Spectrophotometric Determination of Manganese with 4(5)-Imidazolealdoxime (Imalox)

Abstract

A method is described for the spectrophotometric determination of manganese by means of its complex with 4(5)-imidazolealdoxime, IMALOX, formed in alkaline medium. The colour system has its absorption maximum at 350 nm and obeys Beer's law over the range 0.8–8.0 μg of Mn per ml. The optimum range is 1–5 μg m^?1. The molar absorptivity is 7850 1 mol^?1 cm^?1. Relatively few ions interfere, and these can be masked with cyanide, tartrate and NTA. The experimental results have been critically analyzed and a comparison with the main spectrophotometric reagents for manganese is presented.     

Studies on the adsorption of nitrogen dioxide onto manganese dioxide-coated quartz piezoelectric crystals

A technique for obtaining thin; evenly distributed manganese dioxide coatings by melting manganese nitrate is outlined. Responses of an AT-cut quartz piezoelectric crystal coated with manganese dioxide to nitrogen dioxide (12.5-10 000 μl 1^?1) over a range of humidities (400–4,800 μ1 l^?1 water) and temperatures (20–35 °C) are given. The response of the simulated product manganese nitrate, over the same range of humidities, is evaluated in relationship to real product formation. The approach may be applicable to other metal salt/metal oxide systems. The detection limit is 7 μl^?1 nitrogen dioxide.     

Semiautomatic indirect titration of alkaline-earth ions with catalytic endpoint indication

A semiautomatic spectrophotometric method of endpoint indication for indirect catalytic titrations of microamounts of alkaline-earth ions is described. The manganese(II)-catalyzed autoxidation of 1,4-dihydroxyphthalimide dithiosemicarbazone is used as indicator reaction. Calcium and magnesium (10–150 μg), strontium (20–250 μg), and barium (20–450 μg) can be determined by adding a known excess of EDTA to the sample solution and back-titrating the unconsumed inhibitor agent with standard manganese(II) solution. This catalytic method was applied to determine the total concentration in calcium and magnesium (total hardness) in natural waters and milk. The method is fast, accurate (1–3%), precise (0.2–0.8%, relative standard deviation), and specially useful for the determination of microamounts where metallochromic indicator are ineffective (for concentrations ranges below 10^?4M).     

Amperometric sensor for L-ascorbic acid determination based on MnO2 bulk modified screen printed electrode

A simple biosensor constructed by bulk-modification of carbon ink with manganese dioxide as a mediator was investigated for its ability to serve as amperometric detector for L-ascorbic acid in hydrodynamic mode. The sensor could be operated at pH 5.0 (0.05 M phosphate buffer) and exhibited excellent reproducibility and stability. Optimization of measurement parameters such as applied working potential and pH value were studied in detail. The screen printed electrode exhibited a linear amperometric increase with the concentration of ¶L-ascorbic acid from 50 mg L^–1 to 250 mg L^–1 and gave a (LOD = 3σ) detection limit of 0.2 mg L^–1 (1.172 μmol L^–1). The manganese dioxide modified screen printed electrode shows long term stability.     

Extraction and Spectrophotometric Determination of Manganese(VII) with N1-Hydroxy-N1,N2-Diphenylbenzamidine

Abstract

Spectrophotometric determination of manganese(VII) at 614 nm after its extraction with N¹ -hydroxy-N¹,N²-diphenylbenzamidine into amyl alcohol at pH 7–8 is described. Beer's law was obeyed for 0.1–10 μg ml^?1 Mn(VII). The effects of experimental variables and of several diverse ions on the determination of manganese(VII) have been studied. The method has been applied to the determination of manganese in steels and in water extracts of a commercial tea and is found to be simple, precise and highly selective.     

