Alkoxy substitution on simple non-fused electron acceptors for tuning the photoelectric properties of organic solar cells

In order to identify high-performance non-fused ring electron acceptors for bulk heterojunction (BHJ) solar cells, six structurally diverse molecules are designed and categorized into two series. The first series is anchored by R1 as the reference molecule, featured fixed BDT, IC-2F end groups and modified π bridges. The second series is anchored by R2 as the reference molecule, incorporated a terminal IC-2F and a central core modified with EDOT bridge. The electronic structure and photoelectric properties of all acceptor molecules were investigated using density functional theory (DFT) and time-dependent density functional theory (TD-DFT). Charge transfer matrix (CTM), Density of states (DOS) and Reorganization energy (RE) etc. were analyzed to provide fundamental knowledge on charge transport and electronic excitation. Among the studied molecules, W2 exhibited a smaller energy gap (1.74 eV) compared to the other molecules, effectively transferring its electron from HOMO to LUMO. At the same time, the W2 molecule has excellent V_oc and FF. Furthermore, W2 displayed the largest λ_max redshift compared to R1. Although W3 had a smaller value of λ_h, the comprehensive photovoltaic parameters of W2 were more excellent. The research results not only demonstrated the feasibility of introducing different alkoxy groups to alter the structure of the π bridge and central core is a feasible method for constructing high-performance NFREAs, but also highlighted that BDT cores combined with EDOT bridges are among the most promising small molecule acceptors (SMAs) that could be considered as reasonable candidates for synthesis and incorporation into organic solar cells. The results of this study are expected to provide seminal ideas for the design of high-performance non-fullerene acceptors.     

Ethynyl-linked perylene bisimide based electron acceptors for non-fullerene organic solar cells

Star-shaped electron acceptors based on perylene bisimide as end groups and spiro-aromatic core linked with ethynyl units were developed for nonfullerene solar cells. Ethynyl linkers are able to improve the planarity of conjugated backbone, resulting in enhanced electron mobility and power conversion efficiency in solar cells.     

Utilizing 3,4-ethylenedioxythiophene(EDOT)-bridged non-fullerene acceptors for efficient organic solar cells

A rational design of efficient low-band-gap non-fullerene acceptors(NFAs)for high-performance organic solar cells(OSCs)remains challenging;the main constraint being the decrease in the energy level of the lowest unoccupied molecular orbitals(LUMOs)as the bandgap of A-D-A-type NFAs decrease.Therefore,the short current density(J_sc)and open-circuit voltage(V_oc)result in a trade-off relationship,making it difficult to obtain efficient OSCs.Herein,three NFAs(IFL-ED-4 F,IDT-ED-4 F,and IDTT-ED-2 F)were synthesized to address the above-mentioned issue by introducing 3,4-ethylenedioxythiophene(EDOT)as aπ-bridge.These NFAs exhibit relatively low bandgaps(1.67,1.42,and 1.49 eV,respectively)and upshifted LUMO levels(-3.88,-3.84,and-3.81 eV,respectively)compared with most reported low-band-gap NFAs.Consequently,the photovoltaic devices based on IDT-ED-4 F blended with a PBDB-T donor polymer showed the best power conversion efficiency(PCE)of 10.4%with a high J_sc of 22.1 mA cm^-2 and Voc of 0.884 V among the examined NFAs.In contrast,IDTT-ED-4 F,which was designed with an asymmetric structure of the D-p-A type,showed the lowest efficiency of 1.5%owing to the poor morphology and charge transport properties of the binary blend.However,when this was introduced as the third component of the PM6:BTP-BO-4 Cl,complementary absorption and cascade energy-level alignment between the two substances could be achieved.Surprisingly,the IDTT-ED-4 F-based ternary blend device not only improved the Jscand Voc,but also achieved a PCE of 15.2%,which is approximately 5.3%higher than that of the reference device with a minimized energy loss of 0.488 eV.In addition,the universality of IDTT-ED-2 F as a third component was effectively demonstrated in other photoactive systems,specifically,PM6:BTPe C9 and PTB7-Th:IEICO-4 F.This work facilitates a better understanding of the structure–property relationship for utilizing efficient EDOT-bridged NFAs in high-performance OSC applications.     

