A ZIF-8 Host for Dendrite-Free Zinc Anodes and N,O Dual-doped Carbon Cathodes for High-Performance Zinc-Ion Hybrid Capacitors

Zn is a promising anode for aqueous energy storage owing to it intrinsic superior properties such as large capacity, abundant reserves, low potential and safety. But, the growth of dendrites during charge and discharge leads to a decrease in reversibility. In addition, further development of zinc-ion hybrid capacitors (ZICs) is seriously challenging because of the lack of an exceptional cathode. Herein, we use ZIF-8 annealed at 500 °C (annealed ZIF-8) as a host material for stable and dendrite-free Zn anodes. Utilization of annealed ZIF-8 results in dendrite-free Zn deposition and stripping as a result of its porous construction, which contains trace Zn. Furthermore, we firstly proposed innovative N,O dual-doped carbon which was designed by the derived ZIF-8 (ZIF-8 derived C) as cathode for high-energy and power-density ZICs. The new ZIC assembled by Zn@annealed ZIF-8 anode and ZIF-8 derived C cathode provides a capacity of 135.5 mAh g⁻¹ and an energy density of 108.4 Wh kg⁻¹ with a power density of 800 W kg⁻¹ at 1.0 A g⁻¹. In addition, it shows outstanding cycling stability of 91% capacity retention after 6000 cycles at 5.0 A g⁻¹. Moreover, the solid-state ZICs can drive LEDs and smart watches. This ZIC holds promise for the practical application of supercapacitors.     

Nanocomposites induced by two-dimensional titanium carbide nanosheets for highly efficient energy storage

Surface group-rich titanium carbide nanosheets (TCNSs) were successfully fabricated by simply etching Ti₃AlC₂ powders and used as dielectric fillers to promote the dielectric and energy storage performances of poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-based composites. The PVDF-HFP/TCNS composites realize a high dielectric constant and low dielectric loss of 16.3 and 0.034 at 10² Hz, respectively. Importantly, a high energy storage density (U_e) of 0.367 J cm⁻³ at 900 kV cm⁻¹ and a high energy storage efficiency (η ≥ 78.9%) at a TCNS content of only 0.5 wt% are obtained, which indicates that incorporating TCNS is an efficient route in enhancing U_e while maintaining a high level η of the PVDF-HFP-based composites. According to detailed characterization results, a mechanism related to the reduction of lamellar crystals in the PVDF-HFP matrix is suggested. The above mechanism restricts the movement of polymer chains near the filler-matrix interface and is proposed to be responsible for the outstanding dielectric and energy storage performances. Consequently, this work provides a simple and effective method for fabricating highly efficient energy storage nanocomposites.     

Synergetic ternary metal oxide nanodots-graphene cathode for high performance zinc energy storage

Zinc-based electrochemistry energy storage with high safety and high theoretical capacity is considered to be a competitive candidate to replace lithium-ion batteries. In electrochemical energy storage, multi-metal oxide cathode materials can generally provide a wider electrochemical stability window and a higher capacity compared with single metal oxides cathode. Here, a new type of cathode material, MnFe₂Co₃O₈ nanodots/functional graphene sheets, is designed and used for aqueous hybrid Zn-based energy storage. Coupling with a hybrid electrolyte based on zinc sulfate and potassium hydroxide, the as-fabricated battery was able to work with a wide electrochemical window of 0.1∼1.8 V, showed a high specific capacity of 660 mAh/g, delivered an ultrahigh energy density of 1135 Wh/kg and a scalable power density of 5754 W/kg (calculated based on the cathode), and displayed a long cycling life of 1000 cycles. These are mainly attributed to the valence charge density distribution in MnFe₂Co₃O₈ nanodots, the good structural strengthening as well as high conductivity of the cathode, and the right electrolyte. Such cathode material also exhibited high electrocatalytic activity for oxygen evolution reaction and thus could be used for constructing a Zn-air battery with an ultrahigh reversible capacity of 9556 mAh/g.     

2020 roadmap on two-dimensional materials for energy storage and conversion

Energy storage and conversion have attained significant interest owing to its important applications that reduce CO₂ emission through employing green energy. Some promising technologies are included metal-air batteries, metal-sulfur batteries, metal-ion batteries, electrochemical capacitors, etc. Here, metal elements are involved with lithium, sodium, and magnesium. For these devices, electrode materials are of importance to obtain high performance. Two-dimensional (2D) materials are a large kind of layered structured materials with promising future as energy storage materials, which include graphene, black phosporus, MXenes, covalent organic frameworks (COFs), 2D oxides, 2D chalcogenides, and others. Great progress has been achieved to go ahead for 2D materials in energy storage and conversion. More researchers will join in this research field. Under the background, it has motivated us to contribute with a roadmap on ‘two-dimensional materials for energy storage and conversion.     

