Highly efficient and photostable photosensitizer based on BODIPY chromophore

Photosensitizers are reagents that produce reactive oxygen species upon light illumination and are commonly used to study oxidative stress or for photodynamic therapy. There are many available photosensitizers, but most have limitations, such as low photostability, structural instability, or a limited usable range of solvent conditions. Here, we describe a novel photosensitizer scaffold (2I-BDP) based on the unique characteristics of the BODIPY chromophore (i.e., high extinction coefficient, high photostability, and insensitivity to solvent environment). 2I-BDP shows stronger near-infrared singlet oxygen luminescence emission and higher photostability than the well-known photosensitizer, Rose Bengal. Unlike other photosensitizers, this scaffold is widely applicable under various conditions, including lipophilic and aqueous environments. HeLa cells loaded with 2I-BDP could be photosensitized by light illumination, demonstrating that 2I-BDP is potentially useful as a reagent for cell photosensitization, oxidative stress studies, or PDT.     

Highly emissive conjugated polymer excimers

Conjugated polymers often display a decrease of fluorescence efficiency upon aggregation due in large part to enhanced interpolymer interactions that produce weakly emissive species generally described as having excimer-like character. We have found that poly(phenylene ethynylene)s with fused pendant [2.2.2] ring structures having alkene bridges substituted with two ester groups function to give highly emissive, broad, and red-shifted emission spectra in the solid state. To best understand the origin of this new solid-state emissive species, we have performed photophysical studies of a series of different materials in solution, spin-coated thin films, solid solutions, and Langmuir films. We conclude that the new, red-shifted, emissive species originate from excimers produced by interchain interactions being mediated by the particular [2.2.2] ring system employed. The ability to design structures that can reliably produce highly emissive conjugated polymer excimers offers new opportunities in the emission tailoring of electroluminescence and sensory devices.     

Polyfluorene based conjugated polymer nanoparticles for two-photon live cell imaging

Two-photon excitation microscopy (2PEM) has been known as a noninvasive and powerful bio-imaging tool for studying living cells, intact tissues and living animals because of their unique advantages such as localized excitation, deep tissue penetration as well as less photo-damage. However, the major limitations that hinder its practical applications in biological systems are low two-photon absorption cross sections of conventional fluorescence probes. Conjugated polymer nanoparticles (CPNs) consisting of highly fluorescent conjugated polymers are promising fluorescent probes for 2PEM due to their unique advantages including large two-photon absorption cross sections, high fluorescence quantum yield, good photo-stability and biocompatibility, facile chemical synthesis, tunable optical properties as well as versatile surface modifications. This account summarizes the recent efforts of our group on development of novel polyfluorene based CPNs as 2PEM contrast agents for live cell imaging.     

Design of conjugated microporous polymer nanotubes for efficient benzene molecular adsorptions

Single‐walled conjugated microporous polymer (CMP) nanotubes containing alternative phenylene and ethynylene units were described computationally for the first time in this work. The electronic structures and adsorption properties were studied by the density‐functional tight‐binding method augmented with a van der Waals dispersion term. Our calculations show that the morphology of CMP influences the benzene‐adsorption performance significantly. The tubes show smaller binding energies to benzene molecule than the film counterparts, consistent with the observation of low adsorption capacities of tubular materials in our experiments. Enlarging the linker or adding substituents in the node can both reduce the tube's band gap. The introduction of  OH or  NH₂ substituents in the tube node increases the binding strength between the adsorbent and the adsorbate, which is energetically favorable to enhance the adsorption capacity. Our results are expected to provide theoretical insights into the rational design of novel CMP nanotubes with improved adsorption capacities for organics.     

Highly monodisperse conjugated polymer particles synthesized with drop-based microfluidics

A facile method for preparing highly monodisperse, sub-micrometre conjugated polymer particles is reported. The particles are prepared through emulsification of a conjugated polymer solution on a microfluidic chip followed by solvent evaporation. The particle size is tuned between 150 nm to 2 μm, by controlling the polymer concentration.     

Multimodal imaging probes based on Gd-DOTA conjugated quantum dot nanomicelles

Recently, multimodal nanoparticles integrating dual- or tri-imaging modalities into a single hybrid nanosystem have attracted plenty of attention in biomedical research. Here, we report the fabrication of two types of multimodal micelle-encapsulated nanoparticles, which were systematically characterized and thoroughly evaluated in terms of their imaging potential and biocompatibility. Optical and magnetic resonance (MR) imaging probes were integrated by conjugating DOTA-gadolinium (Gd) derivative to quantum dot based nanomicelles. Two amphiphilic block copolymer micelles, amine-terminated mPEG-phospholipid and amine-modified Pluronic F127, were chosen as the capping agents because of their excellent biocompatibility and ability to prevent opsonization and prolong circulation time in vivo. Owing to their different hydrophobic-hydrophilic structure, the micellar aggregates exhibited different sizes and protection of core QDs. This work revealed the differences between these nanomicelles in terms of the stability over a wide range of pH, along with their cytotoxicity and the capacity for chelating gadolinium, thus providing a useful guideline for tailor-making multimodal nanoparticles for specific biomedical applications.     