Modulating morphology via side-chain engineering of fused ring electron acceptors for high performance organic solar cells

In this work, four fused ring electron acceptors(FREAs), 2F-C5, 2F-C6, 2F-C8 and 2F-C10, are developed to investigate the effect of side-chain size on the molecular properties and photovoltaic performance of FREA systematically. The elongation of side-chains in the FREAs not only improves their solubility in the processing solvent, but also enhances their miscibility with the donor PBDB-T. It helps the FREA diffuse into the donor PBDB-T during film-formation, thus leading to the decrease in domain size and domain purity from PBDB-T:2F-C5 to PBDB-T:2F-C10 blend films in sequence. The smaller domain size affords more D/A interfaces to benefit exciton dissociation and inhibit monomolecular recombination. However, severe bimolecular recombination occurs when the domain purity decreases to a critical point. Due to the dual function of the increment of side-chain length, both short-circuit current density(J_(SC)) and fill factor(FF) of devices exhibit an evolution of first increasing then decreasing from 2F-C5, 2F-C6, 2F-C8 to 2F-C10 based OSCs. The PBDB-T:2F-C8 based OSCs get a fine balance in morphology with moderate domain size as well as high domain purity simultaneously for the least charge carrier recombination, thus achieving the highest power conversion efficiency of 12.28% with the best J_(SC)(21.27 mA cm~(-2)) and FF(71.96%).     

Simple non-fullerene electron acceptors with unfused core for organic solar cells

Two simple unfused-cores based electron acceptors with different side units were developed for application in non-fullerene solar cells, in which the side chains have the significant effect on their absorption spectra and photovoltaic performance.     

Asymmetric molecular engineering in recent nonfullerene acceptors for efficient organic solar cells

Nonfullerene acceptors (NFAs), which usually possess symmetric skeletons, have drawn great attention in recent years due to their pronounced advantages over the fullerene counterparts. Moreover, breaking the symmetry of NFAs could fine tune the molecular dipole, solubility, energy level, intermolecular interaction, molecular packing, crystallinity, etc., and give rise to improved photovoltaic performance. Currently, there are three main strategies for the design of asymmetric NFAs. This review highlights the recent advances of high-performance asymmetric NFAs and briefly outlooks the materials exploration for the future.     

High electron mobility fluorinated indacenodithiophene small molecule acceptors for organic solar cells

Indacenodithiophene (IDT) derivatives are kinds of the most representative and widely used cores of small molecule acceptors (SMAs) in organic solar cells (OSCs). Here we systematically investigate the influence of end-group fluorination density and position on the photovoltaic properties of the IDT-based SMAs IDIC-nF (n = 0, 2, 4). The absorption edge of IDIC-nF red-shifts with the π-π stacking and crystallinity improvement, and their electronic energy levels downshift with increasing n. Due to the advantages of J_sc and FF as well as acceptable V_oc, the difluorinated IDIC-2F acceptor based OSCs achieve the highest power conversion efficiency (PCE) of 13%, better than the OSC devices based on IDIC and IDIC-4F as acceptors. And the photovoltaic performance of the PTQ10: IDIC-2F OSCs is insensitive to the active layer thickness: PCE still keep high values of 12.00% and 11.46% for the devices with active layer thickness of 80 and 354 nm, respectively. This work verifies that fine and delicate modulation of the SMAs molecular structure could optimize photovoltaic performance of the corresponding OSCs. Meanwhile, the thickness-insensitivity property of the OSCs has potential for large-scale and printable fabrication technology.     

Impact of symmetry-breaking of non-fullerene acceptors for efficient and stable organic solar cells

The concurrent enhancement of short-circuit current (J_SC) and open-circuit voltage (V_OC) is a key problem in the preparation of efficient organic solar cells (OSCs). In this paper, we report efficient and stable OSCs based on an asymmetric non-fullerene acceptor (NFA) IPC-BEH-IC2F. The NFA consists of a weak electron-donor core dithienothiophen[3,2-b]-pyrrolobenzothiadiazole (BEH) and two kinds of strong electron-acceptor (A) units [9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) with a tricyclic fused system and 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC2F)]. For comparison, the symmetric NFAs IPC-BEH-IPC and IC2F-BEH-IC2F were characterised. The kind of flanking A unit significantly affects the light absorption features and electronic structures of the NFAs. The asymmetric IPC-BEH-IC2F has the highest extinction coefficient among the three NFAs owing to its strong dipole moment and highly crystalline feature. Its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels lie between those of the IPC-BEH-IPC and IC2F-BEH-IC2F molecules. The IPC group also promotes molecular packing through the tricyclic π-conjugated system and achieves increased crystallinity compared to that of the IC2F group. Inverted-type photovoltaic devices based on p-type polymer:NFA blends with PBDB-T and PM6 polymers as p-type polymers were fabricated. Among all these devices, the PBDB-T:IPC-BEH-IC2F blend device displayed the best photovoltaic properties because the IPC unit provides balanced electronic and morphological characteristics. More importantly, the PBDB-T:IPC-BEH-IC2F-based device exhibited the best long-term stability owing to the strongly interacting IPC moiety and the densely packed PBDB-T:IPC-BEH-IC2F film. These results demonstrate that asymmetric structural modifications of NFAs are an effective way for simultaneously improving the photovoltaic performance and stability of OSCs.

