Enhanced Metal-Support Interactions Boost the Electrocatalytic Water Splitting of Supported Ruthenium Nanoparticles on a Ni3N/NiO Heterojunction at Industrial Current Density

Developing highly efficient and stable hydrogen production catalysts for electrochemical water splitting (EWS) at industrial current densities remains a great challenge. Herein, we proposed a heterostructure-induced-strategy to optimize the metal-support interaction (MSI) and the EWS activity of Ru-Ni₃N/NiO. Density functional theory (DFT) calculations firstly predicted that the Ni₃N/NiO-heterostructures can improve the structural stability, electronic distributions, and orbital coupling of Ru-Ni₃N/NiO compared to Ru-Ni₃N and Ru-NiO, which accordingly decreases energy barriers and increases the electroactivity for EWS. As a proof-of-concept, the Ru-Ni₃N/NiO catalyst with a 2D Ni₃N/NiO-heterostructures nanosheet array, uniformly dispersed Ru nanoparticles, and strong MSI, was successfully constructed in the experiment, which exhibited excellent HER and OER activity with overpotentials of 190 mV and 385 mV at 1000 mA cm⁻², respectively. Furthermore, the Ru-Ni₃N/NiO-based EWS device can realize an industrial current density (1000 mA cm⁻²) at 1.74 V and 1.80 V under alkaline pure water and seawater conditions, respectively. Additionally, it also achieves a high durability of 1000 h (@ 500 mA cm⁻²) in alkaline pure water.     

Highly exposed NiFeOx nanoclusters supported on boron doped carbon nanotubes for electrocatalytic oxygen evolution reaction

The development of efficient and cost-effective electrocatalysts for oxygen evolution reaction (OER) is crucial for the overall water splitting. Herein, we prepared a highly exposed NiFeO_x ultra-small nanoclusters supported on boron-doped carbon nonotubes catalyst, which achieves a 10 mA/cm² anodic current density at a low overpotential of 213 mV and the Tafel slope of 52 mV/dec in 1.0 mol/L KOH, superior to the pristine NiFeO_x-CNTs and other state-of-the-art OER catalysts in alkaline media. A combination study (XPS, sXAS and XAFS) verifies that the local atomic structure of Ni and Fe atoms in the nanoclusters are similar to NiO and Fe₂O₃, respectively, and the B atoms which are doped into the crystal lattice of CNTs leads to the optimization of Ni 3d e_g orbitals. Furthermore, in-situ X-ray absorption spectroscopies reveal that the high valence state of Ni atoms are served as the real active sites. This work highlights that the precise control of highly exposed multicomponent nanocluster catalysts paves a new way for designing highly efficient catalysts at the atomic scale.     

Chromium-Doped Nickel Oxide and Nickel Nitride Mediate Selective Electrocatalytic Oxidation of Sterol Intermediates Coupled with H2 Evolution

Replacing the oxygen evolution reaction (OER) with the thermodynamically favorable electrooxidation of organics is considered a promising approach for the simultaneous production of hydrogen (H₂) and high-value chemicals. However, exploring and optimizing efficient electrocatalysts remains a challenge for large-scale production of value-added steroid carbonyl and H₂. Herein, Cr-NiO/GF and Cr-Ni₃N/GF (GF: graphite felt) electrocatalysts were designed as anode and cathode for the production of steroid carbonyls and H₂, respectively. The cooperative Cr-NiO and ACT (4-acetamido-2,2,6,6-tetramethyl-1-piperidine-N-oxyl) electrocatalyst can be extended to the electrooxidation of a series of steroid alcohols to the corresponding aldehydes. Additionally, Cr-Ni₃N displays superior electrocatalytic activity for hydrogen evolution reaction (HER), with a low overpotential of 35 mV to deliver 10 mA cm⁻². Furthermore, the system coupled with anodic electrooxidation of sterol and cathodic HER exhibited excellent performance with high space-time yield of 48.85 kg m⁻³ h⁻¹ for steroid carbonyl and 1.82 L h⁻¹ for H₂ generation in a two-layer stacked flow cell. Density Functional Theory (DFT) calculations indicated that Cr doping effectively stabilizes ACTH on the NiO surface, and ACTH molecule could be captured via the ketonic oxygen interaction with Cr, resulting in excellent electrocatalytic activity. This work develops a novel approach to the rational design of efficient electrocatalysts for the simultaneous production of H₂ and large-scale value-added pharmaceutical carbonyl intermediates.     

