Studies on the feasibility of production of57Co by alpha bombardment of Mn and Ni targets

We have studied the feasibility of producing⁵⁷Co (271.3 d) via the⁵⁵Mn(, 2n)⁵⁷Co reaction (⁵⁵Mn–100%). The thick target yield of⁵⁷Co in the 28 to 18 MeV energy region was measured as 3.87 Ci/Ah. However, the proximity and overlap of the excitation functions for (, n), (, 2n) and (, 3n) reactions on⁵⁵Mn are such that the production of pure⁵⁷Co in high yields free of⁵⁸Co (70.8 d) and⁵⁶Co (78.8 d) has not been feasible. We have also studied a new method for ancillary production of⁵⁷Co via the reactions⁵⁸Ni(, p)⁵⁷Co and during the course of producing⁶²Zn by⁶⁰Ni(, 2n)⁶²Zn reaction. In this case the yield of⁵⁷Co of reasonable purity has been up to 1 Ci/Ah.     

Thermal decomposition of Cu(I) phosphine complexes

The thermal decomposition of Cu(I) phosphine complexes of the general types (CuXPPh₃)₄, [CuX(PPh₃)₂] and [CuX(PPh₃)₃] was investigated.The thermal decomposition of (CuXPPh₃)₄, where X denotes Cl^–, Br^–, I^–, NO ₃ ^– and PPh₃=P(C₆H₅)₃, occurs with formation of a phosphine oxide intermediate. For the remaining complexes this intermediate was not proved in the thermal decomposition.

---

Zusammenfassung Die thermische Zersetzung der Cu(I)-Phosphinkomplexe vom allgemeinen Typ (CuXPPh₃)₄ und [CuX(PPh₃)₂], wie auch [CuX(PPh₃)₃] wurde untersucht. Die thermische Zersetzung von (CuXPPh₃)₄, wobei X=Cl^–, Br^–, I^– und NO ₃ ^– bedeutet und PPh₃=P(C₆H₅)₃, verläuft unter Bildung eines Phosphinoxid Zwischenproduktes, bei den übrigen Komplexen konnte dieses im Laufe der thermischen Zersetzung nicht nachgewiesen werden.

---

Résumé On a étudié la décomposition thermique des complexes phosphine-Cu(I) de formule générale (CuXPPh₃)₄, [CuX(PPh₃)₂], [CuX(PPh₃)₃]. La décomposition thermique de (CuXPPh₃)₄, où X désigne Cl^–, Br^–, I^– et NO ₃ ^– , et PPh₃=P(C₆H₅)₃, s'effectue avec formation d'un oxyde de phosphine intermédiaire; avec les autres complexes, cet intermédiaire n'a pas été mis en évidence au cours de la décomposition thermique.

---

(CuXPPb₃)₄ [CuX(PPh₃)₂] [CuX(PPh₃)₃]. (CuXPPh₃)₄, X=Cl^–, Br^–, I^–, NO ₃ ^– , PPh₃=(₆₅)₃ . .

     

Trace characterization of high-purity nickel by instrumental and radiochemical neutron activation analysis

Summary The high activity of the radionuclides ⁶⁵Ni (t_1/2=2.52 h) and ⁵⁸Co (t_1/2=70.8 d) imposes severe limitations on the performance of direct instrumental neutron activation analysis of nickel. The extent of the interference of the ⁵⁸Co depends on the ratio of the fluxes of the fast and thermal neutrons. A method of selective removal of cobalt, based on extraction with -nitroso--naphthol has been developed for the purpose of radiochemical NAA. Separation yields have been determined for 36 elements. The detection limits obtainable with both the instrumental and the radiochemical method are <10^–4 g/g for the elements Au, Eu, Ir, La, Sc and Sm, between 10^–4 and 10^–3 g/g for Cr, Cs, Hf, Hg, Lu, Re, Sb, Ta, Th, Tm and Yb, between 10^–3 and 10^–2 g/g for As, Ag, Br, Ce, Ga, Na, Ru, Se, W and Zn, and in the range 0.01–1 g/g for Ba, Cd, Co, Fe, In, K, Mo, Nd, Pd, Rb, Sn, U and Zr.     