Inorganic nanocrystal-dynamic porous polymer assemblies with effective energy transfer for sensitive diagnosis of urine copper

Despite their remarkable mechanical, optical, and electrical properties, inorganic particles and dynamic polymer assemblies encounter difficulties in their compatibility with regards to structural order and complexity. Here, covalent organic frameworks (COFs) constructed through reversible coupling reactions were exploited as dynamic porous polymers to prepare inorganic nanocrystal-polymer assemblies. Under an in situ growth process, carbon quantum dots (CDs) were gradually prepared in the COF cavity, with a narrow size distribution (2 ± 0.5 nm). The well-established assemblies achieve effective energy transfer from the inorganic to the organic part (efficiency > 80%), thus rendering a ∼130% increase in quantum yield compared with the pristine COF network. Notably, the hybrid material realizes a simple, selective, and sensitive diagnostic tool for urine copper, surpassing the detection limit of COF solid by 150 times. Beyond the scientific and fundamental interests, such hybrid assemblies are attractive from technological perspectives as well, for example, in energy storage, electronics, catalysis, and optics.

Despite their remarkable mechanical, optical, and electrical properties, inorganic particles and dynamic polymer assemblies encounter difficulties in their compatibility with regards to structural order and complexity.     

An aqueous zinc-ion hybrid super-capacitor for achieving ultrahigh-volumetric energy density

Zinc-ion hybrid super-capacitors are regarded as promising safe energy storage systems. However, the relatively low volumetric energy density has become the main bottlenecks in practical applications of portable electronic devices. In this work, the zinc-ion hybrid super-capacitor with high volumetric energy density and superb cycle stability had been constructed which employing the high-density three-dimensional graphene hydrogel as cathode and Zn foil used as anode in 1 mol/L ZnSO₄ electrolyte. Benefiting from the abundant ion transport paths and the abundant active sites for graphene hydrogel with high density and porous structure, the zinc-ion hybrid super-capacitor exhibited an extremely high volumetric energy density of 118.42 Wh/L and a superb power density of 24.00 kW/L, as well as an excellent long cycle life (80% retention after 30,000 cycles at 10 A/g), which was superior to the volumetric energy density of the reported zinc-ion hybrid super-capacitors. This device, based on the fast ion adsorption/desorption on the capacitor-type graphene cathode and reversible Zn²⁺ plating/stripping on the battery-type Zn anode, which will inspire the development of zinc-ion hybrid super-capacitor in miniaturized devices.     

Thermodynamic insights into n-alkanes phase change materials for thermal energy storage

n-Alkanes have been widely used as phase change materials (PCMs) for thermal energy storage applications because of their exceptional phase transition performance, high chemical stability, long term cyclic stability and non-toxicity. However, the thermodynamic properties, especially heat capacity, of n-alkanes have rarely been comprehensively investigated in a wide temperature range, which would be insufficient for design and utilization of n-alkanes-based thermal energy storage techniques. In this study, the thermal properties of n-alkanes (C₁₈H₃₈-C₂₂H₄₆), such as thermal stability, thermal conductivity, phase transition temperature and enthalpy were systematically studied by different thermal analysis and calorimetry methods, and compared with previous results. Thermodynamic property of these n-alkanes was studied in a wide temperature range from 1.9 K to 370 K using a combined relaxation (Physical Property Measurement System, PPMS), differential scanning and adiabatic calorimetry method, and the corresponding thermodynamic functions, such as entropy and enthalpy, were calculated based on the heat capacity curve fitting. Most importantly, the heat capacities and related thermodynamic functions of n-heneicosane and n-docosane were reported for the first time in this work, as far as we know. This research work would provide accurate and reliable thermodynamic properties for further study of n-alkanes-based PCMs for thermal energy storage applications.     

