Magnesium-zinc-graphene oxide nanocomposite scaffolds for bone tissue engineering

The aim of this study was to fabricate and evaluate magnesium-zinc-graphene oxide nanocomposite scaffolds for bone tissue engineering. For this reason, Mg-6Zn, Mg-6Zn-1GO, and Mg-6Zn-2GO scaffolds were fabricated by the powder metallurgy method. The porosity level and also the pore size of the scaffolds were evaluated by SEM which varied from 40 to 46% and 200 to 500 μm, respectively. The chemical composition and microstructure of the scaffolds were characterized by XRD and SEM equipped with EDS; the presence of Mg, Zn, C, and O elements in the structure of the scaffolds was shown. Also, the elemental map confirmed the existence of magnesium, zinc, carbon, and oxygen in the structure of the scaffold. The mechanical properties of the scaffolds were investigated by the compression test; the results showed that by the addition of graphene oxide to the structure, the compressive strength of the samples increased from 5 to 8 MPa. Electrochemical corrosion polarization tests were conducted to evaluate the corrosion resistance of the samples immersed in simulated body fluid (SBF). Furthermore, the biodegradability of the scaffolds was determined by immersion of the samples in phosphate-buffered saline (PBS). The results demonstrated that the polarization resistance value and the corrosion rate for different formulations including Mg-6Zn, Mg-6Zn-1GO, and Mg-6Zn-2GO were 41.58, 35.48, and 55.40 Ω.cm² followed by 10.60, 14.83, and 9.06 mm.year^?1, respectively. Based on the results, the Mg-6Zn-2GO formulation presented the best corrosion resistance among the samples were investigated, which confirmed the results of the immersion test. Moreover, the MTT assay proved that the extract of Mg-6Zn-2GO scaffolds was not cytotoxic in contact with L-929 cells which validated the studied scaffolds for bone tissue applications.     

Biomimetic strengthening polylactide scaffold materials for bone tissue engineering

In this paper, a new polylactide (PLA)-based scaffold composite by biomimetic synthesis was designed. The novel composite mainly consists of nano-hydroxyapatite (n-HA), which is the main inorganic content in natural bone tissue for the PLA. The crystal degree of the n-HA in the composite is low and the crystal size is very small, which is similar to that of natural bone. The compressive strength of the composite is higher than that of the PLA scaffold. Using the osteoblast culture technique, we detected cell behaviors on the biomaterial in vitro by SEM, and the cell affinity of the composite was found to be higher than that of the PLA scaffold. The biomimetic three-dimensional porous composite can serve as a kind of excellent scaffold material for bone tissue engineering because of its microstructure and properties. Translated from Journal of Hunan University (Natural Sciences), 2006, 33(2) (in Chinese)     

Ordered mesoporous materials in the context of drug delivery systems and bone tissue engineering

Chemistry, materials science and medicine are research areas that converge in the field of drug delivery systems and tissue engineering. This paper tries to introduce an example of such an interaction, aimed at solving health issues within the world of biomaterials. Ordered mesoporous materials can be loaded with different organic molecules that would be released afterwards, in a controlled fashion, inside a living body. These materials can also react with the body fluids giving rise to carbonated nanoapatite particles as the products of such a chemical interaction; these particles, equivalent to biological apatites, enable the regeneration of bone tissue.     

MOFs/水凝胶复合材料的制备及其应用研究

金属有机框架(MOFs)具有大量的孔隙结构和活性位点,在气体吸附、催化、医疗等领域均发挥了巨大的作用。MOFs是晶体粉末,具有脆性较大、在水中易分解和不易回收等缺点,从而限制了其应用。通过MOFs与柔性高分子的复合,特别是与水凝胶的复合,极大地改善了复合材料的柔顺性、可回收和可加工性等特性,进一步拓宽了MOFs的应用领域。本文详细阐述了基于水凝胶MOFs原位生成法、MOFs /水凝胶同时生成法和水凝胶包裹MOFs法等三种不同方法制备MOFs/水凝胶复合材料的研究进展,并对上述三种制备方法的特点及其产物特征进行了总结,进一步归纳了复合材料在生物医药、催化、废水处理和气体吸附等领域的应用。最后,对MOFs/水凝胶复合材料制备方法的改进和复合材料应用前景进行了深入讨论和展望。     

