The reaction between [RuCl<Subscript>2</Subscript>(PPh<Subscript>3</Subscript>)<Subscript>3</Subscript>] and hydroxyquinoline carboxylic acid

The reactions of [RuCl₂(PPh₃)₃] with 8-hydroxy-2-methyl-quinoline-7-carboxylic acid was examined, and a novel ruthenium(II) complex—[Ru(PPh₃)₂(C₅H₈NO)₂]—was obtained. The compound was studied by IR, UV–vis spectroscopy, and X-ray crystallography. The molecular orbital diagram of the complex was calculated with the density functional theory (DFT) method. The spin-allowed singlet–singlet electronic transitions of the compound were calculated using the time-dependent DFT method, and the UV–vis spectrum of the compound was discussed, on this basis. The luminescence property of the [Ru(PPh₃)₂(C₅H₈NO)₂]was examined.     

Photochemical substitution of benzene in the iron cyclohexadienyl complex [(η<Superscript>5</Superscript>-C<Subscript>6</Subscript>H<Subscript>7</Subscript>)Fe(η-C<Subscript>6</Subscript>H<Subscript>6</Subscript>)]<Superscript>+</Superscript>

The visible light irradiation of the [(η⁵-C₆H₇)Fe(η-C₆H₆)]⁺ cation (1) in acetonitrile resulted in the substitution of the benzene ligand to form the labile acetonitrile species [(η⁵-C₆H₇)Fe(MeCN)₃]⁺ (2). The reaction of 1 with Bu^tNC in MeCN produced the stable isonitrile complex [(η⁵-C₆H₇)Fe(Bu^tNC)₃]⁺ (3). The photochemical reaction of cation 1 with pentaphosphaferrocene Cp*Fe(η-cyclo-P₅) afforded the triple-decker cation with the bridging pentaphospholyl ligand, [(η⁵-C₆H₇)Fe(μ-η:η-cyclo-P₅)FeCp*]⁺ (4). The latter complex was also synthesized by the reaction of cation 2 with Cp*Fe(η-cyclo-P₅). The structure of the complex [3]PF₆ was established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2088–2091, November, 2007.     

Oxidation of Diethyl Sulfide in Aqueous Solutions by Peroxynitrite and the H<Subscript>2</Subscript>O<Subscript>2</Subscript>-NO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> System

It was found that nitrite anions are effective activators of hydrogen peroxide in the reaction with diethyl sulfide. The observed kinetics are consistent with the proposed intermediate formation of peroxynitrous acid (ONOOH). The rate constants for the reaction of diethyl sulfide Et₂S with the acid ONOOH (k₀ = 1.8⋅10³ L/mol⋅s) and with the anion ONOO⁻ (k₋ = 6⋅10⁻² L/mol⋅s) are respectively 10⁵ and three times higher than with hydrogen peroxide. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 5, pp. 290–295, September–October, 2005.     

Structure and properties of H<Subscript>8</Subscript>(PW<Subscript>11</Subscript>TiO<Subscript>39</Subscript>)<Subscript>2</Subscript>O heteropoly acid

Heteropoly acid (HPA) H₈(PW₁₁TiO₃₉)₂O·xH₂O (I) is synthesized by three different ways and studied by chemical analysis, potentiometric titration, mass-spectrometry, IR, ³¹P, ¹⁸³W, and ¹⁷O NMR spectroscopy, thermogravimetry, and transmission electron microscopy. Anion I consists of two subparticles of the Keggin structure bridged by Ti-O-Ti. The dimeric anion exists in HPA aqueous solutions at [I] > 0.02 M. At pH > 0.6 it splits to a [PW₁₁TiO₄₀]⁵⁻ monomer stable up to pH ∼ 6. When heated (150–400)°C, I splits into H₃PW₁₂O₄₀ and, apparently, H₃PW₁₀Ti₂O₃₈ without phase separation. Thermolysis products are soluble and when dissolved in water turn again into I. Complete decomposition of I to oxides occurs at ∼450°C.     