Financial and energy costs of supplying woody biomass to conversion sites

A series of short rotationPopulus plantations involving four management strategies were evaluated in tandem with alternate harvest and storage strategies to determine the least cost method for supplying biomass to conversion sites. All inputs were itemized on both a financial and energy basis to establish the unit output costs for commercial-scale systems. The control strategy had the lowest production costs, at $28.74 Mg^-1 (ovendry), and 5,455 MJ Mg^-1(OD). The addition of harvest and storage costs, based on existing and proposed technologies within the forest product industries, increased the total supply cost for biomass to $59.61 Mg^-1(OD) and 7,233.1 MJ Mg^-1(OD). On a financial basis, the proposed cost was 17% more expensive than a projected price for biomass from an ethanol plant and was also higher than the general prices for aspen from domestic markets. However, on an energy basis, the gross heat of combustion for thePopulus biomass was 2.7 times greater than its total energy costs.     

Fluorinated cellobiose and maltose as stand-ins for energy surface calculations

To better understand computational predictions of disaccharide conformations, ϕ,ψ maps were constructed for two analogs in which all hydroxyl groups were replaced with fluorine atoms (F-cellobiose and F-maltose). These molecules do not permit hydrogen bonding but should give better steric representation than analogs in which hydrogen atoms replaced exo-cyclic groups. Hartree Fock and B3LYP density functional quantum mechanics (QM) theory were used. The preferred ring shape for fluorinated glucose depends on the level of QM theory, but over the limited ϕ,ψ space that was studied, the rings remained in the ⁴C₁ form. Also, fluorine atoms are remote enough that they do not affect the torsional energies for the glycosidic bonds. F-Cellobiose maps were predictive of the conformations in crystals, but F-maltose maps were less so. The QM F-cellobiose map and an MM4::QM hybrid map for cellobiose itself were similar. However, the hybrid maltose map had many more experimental conformations within its 2-kcal/mol contour than did the QM F-maltose map. The apparent mean strength of an intra-molecular, inter-residue hydrogen bond is about 3 kcal/mol, based on the energy for many of the hydrogen bonded maltose structures on the F-maltose map. The F-maltose map was similar to a new QM map for an analog of maltose in which all hydroxyl groups were replaced with hydrogen atoms.     

Synthesis,characterization and computational evaluation of bicyclooctadienes towards molecular solar thermal energy storage

Molecular solar-thermal energy storage (MOST) systems are based on photoswitches that reversibly convert solar energy into chemical energy. In this context, bicyclooctadienes (BODs) undergo a photoinduced transformation to the corresponding higher energy tetracyclooctanes (TCOs), but the photoswitch system has not until now been evaluated for MOST application, due to the short half-life of the TCO form and limited available synthetic methods. The BOD system degrades at higher temperature via a retro-Diels–Alder reaction, which complicates the synthesis of the compounds. We here report a cross-coupling reaction strategy that enables an efficient synthesis of a series of 4 new BOD compounds. We show that the BODs were able to switch to the corresponding tetracyclooctanes (TCOs) in a reversible way and can be cycled 645 times with only 0.01% degradation. Half-lives of the TCOs were measured, and we illustrate how the half-life could be engineered from seconds to minutes by molecular structure design. A density functional theory (DFT) based modelling framework was developed to access absorption spectra, thermal half-lives, and storage energies which were calculated to be 143–153 kJ mol⁻¹ (0.47–0.51 MJ kg⁻¹), up to 76% higher than for the corresponding norbornadiene. The combined computational and experimental findings provide a reliable way of designing future BOD/TCO systems with tailored properties.

Molecular solar-thermal energy storage (MOST) systems are based on photoswitches that reversibly convert solar energy into chemical energy.     

In-situ formed hierarchical transition metal oxide nanoarrays with rich antisite defects and oxygen vacancies for high-rate energy storage devices

Developing transition metal oxides(TMOs) with high energy, power, and long cycle lifetime for electric energy storage devices remains a critical challenge to date. Herein, we demonstrate a facile method that enables in-situ transformation of nickel cobalt oxide nanowire arrays(Ni Co O NWA) into hierarchical nanowire-nanosheet arrays(ac-Ni Co O NWSA) for enhanced energy storage properties. More specifically,the method leads to formation of atomically thin nanosheets(only 2.0 nm) and creates abund...     

Application of PCM thermal energy storage system to reduce building energy consumption

The building sector is known to make a large contribution to total energy consumption and CO₂ emissions. Phase change materials (PCMs) have been considered for thermal energy storage (TES) in buildings. They can balance out the discrepancies between energy demand and energy supply, which are temporally out of phase. However, traditional PCMs need special latent storage devices or containers to encapsulate the PCM, in order to store and release the latent heat of the PCM. The proper design of TES systems using a PCM requires quantitative information and knowledge about the heat transfer and phase change processes in the PCM. In Korea, radiant floor heating systems, which have traditionally been used in residential buildings, consume approximately 55% of the total residential building energy consumption in heating. This article reviews the development of available latent heat thermal energy storage technologies and discusses PCM application methods for residential building using radiant floor heating systems with the goal of reducing energy consumption.     