A compact and highly fluorescent orange-emitting polymer dot for specific subcellular imaging

We demonstrate a new compact CN-PPV dot, which emits in the orange wavelength range with high brightness. The small particle size, high brightness, and the ability to highly specifically target subcellular structures make the CN-PPV dots promising probes for biological imaging and bioanalytical applications.     

New carbazole-substituted siloles for the fabrication of efficient non-doped OLEDs

New aggregation-induced emission molecules of carbazole-substituted siloles are prepared, based on which efficient non-doped OLEDs are fabricated, offering high external quantum efficiencies of up to 5.63%.     

Readily synthesised arylamino fumaronitrile for non-doped red organic light-emitting diodes

Bright (maximum 10034 cd m(-2), 455 cd m(-2) at 20 mA cm(-2)) and efficient (maximum 2.4% at 4 mA cm(-2)) red (lambda(max)el 634-636 nm) organic light-emitting diodes employ arylamino-substituted fumaronitrile as the novel host emitter, which is readily prepared and easily purified.     

Tuning the energy gap of conjugated polymer zwitterions for efficient interlayers and solar cells

Narrow band gap conjugated polymer zwitterions (CPZs) were synthesized by Suzuki polymerization and characterized to understand their electronic properties and utility as cathode modification layers in solar cells. The polymers were prepared from diketopyrrolopyrrole (DPP) and iso-indigo monomers containing sulfobetaine (SB) pendant groups, benefiting from an ion-rich aqueous phase in the polymerizations. UV–vis absorption spectroscopy revealed the optical energy gap value for the CPZs, ranging from 1.7 to 1.2 eV. Ultraviolet photoelectron spectroscopy of the CPZs as thin layers on Ag metal showed that the pendent zwitterions impart an interfacial dipole (Δ) to the metal and a work function reduction of ∼0.9 eV. OPVs fabricated using a conventional bulk heterojunction (BHJ) device architecture of ITO/PEDOT:PSS/(PTB7:PC₇₁BM)/CPZ/Ag led to dramatic improvements in power conversion efficiency (PCE) values relative to devices having bare Ag cathodes (PCE < 2% for bare Ag vs. 6.7–7.7% for CPZ/Ag). The benzothiadiazole (BT)/DPP polymer denoted as PT₂BTDPPSB gave an optimal PCE of 7.7% in a conventional BHJ OPV device architecture fabricated on a Ag cathode. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 327–336     

Solid-state highly fluorescent diphenylaminospirobifluorenylfumaronitrile red emitters for non-doped organic light-emitting diodes

Bright (maximum 11,000 cd m(-2) and 500 cd m(-2) at 20 mA cm(-2)) and efficient (maximum external quantum efficiency of 3.1% at 1 mA cm(-2)) red (CIE, x = 0.66, y = 0.34) organic light-emitting diodes (OLEDs) employ arylaminospirobifluorene-substituted fumaronitriles as the novel non-dopant red emitter.     

Development of a new conjugated polymer containing dialkoxynaphthalene for efficient polymer solar cells and organic thin film transistors

A new semiconducting polymer, poly((5,5‐E‐α‐((2‐thienyl)methylene)‐2‐thiopheneacetonitrile)‐alt‐2,6‐[(1,5‐didecyloxy)naphthalene])) (PBTADN), an alternating copolymer of 2,3‐bis‐(thiophene‐2‐yl)‐acrylronitrile and didecyloxy naphthalene, is synthesized and used as an active material for organic thin film transistors (OTFTs) and organic solar cells. The incorporation of 2,3‐bis‐(thiophene‐2‐yl)‐acrylronitrile as an electron deficient group and didecyloxy naphthalene as an electron rich group resulted in a relatively low bandgap, high charge carrier mobility, and finally good photovoltaic performances of PBTADN solar cells. Because of the excellent miscibility of PBTADN and PC₇₁BM, as confirmed by Grazing Incident X‐ray Scattering (GIXS) measurements and Transmission Electron Microscopy (TEM), homogeneous film morphology was achieved. The maximum power conversion efficiency of the PBTADN:PC₇₁BM solar cell reached 2.9% with a V_oc of 0.88 V, a short circuit current density (J_sc) of 5.6 mA/cm², and a fill factor of 59.1%. The solution processed thin film transistor with PBTADN revealed a highest saturation mobility of 0.025 cm²/Vs with an on/off ratio of 10⁴. The molecular weight dependence of the morphology, charge carrier mobility, and finally the photovoltaic performances were also studied and it was found that high molecular weight PBTADN has better self assembly characteristics, showing enhanced performance. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Click assembly of dye-functionalized octasilsesquioxanes for highly efficient and photostable photonic systems