NiO/MnO_2分级纳米片阵列复合材料的制备与超电容性能

通过化学浴沉积和水热法在泡沫镍上制备了NiO/MnO_2分级纳米片阵列复合材料,XRD和SEM测试表明NiO纳米片垂直生长在泡沫镍上,交叉形成网状阵列结构;MnO_2纳米介孔泡沫进一步生长在NiO纳米片两侧,与NiO形成了壳核式的复合结构。循环伏安和恒流充放电测试发现,NiO/MnO_2分级纳米片阵列复合材料的电化学性能相比复合前得到明显改善,在1 A·g~(-1)的电流密度下,比电容提高至1 297 F·g~(-1);2 A·g~(-1)下循环1 000次,比电容保持率高达97%,比电容和循环性能的改善是由于分级纳米片阵列复合结构方便了电解液传质,扩大了活性材料与电解液的接触,促进了赝电容反应,提高了NiO和MnO_2的结构稳定性。     

NiO/MnO2分级纳米片阵列复合材料的制备与超电容性能

通过化学浴沉积和水热法在泡沫镍上制备了NiO/MnO₂分级纳米片阵列复合材料,XRD和SEM测试表明NiO纳米片垂直生长在泡沫镍上,交叉形成网状阵列结构;MnO₂纳米介孔泡沫进一步生长在NiO纳米片两侧,与NiO形成了壳核式的复合结构。循环伏安和恒流充放电测试发现,NiO/MnO₂分级纳米片阵列复合材料的电化学性能相比复合前得到明显改善,在1 A·g^-1的电流密度下,比电容提高至1 297 F·g^-1;2 A·g^-1下循环1 000次,比电容保持率高达97%,比电容和循环性能的改善是由于分级纳米片阵列复合结构方便了电解液传质,扩大了活性材料与电解液的接触,促进了赝电容反应,提高了NiO和MnO₂的结构稳定性。     

Interfacial Coupling of Graphene with Nickel Nanoparticles for Water Splitting and Urea Oxidation: A Spectroelectrochemical Investigation

Nickel nanoparticle and graphene interfaces of various stoichiometries were created through electrodeposition techniques. The catalytic behavior of the electrodeposited films was investigated through spectro-electrochemical methodologies. UV-vis absorbance spectra of the electrodeposited films are significantly different in the air and alkaline medium. Furthermore, UV-vis and Raman spectroscopy confirmed the coupling of Ni nanoparticles (Ni-NP) with the graphene framework, along with NiO and Ni(OH)₂. A combination of Raman and impedance spectroscopy revealed that the surface adsorption and charge transfer properties of the electrodeposited films are entirely dependent on the defects on graphene structure as well as distribution of Ni-NP on graphene. The electrodeposited films possess heterogeneous catalytic properties with a low overpotential of 50 mV (10 mA/cm⁻²) for hydrogen evolution reaction, as well as 601 mV and 391 mV (at 50 mA/cm⁻²) for the oxygen evolution reaction and urea oxidation reaction, respectively. In addition, eelectrodeposited samples show extraordinary overall water splitting performance by achieving a current density of 10 mA/cm² at a very low applied potential of 1.38 V. This synergistic coupling of Ni and graphene renders the electrodeposited samples promising candidates as electrodes for overall water splitting in alkaline and urea-supplemented solutions.     

Preferential Co substitution on Ni sites in Ni–Fe oxide arrays enabling large-current-density alkaline oxygen evolution

Developing low-cost and high-activity transition metal oxide electrocatalysts for an efficient oxygen evolution reaction (OER) at a large current density is highly demanded for industrial application and remains a big challenge. Herein, we report vertically aligned cobalt doped Ni–Fe based oxide (Co–NiO/Fe₂O₃) arrays as a robust OER electrocatalyst via a simple method combining hydrothermal reaction with heat treatment. Density functional theory calculation and XRD Rietveld refinement reveal that Co preferentially occupies the Ni sites compared to Fe in the Ni–Fe based oxides. The electronic structures of the Co–NiO/Fe₂O₃ could be further optimized, leading to the improvement of the intrinsic electronic conductivity and d-band center energy level and the decrease in the reaction energy barrier of the rate-determining step for the OER, thus accelerating its OER electrocatalytic activity. The Co–NiO/Fe₂O₃ nanosheet arrays display state-of-the-art OER activities at a large current density for industrial demands among Fe–Co–Ni based oxide electrocatalysts, which only require an ultra-low overpotential of 230 mV at a high current density of 500 mA cm⁻², and exhibit superb durability at 500 mA cm⁻² for at least 300 h without obvious degradation. The Co–NiO/Fe₂O₃ nanosheet arrays also have a small Tafel slope of 33.9 mV dec⁻¹, demonstrating fast reaction kinetics. This work affords a simple and effective method to design and construct transition metal oxide based electrocatalysts for efficient water oxidation.