Retardation (Casimir) energy shifts for Rydberg helium-like low-Z ions

The development of storage rings and electromagnetic traps for heavy charged particles is opening up new regimes of atomic physics, including, in particular, spectroscopic studies of Rydberg helium-like ions — with nuclear chargeZ, one electron in the 1s state, and one electron in a near-hydrogenic state of highn andl <n, withn andl the principal and orbital quantum numbers, respectively. We consider the possibility of detecting energy shifts due to retardation, ΔE _ret (n,l), Casimir-like effects. These are quantum electrodynamic (QED) retardation effects associated with the finite speed of light. (As opposed to basically kinematic and dynamic QED effects for small quantum numbersn andl, the appropriate expansion parameter forn andl large for retardation QED corrections is notZ(e ²/?c) but [(Z ? 1)/n ² Z ²](?c/e ²).) We wish to provide some orientation to those planning experiments in the area, with regard to the choices ofn,l, andZ most likely to be able to generate a high-precision confirmation of a retarded interaction. To do so, we provide extensive tables of estimates, for 1s,nl states, of ΔE _ret(n,l), of radiative widths, and ofE, the spin-independent (“electric” fine structure) energy in the absence of retardation shifts, for (nuclear spin zero) ions withZ=2, 6, 8, 16 and 20. These ions might be experimentally accessible in storage rings, and theZ's are low enough that virtual pair production effects may not yet be significant. There is also a brief survey of possible experimental techniques.     

A study of the interaction energy between a glycoluril molecular clip and dihydroxybenzenes or diaminobenzenes: a justification for easy separation by affinity chromatography

Theoretical calculations were performed to determine the interaction energy between a glycoluril (GL) molecular clip and hydroxybenzenes (HBs) and aminobenzenes (ABs). The theoretical calculations on the GL and its interactions were carried out using the hybrid functional closed-shell RB3LYP and the 6-31G* basis set, employing gaussian 03. The stability in energy of the guest inside the GL, ΔE_T(1), was in the following order: m-DHB-GL > o-DHB-GL > m-THB-GL > m-DAB-GL > o-THB-GL. The geometric parameters, in particular the bond lengths are discussed for the host molecule GL and guest molecules DHB and DAB and their parameters are compared with the host-guest molecules DHB-GL and DAB-GL, respectively.     

Plasma treated carbon paper electrode greatly improves the performance of iron-hydrogen battery for low-cost energy storage

A novel iron-hydrogen battery system, whose Fe³⁺/Fe²⁺cathode circumvents slowly dynamic oxygen reduction reaction and anode is fed with clean and cordial hydrogen, is systematically investigated. The maximum discharge power density of the iron-hydrogen battery reaches to 96.0 m W/cm2 under the room temperature. The capacity reaches to 17.2 Ah/L and the coulombic and energy efficiency are achieved to99% and 86%, respectively, during the galvanostatic charge-discharge test. M...     

Hydrothermally synthesized highly efficient binary silver strontium sulfide (AgSrS) for high-performance supercapattery applications

The increasing demand for sustainable energy has diverted researchers’ intentions toward electrochemical storage devices. This research aims to combine supercapacitors’ characteristics with batteries to create high-performance hybrid energy storage devices. The hydrothermal approach is used to synthesize silver sulfide (Ag₂S), strontium sulfide (SrS), and their composite silver strontium sulfide (AgSrS). XRD is used to evaluate the crystallinity, SEM is used to study the surface morphology, and XPS is used to determine the elemental composition of AgSrS. The BET measurements show a higher surface area of 22.23 m²g⁻¹ for AgSrS. The highest achieved specific capacity with AgSrS is 494.5 C g⁻¹ (137.36 mAh-g⁻¹). The best-tuned material, AgSrS, is then used as the anode in a powered hybrid device with activated carbon (A.C.) as the cathode terminal. This device provides an energy of 26.32 Wh-kg⁻¹ at a power of 800 W kg⁻¹. The device was also put through a durability test, which included 5000 consecutive cycles. After 5000 cycles, a columbic efficiency of 82% was achieved, with 96% capacity retention. This research shows that the composite material AgSrS can be utilized commercially for hybrid energy storage devices in the future.