A 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) moiety in asymmetric non-fullerene acceptors promotes the formation of a densely packed crystalline structure, enabling efficient and long-term stable organic solar cells.     

Dialkoxymethano[60]fullerenes as electron acceptors in thin-film organic solar cells

This study presents the synthesis, characterization, and electrochemical properties of four new dialkoxymethanofullerenes, as well as their performance in organic solar cells (OSCs) devices. Dialkoxymethanofullerenes were synthesized in 27%–32% yield by thermolysis of dialkoxyoxadiazolines and reaction with C₆₀ under reflux in toluene. The prepared compounds were then characterized and used for the first time as electron-acceptor materials in thin-film bulk heterojunction OSCs with PBTZT-stat-BDTT-8 as the electron donor material. The devices made with ethoxy-hexyloxymethanofullerene and methoxy-hexyloxymethanofullerene exhibited optimal power conversion efficiencies (PCEs) of 3.79% and 4.65%, with open-circuit voltage of 0.832 and 0.831 V, respectively. In contrast, the devices made with ethoxy-ethoxymethanofullerene and methoxy-ethoxymethanofullerene exhibited very low PCEs of <0.01% for both, indicating a large impact of the substituents on device performance.     

5-Phenyl-iminostilbene based organic dyes for efficient dye-sensitized solar cells

Four new 5-phenyl-iminostilbene dyes (ISB-3–6) containing electron-withdrawing benzo-[c][1,2,5]thiadiazole have been designed and synthesized for use as DSSCs. Their absorption properties and electrochemical and photovoltaic performances have been investigated systematically. Among these dyes, DSSCs based on a dye containing benzo-[c][1,2,5]thiadiazole and benzene moieties (ISB-4) showed the best performance: a short-circuit photocurrent density (J_sc) of 13.69 mA cm⁻², an open-circuit photovoltage (V_oc) of 722 mV, and a fill factor (FF) of 0.71, which corresponds to a power conversion efficiency (PCE) of 6.71%, under optimized conditions. Additionally, long-term stability of the ISB-4 based DSSCs with ionic-liquid electrolytes was demonstrated under 1000 h of light soaking, the photovoltaic performance is up to 5.75%. The results suggest that 5-phenyl-iminostilbene containing dyes are promising candidates for application in DSSCs.     

Macrocyclic triphenylamine based organic dyes for efficient dye-sensitized solar cells

A novel class of organic D-π-A dyes employing macrocyclic triphenylamine dimer as electron donor was designed and synthesized for dye-sensitized solar cells. The prepared compounds showed high chemical and elelctrochemical stabilities as well as good long-wave absorption. Photovoltaic devices based on these dyes showed high open circuit voltage (higher than that of N3) and achieved a solar energy to electricity conversion efficiency of 6.31%. All the performances indicate the dyes containing macrocyclic triphenylamine dimer is a good candidate for dyes sensitized solar cells.     

Latest progress on fully non-fused electron acceptors for high-performance organic solar cells

Benefitting from the development of non-fullerene acceptors(NFAs), remarkable advances have been achieved with the power conversion efficiency(PCE) exceeding 19% over the last few years. However, the major achievement comes from fused ring electron acceptors(FREAs) with complex structures, leading to high cost. Hence, it is urgent to design new materials to resolve the cost issues concerning basic commercial requirements of organic solar cells. Recently, great progress has been made in fully non...     

Cyclometalated Pt complex based random terpolymers as electron acceptors for all polymer solar cells

Various molar ratios of platinum complexes were introduced into the conjugated backbone of the well‐studied poly[[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)](PNDIT2) acceptor polymer through random terpolymer approach. Terpolymers PNDIT2Ptx (x = 1, 2 and 5) exhibited slightly higher melting point (T_m), crystallization temperature, HOMO and LUMO energy levels than the control PNDIT2 copolymer due to the introduction of small amount of weaker electron‐withdrawing bulky rigid Pt complex instead of strong electron‐withdrawing flexible naphthalene diimide. When blended them with poly[[2,6′‐4,8‐di(5‐ethylhexylthienyl)benzo[1,2‐b;3,3‐b] dithiophene] [3‐fluoro‐2[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]] (PTB7‐Th) in all polymer solar cells, enhanced power conversion efficiency of 4.51% (3.74%) was obtained in terpolymer PNDIT2Pt1 based device compared to 3.88% (3.24%) of the control PNDIT2 at the same inverted (conventional) device conditions. The enhancement was probably ascribed to higher hole and electron transport ability and more efficient charge separation. To the best of our knowledge, this is the first example of random terpolymer acceptors based on heavy metal complexes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 105–115     

Altering alkyl-chains branching positions for boosting the performance of small-molecule acceptors for highly efficient nonfullerene organic solar cells

