Microwave sample-digestion procedure for determination of arsenic in moss samples using electrothermal atomic absorption spectrometry and inductively coupled plasma mass spectrometry

Arsenic in moss samples was determined by electrothermal atomic absorption spectrometry (ETAAS) after microwave-assisted sample digestion. Two different sample masses (500 mg and 1000 mg) and three different microwave ovens were used in the digestion. There was a slight difference in the digestion efficiency, as determined by the residual carbon concentrations of 500 mg digested samples, between the microwave ovens. The arsenic results obtained for moss reference samples were, in most cases, satisfactory. However, phosphorus was found to have a reducing influence on the arsenic peak area in the ETAAS determination. According to the results, it was not possible to reduce the phosphorus interference by increasing the amount of Mg(NO(3))(2) in the Pd-Mg chemical modifier. The arsenic results obtained by ETAAS were compared to those obtained by inductively coupled plasma mass spectrometry (ICP-MS).     

Comparative study of atomic fluorescence spectroscopy and inductively coupled plasma mass spectrometry for mercury and arsenic multispeciation

Mercury and arsenic are two elements of undoubted importance owing to their toxic character. Although speciation of these elements has been developed separately, in this work for the first time the speciation of As and Hg using two atomic fluorescence detectors in a sequential ensemble is presented. A coupling based on the combination of high-performance liquid chromatography (where mercury and arsenic species are separated) and two atomic fluorescence detectors in series, with several online treatments, including photooxidation (UV) and hydride generation, has allowed the determination of mercury and arsenic compounds simultaneously. The detection limits for this device were 16, 3, 17, 12 and 8 ng mL^–1 for As^III, monomethylarsinic acid, As^V, Hg²⁺ and methylmercury, respectively. This coupling was compared with an analogous one based on inductively coupled plasma–mass spectrometry (ICP-MS) detection, with detection limits of 0.7, 0.5, 0.8, 0.9 and 1.1 ng mL^–1, respectively. Multispeciation based on ICP-MS exhibits better sensitivity than the coupling based on tandem atomic fluorescence, but this second device is a very robust system and exhibits obvious advantages related to the low cost of acquisition and maintenance, as well as easy handling, which makes it a suitable system for routine laboratories.     

Experimental studies for the characterization of analytical performance in axially-observed inductively coupled plasma atomic emission spectrometry

Investigations were carried out on the optimization of excitation and projection conditions of the axially-observed inductively coupled plasma (ICP) concerning simultaneous measurements. For minimized background equivalent concentration (BEC) it can be shown that the optimal excitation conditions of the atomic and ionic lines also vary in the case of axial plasma observation. A relationship was confirmed between the high frequency power and the excitation energy of the analytical lines. The main contribution of this work is the displacement of the axial viewing inductively coupled plasma by means of an x,y,z sliding carriage.The displacement showed that under the selected experimental conditions the point of observation is spatially identical for all analytical lines. Received: 30 May 1997 / Revised: 20 November 1997 / Accepted: 25 November 1997     

Experimental studies for the characterization of analytical performance in axially-observed inductively coupled plasma atomic emission spectrometry

Investigations were carried out on the optimization of excitation and projection conditions of the axially-observed inductively coupled plasma (ICP) concerning simultaneous measurements. For minimized background equivalent concentration (BEC) it can be shown that the optimal excitation conditions of the atomic and ionic lines also vary in the case of axial plasma observation. A relationship was confirmed between the high frequency power and the excitation energy of the analytical lines. The main contribution of this work is the displacement of the axial viewing inductively coupled plasma by means of an x,y,z sliding carriage.The displacement showed that under the selected experimental conditions the point of observation is spatially identical for all analytical lines. Received: 30 May 1997 / Revised: 20 November 1997 / Accepted: 25 November 1997     

The determination of mercury in whole blood and urine by inductively coupled plasma mass spectrometry