Solid-Phase Extraction with Slurry Injection of the Resin Into ETAAS for Trace Determination of Thallium in Natural Water

Thallium in natural water samples was determined by electrothermal atomic absorption spectrometry after 1000-fold enrichment by mini solid-phase extraction from a 100-mL sample solution. A Tl-pyrrolidine-1-carbodithioate complex formed in a sample solution of pH 1.6 was extracted on fine particles of a cellulose nitrate resin dispersed in the sample solution. The cellulose nitrate resin was then collected on a membrane filter (25mm^ø) by filtration under suction using a glass funnel with an effective filtration area of 0.64cm². As a result, a circular thin layer of the resin phase with a diameter of 9mm was obtained. Then the resin phase was carved out by an acrylate resin puncher with a 10-mm^ø hole to put it into a sample cup containing 100µL of 10mM HNO₃ containing 0.5mM NaCl. The resin phase was suspended in the solution by ultrasonication. 1000-fold enrichment was thus attained within 15min, and the suspension was delivered to electrothermal atomic absorption spectrometry. The linear calibration graph was obtained in the range of 0–4ng of Tl in 100mL of a sample solution. The detection limit obtained by 3 method was 0.19ng. The proposed method was applied to the determination of Tl in natural water samples. The results showed the concentration of Tl in seawater was 12.1±1.8pgmL^–1 for the calibration graph method and 12.6±1.4pgmL^–1 for the standard addition method. A snowmelt sample contained 20.7±1.0pgmL^–1 of Tl.     

1A1⇔5T2 Spin Transition in Heterometallic Solid Phases FexNi1-x(Htrz)3(NO3)2 · H2O (Htrz = 1,2,4‐Triazole)

Solid phases Fe_xNi_1-x(Htrz)₃(NO₃)₂ · H₂O (0.4 x 0.8$) and Ni(Htrz)₃(NO₃)₂ · H₂O were synthesized and studied. The phases were studied by means of magnetochemistry, powder Xray difraction analysis, and electronic and IR spectroscopy. The heterometallic phases are described by the stoichiographic method of differentiating dissolution (DD). The values of x were determined by two methods — atomic absorption and DD. Magnetochemical data showed that the solid phases exhibit a hightemperature ¹A₁ ⁵T₂ 0.5 x 0.8 and disappears at x = 0.4. The spin transition is accompanied by thermochromism (color changed from pink to white at 0.6 x 1 and from pink to light lilac at x = 0.5). A decrease in x leads to a decrease in the temperature of the forward (under heating T_c ) and reverse (under cooling T_c ) transitions, a decrease in hysteresis value ( T_c), and a smearing of the spin transition.     

Influence of substituents on rate constants for recombination of tertiary peroxy radicals

A linear correlation between the logarithm of rate constant (2k_t) for recombination of tertiary peroxy radicals (ROO)^* and ^* constants of substituents R was found to be 1g 2k_t=lg 2k _t ^° . The calculated values are 1g 2k _t ^° =4.59±0.08 and ^*=5.56±0.35.

---

I (2k_t) (ROO) R: 1g 2k_t=lg 2k _t ^° . , 1g 1g 2k _t ^° =4,59±0,08 =5,56±0,35

     

Ceramic glaze analysis by simultaneous in-beam PGAA and XRFS

Twenty-one ready-to-use hobby glazes, of which 18 were labeled safe for food containers (SFFC), were analyzed for Al, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, Gd, Hf, K, Mn, Na, Pb, Si, Sm, Sr, Ti, Zn, and Zr by neutron capture prompt -ray activation analysis (PGAA). Simultaneously, Pb was also determined by X-ray fluorescence spectrometry (XRFS) using Pb K X-rays induced by the -ray component of the neutron beam. The XRFS limits of detection were 200–400 g Pb·g^–1 (dry weight), a factor of 100 better than those for PGAA. Pb concentrations (by dry weight; with weight losses ranging from 28 to 49% after air-drying) found were 0.16–27.2% in the SFFC glazes and 0.86–32% in the other glazes. The SFFC glazes contained from <0.6 to 202 g Cd·g^–1, and Co, Cr, and Cu (elements which may enhance Pb leaching from fired glazes) were found in concentrations up to 1.2, 2.7, and 5.6%, respectively. Method accuracy was demonstrated with the analysis of soil, fly ash, and glass standard reference materials.     