     

Two-dimensional hybrid nanomaterials derived from MXenes(Ti_3C_2T_x)as advanced energy storage and conversion applications

The development of two-dimensional hybrid nanomaterial derived from MXenes as high performance electrode material is the key component for the advanced ene rgy storage and conversion systems.In the past decades,MXene derived nanomaterials have attracted greatly interest in scientific activity and potential applications because of their unique synergistic properties such as high thermal stability,excellent electrical conductivity,large surface area,easy to handle and outstanding electro and photo chemical properties.This review is focused on the synthesis of hybrid nanomaterials from MXene(Ti_3C_2T_x) for renewable energy conversion and storage application including hydrogen evolution reaction,supercapacitor,lithium-ion batteries and photocatalysis.Finally,we also summarized the prospect and opportunities of novel two-dimensional hybrid nanomaterials derived MXene(Ti_3C_2T_x) fo r futuristic sustainable energy technology.     

Efficient solid-state photoswitching of methoxyazobenzene in a metal–organic framework for thermal energy storage

Efficient photoswitching in the solid-state remains rare, yet is highly desirable for the design of functional solid materials. In particular, for molecular solar thermal energy storage materials high conversion to the metastable isomer is crucial to achieve high energy density. Herein, we report that 4-methoxyazobenzene (MOAB) can be occluded into the pores of a metal–organic framework Zn₂(BDC)₂(DABCO), where BDC = 1,4-benzenedicarboxylate and DABCO = 1,4-diazabicyclo[2.2.2]octane. The occluded MOAB guest molecules show near-quantitative E → Z photoisomerization under irradiation with 365 nm light. The energy stored within the metastable Z-MOAB molecules can be retrieved as heat during thermally-driven relaxation to the ground-state E-isomer. The energy density of the composite is 101 J g⁻¹ and the half-life of the Z-isomer is 6 days when stored in the dark at ambient temperature.

4-Methoxyazobenzene can be occluded into the pores of a MOF and show near-quantitative E → Z photoisomerization under irradiation with 365 nm light. The energy density of the composite is 101 J g⁻¹ and the half-life of the Z-isomer is 6 days.     

High-performance nitrogen and sulfur co-doped nanotube-like carbon anodes for sodium ion hybrid capacitors

Sodium ion hybrid capacitors are of great concern in large-scale and cost-effective electrical energy storage owing to their high energy and power densities, as well as natural abundance and wide distribution of sodium. However, it is difficult to find a well-pleasing anode material that matches the high-performance cathode materials to achieve good energy and power output for sodium ion hybrid capacitors. In this paper, nitrogen and sulfur co-doped nanotube-like carbon prepared by a simple carbonization process of high sulfur-loaded polyaniline nanotubes is introduced as the anode. The assembled sodium ion half cell based on the optimal nanotube-like carbon delivers a high reversible capacity of ∼304.8 mAh/g at 0.2 A/g and an excellent rate performance of ∼124.8 mAh/g at 10 A/g in a voltage window of 0.01–2.5 V (versus sodium/sodium ion). For the hybrid capacitors assembled using the optimal nanotube-like carbon as the anode and high-capacity activated carbon as the cathode, high energy densities of ∼100.2 Wh/kg at 250 W/kg and ∼50.69 Wh/kg at 12,500 W/kg are achieved.     

A Bifunctional Hybrid Electrocatalyst for Oxygen Reduction and Oxygen Evolution Reactions: Nano-Co3O4-Deposited La0.5Sr0.5MnO3 via Infiltration

For rechargeable metal–air batteries, which are a promising energy storage device for renewable and sustainable energy technologies, the development of cost-effective electrocatalysts with effective bifunctional activity for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) has been a challenging task. To realize highly effective ORR and OER electrocatalysts, we present a hybrid catalyst, Co₃O₄-infiltrated La_0.5Sr_0.5MnO_3-δ (LSM@Co₃O₄), synthesized using an electrospray and infiltration technique. This study expands the scope of the infiltration technique by depositing ~18 nm nanoparticles on unprecedented ~70 nm nano-scaffolds. The hybrid LSM@Co₃O₄ catalyst exhibits high catalytic activities for both ORR and OER (~7 times, ~1.5 times, and ~1.6 times higher than LSM, Co₃O₄, and IrO₂, respectively) in terms of onset potential and limiting current density. Moreover, with the LSM@Co₃O₄, the number of electrons transferred reaches four, indicating that the catalyst is effective in the reduction reaction of O₂ via a direct four-electron pathway. The study demonstrates that hybrid catalysts are a promising approach for oxygen electrocatalysts for renewable and sustainable energy devices.