An inductively coupled mass spectrometric (ICP-MS) method for the determination of mercury in whole blood and urine was developed. Gold and dichromate in hydrochloric acid were evaluated as agents to reduce mercury spray chamber memory. Dichromate with hydrochloric acid was found to be superior to gold. We evaluated the rapid introduction of sample to promote equilibrium and the rapid introduction of wash solutions after the sample analyses to minimize mercury memory. This ‘fast pump’ mode (2.5 ml/min) was used for 20 s at the beginning and end of each sample-wash cycle. The mercury detection limit is 0.15 μg/l in the original sample before dilution. Regressions and correlation coefficients for ICP-MS vs. target concentrations for interlaboratory comparison samples from the Centre de Toxicologie du Quebec were: whole blood: y=1.0x−0.6; r=0.9801; n=27 and urine: y=0.84x+8; r=0.9915; n=42. Patient samples were analyzed by ICP-MS and cold vapor atomic absorption spectrometry (CVAAS). Regressions and correlations for patient samples were: urines: y=0.93x+1; r=0.8763; n=456 and whole blood: y=1.1x+0.2; r=0.9357; n=251. ICP-MS correlation with CVAAS for 29 urine samples containing 15–150 μg Hg/specimen was: y=0.94x+4; r=0.9864.     

Age determination of plutonium using inductively coupled plasma mass spectrometry

The age of plutonium is defined as the time since the last separation of the plutonium isotopes from their daughter nuclides. In this paper, a method for age determination based on analysis of ²⁴¹Pu/²⁴¹Am and ²⁴⁰Pu/²³⁶Pu using ICP-SFMS is described. Separation of Pu and Am was performed using a solid phase extraction procedure including UTEVA, TEVA, TRU and Ln-resins. The procedure provided separation factors adequate for this purpose. Age determinations were performed on two plutonium reference solutions from the Institute for Reference Materials and Measurements, IRMM081 (²³⁹Pu) and IRMM083 (²⁴⁰Pu), on sediment from the Marshall Islands (reference material IAEA367) and on soil from the Trinity test site (Trinitite). The measured ages based on the ²⁴¹Am/²⁴¹Pu ratio corresponded well with the time since the last parent-daughter separations of all the materials. The ages derived from the ²³⁶U/²⁴⁰Pu ratio were in agreement for the IRMM materials, but for IAEA367 the determination of ²³⁶U was interfered by tailing from ²³⁸U, and for Trinitite the determined age was biased due to formation of ²³⁶U in the detonation of the “Gadget”.     

The determination of selenium in serum and urine by inductively coupled plasma mass spectrometry: comparison with Zeeman graphite furnace atomic absorption spectrometry

An inductively Coupled Plasma Mass Spectrometric (ICPMS) method for the determination of selenium in both serum and urine is described. ⁷⁸Se is used analytically in spite of ³⁸Ar⁴⁰Ar isobaric interference at mass 78. Initially ⁸²Se was monitored but, limited isotope abundance and therefore limited detection capability for urine selenium precluded continued use. An ethanol–Triton X-100-nitric acid diluent was used to dilute serum and urine and enhance selenium ionization so that both serum and urine can be analyzed with the same calibration curve. Results derived by the ICPMS method were compared with Zeeman Graphite Furnace Atomic Absorption Spectrometry (ZGFAAS) using nickel as the matrix modifier. Detection limits for ZGFAAS and ICPMS using mass 78 are 2.9 and 0.25 μg/l, respectively. ICPMS and ZGFAAS instrument responses were recorded for additions of inorganic selenium, trimethylselenonium iodide, seleno-dl-methionine, and seleno-dl-cystine to urine and serum. ICPMS slopes for all compounds added to urine and serum were found to be nearly identical. ZGFAAS response for each compound was more variable than ICPMS. ZGFAAS response for trimethylselenonium iodide was approximately 3-fold lower than for the other compounds. ZGFAAS regression slopes and correlation coefficients were 0.72 and 0.8139 for reference urine samples. ICPMS regression slope and correlation coefficient vs. the reference target values were 0.95 and 0.9700 for the same urines. Regressions slopes and correlation coefficients for reference sera were 1.01 and 0.9912 for ICPMS and 1.12 and 0.9648 for ZGFAAS. We conclude that ICPMS produced more accurate results than ZGFAAS for selenium in serum and urine.     

