Separation of flavonoids and phenolic acids from propolis by capillary zone electrophoresis

The simultaneous determination of twelve different flavonoids, pinocembrin, acacetin, chrysin, rutin, catechin, naringenin, galangin, luteolin, kaempferol, apigenin, myricetin, and quercetin, two phenolic acids, cinnamic acid and caffeic acid, and one stilbene derivative, resveratrol, in propolis extracts used in medicine has been investigated by capillary zone electrophoresis (CZE). With a buffer constituted by sodium tetraborate 30 mM, pH 9.0, and 15 kV applied voltage, the 15 polyphenols were separated on an uncoated fused-silica capillary within 40 min using normal polarity. Under the experimental conditions used, a linear relationship was calculated between the CZE migration times and the molecular weight of polyphenols' expression of the increasing amount of their hydroxyl groups and polarity. Regression equations revealed a linear relationship (correlation coefficients > 0.97) between the peak area of each polyphenol species and their concentration, from 6 to 120 ng. The levels of analytes in three different propolis extracts, ethanolic, aqueous-ethanolic and aqueous-glycolic, used to prepare various commercial medicinal products, were determined. The aqueous-ethanolic propolis extract showed a great percentage of caffeic acid, galangin, quercetin, and chrysin, whilst the ethanolic preparation was composed of a great amount of resveratrol, chrysin, and caffeic acid. On the contrary, the aqueous-glycolic propolis preparation was composed of approx. 11% of caffeic acid and a low amount of the other identified flavonoids due to the presence of approx. 85% of nonidentified compounds. CZE represents a valuable method for the qualitative and quantitative assay of the most relevant polyphenol components of propolis, representing an alternative to obtain typical fingerprints of propolis and a reliable identification of a large number of propolis polyphenolic species.     

Separation of nitrophenols by capillary zone electrophoresis

Separation conditions suitable to a rapid resolution of a group of eight nitrophenols by capillary zone electrophoresis (CZE) were found. Required differences in their effective mobilities were achieved via host-guest complexation of -cyclodextrin combined with intermolecular interactions involved by polyvinylpyrrolidone. When both additives were present in the carrier electrolyte at pH=9.1 nitrophenols could be separated in the column of a, 300 m I.D. and 180 mm in the length within 8–9 minutes. It is shown that the column of such an I.D. providing enhanced sample load capacity, can operate with high separation efficiencies as maintaining zone dispersions due to Joule heating on a tolerable level. CZE on-line coupled with isotachophoretic sample pretreatment is shown to provide the concentration limits of detection at low ppb concentrations by using an on-column photometric detector operating at 254 and 405 nm detection wavelengths.     

Separation of nicotine metabolites by capillary zone electrophoresis and capillary zone electrophoresis/mass spectrometry

The use of capillary zone electrophoresis (CZE) and capillary zone electrophoresis/mass spectrometry (CZE/MS) has been demonstrated, in principle, for the separation of nicotine and nicotine metabolites. The buffer system developed for separation and detection by CZE/UV was modified for use in CZE/MS analysis. Several of the metabolites are isobaric and tandem mass spectrometric (MS/MS) techniques have been used to differentiate such analytes.     

Detection and determination of chlorophenols and chlorophenoxyacetic acids by instrumental analysis

A quantitative method for the determination of chlorophenols and chlorophenoxyacetic acids in aqueous solutions is described. The samples investigated contained 2-chlorophenol, 2,4-dichlorophenol, 2,6-dichlorophenol, 2,4,6-trichlorophenol and their phenoxyacetic acid derivatives. The total amount of chlorophenols is determined by spectrophotometry, the ratio of individual chlorophenols by gas chromatography and the total quantity of phenoxyacetic acids by acidimetric titration. The determinations are carried out after extraction with diethyl ether, carbon tetrachloride and petroleum ether, respectively.     

Separation of globins using free zone capillary electrophoresis.

