Se, so that the lattice parameters of the main matrix were changed. It is worth noting that the Cr0.15‐Co_0.85Se/NF material exhibits an excellent performance in the oxygen evolution reaction (OER) test. When the current density reaches 50 mA cm^?2 for OER, the overpotential is only 240 mV. For the hydrogen evolution reaction (HER) tests, the overpotential is only 117 mV to drive 10 mA cm^?2 of current density. Moreover, when the Cr0.15‐Co_0.85Se/NF material is used as a two‐electrode device for whole water splitting, the required cell voltage is only 1.43 V to reach a current density of 10 mA cm^?2, which is among the lowest values of the published catalysts up to now. In addition, the Cr0.15‐Co_0.85Se/NF catalyst also exhibits excellent stability during a long period of water splitting. The experimental result demonstrates that the change of the lattice structure has an obvious influence on the electrocatalytic activity of the material. When an external electric field is applied, it facilitates the rapid electron transfer rate and enhances the electrocatalytic performance and stability of the material.     

Controlled Synthesis of Ni-Doped MoS2 Hybrid Electrode for Synergistically Enhanced Water-Splitting Process

The development of high-efficiency, low-cost, and earth-abundant electrocatalysts for overall water splitting remains a challenge. In this work, Ni-modified MoS₂ hybrid catalysts are grown on carbon cloth (Ni-Mo-S@CC) through a one-step hydrothermal treatment. The optimized Ni-Mo-S@CC catalyst shows excellent hydrogen evolution reaction (HER) activity with a low overpotential of 168 mV at a current density of 10 mA cm⁻² in 1.0 m KOH, which is lower than those of Ni-Mo-S@CC (1:1), Ni-Mo-S@CC (3:1), and pure MoS₂. Significantly, the Ni-Mo-S@CC hybrid catalyst also displays outstanding oxygen evolution reaction (OER) activity with a low overpotential of 320 mV at a current density of 10 mA cm⁻², and remarkable long-term stability for 30 h at a constant current density of 10 mA cm⁻². Experimental results and theoretical analysis based on density functional theory demonstrate that the excellent electrocatalytic performance can be attributed mainly to the remarkable conductivity, abundant active sites, and synergistic effect of the Ni-doped MoS₂. This work sheds light on a unique strategy for the design of high-performance and stable electrocatalysts for water-splitting electrolyzers.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Hierarchical NiCo2O4 Hollow Microcuboids as Bifunctional Electrocatalysts for Overall Water‐Splitting

Bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte may improve the efficiency of overall water splitting. Nickel cobaltite (NiCo₂O₄) has been considered a promising electrode material for the OER. However, NiCo₂O₄ that can be used as an electrocatalyst in HER has not been studied yet. Herein, we report self‐assembled hierarchical NiCo₂O₄ hollow microcuboids for overall water splitting including both the HER and OER reactions. The NiCo₂O₄ electrode shows excellent activity toward overall water splitting, with 10 mA cm^?2 water‐splitting current reached by applying just 1.65 V and 20 mA cm^?2 by applying just 1.74 V across the two electrodes. The synthesis of NiCo₂O₄ microflowers confirms the importance of structural features for high‐performance overall water splitting.     

Interface engineering of FeCo LDH@NiCoP nanowire heterostructures for highly efficient and stable overall water splitting

Developing efficient and inexpensive OER electrocatalysts is a challenge for overall water splitting. Herein, the heterostructured FeCo LDH@NiCoP/NF nanowire arrays with high performance were rationally designed and prepared using an interface engineering strategy. Benefitting from the special heterostructure between FeCo LDH and NiCoP, the as-synthesized FeCo LDH@NiCoP/NF electrocatalyst exhibits outstanding OER performance with an exceptionally low overpotential of 206 mV to achieve 20 mA/cm² current density in an alkaline electrolyte. Importantly, a cell constructed using the FeCo LDH@NiCoP/NF electrocatalyst as cathode and anode just needs a voltage of 1.48 V at 10 mA/cm², and shows excellent stability over 80 h. Experimental and theoretical results verified that the introduction of NiCoP efficiently regulates the electronic structure of FeCo LDH, which tremendously boosts the conductivity and intrinsic catalytic activity of FeCo LDH@NiCoP/NF electrocatalyst. The present work provides guidance for the preparation of other efficient and cheap electrocatalytic materials.     