Sodium alginate/magnesium oxide nanocomposite scaffolds for bone tissue engineering

A simple 2‐step method, consisting of film casting and polyvinyl alcohol leaching, is proposed to prepare magnesium oxide (MO) nanoparticle‐reinforced sodium alginate scaffolds with right properties for bone tissue engineering. The cytocompatibility of the as‐prepared scaffolds was also evaluated using the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium‐bromide yellow tetrazole assay test, wherein chondrocyte cells had been considered as target cells. According to the results, the ensuing sodium alginate nanocomposites, containing 4‐wt% MO nanoparticles, demonstrated the highest physical and mechanical properties after leaching step. The Young modulus of sodium alginate/4‐wt% MO was improved about 44%, in comparison with that of the pure alginate sample. Furthermore, incorporating MO nanoparticles up to 4 wt% controlled the liquid uptake capacity of scaffolds vis‐à‐vis the resultant pure sodium alginate sample. Moreover, with increasing the nanoparticle content, the antibacterial properties of scaffolds enhanced, but their degradation rates under in vitro conditions tapered off. With the introduction of 3‐ and 4‐wt% MO, the average diameter of the bacterial zone of the scaffold samples reduced to less than 10 mm², suggesting an insensitive antimicrobial performance, compared with the pure sodium alginate and the samples with 1‐ and 2‐wt% MO content, which exhibit antimicrobial sensitivity. 3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium‐bromide assay test also revealed the cultivated chondrocyte cells on the 4‐wt% MO nanoparticle‐reinforced scaffold possessed better interaction as well as appropriate cell attachment and proliferation than the pristine sodium alginate sample.     

中空MOFs材料制备及电催化应用的研究进展

水分裂、金属-空气电池和燃料电池等能源转换技术对解决未来的能源危机和环境问题至关重要.氧还原反应(ORR)、氧析出反应(OER)和氢析出反应(HER)作为其核心反应,存在反应动力学速率较慢的问题,因此,开发研制高效的非贵金属电催化剂具有重要意义.金属有机骨架(MOFs)材料因具有高度可调的组成和多孔晶体结构,在不同的应用领域引起了越来越多的关注.中空MOFs纳米材料具有MOFs材料高度可调的组成和结构优势,又具有中空结构纳米材料的优点(如更快的物质传输、更丰富的孔隙率、灵活多变的活性组分、更多的暴露活性位点及对苛刻条件的更好相容性等),在电催化领域显现出巨大的应用潜力.本文对近几年来基于中空结构MOFs材料的制备及在电催化方面应用的研究进展进行了综合评述,并对该领域面临的挑战和发展前景进行了总结和展望.     

Synthesis of bioceramic scaffolds for bone tissue engineering by rapid prototyping technique

This study presents a novel rapid prototyping process to fabricate silicate/hydroxyapatite (HA) bone scaffolds for tissue engineering applications. The HA particles are embedded in the gelled silica matrix to form a green part of bioceramic bone scaffold after processing by selective laser sintering. The composition of the bioceramic scaffold is in the series of SiO₂·P₂O₅·CaO. Results indicate that the proposed process could fabricate a multilayer hollow shell structure with brittle property but sufficient integrity for handling prior to post-processing. The fabricated bone scaffold models had a surface finish of 25 μm, a dimensional shrinkage of 16 %, a maximum bending strength of 4.7 MPa, and an apparent porosity of 28 % under the laser energy density of 1.5 J/mm². In vitro bioactivity evaluation by optical density value using a microculture tetrazolium test assay revealed that the bioceramic bone scaffolds were suitable for cell culture, demonstrating their application in tissue engineering.     