The emergence of the latest generation of small-molecule acceptor(SMA) materials,with Y6 as a typical example,accounts for the surge in device performance for organic solar cells(OSCs).This study proposes two new acceptors named Y6-C2 and Y6-C3,from judicious alteration of alkyl-chains branching positions away from the Y6 backbone.Compared to the Y6,the Y6-C2 exhibits similar optical and electrochemical properties,but better molecular packing and enhanced crystallinity.In contrast,the Y6-C3 shows a significant blue-shift absorption in the solid state relative to the Y6 and Y6-C2.The as-cast PM6:Y6-C2-based OSC yields a higher power conversion efficiency(PCE) of 15.89% than those based on the Y6(15.24%) and Y6-C3(13.76%),representing the highest known value for as-cast nonfullerene OSCs.Prominently,the Y6-C2 displays a good compatibility with the PC_(71)BM.Therefore,a ternary OSC device based on PM6:Y6-C2:PC_(71)BM(1.0:1.0:0.2) was produced,and it exhibits an outstanding PCE of 17.06% and an impressive fill factor(FF) of 0.772.Our results improve understanding of the structureproperty relationship for state-of-the-art SMAs and demonstrate that modulating the structure of SMAs via fine-tuning of alkylchains branching positions is an effective method to enhance their performance.     

A new perspective for organic solar cells: triplet nonfullerene acceptors

正In the last decade,the rapid development of bulk heterojunction(BHJ)organic solar cells(OSCs)has been witnessed and the power conversion efficiencies(PCEs)have reached over 13%[1].Though fullerene derivatives have played dominant roles for BHJ OSCs,nonfullerene acceptors recently showed a promising potential in replacing fullerene derivatives since they possess readily tunable bandgaps,strong and broad absorption,and low cost production[2,3].     

Novel organic dyes for efficient dye-sensitized solar cells

Two novel metal-free organic dyes containing thienothiophene and thiophene segments have been synthesized. Nano-crystalline TiO2 dye-sensitized solar cells were fabricated using these dyes as light-harvesting sensitizers, and a high solar energy-to-electricity conversion efficiency of 6.23% was achieved.     

Phenothiazine derivatives for efficient organic dye-sensitized solar cells

Novel organic dyes based on the phenothiazine (PTZ) chromophore were designed and synthesized for dye-sensitized solar cells, which give solar energy-to-electricity conversion efficiency (eta) of up to 5.5% in comparison with the reference Ru-complex (N3 dye) with an eta value of 6.2% under similar experimental conditions.     

Small molecular non-fullerene electron acceptors for P3HT-based bulk-heterojunction solar cells

Three small molecules with the same arms and different cores of perylene diimide(PDI)or indaceno[2,1-b:6,5-b']dithiophene(IDT)were designed and synthesized as the acceptor materials for P3HT-based bulk-heterojunction(BHJ)solar cells.The impacts of the different cores on the optical absorption,electrochemical properties,electron mobility,film morphology,photoluminescene characteristics,and solar cell performance were thoroughly studied.The three compounds possess a broad absorption covering the wavelength range of 400–700 nm and relatively low lowest unoccupied molecular orbital(LUMO)energy levels of?3.86,?3.81 and?3.99 eV.The highest power conversion efficiency of 0.82%was achieved for the BHJ solar cells based on SM3 as the acceptor material,the compound with a PDI core.     

A series of dithienobenzodithiophene based small molecules for highly efficient organic solar cells

Three acceptor-donor-acceptor (A-D-A) small molecules DCAODTBDT, DRDTBDT and DTBDTBDT using dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene as the central building block, octyl cyanoacetate, 3-octylrhodanine and thiobarbituric acid as the end groups were designed and synthesized as donor materials in solution-processed photovoltaic cells (OPVs). The impacts of these different electron withdrawing end groups on the photophysical properties, energy levels, charge carrier mobility, morphologies of blend films, and their photovoltaic properties have been systematically investigated. OPVs device based on DRDTBDT gave the best power conversion efficiency (PCE) of 8.34%, which was significantly higher than that based on DCAODTBDT (4.83%) or DTBDTBDT (3.39%). These results indicate that rather dedicated and balanced consideration of absorption, energy levels, morphology, mobility, etc. for the design of small-molecule-based OPVs (SM-OPVs) and systematic investigations are highly needed to achieve high performance for SM-OPVs.     

New perylene diimide electron acceptors for organic electronics: Synthesis,optoelectronic properties and performance in perovskite solar cells

Two new non-fullerene acceptors based on perylene diimide with acetylenic bridges were designed and synthesized employing Stille and Sonogashira coupling reactions as the key steps. Their optical and electronic properties were explored by UV–VIS spectroscopy and cyclic voltammetry, and energies of frontier molecular orbitals were estimated. Their preliminary studies in perovskite solar cells as electron transport materials showed the best power conversion efficiency for photocells of 14.18% value.