Determination of manganese with triethanolamine and o-tolidine by conventional and long-path photometry

A very sensitive method for the spectrophotometric determination of manganese is reported. To the sample is added triethanolamine (TEA) and sodium hydroxide to give a pH above 11; after atmospheric oxidation of manganese(II) to the green manganese(III)—TEA complex, sodium pyrophosphate is added and the solution is acidified. Manganese(III) thus forms a complex with pyrophosphate. Then o-tolidine is added and is oxidized in a 2e step to the intensely yellow quinonediimine, while manganese(III) is reduced to manganese(II). The absorbance is measured at 440 nm. The calibration curve is linear up to 1.6 μg Mn ml^-1 in the final solution; the limit of determination is 0.2 μg Mn ml^-1. For the 20-cm path cell, the respective data are 45 ng Mn ml^-1 and 2 ng Mn ml^-1. The only severe interferences are strong oxidants like dichromate or cerium(IV), which are readily reduced with sulfurous acid. Vanadium in amounts up to 2–3 times that of manganese can be dealt with by an appropriate blank solution; larger amounts of vanadium must be removed e.g. by a cupferron extraction.     

The trace determination of some heavy metals in waters by flow-injection spectrophotometry and potentiometry

Three automated flow-injection systems are proposed for the determination of traces of manganese(II), lead and copper(II) in waters. The first system utilizes the catalytic effect of manganese(II) on the oxidation of N,N-diethylaniline by potassium periodate at pH 6.86–7.10 (30°C) and is used for spectrophotometric determination at 475 nm in the range 0.02–1.00 μg1^?1; the system involves reagent injection and stopped flow. The determination of lead in the range 0.7–100 μg1^?1 is based on spectrophotometric detection of the lead 4/(2-pyridylazo)resorcinol complex at 525 nm after on-line preconcentration of the sample (5–50 ml) on a minicolumn filled with Chelex-100 or Dowex 1-X8 resin. A potentiometric flow-injection system with a copper ion-selective electrode is applied for the determination of 0.5–1000 μg 1^?1 copper(II) after on-line preconcentration of 50–500 ml of sample on Chelex-100 resin. The procedures are tested on synthetic and real water samples, including sea water and waste-waters.     

Trip-Multiplett-Übergänge und Resonanz-Raman-Spektren von Halogeno-2,3-naphthalocyaninato(2–)mangan(III) und Vergleich mit Halogenophthalocyaninato(2–)mangan(III)

Trip-Multiplet Transitions and Resonance Raman Spectra of Halo-2,3-naphthalocyaninato(2–)manganese(III) and Comparison with Halophthalocyaninato(2–)manganese(III) Dehydrated manganese chloride and bromide reacts with 2,3-dicyanonaphthalene in ethylene glycol yielding green, scarcely soluble halo-2,3-naphthalocyaninato(2–)manganese(III), [Mn(X)nc^2–] (X = Cl, Br). The magnetic moment (μ_eff £ 5.3 μ_B at 300 K) confirms the electronic high-spin d⁴ ground-state of penta-coordinated Mn^III. The electronic absorption spectra show (in cm^–1) the typical B (∼ 11200), Q (20000–28000), N (34600) and L region (39600). Additional bands at 5300/7200 cm^–1 and 16200/17600 cm^–1 are attributed to spin-allowed trip-quintet transitions (TQ1, TQ2). The Mn–X stretching vibration is at 283 cm^–1 (X = Cl) and 223 cm^–1 (X = Br), respectively; its intensity is selectively enhanced by coincidence of the excitation frequency of the resonance Raman spectra with TQ2. The spectroscopic properties are compared to those of the structurally related Mn^III phthalocyaninates.     

Spectrophotometric determination of manganese utilizing metal ion substitution in the cadmium-α,β,-γ,δ -tetrakis(4-carboxyphenyl)porphine complex

Manganese(II) reacts quickly with α, β, γ, δ-tetrakis(4-carboxyphenyl)porphine [T(4-CP)P] at room temperature by metal substitution with a cadmium—T(4-CP)P complex in weakly alkaline medium containing imidazole. Oxidation by dissolved oxygen gives a manganese(III) complex having the Soret band at 469 nm. This forms the basis of a spectrophotometric method for the determination of manganese in the range 25–560 μg l^-1. The sensitivity (0.001 absorbance) is 0.56 ng cm^-2. Interferences of 17 cations and 8 anions were examined; only Cu²⁺, Co²⁺, Cr³⁺ and Pb²⁺ interfered markedly. The method was successfully applied to the determination of manganese in tea leaves.     