双金属MOFs及其衍生物在电化学储能领域中的应用

双金属有机骨架及其衍生物一方面具有单金属有机骨架孔道丰富、比表面积大、结构可调、活性位点丰富等特点,另一方面具有双组分与多孔结构之间的协同效应,因而受到了研究人员的密切关注,在储能、催化、分离、传感器、医药、气体存储等领域广泛应用。和单金属MOFs类似,双金属MOFs的导电性不佳、结构易坍塌,这极大地限制了其在电化学储能中的应用。通过对双金属MOFs进行热处理,易得到分布均匀的多孔碳@双金属氧化物/硫化物/磷化物/硒化物等衍生物,不仅保持了独特的多孔结构,而且提高了材料的导电性和结构稳定性,有利于在电化学储能中的应用。因此,本文从双金属MOFs中的主要金属离子入手,综述了双金属MOFs及其衍生物用于超级电容器、锂离子电池、钠离子电池、金属空气电池等电化学储能器件的最新应用进展。在此基础上,总结了双金属MOFs在电化学储能应用中的优势,并对其制备、作用机理和后处理研究提出了建议。     

金属-有机框架材料在光电催化水分解领域的研究进展

光催化分解水是将太阳能转化为化学能的有效手段之一. 相比于粉末光催化, 采用H型电解池的光 电催化方法具有材料选择范围大、 载流子迁移和分离效率高、 电极易于回收等优点. 近年来, 金属有机框架 材料(MOFs)在光电催化水分解领域得到越来越多的应用. 相比于传统无机催化剂, MOFs光电极具有比表面积大、 结构易于调控等独特优势. 本文按照MOFs的应用形式分为纯MOFs、 MOFs与其它催化剂的复合结构和MOFs衍生物3类, 总结了近年来MOFs在光电催化水分解领域的研究现状和进展, 介绍了光催化/电催化领域的部分典型研究成果, 最后讨论了MOFs在光电催化水分解领域研究的重点和热点, 并对其未来发展做出了展望.     

Light-harvesting metal-organic frameworks (MOFs): efficient strut-to-strut energy transfer in bodipy and porphyrin-based MOFs

A pillared-paddlewheel type metal-organic framework material featuring bodipy- and porphyrin-based struts, and capable of harvesting light across the entire visible spectrum, has been synthesized. Efficient-essentially quantitative-strut-to-strut energy transfer (antenna behavior) was observed for the well-organized donor-acceptor assembly consituting the ordered MOF structure.     

MOFs传感器在癌症及其生物标志物检测中的应用

癌症是世界上最致命的疾病之一,因此癌细胞的有效捕获和敏感检测对基础研究以及临床诊断和治疗都具有重要意义.基于金属有机骨架(MOFs)的催化活性和固有的发光性能等特点,MOFs已被成功地开发为传感平台实现对癌症及其标志物的检测.综述了基于MOFs的电化学、荧光、电化学发光、比色传感器在癌细胞及核酸、蛋白质等生物标志物检测...     

Fabrication and characterization of chitosan-silk fibroin/hydroxyapatite composites via in situ precipitation for bone tissue engineering

Homogeneous chitosan-silk fibroin/hydroxyapatite(CS-SF/HA) composites were prepared by in situ precipitation method driven by a multiple-order template. The morphology of the composites was investigated by scanning electron microscope(SEM) and transmission electron microscope(TEM). The compositional analysis was carried out by X-ray diffraction analysis(XRD) and Fourier transformed infrared spectroscopy(FTIR). The mechanical properties and biocompatibility of the composites were also determined. The results indicated that the inorganic particles of uniform size(50 nm) were well-dispersed among the CS-SF matrices. The compressive modulus of the CS-SF/HA composites was enhanced with the increasing amount of SF. The in vitro results suggested that the MC3T3-E1 osteoblast-like cells on CS-SF/HA composite disks displayed strong bonding and spreading, and the cell proliferation cultured on each composite disk increased throughout the culture period for up to 7 days. Especially, the samples with higher content of SF had much better biological properties. The evidences proved that the CS-SF/HA composites possessed excellent biocompatibility. By using the freeze-drying technique, hierarchical porous scaffolds with pores ranging from 50 μm to 200 μm were obtained. This work presented the advantages of in situ precipitation method to prepare the organic/inorganic composites, and a multiple-order template was introduced in the system to improve the properties of the composites by combining the merits of each organic template.     