Co–NiO/Fe₂O₃ nanosheets featuring Co substitution on Ni sites can effectively regulate electronic structures and exhibit high OER activities with low overpotential (η₅₀₀ = 230 mV), small Tafel slope (33.9 mV dec⁻¹) and superb durability for 300 h.     

Synchronous Electrocatalytic Design of Architectural and Electronic Structure Based on Bifunctional LDH-Co3O4/NF toward Water Splitting

The rational design of highly efficient bifunctional electrocatalysts for water splitting is extremely urgent for application in sustainable energy conversion processes to alleviate the energy crisis and environmental pollution. In this work, through simple deposition of layered double hydroxides (LDH) on Co₃O₄/NF (NF=nickel foam) nanosheets arrays, hierarchical Co³⁺-rich materials based on LDH-Co₃O₄/NF are prepared as highly active and stable electrocatalysts for water splitting. The NiFe-LDH-Co₃O₄/NF demonstrates excellent electrochemical activity with an overpotential of 214 mV for the OER and an overpotential of 162 mV for the HER at 10 mA cm⁻². Such a performance is attributed to the optimized electronic states with a high concentration of Co³⁺, which improves the intrinsic activity, and the sheet-on-sheet hierarchical structure, which increases the number of active sites. The unique synchronous design of both the architectural and electronic structure of nanomaterials can simultaneously accelerate the reaction kinetics and provide a more convenient charge transfer path. Therefore, the strategy reported herein may open a new pathway for the design of excellent electrocatalysts for water splitting.     

Nanoporous platinum–cobalt alloy for electrochemical sensing for ethanol,hydrogen peroxide,and glucose

Nanoporous platinum–cobalt (NP–PtCo) alloy with hierarchical nanostructure is straightforwardly fabricated by dealloying PtCoAl alloy in a mild alkaline solution. Selectively etching Al resulted in a hierarchical three-dimensional network nanostructure with a narrow size distribution at 3 nm. The as-prepared NP–PtCo alloy shows superior performance toward ethanol and hydrogen peroxide (H₂O₂) with highly sensitive response due to its unique electrocatalytic activity. In addition, NP–PtCo also exhibits excellent amperometric durability and long-term stability for H₂O₂ as well as a good anti-interference toward ascorbic acid, uric acid, and dopamine. The hierarchical nanoporous architecture in PtCo alloy is also highly active for glucose sensing electrooxidation and sensing in a wide linear range. The NP–PtCo alloy holds great application potential for electrochemical sensing with simple preparation, unique catalytic activity, and high structure stability.     

Hierarchical Architectures Based on Ru Nanoparticles/Oxygen-Rich-Carbon Nanotubes for Efficient Hydrogen Evolution

Highly active and durable electrocatalysts are essential for producing hydrogen fuel through the hydrogen evolution reaction (HER). Here, a uniform deposition of Ru nanoparticles strongly interacting with oxygen-rich carbon nanotube architectures (Ru-OCNT) through ozonation and hydrothermal approaches has been designed. The hierarchical structure of Ru-OCNT is made by self-assembly of oxygen functionalities of OCNT. Ru nanoparticles interact strongly with OCNT at the Ru/OCNT interface to give excellent catalytic activity and stability of the Ru-OCNT, as further confirmed by density functional theory. Owing to the hierarchical structure and adjusted surface chemistry, Ru-OCNT has an overpotential of 34 mV at 10 mA cm⁻² with a Tafel slope of 27.8 mV dec⁻¹ in 1 M KOH, and an overpotential of 55 mV with Tafel slope of 33 mV dec⁻¹ in 0.5 M H₂SO₄. The smaller Tafel slope of Ru-OCNT than Ru-CNT and commercial Pt/C in both alkaline and acidic electrolytes indicates high catalytic activity and fast charge transfer kinetics. The as-proposed chemistry provides the rational design of hierarchically structured CNT/nanoparticle electrocatalysts for HER to produce hydrogen fuel.     