Reaction of Sulfur and Oxygen-Bridged 8-Quinolinolato Trinuclear Molybdenum Cluster [Mo<Subscript>3</Subscript>OS<Subscript>3</Subscript>(qn)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> with Acetylene Carboxylic Acids

The reaction of a sulfur and oxygen-bridged 8-quinolinolato trinuclear molybdenum cluster [Mo₃OS₃(qn)₃(H₂O)₃]⁺ (3; Hqn = 8-quinolinol) with equimolar amounts of acetylene carboxylic acid, 4-pentynoic acid, 5-hexynoic acid, acetic acid, and pimelic acid gave clusters having μ-carboxylato groups, [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡CCOO)] (6), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₂COO)] (7), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₃COO)] (8), [Mo₃OS₃(qn)₃(H₂O)(μ-CH₃COO)] (4), and [{Mo₃OS₃(qn)₃(C₂H₅OH)}₂(μ-C₇H₁₀O₄)] (5), respectively. X-ray structural analyses, ¹H NMR, and electronic spectra of these clusters made clear that each of the COO⁻ groups of the reagents bridges two Mo atoms in each cluster and that no adduct formation occurred at the sulfurs in the clusters. The reaction of 3 with a large excess-molar amount (50 times) of acetylene carboxylic acid gave [Mo₃OS(μ₃-SCH=C(COOH)S)(qn)₃(H₂O)(μ-HC≡CCOO)] (9) with two molecules of acetylene carboxylic acid, one acting as a carboxylato bridge and the other in adduct formation, as supported by the electronic and ¹H NMR spectra. The corresponding aqua cluster [Mo₃OS₃(H₂O)₉]⁴⁺ (1), on the contrary, reacts with acetylene carboxylic acid to give adduct [Mo₃OS(μ₃-SCH=C(COOH)S)(H₂O)₉]⁴⁺ (2). Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Influence of B<Subscript>2</Subscript>O<Subscript>3</Subscript> on the structure and crystallization of soil active glasses

Glasses of the SiO₂–P₂O₅–K₂O–MgO–CaO–B₂O₃ system acting as nutrients carriers in the soil environment were synthesised by the melt-quenching technique. Thermal properties were studied using DTA/DSC methods and the influence of B₂O₃ and P₂O₅ content on thermal stability and crystallization process of these glasses was examined. The structure of the glass network was characterized by FTIR, ³¹P, and ¹¹B MAS NMR. The chemical activity of the glasses in the 2 mass% citric acid solution was measured by the ICP-AES method. The analysis indicated that the formation of P–O–B units with chemically stable tetrahedral borate groups decreases the glass solubility in conditions simulating the soil environment.     

Ruthenium Carbonyl Cluster Complexes with Phenylgermyl Ligands from the Reactions of Ph<Subscript>3</Subscript>GeH with Ru(CO)<Subscript>5</Subscript> and Ru<Subscript>3</Subscript>(CO)<Subscript>12</Subscript>

Four new triphenylgermylruthenium carbonyl compounds HRu(CO)₄GePh₃, 14; Ru(CO)₄(GePh₃)₂, 15; Ru₂(CO)₈(GePh₃)₂, 16; and Ru₃(CO)₉(GePh₃)₃(μ-H)₃, 17 were obtained from the reaction of Ru(CO)₅ with Ph₃GeH in hexane solvent at reflux, 68 °C. The major product 14 was formed by loss of CO from the Ru(CO)₅ and an oxidative addition of the GeH bond of the Ph₃GeH to the metal atom. This six coordinate complex contains one terminal hydrido ligand. Compound 15 is formed from 14 and contains two trans-positioned GePh₃ ligands in the six coordinate complex. Compound 16 contains two Ru(CO)₄(GePh₃) fragments joined by an Ru–Ru single bond. Compound 17 contains a triangular cluster of three ruthenium atoms with three bridging hydrido ligands and one terminal GePh₃ ligand on each metal atom. When heated to 125 °C, 14 was converted to the new triruthenium compound Ru₃(CO)₁₀(μ-GePh₂)₂, 18. Compound 18 consists of a triangular tri-ruthenium cluster with two GePh₂ ligands bridging two different edges of the cluster and one bridging CO ligand. Ru₃(CO)₁₂ was found to react with Ph₃GeH at 97 °C to yield three products: 15, and two new compounds Ru₃(CO)₉(μ-GePh₂)₃, 19 and Ru₂(CO)₆(μ-GePh₂)₂(GePh₃)₂, 20 were obtained. Compound 19 is similar to 18 having a triangular tri-ruthenium cluster but has three bridging GePh₂ ligands, one on each Ru–Ru bond. Compound 20 contains only two ruthenium atoms joined by a single Ru–Ru bond that has two bridging GePh₂ ligands and a terminal GePh₃ ligand on each metal atom. All compounds were characterized by a combination of IR, ¹H NMR, single-crystal X-ray diffraction analyses. This report is dedicated to Professor Dieter Fenske on the occasion of his 65th birthday for his many pioneering contributions to the chemistry of metal chalcogenide cluster complexes.     