Time-based on-line preconcentration cold vapour generation procedure for ultra-trace mercury determination with inductively coupled plasma atomic emission spectrometry

A time-based sequential dispensing on-line column preconcentration procedure for mercury determination at trace levels by cold vapour generation inductively coupled plasma atomic emission spectrometry (CV-ICP-AES), by means of a unified module of a preconcentration column and a gas–liquid separator (PCGLS) is described. The complex of mercury formed on-line with ammonium pyrrolidine dithiocarbamate (APDC) is retained on the surface of the hydrophobic poly(tetrafluoroethylene) (PTFE) turnings, which are packed into the lower compartment of the PCGLS. Subsequently, mercury vapour is generated directly on the PTFE turnings by reductant SnCl₂ and separated from the liquid mixture via the PCGLS by argon purge gas. The outlet of the PCGLS is connected directly to the torch adapter of the plasma without the normal spray chamber and nebulizer. With 60-s preconcentration time and 12.0 mL min^–1 sample flow rate, the sampling frequency is 30 h^–1. The calibration curve is linear over the concentration range 0.02–5.0 g L^–1, the detection limit (c_L) is 0.01 g L^–1 and the relative standard deviation (s_r) is 3.1% at the 1.0 g L^–1 level. The proposed method was evaluated by analysis of BCR CRM 278 (Mytilus Edulis) reference material and applied to the determination of total mercury in digested urine, blood and hair samples.     

Preconcentration of platinum group metals on modified silicagel and their determination by inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry in airborne particulates

Modified silicagel (C18) was studied for separation and preconcentration of platinum group metals (Ru, Rh, Pd, Os, Ir and Pt) as ion associates of their chlorocomplexes with cation of onium salt N(1-carbaethoxypentadecyl)-trimethyl ammonium bromide. Sample containing HCl and the onium salt was pumped through the column. After elution with ethanol the eluate was evaporated in the presence of HCl. Resulting aqueous solutions were analysed with inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). Recovery values of 1-20 mug Pt and Pd from 50 ml of synthetic pure solution were 100+/-3 and 100+/-1%, respectively, however, they diminished with increasing sample volume and in the presence of the real sample matrix or nitrate ions. Samples of engine soot (NIES No. 8), decomposed by low pressure oxygen high-frequency plasma, and airborne particulates from dust filters of meteorological stations, leached with HNO(3) and H(2)O(2), were analysed. A reasonable agreement was found between ICP-MS and ICP-AES results for airborne dust samples and the values comparable with those in literature were determined in NIES No. 8.     

Speciation of arsenic compounds by HPLC with hydride generation atomic absorption spectrometry and inductively coupled plasma mass spectrometry detection

An arsenic specific detection system utilizing on-line microwave digestion and hydride generation atomic absorption spectrometry (MD/HGAAS) is described for arsenic speciation by using high performance liquid chromatography (HPLC). Both ion exchange chromatography and ion pair chromatography have been studied for the separation of arsenite, arsenate, monomethylarsonic acid (MMAA), dimethylarsinic acid (DMAA), and arsenobetaine (AB). When the commonly used mobile phases, phosphate and carbonate buffers at pH 7.5, are used on an anion exchange column, arsenite and AB co-elute. However, selective determination of these two arsenic compounds can be achieved by using the new detection system. Partial separation between arsenite and AB can be achieved by increasing the mobile phase pH to 10.3 and by using a polymer based anion exchange column. The detection limit obtained by using anion exchange chromatography with MD/HGAAS detection is approximately 10 ng/ml (or 200 pg for a 20-mul sample injection) for arsenite, DMAA and AB, 15 ng/ml (or 300 pg) for MMAA, and 20 ng/ml (or 400 pg) for arsenate. Complete separation of the five arsenic compounds is achieved on a reversed phase C18 column by using sodium heptanesulfonate as ion pair reagent. Comparable resolution between chromatographic peaks is obtained by using MD/HGAAS detection and inductively coupled plasma mass spectrometry (ICPMS) detection.     