Iron–Cobalt Phosphomolybdate with High Electrocatalytic Activity for Oxygen Evolution Reaction

Iron–cobalt phosphomolybdate (FeCoPM₁₂) nanoparticles, which are highly efficient catalytic materials for the oxygen evolution reaction (OER), were fabricated through a coprecipitation route. Compared with iron–cobalt hydroxide and state‐of‐the‐art RuO₂ electrocatalysts, the as‐prepared FeCoPM₁₂ sample exhibited robust OER catalytic activity with a low overpotential of 258 mV at a current density of 10 mA cm⁻² and a small Tafel slope of 33 mV dec⁻¹. Moreover, the as‐synthesized sample presented preferable stability and after 10 h at 1.52 V the current density degraded by merely 8.3 %. This is ascribed to the high electrochemical stability and small porous structure of FeCoPM₁₂, which provide effective electron transmission and improve the catalytic performance for OER in alkaline media.     

Folded nanosheet-like Co<Subscript>0.85</Subscript>Se array for overall water splitting

Active, stable, and earth-abundant bifunctional electrocatalyst for overall water splitting is pivotal to actualize large-scale water splitting via electrolysis. In this work, the hierarchical folded nanosheet-like Co_0.85Se array on Ni foam is constructed by liquid-phase chemical conversion with cobalt precursor nanorod array. It can serve as an efficient bifunctional electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte, with a current density of 10 mA cm^?2 at overpotential of 232 mV for OER and 129 mV for HER and Tafel slope of 78.9 mV dec^?1 for OER and 95.0 mV dec^?1 for HER, respectively. The two-electrode alkaline water electrolyzer utilizing this folded nanosheet-like Co_0.85Se array as both anode and cathode toward overall water splitting offered a current of 10 mA cm^?2 at a cell voltage of 1.60 V. This work explores an efficient and low-cost electrocatalyst for overall water splitting application in alkaline electrolytes.     

介孔氧化镍的合成、表征和在电化学电容器中的应用

以十二烷基硫酸钠为模板剂, 采用尿素为沉淀剂, 用均匀沉淀法, 适当控制尿素的水解速度, 制备具有介孔结构的氢氧化镍胶体, 在不同温度下焙烧处理得到孔分布集中的氧化镍介孔分子筛. 结果表明, 在523 K下焙烧得到的氧化镍BET比表面达到477.7 m²•g^－1. 结构表征还显示, 介孔氧化镍的孔壁为多晶结构, 其孔结构形成机理应为准反胶束模板机理. 循环伏安法表明用NiO介孔分子筛制备的电极有很好的电容性能. 与浸渍法和阴极沉淀法制得的NiO相比, 这种介孔结构的NiO能够大量用来制作电化学电容器电极, 并且保持较高的比电容量和良好的电容性能.     

Controlled Synthesis of CuCo2S4@Ni(OH)2 Hybrid Nanorod Arrays for Water Splitting at an Ultralow Cell Voltage of 1.47 V

Developing environmentally friendly and highly active water splitting catalysts would be of great significance for clean energy conversion and utilization processes. Heterogeneous CuCo₂S₄@Ni(OH)₂ nanorod arrays with abundant oxygen vacancy firstly have been designed through a controllable hydrothermal and electrodeposition method. The synergies and open structures of the particular hierarchical structure together with the abundant oxygen vacancies offer more surface reactive centers, which can promote the electron transfer rate and reduce the activation energy of intermediate species. The CuCo₂S₄@Ni(OH)₂–20 min nanorod arrays are considered as an excellent and robust electrocatalyst for the proton reduction under an alkaline condition with an extraordinary low overpotential of 117 mV at 10 mA cm^?2. The CuCo₂S₄@Ni(OH)₂–20 min heterostructures electrode is also stable and robust for the water oxidation reaction, needing an overpotential of only 250 mV to obtain 100 mA cm^?2. Therefore, an alkaline electrolyzer was designed using CuCo₂S₄@Ni(OH)₂–20 min nanorod arrays as bifunctional electrocatalyst, which can complete overall water splitting at a cell voltage of 1.47 V with 10 mA cm^?2, suggesting a promising combination of the same material for efficient overall water splitting device. The cell voltage of 1.47 V, to our knowledge, is among the lowest values of the published support catalysts for electrocatalytic water splitting up to now.     