Atomic absorption spectrometric determination of copper in calcium carbonate scale and carbonate rocks by direct atomization of solid samples

Powdered samples (1 mg) are mixed with 1 mg of powdered graphite and copper is determined by atomic absorption spectrometry in a miniature graphite cup placed in a graphite crucible. Optimum conditions were drying at 200 °C (30 s), ashing at 900 °C (30 s), atomizing at 2700 °C (15 s) and cleaning at 2800 °C (10 s). Samples were powdered to 1–10 μm particle size. Magnesium, manganese and iron did not interfere. The effect of calcium carbonate was eliminated by the graphite addition. Results for copper (0.5–5 μg g^?1) in the scale and rocks agreed well with values obtained for dissolved samples. Relative standard deviations (n=10) were 4.9% for 1.2 μg g^?1 copper and 14.8% for 0.577 μg g^?1.     

EQCM study of redox properties of PEDOT/MnO<Subscript>2</Subscript> composite films in aqueous electrolytes

Electrochemical behavior of poly-3,4-ethylenedioxythiophene composites with manganese dioxide (PEDOT/MnO₂) has been investigated by cyclic voltammetry and electrochemical quartz crystal microbalance at various component ratios and in different electrolyte solutions. The electrochemical formation of PEDOT film on the electrode surface and PEDOT/MnO₂ composite film during the electrochemical deposition of manganese dioxide into the polymer matrix was gravimetrically monitored. The mass of manganese dioxide deposited into PEDOT at different time of electrodeposition and apparent molar mass values of species involved into mass transfer during redox cycling of PEDOT/MnO₂ composites were evaluated. It was found that during the redox cycling of PEDOT/MnO₂ composite films with various MnO₂ content, the oppositely directed fluxes of counterions (anions and cations) occur, resulting in a change of the slope of linear parts of the Δf–E plots with changing the mass fraction of MnO₂ in the composite film.Rectangular shape of cyclic voltammograms of PEDOT/MnO₂ composites with different loadings of manganese dioxide was observed, which is characteristic of the pseudocapacitive behavior of the composite material. Specific capacity values of PEDOT/MnO₂ composites obtained from cyclic voltammograms were about 169 F g^?1. The specific capacity, related to the contribution of manganese dioxide component, was about 240 F g^?1.     

A multiresidue method with mobile on-site sampling based on SPE for ultratrace analysis of plant protectants in environmental waters

A new multiclass/multiresidue method for monitoring plant protectant residues in raw- and drinking waters with on-site sampling using a mobile, self-contained sampling unit based on SPE was developed and validated. 38 active compounds with widely varying chemical and physicochemical properties (acid-base properties, polarities, vapor pressures, solubilities) are measured from just one sample and work-up. 100 mL water, acidified with acetic acid, are drawn through a cartridge filled with Amberchrom resins by means of a calibrated 100 mL syringe driven by servo motors, control circuit and rechargeable battery. Volumetric flow is high, quantitative extraction of acidic, neutral and weak basic substances is accomplished in a few minutes and loaded cartridges are transported into the laboratory. Further work-up, i.e. elution, drying, concentration and solvent change, is designed strictly non-selectively and produces 250 μL of an “extract”, which is the starting point of two GC measurement lines, GC-NPD and GC-ECD. Chlorinated herbicide acids are derivatised into perfluorinated benzyl esters employing reaction conditions so smooth that the organochlorine hydrocarbons are not destroyed at all and both substance classes can be chromatographed in one GC run. ECD-chromatograms from derivatised solutions are rather complex, therefore the flow is split after injection onto two columns with different polarities and two EC-detectors in order to resolve all analytes and matrix interferents. Short-chain carbonic acids added to the water prior to preconcentration are adsorbed on the hydrophobic surface in a reversible process and impart the Amberchrom resins with a partially hydrophilic character. Method performance was ascertained using tap water fortified at the 0.2 μg L^–1 level: Mean recoveries were between 70 and 115% and method detection limits (MDLs) below 0.08 μg L^–1. Waters from different sources did not affect the recoveries, loaded cartridges are stable for two weeks’ storage when cooled.     