Applications of inductively coupled plasma mass spectrometry and laser ablation inductively coupled plasma mass spectrometry in materials science

Inductively coupled plasma mass spectrometry (ICP-MS) and laser ablation ICP-MS (LA-ICP-MS) have been applied as the most important inorganic mass spectrometric techniques having multielemental capability for the characterization of solid samples in materials science. ICP-MS is used for the sensitive determination of trace and ultratrace elements in digested solutions of solid samples or of process chemicals (ultrapure water, acids and organic solutions) for the semiconductor industry with detection limits down to sub-picogram per liter levels. Whereas ICP-MS on solid samples (e.g. high-purity ceramics) sometimes requires time-consuming sample preparation for its application in materials science, and the risk of contamination is a serious drawback, a fast, direct determination of trace elements in solid materials without any sample preparation by LA-ICP-MS is possible. The detection limits for the direct analysis of solid samples by LA-ICP-MS have been determined for many elements down to the nanogram per gram range. A deterioration of detection limits was observed for elements where interferences with polyatomic ions occur. The inherent interference problem can often be solved by applying a double-focusing sector field mass spectrometer at higher mass resolution or by collision-induced reactions of polyatomic ions with a collision gas using an ICP-MS fitted with collision cell. The main problem of LA-ICP-MS is quantification if no suitable standard reference materials with a similar matrix composition are available. The calibration problem in LA-ICP-MS can be solved using on-line solution-based calibration, and different procedures, such as external calibration and standard addition, have been discussed with respect to their application in materials science. The application of isotope dilution in solution-based calibration for trace metal determination in small amounts of noble metals has been developed as a new calibration strategy. This review discusses new analytical developments and possible applications of ICP-MS and LA-ICP-MS for the quantitative determination of trace elements and in surface analysis for materials science.     

电感耦合等离子体质谱法测定岩石中47种元素的不确定度评定

采用封闭酸溶电感耦合等离子体质谱(ICP-MS)法测定岩石样品,分别对47种元素的测量结果不确定度进行评定。通过分析测试方法和测量条件,得到测量结果的不确定度主要由样品称量、样品溶液定容和样品溶液中元素浓度测量引入。在实验室质控条件下,对各不确定度分量进行评定和计算,其中随机因素导致的不确定度采用期间精密度试验综合评价,即采用A类方法评定。共完成了16个岩石国家标准物质(GBW 07103~GBW 07123)47种元素测量结果的不确定度合成,并参照GB/T 6379.2-2004,建立了含量w与扩展不确定度U之间的关系模型,运用这一关系模型可得到测量结果的不确定度估计值,只要测量过程本身或所使用的设备未变化,就不需要再重复进行不确定度评估。     

A helium inductively coupled plasma for atomic emission spectrometry

An annular helium inductively coupled plasma (He ICP) was generated at atmospheric pressure. No external cooling was used to stabilize the plasma. Aqueous solution was injected into the plasma without any difficulty. Preliminary results revealed that the annular He ICP was capable of exciting elements such as Cl and Br which possess high excitation energies. Atomic emission detection limits for Cl and Br were improved by factors of 63 and 34, respectively, as compared to the results obtained from the argon inductively coupled plasma. The excitation temperature of the annular He ICP (4180 K) was less than that of an Ar ICP (5570 K).     

蒸气发生-电感耦合等离子体质谱法测定碘

建立了一种在线化学蒸气发生-电感耦合等离子体质谱测定碘的方法。利用碘负离子的还原性,采用氧化还原手段,将碘负离子氧化为碘单质;然后通过碘单质的易挥发特点,将碘蒸气直接导入等离子体。该方法可以提高传输效率,改善样品利用率,使检测灵敏度得到极大的提高。方法的检出限为0.22μg/L,样品加标回收率在87.4%~97.75%之间,RSD(n=11)在3%以内。实验中预先将正5价碘还原成碘负离子,然后加入氧化剂将碘负离子氧化成碘单质进行检测;对碘的形态化学蒸气发生法进行了尝试。     