This paper describes the use of high-performance capillary electrophoresis for the separation of globin chains. Adult and newborn haemolysates from normal individuals and children suspected of having thalassaemia were analysed using free zone electrophoresis. Separation of globins was accomplished using a 25 mM phosphate buffer at pH 11.8. Distinct peaks of alpha-, beta- and gamma-chains were resolved within 8 min. The coefficient of variation for within-day and between-day runs was 4.1% and 5.7%, respectively. This method is simple and rapid, and it can be used to screen for thalassaemia and for the clinical study of various haemoglobinopathies.     

Separation and determination of perfluorinated carboxylic acids using capillary zone electrophoresis with indirect photometric detection

Perfluorinated carboxylic acids (PFCAs) belong to anthropogenic fluoroorganic compounds that have been detected in the natural environment and living organisms including humans. A capillary zone electrophoretic method with indirect UV detection using 2,4-dinitrobenzoic acid (2,4-DNBA) as a chromophore probe has been developed for analysis of PFCAs (C6-C12) in water. Optimal analyte resolution and detection sensitivity was obtained with 50 mM Tris solution of pH 9.0 and 50% methanol as a background electrolyte (BGE). The baseline separation of C6-C12 PFCAs was obtained within 20 min with detection limits in the range from 0.6 to 2.4 ppm.     

Separation of human fibrinopeptides by capillary zone electrophoresis

We describe a method for the simultaneous determination of the five fibrinopeptide forms derived from the thrombin-promoted activation of human fibrinogen by capillary zone electrophoresis (CZE). The fibrinopeptide mixture was first desalted by a solid-phase extraction (SPE) step. The analysis was performed in reversed polarity in a highly cross-linked polyethylene glycol (PEG)-coated capillary with UV-light absorption detection at 200 nm. Several parameters including buffer concentration and pH, presence of an organic modifier, temperature, and applied voltage, have been tested. The best separations were obtained within 20 min, utilizing a 20 mM sodium phosphate buffer without organic modifier, in the narrow 6.1-6.2 pH range, at 25 degrees C, with an applied voltage of 20 kV. Quantitative analysis is made possible by the use of sheep fibrinopeptide A as an internal standard to correct for both extraction and injection errors.     

有机改性剂对氯代酚毛细管区带电泳分离的影响

在分离19种氯代酚的过程中,考察了不同的有机添加剂对其毛细管区带电泳分离的影响,发现除了缓冲溶液的pH值外,缓冲溶液添加剂对氯代酚的电泳分离也有较大影响。这种影响与添加剂和氯代酚形成氢键的能力有关。     

Determination of alkylphosphonic acids by capillary zone electrophoresis using indirect UV detection

Capillary zone electrophoresis with indirect UV detection was used for the determination of a series of alkylphosphonic acids. For this purpose, a few UV-absorbing background electrolytes were tested and phenylphosphonic acid, which has a mobility close to that of the analysed compounds, was shown to be the most suitable. The influence of several parameters such as concentration of the UV-absorbing background electrolyte and concentration of borate on both sensitivity and efficiency was investigated. An increase in the borate concentration produced an improvement of the signal-to-noise ratio. Conversely, the sensitivity decreased with increasing concentration of the phenylphosphonic acid. The reproducibility of the method was very satisfactory and limits of detection were less than 0.21 pmol injected.     

毛细管电泳分离几种神经递质的研究

研究了不同毛细管预处理方法对组胺、5-羟色胺及儿茶酚胺类神经递质电泳分离的影响，采用优化的毛细管预处理方法及电泳分离条件基线分离了组胺、5-羟色胺、去甲肾上腺素和肾上腺素。利用多巴胺和5-羟色胺在毛细管内壁吸附效应的不同，对电泳淌度极为相近的多巴胺和5-羟色胺进行了分离和鉴定。以PC22细胞为研究对象，证实了该细胞中所含大量神经递质是多巴胺，不是5-羟色胺。     

Separation of perfluorocarboxylic acids using capillary electrophoresis with UV detection