Catalytic Electron‐Transfer Oxygenation of Substrates with Water as an Oxygen Source Using Manganese Porphyrins

Manganese(V)–oxo–porphyrins are produced by the electron‐transfer oxidation of manganese–porphyrins with tris(2,2′‐bipyridine)ruthenium(III) ([Ru(bpy)₃]³⁺; 2 equiv) in acetonitrile (CH₃CN) containing water. The rate constants of the electron‐transfer oxidation of manganese–porphyrins have been determined and evaluated in light of the Marcus theory of electron transfer. Addition of [Ru(bpy)₃]³⁺ to a solution of olefins (styrene and cyclohexene) in CH₃CN containing water in the presence of a catalytic amount of manganese–porphyrins afforded epoxides, diols, and aldehydes efficiently. Epoxides were converted to the corresponding diols by hydrolysis, and were further oxidized to the corresponding aldehydes. The turnover numbers vary significantly depending on the type of manganese–porphyrin used owing to the difference in their oxidation potentials and the steric bulkiness of the ligand. Ethylbenzene was also oxidized to 1‐phenylethanol using manganese–porphyrins as electron‐transfer catalysts. The oxygen source in the substrate oxygenation was confirmed to be water by using ¹⁸O‐labeled water. The rate constant of the reaction of the manganese(V)–oxo species with cyclohexene was determined directly under single‐turnover conditions by monitoring the increase in absorbance attributable to the manganese(III) species produced in the reaction with cyclohexene. It has been shown that the rate‐determining step in the catalytic electron‐transfer oxygenation of cyclohexene is electron transfer from [Ru(bpy)₃]³⁺ to the manganese–porphyrins.     

Direct determination of manganese in microgram amounts of pancreatic tissue by electrothermal atomic absorption spectrometry

Manganese is determined by the direct insertion of freeze-dried biological samples (1–15 μg) or by injection of 2-μl samples of perifusion medium into the graphite furnace. At the most sensitive wavelength (279.5 nm), down to 0.2 pmol of manganese can be measured in the perifusion medium as well as the endogenous manganese in the endocrine and exocrine parts of the pancreas. The latter values were 0.08 ± 0.01 and 0.16 ± 0.01 mmol Mn kg^-1 (dry wt.), respectively. A less sensitive wavelength (403.1 nm) is employed for measuring the larger amounts obtained after incubating the specimens in the presence of manganese(II).     

An improved spectrophotometric determination of manganese(II) with 1-(2-quinolylazo)-2,4,5-trihydroxybenzene with applications to medicinal plants and chemical reagents

The effects of organic solvent, time and temperature on the colour-forming reaction are described. For nine solvents tested, the molar absorptivities were in the range 2.0×10⁴?6.7×10⁴ mol^?1 cm^?1; best sensitivity was obtained with a 1:1 water/2-propanol solution after a standing time of 35 min; temperature should be controlled to ±2°C. Beer's law was obeyed for 0–1.45 μg ml^?1 Mn(II). The improved method was applied to determinations of manganese(II) in various herbs and chemical reagents; the values found were in the range 5.4–48.4 μg g^?1 in herbs, and 0.001-0.012% (w/w) in reagents.     