Thermal decomposition paths in A<Subscript>2</Subscript>CuCl<Subscript>4</Subscript> complexes: anilinium and its derivatives

The thermal decomposition paths of anilinium, 4-chloro anilinium tetrachlorocopper(II) complexes are compared to their benzilinium derivative. All these complexes crystallize in the layered structure, typical for a A₂MX₄ family, are studied in literature for their magnetic, semiconducting properties. TG analyses of (anilinium)₂CuCl₄ (A) and (4-chloro anilinium)₂CuCl₄ (B) loses one molecule of organic ammonium hydrochloride along with one molecule of amine, to form (H)CuCl₃, which subsequently completely decomposes to Cu above 500 °C. On the other hand, (benzilinium)₂CuCl₄ (C) loses two molecules of hydrochloride along with chlorine molecule first then two molecules of benzyl amine with formation of Cu above 300 °C. DSC studies on C have shown reversible endothermic phase transition at 130.95 °C (−1.98 J g⁻¹) while heating and exothermic phase transition at 117.07 °C (0.93 J g⁻¹) while cooling. Thus, the observed changes in the decomposition pathway can be correlated to the order–disorder phase transition occurred in the compound C.     

Synthesis and crystal structure of new double mercury silver phosphide iodide Hg<Subscript>12</Subscript>Ag<Subscript>41</Subscript>P<Subscript>88</Subscript>I<Subscript>41</Subscript>

New double mercury silver phosphide iodide Hg₁₂Ag₄₁P₈₈I₄₁ (1) was synthesized and its crystal structure was established. Compound 1 crystallizes in the cubic system. The characteristic feature of the crystal structure 1 is the presence of the anionic cage clusters P₁₁ ³⁻, which have been previously found in alkali metal compounds only. The well-ordered P₁₁ ³⁻ clusters form a system of polyhedra, which encapsulate various disordered α-AgI-type fragments. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1882–1886, October, 2007.     

Synthesis and structure of the polymeric complex [Ag<Subscript>2</Subscript>(Ph<Subscript>3</Subscript>P)<Subscript>2</Subscript>B<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

A method for the synthesis of the silver(I) complex with the closo-decaborate anion and triphenylphosphine [Ag₂(Ph₃P)₂B₁₀H₁₀] _n was developed and the structure of this complex was studied. The polymeric chain of the complex is formed with participation of Ag(I) atoms, which coordinate the B₁₀H₁₀²⁻ anions through the apical (B(1)–B(2), B(9)–B(10)) and equatorial (B(3)–B(6), B(5)–B(8)) edges, the metalligand bonding occurring through three-center two-electron bonds (MHB). The P atoms of two triphenylphosphine molecules are also incorporated in the inner coordination sphere of the metal: the CN of the silver atom is 4 + 1.     

Synthesis,crystal structure,and electrical properties of the new ternary molybdate Rb<Subscript>5</Subscript>NdHf(MoO<Subscript>4</Subscript>)<Subscript>6</Subscript>

The subsolidus phase relations in the ternary salt system Rb₂MoO₄-Nd₂(MoO₄)₃-Hf(MoO₄)₂ were studied by X-ray powder diffraction. The ternary molybdates Rb₅NdHf(MoO₄)₆ (1) and Rb₂NdHf₂(MoO₄)_6.5 are formed in this system. Compound 1 without impurities was synthesized by the solid-phase method by varying the temperature in the range of 400–600 °C and the annealing time from 70 to 110 h. Single crystals of compound 1 were grown by the flux method. The structure of compound 1 was established and the electrical properties of ceramic samples of this compound were investigated. This ternary molybdate has mixed electronic-ionic conductivity with the ionic component predominating at 200–500 °C. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2063–2066, November, 2007.     