A capillary electrophoretic method with UV detection for separation and quantitation of perfluorocarboxylic acids (PFCAs) from C6-PFCA to C12-PFCA has been developed. The optimization of measurement conditions included the choice of the most appropriate type and concentration of buffer in the background electrolyte (BGE), as well as the type and the content of an organic modifier. The optimal separation of investigated PFCAs was achieved with 50 mM phosphate buffer and 40% isopropanol in the BGE using direct UV detection. The optimum wavelength for direct UV detection was optimized at 190 nm. For indirect detection, several chromophores were studied. Five mM 3,5-Dinitrobenzoic acid (3,5-DNBA) in 20 mM phosphate buffer BGE and indirect UV detection at 280 nm gave the optimal detection and separation performance for the investigated PFCAs. The possibility of on-line preconcentration of solutes by stacking has been examined for indirect detection. The detection limits (LODs) determined for direct UV detection ranged from 2 microg/mL for C6-PFCA to 33 microg/mL for C12-PFCA. The LODs obtained for indirect UV detection were comparable to those obtained for direct UV detection.     

Determination of free fatty acids by capillary zone electrophoresis

Capillary zone electrophoresis was investigated for the separation of free fatty acids as an alternative to well established techniques such as GC or HPLC. The analysis was performed with indirect UV detection in a counterelectroosmotic flow mode using a diethylbarbiturate carrier electrolyte at a pH between 10 and 11 in a mixed aqueous-organic solvent. Separation of saturated and unsaturated fatty acids could be achieved after bromination of the double bonds. Problems with wall adsorption of fatty acids could be overcome by increasing the temperature and using a high concentration of a zwitterionic reagent to inactivate the silica surface. Increased sensitivity could be achieved after preconcentration on alumina. The method was applied to the determination of free fatty acids in dairy products. The advantages compared to traditional methods include short analysis times and simple preparation steps.Dedicated to Univ. Prof. Dr. Karl Winsauer on the occasion of his 70th birthday     

Separation of twenty underivatized essential amino acids by capillary zone electrophoresis with contactless conductivity detection

Twenty underivatized essential amino acids were separated using capillary zone electrophoresis and consequently detected with contactless conductivity detection (CCD). A simple acidic background electrolyte (BGE) containing 2.3 M acetic acid and 0.1% w/w hydroxyethylcellulose (HEC) allowed the electrophoretic separation and sensitive detection of all 20 essential amino acids in their underivatized cationic form. The addition of HEC to the BGE suppressed both, electroosmotic flow and analyte adsorption on the capillary surface resulting in an excellent migration time reproducibility and a very good analyte peak symmetry. Additionally, the HEC addition significantly reduced the noise and long-term fluctuations of the CCD baseline. The optimized electrophoretic separation method together with the CCD was proved to be a powerful technique for determination of amino acid profiles in various natural samples, like beer, yeast, urine, saliva, and herb extracts.     

Determination of phenolic acids by capillary zone electrophoresis and HPLC

Selected phenolic acids are determined by capillary zone electrophoresis and HPLC, each using UV detection. The optimised CZE background electrolyte contained 50 mM acetic acid, 95 mM 6-aminocaproic acid, 0.1% polyacrylamide, 1% polyvinylpyrrolidone, and 10% methanol. Twelve phenolic acids (gallic, p-hydroxybenzoic, 3,4-dihydroxybenzoic, vanillic, syringic, o-coumaric, p-coumaric, caffeic, sinapic, ferulic, salicylic and chlorogenic) were separated within 10 minutes. Chromatographic separation of these phenolic acids was carried out on an Eclipse XBD C8 column using a mobile phase gradient (acetonitrile / methanol / water / 0.1% phosphoric acid); all were separated within 25 minutes. Electrophoretic and chromatographic determinations of ferulic and chlorogenic acids were compared on barley, malt, and potato samples. The methods’ characteristics were: linearity (1–20 mg ml and 0.2–4 mg ml⁻¹), accuracy (recovery 94 ± 5% and 96 ± 4%), intra-assay repeatability (4.1% and 3.5%), and detection limit (0.2 and 0.02 mg ml⁻¹).      