Antioxidative and antitumour properties of metal(II) solid complexes with 8-acetyl-4-methyl umbelliferone

Six transition metal(II) complexes with 8-acetyl-4-methyl umbelliferone (AMUH), ML2 (L=AMU^–; M=Mn, Co, Ni, Cu, Zn and Cd), have been synthesized and characterized by elemental analysis, electrical conductance, i.r., 1H-n.m.r. and u.v. spectroscopic techniques. The e.s.r. spectra show that CuL2 is anisotropic, with g2.05 and g2.26. The MnL2 species is characterized by a very broad g2 centered resonance without manganese hyperfine structure. The antioxidative and other biological activities of selected complexes were also investigated, indicating that both the ligand and complexes exhibit a scavenging effect on the superoxide radical (O₂ ^–·) and a suppressing effect on the hydroxyl radical (·OH). The suppressing effect on ·OH is greater than the scavenging effect on O₂ ^–·. The Cu and Mn complexes exhibit very significant suppression ratios for both radicals. However, the inhibitory effect on lipid peroxides results show that, in the initial stage, the Cu and Mn complexes exhibit obvious inhibitory effects on lipid peroxides, but after one hour, they begin to accelerate the lipid peroxides. Lower catalytic activity and instability when the complexes react with active oxygen may be responsible for this dual nature. The ligand and four transition metal(II) complexes selectively, obviously, inhibit the growth of HCT-8 and HL-60 tumour cell lines. They also exhibit a minor influence on the proliferation of B cells in higher concentration (10^–5m), but only a weak effect on the proliferation of T cells of the BALB/C (nude rate) spleen cells.     

Thallium determination in reference materials by Isotope Dilution Mass Spectrometry (IDMS) using thermal ionization

Summary Using Isotope Dilution Mass Spectrometry (IDMS) with thermal ionization, thallium concentrations were determined in reference materials from NIST and BCR, from other sources, and reference materials from the German Environmental Specimen Bank. ²⁰³Tl spike solution is applied for the isotope dilution technique. Thallium concentrations in the investigated materials range from 2.67 g Tl·kg^–1 to 963 g Tl·kg^–1 with a relative standard deviation from 0.14 to 10%. The detection limit was 0.1 ng thallium for this work.     

Determination of pentachlorophenol residues in wine and corks by solvent extraction methodology and specific gas chromatography detection

Summary A gas chromatographic methodology with selective detection is presented for the analysis in wines and corks of pentachlorophenol residues, which are suspected to be the most likely precursors of some off-flavours described in several wine samples. After derivatisation, pentachlorophenol acetate residues were monitored by electrolytic conductivity detection and/or mass spectrometric detection in the selective ion mode at m/z 264 and 266. Recoveries varied from 80 to 96% for wine samples fortified with 5 to 100 g l^–1 and from 83 to 91% for corks (fortified at 25 to 100 g kg^–1). The proposed methodology allowed for a determination limit of g l^–1 for wine and 10 g kg^–1 for corks.     

Determination of ochratoxin A in Portuguese rice samples by high performance liquid chromatography with fluorescence detection

A sensitive and accurate analytical method for the determination of ochratoxin A (OTA) in rice, based on extraction with phosphate-buffered saline/methanol, an immunoaffinity column (IAC) for clean-up, and high performance liquid chromatography with fluorescence detection (HPLC-FD), is described. The limit of quantification of the proposed method was 0.05 g kg^–1. Recovery of OTA from rice samples spiked at 0.05 g kg^–1 was 92%, with a within-day RSD of 5.4%. The proposed method was applied to 42 rice samples from Portugal and the presence of OTA was found in six samples at concentrations ranging from 0.09 to 3.52 g kg^–1. The identification of OTA was confirmed by methyl ester derivatization and then HPLC analysis. The daily intake of OTA by the Portuguese population was also estimated.     

Solid-state decomposition studies on fluoroperoxo species of transition metals part II

The kinetics of isothermal decomposition of solid K₂Zr₂(O₂)₂F₆·2H₂O have been studied in the temperature range 100–226° under vacuum. The fractional decomposition has been determined by measuring the pressure of evolved oxygen during pyrolysis with the help of a McLeod gauge. The values ranged from 0.05 to 0.62. The vs. t data showed that the kinetics are deceleratory throughout the course of the reaction. The initial part of the decomposition reaction could be best described by a unimolecular decay law, while the later stages obey contracting volume kinetics. The activation energies have been determined and the respective values for the above stages are 13.6 and 6.9 kcal·mole^–1.