Electrochemical deposition of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> for thermoelectric microdevices

The electrolyses of solutions of bismuth oxide and tellurium oxide in nitric acid with molar ratios of Bi:Te=3:3–4:3 lead to cathodic deposits of films of bismuth telluride (Bi₂Te₃), an n-type semiconductor. Current densities of 2–5 mA/cm² were applied. Voltammetric investigations showed that Bi₂Te₃ deposition occurred at potentials more negative than −0.125 V (Ag/AgCl, 3 M KCl). The deposit was identified as bismuth telluride (γ-phase) by X-ray analysis. Hall-effect measurements verified the n-type semiconducting behaviour. The films can be deposited in microstructures for thermoelectric microdevices like thermoelectric batteries or thermoelectric sensors.     

Regularities in the stabilization by hemoglobin of binuclear iron complexes [Fe<Subscript>2</Subscript>(μ-N—C—SR)<Subscript>2</Subscript>(NO)<Subscript>4</Subscript>] containing benzimidazolylthiol and benzothiazolylthiol ligands

The NO-donor ability of new binuclear tetranitrosyl complexes of the μ-N—C—S type, namely, bis(5-methylbenzimidazol-2-ylthio)- (1), bis(benzimidazol-2-ylthio)- (2), and bis(benzothiazol-2-ylthio)(tetranitrosyl)diiron (3), was studied in aqueous solutions by spectrophotometry. All kinetic regularities obtained for complexes 1–3 are well described in terms of formalism of pseudo-first-order reactions. The apparent first-order reaction rate constants for NO evolution by the complexes to solution were determined. Complexes 1–3 are good donors of NO. The structures of the complexes and the effect of their stabilization by hemoglobin were compared. The stabilization effect is explained by different basicities of the sulfur-containing ligands in the complexes studied.     

Radical–molecule reaction CH<Subscript>2</Subscript>Cl + NO<Subscript>2</Subscript>: a mechanistic study

The radical–molecule reaction mechanism of CH₂Cl with NO₂ has been explored theoretically at the B3LYP/6–311G(d,p) and MC–QCISD (single-point) levels of theory. Our results indicate that the title reaction proceeds mostly through singlet pathways, less go through triplet pathways. The initial association between CH₂Cl and NO₂ is found to be the carbon-to-nitrogen attack forming the adduct a H₂ClCNO₂ with no barrier, followed by isomerization to b ₁ H₂ClCONO-trans which can easily convert to b ₂ H₂ClCONO-cis. Subsequently, the most feasible pathway is the C–Cl and O–N bonds cleavage along with the N–Cl bond formation of b (b ₁ , b ₂ ) leading to product P ₁ CH₂O + ClNO, which can further dissociate to give P ₅ CH₂O + Cl + NO. The second competitive pathway is the 1,3-H-shift associated with O–N bond rupture of b ₁ to form P ₂ CHClO + HNO. Because the intermediates and transition states involved in the above two favorable channels all lie below the reactants, the CH₂Cl+NO₂ reaction is expected to be rapid, as is confirmed by experiment. The present results can lead us to understand deeply the mechanism of the title reaction and may be helpful for further experimental investigation of the reaction.     

Steric distortion of planar NiP<Subscript>2</Subscript>N<Subscript>2</Subscript> chromophores: a spectral,cyclic voltammetric and single crystal X-ray structural study

The complexes trans-[Ni(4-MP)₂(NCS)₂]·MeCN (1) and trans-[Ni(3-MP)₂(NCS)₂] (2) (4-MP = tri(4-methylphenyl)phosphine, 3-MP = tri(3-methylphenyl)phosphine) were prepared and characterized by IR, UV–visible, NMR spectra, CV, TGA and single crystal X-ray crystallography. Both the complexes have planar geometry and are diamagnetic. The Ni–P distances in both complexes are relatively short as a result of strong back donation from nickel to phosphorus. The phenyl rings in the 3-MP analogue (2) show increased pitching with reference to the plane formed by the ipso carbons due to increased steric effects. For complex (2), the N–Ni–N and P–Ni–P angles are significantly lower than the almost linear N–Ni–N and N–Ni–P angles observed for both complex (1) and trans-[Ni(PPh₃)₂(NCS)₂]. This observation indicates that the 3-methylphosphine ligand forces complex (2) to distort towards a tetrahedral geometry. IR spectra of both complexes show strong bands around 2,090 cm⁻¹ due to N-coordinated thiocyanate, while the electronic spectra contain d–d transitions around 452 nm. Cyclic voltammograms show that the irreversible one-electron reduction potentials increase in the following order: trans- [Ni(PPh₃)₂(NCS)₂] < trans- [Ni(3-MP)₂(NCS)₂] < trans-[Ni(4-MP)₂(NCS)₂], revealing the electron releasing effect of the methyl groups. The planar complexes exhibit interallogony in coordinating solvents.     