Determination of total urinary mercury by on-line sample microwave digestion followed by flow injection cold vapour inductively coupled plasma mass spectrometry or atomic absorption spectrometry

The total mercury content in urine was determined by inductively coupled plasma mass spectrometry with the so-called cold vapour method after on-line oxidative treatment of the sample in a microwave oven (FI-MW-CV-ICPMS). Use of a KBr/KBrO(3) mixture, microwave digestion, and the final oxidation with KMnO(4), assure the complete recovery of the organic forms of Hg which would be difficult to determine otherwise if using only the CV-ICPMS apparatus. Quantitative recoveries were obtained for phenyl Hg chloride (PMC), dimethyl Hg (DMM), Hg acetate (MA) and methyl Hg chloride (MMC). Use of automatic flow injection microwave systems (FI-MW) for sample treatment reduces environmental contamination and allows detection limits suitable for the determination of reference values. Since no certified reference materials were commercially available in the concentration ranges of interest, the accuracy of the proposed procedure has been assessed by analysing a series of urine samples with two independent techniques, ICP-MS and AAS. When using the FI-MW-CV-ICP-MS technique, the detection limit was assessed at 0.03microg/L Hg, while with FI-MW-CV-AAS it was 0.2microg/L Hg. The precision of the method was less than 2-3% for FI-MW-CV-ICP-MS and about 3-5% for FI-MV-CV-AAS at concentrations below 1microg/L Hg. These results show that ICP-MS can be considered as a "reference technique" for the determination of total urinary Hg at very low concentrations, such as are present in non-exposed subjects.     

Determination of lead,cadmium and mercury in blood for assessment of environmental exposure: A comparison between inductively coupled plasma–mass spectrometry and atomic absorption spectrometry

A biomonitoring method for the determination of Pb, Cd, and Hg at background levels in whole blood by inductively coupled plasma-mass spectrometry is described. While this method was optimized for assessing Pb, Cd and Hg at environmental levels, it also proved suitable for assessing concentrations associated with occupational exposure. The method requires as little as 200 μl of blood that is diluted 1 + 49 for direct analysis in the inductively coupled plasma-mass spectrometer. Method performance is compared to well-established AAS methods. Initial method validation was accomplished using National Institute of Standards and Technology (NIST) Standard Reference Material 966, Toxic Metals in Bovine Blood. Method detection limits (3s) are 0.05 μg dl^− 1 for Pb, 0.09 μg l^− 1 for Cd; and 0.17 μg l^− 1 for Hg. Repeatability ranged from 1.4% to 2.8% for Pb; 3% to 10% for Cd; and 2.6% to 8.8% for Hg. In contrast, AAS method detection limits were 1 μg dl^− 1, 0.54 μg l^− 1, and 0.6 μg l^− 1, for Pb, Cd, and Hg, respectively. Further performance assessments were conducted over a 2-year period via participation in four international External Quality Assessment Schemes (EQAS) operated specifically for toxic metals in blood. This includes schemes operated by (a) the New York State Department of Health's Wadsworth Center, Albany, NY, USA (b) L′Institut National de Santé Publique du Québec, Centre de Toxicologie du Québec, Canada, (c) Friedrich-Alexander University, Erlangen, Germany, and (d) the University of Surrey, Guildford, UK Trace Elements scheme. The EQAS data reflect analytical performance for blind samples analyzed independently by both inductively coupled plasma-mass spectrometry and AAS methods.     

Analysis of molybdenum oxide by inductively coupled plasma atomic emission and mass spectrometry

Procedures for the analysis of molybdenum oxide by of inductively coupled plasma atomic emission spectroscopy (ICP-AES) and mass spectrometry (ICP-MS) are proposed on the basis of preliminary extraction separation of molybdenum from impurity elements. To separate 39 impurity elements (Li, Be, Na, Mg, Al, K, Ca, Sc, Ti, Cr, Mn, Fe, Co, Ni, Zn, Ga, Rb, Sr, Y, Cd, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Pb, Bi, Th, and U), the extraction of molybdenum from hydrochloric acid solutions using 5-n-pentylthio-8-hydroxyquinoline was used. The capacities of both methods ICP-AES and ICP-MS in the analysis of molybdenum oxide analysis were examined without the removal of the matrix and after the extraction separation of molybdenum.     