---

Zusammenfassung Die Kinetik der isothermen Zersetzung von festen K₂Zr₂(O₂)₂F₆·2H₂O wurde im Temperaturbereich von 100–226° im Vakuum untersucht. Die fraktionierte Zersetzung wurde durch Messung des Druckes des während der Pyrolyse entwickelten Sauerstoffs mit einem McLeod-Manometer bestimmt. Die -Werte variierten von 0.05 bis 0.62. Die -t Daten zeigen, daß die Kinetik im Verlauf der Reaktion herabgesetzt wird. Der erste Teil der Zersetzungsreaktion konnte am besten durch ein unimolekulares Zerfallgesetzt beschrieben werden, während die späteren Phasen der Kinetik der Volumenkontraktion gehorchten. Die Aktivierungsenergien wurden berechnet und die entsprechenden Werte für obige Reaktionen ergaben sich 13.6 bzw. 6.9 Kcal mol^–1.

---

K₂Zr₂(O₂)₂F₆·2₂ 100–226°. «» , , . «» 0.05 0.62. –t , . , — . , , , 13.6 6.9 .^–1.

---

---

One of the authors (SMK) is grateful to I.I.T. Delhi for a research scholarship.     

Method comparison study on soot-selective techniques

In a long-term field study at two locations with different air pollution levels several soot-selective measurement techniques were compared with a thermochemical method which measures non-extractable carbon (NEC) detecting the evolved CO₂ by means of coulometric titration. The attenuation measurement technique (aethalometer) and the aerosol photoemission method showed good correlations to NEC for concentrations ranging from 1.6g/m³ to 40.8g/m³. The specific mass absorption coefficient of black carbon with respect to NEC varied between 8.4m²/g and 13.7m²/g with respect to the measurement sites, but the value was found to remain constant at each site independent of seasonal or meteorological variations. The ratio of photoelectric signal to NEC varied between 16 fA·(g/m³)^–1 and 33 fA·(g/m³)^–1 depending on the age of the aerosol. The diurnal variations of that ratio showed strong similarities to the traffic patterns. Additionally a slight temperature dependence of this ratio was found for the aged aerosol with a proportionality factor of – 0.35 fA·(K·g/m³)^–1. With the reflectance measurement technique (smoke shade method) reliable NEC determination was not possible for NEC concentrations 5 g/m³.     

Research on 1-aza two-ring systems

Reduction of 5-[2-(methoxycarbonyl)ethyl]-1,3-dihydropyrrolizines with lithium aluminum hydride gave 5-(-hydroxypropyl)-1,2-dihydropyrrolizines (in 70–90% yields), which have intramolecular -hydrogen bonds in dilute solutions. The parameters of the -hydrogen bonds were determined in the IR spectra, and their enthalpies were found. The data obtained (_OH 95–99 cm^–1, –H 3.05 kJ·mole^–1) show that among compounds with an aliphatic hydroxyl group and a system of electrons, 5-(-hydroxypropyl)-1,2-dihydropyrrolizines have some of the strongest intramolecular -hydrogen bonds.See [1] for communication XVI.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 359–363, March, 1978.     

Photometrische Bestimmung von Bor in hochreinen Chemikalien

Zusammenfassung Bor reagiert in Form des Tetrafluoroboratkomplexes mit dem basischen Farbstoff Methylenblau unter Bildung eines mit 1,2-Dichlorethan extrahierbaren Ionenassoziatkomplexes. Die optimalen Bedingungen für die photometrische Bestimmung von Mikromengen Bor werden ermittelt und das vorgestellte Verfahren hinsichtlich Empfindlichkeit, Genauigkeit und kleinster bestimmbarer Menge charakterisiert.Die Borbestimmung ist im Bereich von 0,25–2,5 g Bor mit einer relativen Standardabweichung von 3,8% für 1,0 g Bor möglich. Der molare Extinktionskoeffizient beträgt ₆₆₅=8,2·10⁴1·mol^–1·cm^–1, die Nachweisgrenze nach Kaiser 0,125 g Bor.Das Verfahren wurde zur Bestimmung von 10^–6 bis 10^–5% Bor in folgenden hochreinen Chemikalien eingesetzt: Methanol, Ethanol, Isopropanol, Aceton, Mineralsäuren, Essigsäure, Ammoniak und Wasserstoffperoxid.