Mechanisms for the formation of layered A<Subscript>4</Subscript>B<Subscript>3</Subscript>O<Subscript>12</Subscript> compounds from coprecipitated hydroxocarbonate and hydroxide systems

We have established and analyzed the sequences of phase transitions in synthesis of layered compounds in the A_nB_n–1O_3n family ( \textA₃^\textII\textLnB₃^\textV\textO₁₂ {\text{A}}_3^{\text{II}}{\text{LnB}}_3^{\text{V}}{{\text{O}}_{{12}}} (A^II = Ba, Sr, Ln = La, Nd, B^V = Nb, Ta) and La₄Ti₃O₁₂ with n = 4) from coprecipitated hydroxocarbonate and hydroxide systems, including steps involving the formation, solid-phase reaction, or structural rearrangement of intermediates.     

Phase formation in the FeVO<Subscript>4</Subscript>–Co<Subscript>3</Subscript>V<Subscript>2</Subscript>O<Subscript>8</Subscript> system

Phase relations in the solid state in the FeVO₄–Co₃V₂O₈ system, in the whole range of components concentration have been studied. It was found that the composition of the phase of the howardevansite type structure, formed in the investigated system, corresponds with the Co_2.616Fe_4.256V₆O₂₄ formula. The phase of the lyonsite type structure has a homogeneity range with the Co_3+1.5xFe_4–xV₆O₂₄ formula (0.476 formula (0.476<x<1.667). The melting temperature and the volume of the unit cell of the lyonsite type structure phase increases together with the rise of cobalt quantity contained in it. Basing on the results of the DTA and XRD measurements a phase diagram of the FeVO_4–Co₃V₂O₈ system up to the solidus line was constructed.     

Synthesis of ammonia from natural gas at atmospheric pressure with doped ceria–Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>–K<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite electrolyte and its proton conductivity at intermediate temperature

A new type of oxide–salt composite electrolyte, yttrium doped ceria YDC–Ca₃(PO₄)₂–K₃PO₄, was developed and demonstrated for its promising use for ammonia synthesis. Using this composite electrolyte, ammonia was synthesized from nitrogen and natural gas at atmospheric pressure in the solid-state proton conducting cell reactor, and the optimal condition for ammonia production was determined . The evolved rate of ammonia is up to 6.95×10⁻⁹ mol s⁻¹ cm⁻².     

Ionic conductivity of bismuth oxofluoride BiO<Subscript>0.1</Subscript>F<Subscript>2.8</Subscript> with tysonite-type structure (LaF<Subscript>3</Subscript>)

The complex impedance method in the temperature range of 291–660 K was used to study conductivity of oxofluoride BiO_0.1F_2.8 belonging to the tysonite structural type (LaF₃). Bismuth oxofluoride was synthesized using a solid-phase method at 770–870 K for 1–2 h in an argon atmosphere. Heterovalent substitution of fluoride ions F⁻ by oxygen ions O²⁻ in the anionic BiF₃ matrix sublattice results in high ionic conductivity (∼0.1 S/cm at 660 K) of BiO_0.1F_2.8 ceramic samples.     

Phase formation in the V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript> system

Solid-phase interactions in the V₂O₅-Ta₂O₅-MoO₃ system were studied. The formation of com- pounds TaVO₅ and VTa₉O₂₅ in the V₂O₅-Ta₂O₅ binary system was verified. Tetragonal VTa₉O₂₅-base solid solutions of the general formula Ta_{5 + 4x} V_{5 − 4x} O₂₅ (x = 0.25–1) and TaVO₅-base solid solutions of the general formula Ta _x Mo_{1 − x} V_{2 − x} O_{8 − 3x} (x = 0.625–1) were found to form. Subsolidus phase equilibria in the V₂O₅-Ta₂O₅-MoO₃ were determined.