Radio-isotope neutron activation analysis for vanadium,manganese and tungsten in alloy steels

An instrumental neutron activation method for V, Mn and W in alloy steels with a ²⁴¹ Am/Be isotopic neutron source is described. The samples were irradiated to induce the nuclear reactions ⁵¹V(n, γ) ⁵²V, ⁵⁵Mn(n, γ)⁵⁶Mn, and ¹⁸⁶W(n, γ)¹⁸⁷W. The activities were measured with a NaI(TI) detector. Interferences on the measured photopeaks were shown to be negligible by measuring the half-lives of ⁶²V, ⁵⁶Mn and ¹⁸⁷W.These thre elementes were determined in the range 1.5–12.9% in special steels; manganese in the range 0.5–1.6% was measured in cast irons. Calibration was done by comparison with results from wet chemistry and x-ray fluorescence spectrometry. The processing times for the vanadium, manganese and tungsten determinations were 11 min, 3 h and 26.3 h, respectively, but these were reduced greatly by intoruding a scheme wherein six samples were simultaneously irradiated and the ⁵⁶Mn and ¹⁸⁷W nuclides were measured sequentially for a series of 66 samples. The average processing time was reduced to 45 min for tungsten with a precision of 4.0% and accuracy of 3.4% and 22.8 min for manganese with a precision of 3.8% and accuracy of 3.1%.     

Simultaneous First-Derivative Spectrophotometric Determination of Nickel and Manganese Complexes with 2-(2-Pyridylmethyleneamino)phenol

Abstract

A method is proposed for the simultaneous determination of nickel and manganese by first-derivative spectrophotometry based on their reactions with 2-(2-pyridylmethyleneamino)phenol (PMAP) Schiff base. The method allows the determination of Ni and Mn in the concentration range 0.3–3.0 μg ml^?1 in mixtures with their ten-fold concentration ratio. The method has been applied for Ni and Mn determination in bronzes. To optimize the experimental conditions for spectrophotometric determination of Mn with PMAP stability constants at different pH values have been determined. A critical evaluation of the proposed method was performed by statistical analysis of the experimental data.     

Preconcentration by coprecipitation of submicrogram amounts of copper and manganese with 8-quinolinol and direct electrothermal atomic absorption spectrometry of the precipitates

Copper and manganese in water samples at levels at or below the μg kg^?1 level are determined by graphite-furnace atomic absorption spectrometry, after coprecipitation with 8-quinolinol followed by direct measurements on precipitate in a specially-designed furnace. The two metal ions are coprecipitated quantitatively in the pH range 7.0–8.5 with magnesium ions as carrier. The detection limits for copper and manganese are 12 and 14 ng kg^?1, respectively, for 300-ml portions of water samples analyzed.     

Kinetic spectrophotometric determination of trace manganese (II) with dahlia violet in nonionic microemulsion medium

A new catalytic kinetic spectrophotometric method has been developed for the determination of trace amount of manganese (II) in nonionic microemulsion medium. The method is based on the catalytic effect of manganese (II) on the oxidation of dahlia violet by potassium periodate with nitrilotriacetic acid as an activitor in the presence of nonionic microemulsion. Under the optimum conditions, the calibration graph is linear in the range of 0.0004-0.0056 μg ml⁻¹ of manganese (II) at 580 nm. The detection limit achieved is 3.75×10⁻⁵ μg ml⁻¹. Manganese (II) in foodstuff samples was determined with satisfactory results.     

A New Spectrophotometric Method for the Determination of Maneb in Commercial Formulations

Abstract

A new rapid, selective and sensitive method has been developed for the determination of maneb using pyrocatechol-violet(PV) as chelating reagent in the pH range of 7.5–11.0 in the presence of CTAB producing a complex which shows maximum absorption at 640 nm. Working range of the method is 0.2–3.0 μg ml^?1 maneb (manganese ethylenebisdithiocarbamate). The molar absorptivity of the color system is 79600 1 mol^?1 cm^?1 and Sandell's sensitivity is 0.0033 μg cm^?2. The reproducibility of the method has been checked by the 10 replicate analysis of 15 μg of maneb in 10 ml of solution. The method is quite sensitive and has been applied for the determination of maneb in various commercial samples, crops, grains and synthetic samples.