---

Photometric determination of boron in high-purity chemicals

Summary Boron reacts with fluoride to form borofluoride which itself reacts with the basic dye methylene blue forming a complex which can be extracted into 1,2-dichloroethane. Optimum conditions were established for the determination of microamounts of boron by an extraction-photometric method. The procedure presented has been characterized with regard to sensitivity, precision and detection limit.Boron can be determined within a range from 0.25 to 2.5 g with a relative standard deviation s _rel=3.8% for 1 g B. The absorptivity is ₆₆₅=8.2·10⁴1·mol^–1·cm^–1, the detection limit according to Kaiser was found to be 0.125 g B.The procedure was used to analyse high-purity chemicals (10^–6–10^–5% B) such as organic solvents, mineral acids, acetic acid, ammonia, hydrogen peroxide etc.

     

Voltammetric Determination of Trace Amounts of Fenitrothion on a Novel Nano-TiO2 Polymer Film Electrode

A novel nano-TiO₂ polymer modified glassy carbon (GC) electrode was developed for the determination of an organophosphorous pesticide, fenitrothion (-NO₂), in citrate buffer solution. The electrochemical behavior of fenitrothion was characterized by using cyclic voltammetry. An irreversible form, -NO₂, was transformed into a reversible redox couple (-NHOH/-NO), and it can be used to determine trace fenitrothion by square wave voltammetry. The experimental parameters, such as film thickness, pH value, accumulation potential and time were optimized. Interestingly, a cyclic voltammetric scan was observed to be more effective than a constant potential for the accumulation of fenitrothion. A linear response over a fenitrothion concentration of 2.5×10^–8 to 1.0×10^–5M was exhibited, with a detection limit of 1.0×10^–8M (S/N=3). The high sensitivity and selectivity of this film electrode was demonstrated by its practical application to the determination of trace amounts of fenitrothion in lake water and apple samples.     

Critical evaluation and experimental determination of the nuclear activation and decay parameters for the reactions:6 4Zn(n, γ)6 5Zn,1 1 2Sn(n, γ)1 1 3 (m)Sn (E. C.)1 1 3mIn,1 7 4Yb(n, γ)1 7 5(m)Yb

A best choice from literature was made of the isotopic abundance values for⁶⁴zn,¹¹²Sn and¹⁷⁴Yb, and of the absolute gamma-intensities for⁶⁵Zn,^113mIn and¹⁷⁵Yb. From these data and from activation method experiments, the following 2200 m·s^–1 cross sections were determined:⁶⁵Zn(n, )⁶⁵Zn; ₀=(0.726±0.0007) barn [cf. literature 0.76–0.78 barn];¹¹²Sn(n,)¹¹³(m)Sn; ₀(0.91 m⁺g)=(0.539±0.011) barn [cf. literature 1 barn];¹⁷⁴Yb(n,)¹⁷⁵(m)Yb; ₀(m⁺g)=(130+4) barn [cf. literature 65 barn].     

Reactions of pennogenin and related compounds. IV. Formation of (25R,22′R,25′R)-3β,3′β-diacetoxy-26,22′-epoxy-16,16′-bifurosta-5,20(22),5′,17′(20′)-tetraen-26′-ol from pennogenin diacetate under the action of BF3·Et2O

A new direction of the reaction of pennogenin diacetate with BF₃·Et₂O has been discovered in which a previously unknown dimeric steroid is formed — (25R,22R,25R)-3,3-diacetoxy-26,22-epoxy-16,16-bifurosta-5,20(22), 5,17(20)-tetraen-26-ol, the structure of which has been established as the result of an analysis of IR, UV,¹H and¹³C NMR, and mass spectra. A probable mechanism for the formation of the title compound from pennogenin diacetate is suggested.Pacific Ocean Institute of Bioorganic Chemistry, Far Eastern Branch, USSR Academy of Sciences, Vladivostok. Institute of Chemistry of Plant Substances, Uzbek SSR Academy of Sciences, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 202–208, March–April, 1990.     

Electronic effect of the 1-[η5-cyclgpentadienyl-η5-(3)-1,2-dicarbollyliron(II)] group

Conclusions The Taft method was used to determine the electronic effect of the 1-[⁵-cyclopenta-dienyl-⁵-(3)-1,2-dicarbollyliron(II) ] group which displays strong electron-donor properties: _I=–0.22 and _R=–0.20.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1449–1451, June, 1985.