Separation of enantiomers of butorphanol and cycloamine by capillary zone electrophoresis

Butorphanol tartrate is a synthetic opioid agonist-antagonist used as analgesic, possessing three chiral centres in the basic part of the molecule. Its chiral purity is routinely controlled only by optical rotation. A new capillary zone electrophoresis method, capable to separate the enantiomers of butorphanol and intermediate of its synthesis, cycloamine, was developed. Different electrolyte composition (type and concentration of carrier ion, pH, and organic solvent addition), and type and concentration of several chiral selectors (natural and modified cyclodextrins) were tested. Using the optimized conditions (acidic electrolyte with the addition of highly sulphated gamma-cyclodextrin) as low as 0.05% of undesirable enantiomers can be detected. Selected method characteristics, i.e., linearity (0-50 mg/l), precision (2.5% at 20 mg/l), and accuracy (101 +/- 2% at 20 mg/l) were evaluated. The optimized method was applied for the analysis of real batches of butorphanol and cycloamine. It was found that butorphanol tartrate manufactured by IVAX Pharmaceuticals contains less than 0.05% of undesirable enantiomer.     

Separation of unmodified polystyrene nanosphere standards by capillary zone electrophoresis

Size separation of five unmodified polystyrene nanosphere standards with diameters between 50 and 600 nm has been achieved in phosphate buffer solutions as carrier electrolyte. The electrophoretic mobility increases with particle diameter. Optical spectra was shown to be different for particles of different size. Effects of injection time, applied voltage, pH, and phosphate concentration in carrier electrolyte on particle separation were studied. Under optimal conditions the peak efficiency ranged from 600 to 10,500 theoretical plate numbers depending on nanosphere diameter was achieved.     

Separation of structurally related synthetic peptides by capillary zone electrophoresis

The separation of two different sets of synthetic peptides has been investigated by high-performance capillary zone electrophoresis utilising naked, fused silica capillaries. The effects of electrolyte pH, buffer concentration, capillary length and electric field strength on the separation efficiency and selectivity were systematically varied, with the highest resolution achieved with buffer electrolytes of low pH and relatively high ionic strength. Under optimised separation conditions utilising the "short end injection" separation approach with negative electric field polarity, a series of eight structurally-related synthetic peptides were baseline resolved within 4 min without addition of any modifier of the background electrolyte with separation efficiencies in the vicinity of 600000 theoretical plates/m. Further significant enhancement of separation efficiencies could be achieved by taking advantage of the "long end injection" approach with positive electric field polarity. The outcome of these experimental variations parallels the "sweeping" effect that has been observed in the capillary electrochromatographic and micellar electrokinetic separations of polar molecules and permits rapid resolution of peptides with focusing effects. In addition, small changes in the electrolyte buffer pH and concentration were found to have a significant impact on the selectivity of synthetic peptides of similar intrinsic charge. These observations indicate that multi-modal separation mechanisms operated under these conditions with the unmodified fused silica capillaries. This study, moreover, documents additional examples of peptide-specific multi-zoning behaviour in the high-performance capillary zone electrophoretic separation of synthetic peptides.     

Separation of tetracycline and its related substances by capillary zone electrophoresis

Tetracycline was separated from its main impurities 4-epitetracycline, anhydrotetracycline, 4-epianhydrotetracycline, chlortetracycline, and demethyltetracycline by capillary electrophoresis. Systematic method development was performed in which following parameters were consecutively optimized: type and pH of the buffer, buffer concentration, type and concentration of organic modifier, voltage and temperature. Qualitative and quantitative aspects of the method are compared with liquid chromatography.     

Separation of organic and inorganic arsenic species by capillary zone electrophoresis

Summary Capillary zone electrophoresis has been used to separate arsenite, arsenate, dimethylarsinic acid, and phenyl-,p-aminophenyl-, ando-aminophenylarsinic acids. Identification and quantification of the arsenic species at mg L⁻¹ levels was possible by use of direct UV detection at 200 nm. The relative standard deviation (n=7) ranged from 0.97 to 1.52% for migration times and from 2.08 to 4.31% for peak areas. A method for rapid separation of inorganic arsenic species was also developed; by use of this method arsenite and arsenate could be separated within 2 min. Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999