Photo-crosslinking copolymers based polyanhydride and 1G polyamidoamine-methacrylamide as bone tissue engineering: Synthesis, characterization, and in vitro degradation

In the past decade, Biodegradable materials that are capable of in situ formation have attracted increased attention for use in restorative orthopedic devices. In this communication, the surface erosion biodegradable polymers derived from 1.0G-polyamidoamine-double bond (PAMAM-DB) and methacrylated sebacic anhydrides (MSA) were evaluated over 2 months period under physiological conditions. Rectangular shaped samples were prepared by crosslinking the components using both chemical and photo initiators and exposure to UV light. The effects of PAMAM-DB: MSA ratio on local pH, water uptake, mass loss, and mechanical properties were explored. Polymers were characterized by ¹H NMR, ¹³C NMR, FT-IR, compressive strength testing and SEM. It is found that copolymer with 50-60% PAMAM-DB (mass fraction) show more excellent mechanical properties compared with other formulations. Copolymers degraded mainly by surface erosion but the bulk erosion pattern also appeared at the initial time of degradation for formulation 30% and 40%. The material was expected to be useful for drug controlled delivery, tissue engineering scaffold and other biomedical applications.     

The potential of biomimetic nanofibrous electrospun scaffold comprising dual component for bone tissue engineering

Oils play a putative choice for alleviating various symptoms associated with bone-related disorders. In this present study, polyurethane (PU) scaffold encompassing with Mahua oil (MO) and propolis (PP) were developed using the electrospinning technique. Morphological analysis showed the reduction in the diameter of the electrospun scaffold with blending of MO and MO/PP into the PU matrix. The strong interactions between PU, MO, and PP were evident through the infrared spectrum and thermal analysis. The wettability results showed the hydrophobic nature in electrospun PU/MO scaffold and hydrophilic behavior in electrospun PU/MO/PP scaffold. Mechanical testing indicated the enhancement in the strength of the PU due to the addition of MO and PP. Moreover, the fabricated scaffolds exhibited nontoxicity, low hemoglobin release and improved blood clotting time as evident in the coagulation studies. The cell proliferation studies showed the enhanced fibroblast cell adhesion in the developed nanocomposites than the pristine PU. Hence, the fabricated PU scaffolds blended with MO and PP having desirable properties can serve as a valuable candidate for bone tissue repair.     

离子液体功能化金属/共价-有机框架材料在催化反应中应用

离子液体（ILs）功能化的金属有机框架（MOFs）和共价有机框架（COFs）材料兼具离子液体和MOFs/COFs的优点，是一种极具潜力的复合催化材料。MOFs和COFs材料固定的孔结构及较大的比表面积为负载高分散催化中心提供了天然的物理空间；多孔结构促使催化剂与反应物充分接触；丰富的孔道有利于运输催化反应底物和产物，进而实现催化反应的高效进行。特别是离子液体片段的引入，可以作为催化活性中心的配体（稳定剂）或分散剂，同时能够有效改善MOFs和COFs材料孔道和活性中心周围的微环境。此外，还可以充分利用离子液体片段在适当的反应条件下转化为氮杂环卡宾配体的特点，在MOFs和COFs材料中引入氮杂环卡宾有机金属配合物。因此，我们对近几年来离子液体功能化的MOFs或COFs催化体系在CO2环加成、CO2还原、C-C偶联、羰基化以及其它有机转化反应中的研究应用进行简要综述。并对复合材料在催化领域的发展进行总结和展望。     