New hybrid organic–inorganic dyes based on an azide‐functionalized cubic octasilsesquioxane (POSS) as the inorganic part and a 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BDP) chromophore as the organic component have been synthesized by copper(I)‐catalyzed 1,3‐dipolar cycloaddition of azides to alkynes. We have studied the effects of the linkage group of BDP to the POSS unit and the degree of functionalization of this inorganic core on the ensuing optical properties by comparison with model dyes. The high fluorescence of the BDP dye is preserved in spite of the linked chain at its meso position, even after attaching one BDP moiety to the POSS core. The laser action of the new dyes has been analyzed under transversal pumping at 532 nm in both the liquid phase and when incorporated into solid polymeric matrices. The monosubstituted new hybrid dye exhibits high lasing efficiency of up to 56 % with high photostability, with its laser output remaining at the initial value after 4×10⁵ pump pulses in the same position of the sample at a repetition rate of 30 Hz. However, functionalization of the POSS core with eight fluorophores leads to dye aggregation, as quantum mechanical simulation has revealed, worsening the optical properties and extinguishing the laser action. The new hybrid systems based on dye‐linked POSS nanoparticles open up the possibility of using these new photonic materials as alternative sources for optoelectronic devices, competing with dendronized or grafted polymers.     

Highly efficient pure white polymer light-emitting devices based on poly(N-vinylcarbazole) doped with blue and red phosphorescent dyes

Efficient white-polymer-light-emitting devices (WPLEDs) have been fabricated with a single emitting layer containing a hole-transporting host polymer,poly(N-vinylcarbzole),and an electron-transporting auxiliary,1,3-bis[(4-tert-butylphenyl)-1,3,4-oxadiazolyl]-phenylene,codoped with two phosphorescent dyes:Iridium(III)bis (2-(4,6-difluorophenyl)-pyridinato-N,C2') picolinate (FIrpic) and home-made Ir-G2 for blue and red emission,respectively.With the structure of ITO/PEDOT:PSS 4083(40 nm)/emission layer(80 nm)...     

Highly efficient non-doped blue fluorescent OLEDs with low efficiency roll-off based on hybridized local and charge transfer excited state emitters

Designing a donor–acceptor (D–A) molecule with a hybridized local and charge transfer (HLCT) excited state is a very effective strategy for producing an organic light-emitting diode (OLED) with a high exciton utilization efficiency and external quantum efficiency. Herein, a novel twisting D–π–A fluorescent molecule (triphenylamine–anthracene–phenanthroimidazole; TPAAnPI) is designed and synthesized. The excited state properties of the TPAAnPI investigated through photophysical experiments and density functional theory (DFT) analysis reveal that its fluorescence is due to the HLCT excited state. The optimized non-doped blue OLED using TPAAnPI as a light-emitting layer exhibits a novel blue emission with an electroluminescence (EL) peak at 470 nm, corresponding to the Commission International de L''Eclairage (CIE) coordinates of (0.15, 0.22). A fabricated device termed Device II exhibits a maximum current efficiency of 18.09 cd A⁻¹, power efficiency of 12.35 lm W⁻¹, luminescence of ≈29 900 cd cm⁻², and external quantum efficiency (EQE) of 11.47%, corresponding to a high exciton utilization efficiency of 91%. Its EQE remains as high as 9.70% at a luminescence of 1000 cd m⁻² with a low efficiency roll-off of 15%. These results are among the best for HLCT blue-emitting materials involved in non-doped blue fluorescent OLEDs. The performance of Device II highlights a great industrial application potential for the TPAAnPI molecule.

A new pure fluorescent blue HLCT-emitter was designed and synthesized. Highly efficient non-doped blue OLEDs with low efficiency roll-off were achieved.     

Highly efficient solid-state luminescence of carbonized polymer dots without matrix

Development of high-performance solid state luminescent carbon-based nanomaterials remains challenging. Here, strong blue-green fluorescent carbonized polymer dots (CPDs) from o-aminobenzenethiol and thiosalicylic acid (oABT-TSA-CPDs) with an absolute photoluminescence quantum yield (PLQY) of 76% in solid state without matrix were synthesized. Through adjusting the reaction temperature and time, the PL centers were proved to be carbon core state and surface state associated to carbonyl group which was the source of strong fluorescence emission in solid state. The mechanism of the unique phenomenon of enhanced emission from ethanol solution (PLQY = 7%) to powder (PLQY = 76%) was investigated by analyzing the chemical properties and structures of oABT-TSA-CPDs at different temperatures and oABT-TSA-CPDs/PVC composites, and was confirmed as fixation of PL centers.     