Flower-like NiCo2S4/NiFeP/NF composite material as an effective electrocatalyst with high overall water splitting performance

Rational design and building of high efficiency, secure and inexpensive electrocatalyst is a pressing demand and performance to promote sustainable improvement of hydrogen energy. The bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution response (HER) with high catalytic performance and steadiness in the equal electrolyte are extra treasured and meaningful. Herein, a unique three-dimensional (3D) structure electrocatalyst for NiCo₂S₄ growing on the flower-like NiFeP was designed and synthesized in this study. The results show that the flower-like NiCo₂S₄/NiFeP/NF composite electrocatalyst has large specific surface area, appropriate electrical conductivity, and greater lively websites uncovered in the three-dimensional structure, and affords extraordinary electrocatalytic overall performance for the ordinary water splitting. In alkaline solution, the OER and HER overpotentials of NiCo₂S₄/NiFeP/NF only need 293 mV and 205 mV overpotential to provide the current densities of 100 mA/cm² and 50 mA/cm², respectively. This high electrocatalytic activity exceeds the catalytic activity of most nickel-iron based electrocatalysts for OER and HER process. Accordingly, the optimized NiCo₂S₄/NiFeP/NF sample has higher stability (24 h) at 1.560 and 10 mA/cm², which extensively speeds up the overall water splitting process. In view of the above performance, this work offers a fine approach for the further improvement of low fee and excessive effectivity electrocatalyst.     

Manganese-Modulated Cobalt-Based Layered Double Hydroxide Grown on Nickel Foam with 1D–2D–3D Heterostructure for Highly Efficient Oxygen Evolution Reaction and Urea Oxidation Reaction

Hydrogen production by energy-efficient water electrolysis is a green avenue for the development of contemporary society. However, the oxygen evolution reaction (OER) and the urea oxidation reaction (UOR) occurring at the anode are impeded by the sluggish reaction kinetics during the water-splitting process. Consequently, it is promising to develop bifunctional anodic electrocatalysts consisting of nonprecious metals. Herein, a bifunctional CoMn layered double hydroxide (LDH) was grown on nickel foam (NF) with a 1D–2D–3D hierarchical structure for efficient OER and UOR performance in alkaline solution. Owing to the significant synergistic effect of Mn doping and heterostructure engineering, the obtained Co₁Mn₁ LDH/NF exhibits satisfactory OER activity with a low potential of 1.515 V to attain 10 mA cm⁻². Besides, the potential of the Co₁Mn₁ LDH/NF catalyst for UOR at the same current density is only 1.326 V, which is much lower than those of its counterparts and most reported electrocatalysts. An urea electrolytic cell with a Co₁Mn₁ LDH/NF anode and a Pt–C/NF cathode was established, and a low cell voltage of 1.354 V at 10 mA cm⁻² was acquired. The optimized strategy may result in promising candidates for developing a new generation of bifunctional electrocatalysts for clean energy production.     

Hollow Porous MnFe2O4 Sphere Grown on Elm-Money-Derived Biochar towards Energy-Saving Full Water Electrolysis

The development of inexpensive and efficient bifunctional electrocatalysts is significant for widespread practical applications of overall water splitting technology. Herein, a one-pot solvothermal method is used to prepare hollow porous MnFe₂O₄ spheres, which are grown on natural-abundant elm-money-derived biochar material to construct MnFe₂O₄/BC composite. When the overpotential is 156 mV for both the oxygen evolution reaction and the hydrogen evolution reaction, the current density reaches up to 10 mA cm⁻², and its duration is 10 h. At 1.51 V, the overall water decomposition current density of 10 mA cm⁻² can be obtained in 1 m KOH. This work proves that elm-money-derived biochar is a valid substrate for growing hollow porous spheres. MnFe₂O₄/BC give a promising general strategy for preparing the effective and stable bifunctional catalysis that can be expand to multiple transition metal oxide.     

ZnO-Templated Selenized and Phosphorized Cobalt-Nickel Oxide Microcubes as Rapid Alkaline Water Oxidation Electrocatalysts

Oxygen electrocatalysis is of remarkable significance for electrochemical energy storage and conversion technologies, together with fuel cells, metal-air batteries, and water splitting devices. Substituting noble metal-based electrocatalysts by decidedly effective and low-cost metal-based oxygen electrocatalysts is imperative for the commercial application of these technologies. Herein, a novel strategy is presented to fabricate selenized and phosphorized porous cobalt-nickel oxide microcubes by using a sacrificial ZnO spherical template and the resulting microcubes are employed as an oxygen evolution reaction (OER) electrocatalyst. The selenized samples manifest desirable and robust OER performance, with comparable overpotential at 10 mA cm⁻² (312 mV) as RuO₂ (308 mV) and better activity when the current reaches 13.7 mA cm⁻². The phosphorized samples exhibit core–shell structure with low-crystalline oxides inside amorphous phosphides, which ensures superior activity than RuO₂ with the same overpotential (at 10 mA cm⁻²) yet lower Tafel slope. Such a surface doping method possibly will provide inspiration for engineering electrocatalysts applied in water oxidation.     

Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications

A core‐shell structure with CuO core and carbon quantum dots (CQDs) and carbon hollow nanospheres (CHNS) shell was prepared through facile in‐situ hydrothermal process. The composite was used for non‐enzymatic hydrogen peroxide sensing and electrochemical overall water splitting. The core‐shell structure was established from the transmission electron microscopy image analysis. Raman and UV‐Vis spectroscopy analysis confirmed the interaction between CuO and CQDs. The electrochemical studies showed the limit of detection and sensitivity of the prepared composite as 2.4 nM and 56.72 μA μM^?1 cm^?2, respectively. The core‐shell structure facilitated better charge transportation which in turn exhibited elevated electro‐catalysis towards hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting. The overpotential of 159 mV was required to achieve 10 mA cm^?2 current density for HER and an overpotential of 322 mV was required to achieve 10 mA cm^?2 current density for OER in 1.0 M KOH. A two‐electrode system was constructed for overall water splitting reaction, which showed 10 and 50 mA cm^?2 current density at 1.83 and 1.96 V, respectively. The prepared CuO@CQDs@CHNS catalyst demonstrated excellent robustness in HER and OER catalyzing condition along with overall water splitting reaction. Therefore, the CuO@CQDs@CHNS could be considered as promising electro‐catalyst for H₂O₂ sensing, HER, OER and overall water splitting.     

Nickel-iron borate coated nickel-iron boride hybrid for highly stable and active oxygen evolution electrocatalysis

The development of efficient and cost-effective electrocatalysts toward anodic oxygen evolution reaction (OER) is crucial for the commercial application of electrochemical water splitting. As the most promising electrocatalysts, the OER performances of nickel-iron-based materials can be further improved by introducing metalloid elements to modify their electron structures. Herein, we developed an efficient hybrid electrocatalyst with nickel-iron boride (NiFeB) as core and amorphous nickel-iron borate (NiFeB_i) as shell (NiFeB@NiFeB_i) via a simple aqueous reduction. The obtained NiFeB@NiFeB_i exhibits a small overpotential of 237 mV at 10 mA/cm² and Tafel slope of 57.65 mV/dec in 1.0 mol/L KOH, outperforming most of the documented precious-metal-free based electrocatalysts. Benefiting from the in situ formed amorphous NiFeBi layer, it shows excellent stability toward the oxygen evolution reaction (OER). These findings might provide a new way to design advanced precious-metal-free electrocatalysts for OER and the application of electrochemical water splitting.     

Amorphous Co-P Film: an Efficient Electrocatalyst for Hydrogen Evolution Reaction in Alkaline Seawater

Seawater electrolysis is considered an attractive alternative to conventional freshwater electrolysis for hydrogen production due to the abundance of seawater in nature. For this reason, efficient electrocatalysts for hydrogen evolution reaction (HER) in alkaline seawater are highly desired. In this study, we report an amorphous Co−P alloy on nickel foam (Co−P/NF) that behaves as an efficient and stable HER electrocatalyst for alkaline seawater electrolysis. The Co−P/NF presents high catalytic performance for HER, requiring a low overpotential of 213 mV to drive a current density of 100 mA cm⁻² and a Tafel slope of 120.2 mV dec⁻¹ in alkaline seawater. Furthermore, it shows remarkable electrochemical and structural stability in alkaline seawater.     

Synchronous Electrocatalytic Design of Architectural and Electronic Structure Based on Bifunctional LDH-Co3O4/NF toward Water Splitting

The rational design of highly efficient bifunctional electrocatalysts for water splitting is extremely urgent for application in sustainable energy conversion processes to alleviate the energy crisis and environmental pollution. In this work, through simple deposition of layered double hydroxides (LDH) on Co₃O₄/NF (NF=nickel foam) nanosheets arrays, hierarchical Co³⁺-rich materials based on LDH-Co₃O₄/NF are prepared as highly active and stable electrocatalysts for water splitting. The NiFe-LDH-Co₃O₄/NF demonstrates excellent electrochemical activity with an overpotential of 214 mV for the OER and an overpotential of 162 mV for the HER at 10 mA cm⁻². Such a performance is attributed to the optimized electronic states with a high concentration of Co³⁺, which improves the intrinsic activity, and the sheet-on-sheet hierarchical structure, which increases the number of active sites. The unique synchronous design of both the architectural and electronic structure of nanomaterials can simultaneously accelerate the reaction kinetics and provide a more convenient charge transfer path. Therefore, the strategy reported herein may open a new pathway for the design of excellent electrocatalysts for water splitting.