MOFs在不饱和醛选择加氢中的应用研究进展

不饱和醛多相催化选择加氢制备不饱和醇常常被选作C=O键选择性加氢的代表性反应,长期以来一直备受关注,然而如何获得兼具高活性及高选择性的催化剂依然具有很大挑战.近年来,由于金属有机骨架(Metal-organic frameworks MOFs)材料具有的独特性能,应用在加氢领域的研究越来越多,常用做催化剂载体或直接作为...     

手性金属有机框架材料(MOFs)的合成及应用

手性材料一直以来都是科学工作者研究的重点,尤其是在药物和生物体中的应用方面.手性金属有机框架材料(MOFs)具有迷人的拓补结构和潜在的应用价值,受到了人们的广泛关注.主要从它的合成和应用方面做了简要的介绍.     

In vitro blood compatibility and bone mineralization aspects of polymeric scaffold laden with essential oil and metallic particles for bone tissue engineering

Bone tissue engineering scaffolds necessities appropriate physicochemical and mechanical properties to support its renewal. Electrospun scaffolds have been used unequivocally in bone tissue restoration. The main intention of this research is to develop electrospun polyurethane (PU) scaffold decorated with metallic particles and essential oil with advanced properties to make them as a putative candidate. The nanocomposite scaffold exhibited appropriate wettability and suitable fiber diameter compared to the polyurethane scaffold. Interaction of the added constituents with the polyurethane was corroborated through hydrogen bonding formation. Tensile strength of the composites was enhanced compared to the polyurethane scaffold. Thermal analysis depicted the lower weight loss of the composite scaffold than the pristine PU. Blood coagulation was significantly delayed and also the composite surface rendered safe interaction with red blood cells. In vitro toxicity testing using fibroblast cells portrayed the nontoxic behavior of the fabricated material. The above-said advanced properties of the composite scaffold can be warranted for bone tissue engineering application.     

Polymers in orthopedic surgery and tissue engineering: From engineering materials to smart biofunctionalization of a surface

Polymeric materials are important for biomedical applications. Nevertheless, during the last few decades, the requirements on the used polymers have experienced significant changes. In the present review, the data illustrating the history of application of polymers in orthopedic surgery and tissue engineering are systemized and generalized. Special attention is given to the discussion of new problems which could be solved through creation of smart biologically functional polymeric structures able to control the behavior of cells.     

Porous nano-minerals substituted apatite/chitin/pectin nanocomposites scaffolds for bone tissue engineering

In the current study, a porous 3D scaffold using Gallium-Apatite/chitin/pectin (Ga-HA/C/P) nanocomposites scaffolds (NCS) were fabricated by freeze-drying process with applications in orthopedics (bone tissue engineering). Various NCSs (0%, 30%, 50 and 70%) were prepared and characterized for its chemical structure, crystalline phase, surface texture by using various techniques such as FT-IR, XRD and SEM-EDX, respectively. The analyses of physicochemical properties proved that the formulated scaffolds were highly porous, and mechanically stable with superior density. The nanocomposite scaffolds also presented with increased swelling ability, lower biodegradation rate and higher mechanical strength. Further, biocompatibility and cytotoxicity of Ga-HA/C/P nanocomposite scaffolds were studied using NIH3T3 cells and MG-63 cells revealed no toxicity and cells attached and proliferated on scaffolds. Further implantation of prepared NCS showed mature bone formation through formation of new bone cells and osteoblast differentiation. Also, Ga-HA/C/P nanocomposites scaffolds proved to be more effective than chitin-pectin composite scaffolds. Taking results together it can be inferred that the prepared nanocomposite scaffolds possesses the prerequisites and showed great potential for treating orthopedic applications.