Anti-Her-2 monoclonal antibody conjugated polymer fluorescent nanoparticles probe for ovarian cancer imaging

Fluorescent nanoparticles (FNPs) with unique optical properties may be useful as biosensors in living cancer cell imaging and cancer targeting. A novel kind of polymer fluorescent nanoparticles (PFNPs) was synthesized and its application for ovarian cancer imaging with fluorescence microscopy imaging technology was presented in this study. The PFNPs were synthesized with precipitation polymerization by using methacrylic acid (MAA) as monomer, trimethylolpropane trimethacrylate (Trim) as cross-linker, azobisisobutyronitrile (AIBN) as radical initiator and butyl rhodamine B (BTRB) as fluorescent dye. And the fluorescent dye was embedded into the three-dimensional network of the polymer when the polymer was produced. With this method the PFNPs can be prepared easily. And then the PFNPs were successfully modified with anti-Her-2 monoclonal antibody. The fluorescence probe based on anti-Her-2 monoclonal antibody conjugated PFNPs has been used to detect ovarian cancer cells with fluorescence microscopy imaging technology. The experimental results demonstrate that the anti-Her-2 monoclonal antibody conjugated PFNPs can effectively recognize ovarian cancer cells and exhibit good sensitivity and exceptional photostability, which would provide a novel way for the diagnosis and curative effect observation of ovarian cancer cells.     

Quinoline-based aggregation-induced delayed fluorescence materials for highly efficient non-doped organic light-emitting diodes

Three new emitters,namely 10,10'-(quinoline-2,8-diyl)bis(10 H-phenoxazine)(Fene),10,10'-(quinoline-2,8-diyl)bis(10 H-phenothiazine)(Fens) and 10,10'-(quinoline-2,8-diyl)bis(9,9-dimethyl-9,10-dihydroacridine)(Yad),featuring quinoline as a new electron acceptor have been designed and conveniently synthesized.These emitters possessed small singlet-triplet splitting energy(ΔEst) and twisted structures,which not only endowed them show thermally activated delayed fluorescence(TADF)properties but also afforded a remarkable aggregation-induced emission(AIE) feature.Moreover,they also showed aggregation-induced delayed fluorescence(AIDF) property and good photoluminescence(PL) property,which are the ideal emitters for non-doped organic light-emitting diodes(OLEDs).Furthermore,high-performance non-doped OLEDs based on Fene,Fens and Yad were achieved,and excelle nt maximum external quantum efficiencies(EQE_(max)) of 14,9%,13.1% and 17,4%,respectively,were obtained.It was also found that all devices exhibited relatively low turn-on voltages ranging from 3.0 V to3.2 V probably due to their twisted conformation and the AIDF properties.These results demonstrated the quinoline-based emitters could have a promising application in non-doped OLEDs.     

Flavanthrene derivatives as photostable and efficient singlet exciton fission materials

Singlet exciton fission (SF) is believed to have the potential to break the Shockley–Queisser limit for third-generation solar cell devices, so it has attracted great attention. Conventional linear acene based SF materials generally suffer from low triplet energy and poor photostability. We report herein two flavanthrene derivatives, EH-Fla and TIPS-Fla, as new photostable singlet exciton fission materials. These N-doped two-dimensional angular fused acenes have three sets of aromatic Clar sextets, making them significantly more stable than linear acenes with only one sextet. Time-resolved spectroscopy characterization reveals that the SF process occurs in the polycrystalline films of EH-Fla and TIPS-Fla, with maximal triplet yields of 32% and 159%, respectively. The SF processes of these two molecules are mediated by excimer states. In EH-Fla, the low-lying excimer prevents the SF process from occurring effectively, resulting in a low triplet yield. In contrast, the excimer state in TIPS-Fla is mixed with strong CT coupling, which prompts efficient SF and results in a high triplet yield. Our results show that flavanthrene is a promising SF chromophore for photoenergy conversion applications, while a fine-tune of the intermolecular interaction is crucial for achieving high SF efficiency.

Flavanthrene derivatives can be designed into highly efficient and photostable singlet fission materials, owning to the N-doped two-dimensional angular fused acene framework, which is promising for photo energy conversion applications.     

Highly efficient hydrazination of conjugated nitroalkenes via imidazole or DMAP mediated Morita-Baylis-Hillman reaction

Novel alpha-hydrazino-alpha,beta-unsaturated nitroalkenes, which exhibit dynamic phenomenon on the NMR time scale, were synthesized in excellent yields via imidazole or DMAP mediated Morita-Baylis-Hillman (MBH) type reaction of nitroalkenes with azodicarboxylates.