Facile one-step synthesis of Ru doped NiCoP nanoparticles as highly efficient electrocatalysts for oxygen evolution reaction

Transition metal phosphides (TMPs) as ever-evolving electrocatalytic materials have attracted increasing attention in water splitting reactions owing to their cost-effective, highly active and stable catalytic properties. This work presents a facile synthetic route to NiCoP nanoparticles with Ru dopants which function as highly efficient electrocatalysts for oxygen evolution reaction (OER) in alkaline media. The Ru dopants induced a high content of Ni and Co vacancies in NiCoP nanoparticles, and the more defective Ru doped NiCoP phase than undoped NiCoP ones led to a greater number of catalytically active sites and improved electrical conductivity after undergoing electrochemical activation. The Ru doped NiCoP catalyst exhibited high OER catalytic performance in alkaline media with a low overpotential of 281 mV at 10 mA cm⁻² and a Tafel slope of 42.7 mV dec⁻¹.     

Cu@Cu3P Core–Shell Nanowires Attached to Nickel Foam as High-Performance Electrocatalysts for the Hydrogen Evolution Reaction

The development of highly efficient and inexpensive electrocatalysts is of great importance for generating renewable energy. In this work, Cu@Cu₃P core–shell nanowires grown on nickel foam (Cu@Cu₃P/NF) are prepared by a novel in situ reduction of CuSO₄ ⋅ 5 H₂O, which forms Cu, followed by surface oxidation and low-temperature phosphorization. The unique hierarchical architecture of Cu@Cu₃P/NF integrates the advantages of enlarged surface area, fast electron transport, numerous channels for gas rapid diffusion, non-polymer binder, and enhanced catalytic performance. Remarkably, Cu@Cu₃P/NF-50, with a molar ratio of Cu/Cu₃P of around 2.63, reveals a highly efficient catalytic performance for the hydrogen evolution reaction in alkaline solution with a Tafel slope of 59 mV dec⁻¹ and a long durability of 48 h. Overpotentials as low as 218 and 302 mV are required to reach current densities of 10 and 100 mA cm⁻², respectively. Furthermore, the scientific understanding and design principle of Cu@Cu₃P/NF with controlled performance will encourage more research into other high-performance, low-cost electrocatalysts for renewable energy.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Tuning the Composition of PdCuNi Hollow Nanospheres for Low Cost and Efficient Catalyst Towards Glycol Electrooxidation

In this research, we reported an effective approach to prepare low cost and efficient electrocatalyst for the glycol electrooxidation. The synthetic process involves the replacement reactions between CuCl₂/H₂PdCl₄ and Ni nanospheres template. Through controlling the precursor ratio, the Pd/Cu/Ni ratio of the final trimetallic products can be tuned. The prepared electrocatalysts present a monodispersed nanospheres structure with a hollow cavity. The prepared Pd₄₁Cu₂₇Ni₉ shows the best catalytic activity (0.021 A cm⁻² at 0.9 V vs. RHE) for glycol electrooxidation, which is much higher than that of the commercial Pd/C (0.0014 A cm⁻² at 0.9 V vs. RHE).     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

Controllable Modulation of Defects for Layered Double Hydroxide Nanosheets by Altering Intercalation Anions for Efficient Electrooxidation Catalysis

Hydrazine (N₂H₄) is considered as one of the most potential energy storage materials in liquid fuel cells, as it contains high energy and power density, and the high-efficiency oxidation of N₂H₄ in fuel cells has drawn great attention. However, the most used catalysts are expensive noble metal catalysts, thus the development of highly efficient non-noble metal catalysts is crucial to reduce the cost of hydrazine oxidation in practical industry. Herein, we synthesized a series of CoFe-layered double hydroxides (CoFe-LDHs) intercalated with different anions via a simple one-step co-precipitation method for the electrooxidation of hydrazine. Through altering the intercalated anions of CoFe-LDHs, the defects and the electronic structure can be well controlled, and the catalytic performance for the electrooxidation of hydrazine were well promoted by using NO₃⁻ intercalated into CoFe-LDH compared with other anions (like Cl⁻, BO₃³⁻, CO₃²⁻). This work developed a series of hydrazine electrooxidation catalysts and established the relationship between the intercalated anions, the fine structure of the catalyst and the electrocatalytic performance.