Evaluation of the analytical performance of inductively coupled plasma mass spectrometry for the simultaneous determination of major and minor elements in basic slags

The application of inductively coupled plasma mass spectrometry to the analysis of basic slags has been studied. A conventional dissolution-fusion procedure and a microwave digestion system were used for sample dissolution. Suitable selection of the analyte isotopes and the use of appropriate instrument settings and of internal standardization makes it possible to determine the major and minor elements in the same test sample dilution. Use of the omnirange device and low-abundance isotopes for the determination of the major elements is evaluated. The influence of the attack reagents is tested and the interferences caused by polyatomic ions are studied and corrected by applying elementary mathematical equations. For the major and minor elements considered, precision was found to be better than 1% (RSD). Results are presented for three basic slag reference materials and the agreement between the certified and found values shows the capacity of the method accurately to determine elemental concentrations in basic slags.     

Trace characterization of high-purity molybdenum and tungsten by electrothermal atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, inductively coupled plasma mass spectrometry and total reflection X-ray fluorescence spectrometry involving analyte—matrix separation

A technique for the separation of 42 trace elements from up to 5 g of molybdenum and tungsten matrices was developed by means of the radiotracer technique. It is based on adsorption of the analyses on the cation exchanger Dowex 50 W x 9 from a 4% H₂O₂/0.01 mol 1⁻¹ HNO₃ solution followed by their elution with 15 ml of 4 mol I⁻¹ HNO₃ in the opposite flow direction. Both matrices were removed with a separation factor > 10⁴. The separation technique was applied to the analysis of these materials by electrothermal atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, inductively coupled plasma mass spectrometry and total reflection X-ray fluorescence spetrometry. For all the determination methods used, the limits of detection are given and compared with those of other methods. With inductively coupled plasma mass spectrometry, for 22 of the 30 assayed elements, limits of detection at the sub-ng g⁻¹ level were achieved. The results are compared with those obtained by radiochemical neutron activation analysis in this work and by glow discharge mass spectrometry, secondary ion mass spectrometry, isotope dilution mass spectrometry and by solution spectrometric methods in other laboratories.     

Radionuclide determination in environmental samples by inductively coupled plasma mass spectrometry

The determination of naturally occurring and anthropogenic radionuclides in the environment by inductively coupled plasma mass spectrometry has gained recognition over the last fifteen years, relative to radiometric techniques, as the result of improvement in instrumental performance, sample introduction equipment, and sample preparation. With the increase in instrumental sensitivity, it is now possible to measure ultratrace levels (fg range) of many radioisotopes, including those with half-lives between 1 and 1000 years, without requiring very complex sample pre-concentration schemes. However, the identification and quantification of radioisotopes in environmental matrices is still hampered by a variety of analytical issues such as spectral (both atomic and molecular ions) and non-spectral (matrix effect) interferences and instrumental limitations (e.g., abundance sensitivity).The scope of this review is to highlight recent analytical progress and issues associated with the determination of radionuclides by inductively coupled plasma mass spectrometry. The impact of interferences, instrumental limitations (e.g., degree of ionization, abundance sensitivity, detection limits) and low sample-to-plasma transfer efficiency on the measurement of radionuclides by inductively coupled plasma mass spectrometry will be described. Solutions that overcome these issues will be discussed, highlighting their pros and cons and assessing their impact on the measurement of environmental radioactivity. Among the solutions proposed, mass and chemical resolution through the use of sector-field instruments and chemical reactions/collisions in a pressurized cell, respectively, will be described. Other methods, such as unique sample introduction equipment (e.g., laser ablation, electrothermal vaporisation, high efficiency nebulization) and instrumental modifications/optimizations (e.g., instrumental vacuum, radiofrequency power, guard electrode) that improve sensitivity and performance will also be examined.