Electrospun collagen-chitosan-TPU nanofibrous scaffolds for tissue engineered tubular grafts

The objective of this study is to design a novel kind of scaffolds for blood vessel and nerve repairs. Random and aligned nanofibrous scaffolds based on collagen-chitosan-thermoplastic polyurethane (TPU) blends were electrospun to mimic the componential and structural aspects of the native extracellular matrix, while an optimal proportion was found to keep the balance between biocompatibility and mechanical strength. The scaffolds were crosslinked by glutaraldehyde (GTA) vapor to prevent them from being dissolved in the culture medium. Fiber morphology was characterized using scanning electron microscopy (SEM) and atomic-force microscopy (AFM). Fourier transform infrared spectroscopy (FTIR) showed that the three-material system exhibits no significant differences before and after crosslinking, whereas pore size of crosslinked scaffolds decreased drastically. The mechanical properties of the scaffolds were found to be flexible with a high tensile strength. Cell viability studies with endothelial cells and Schwann cells demonstrated that the blended nanofibrous scaffolds formed by electrospinning process had good biocompatibility and aligned fibers could regulate cell morphology by inducing cell orientation. Vascular grafts and nerve conduits were electrospun or sutured based on the nanofibrous scaffolds and the results indicated that collagen-chitosan-TPU blended nanofibrous scaffolds might be a potential candidate for vascular repair and nerve regeneration.     

Electrospun cellulose acetate wound dressings loaded with Pramipexole for diabetic wound healing: an in vitro and in vivo study

In the current study, a Pramipexole-loaded wound dressing was produced via electrospinning of cellulose acetate solution. Pramipexole was added to cellulose acetate solution at 3, 5, and 10% w/w concentrations and then electrospun. The produced wound dressings were studied regarding their physicochemical and biological properties. Results of cell viability assay and cytoprotection studies showed that cellulose acetate wound dressings containing 3% w/w Pramipexole had significantly higher cell viability compared with other concentrations. The wound healing potential of dressings incorporated with 3% drug was studied in a rat model of diabetic wound. Study showed that the cellulose acetate/3% Pramipexole scaffolds had significantly higher percentage of wound closure, epithelial thickness, and collagen deposition compared with drug-free dressings and control group. Gene expression study showed that the drug-loaded wound dressings could reduce oxidative stress and alleviate inflammation at significantly higher extent compared with other groups.

     

Synthesis and characterization of microcrystalline cellulose produced from bacterial cellulose

In this study, microcrystalline cellulose (MCC) was prepared from the acid hydrolysis of bacterial cellulose (BC) produced in culture medium of static Acetobacter xylinum. The MCC-BC produced an average particle size between 70 and 90 μm and a degree of polymerization (DP) of 250. The characterization of samples was performed by thermogravimetric analysis, X-ray diffraction, and scanning electron microscopy (SEM). The MCC shows a lower thermal stability than the pristine cellulose, which was expected due to the decrease in the DP during the hydrolysis process. In addition, from X-ray diffractograms, we observed a change in the crystalline structure. The images of SEM for the BC and MCC show clear differences with modifications of BC fiber structure and production of particles with characteristics similar to commercial MCC.     

In situ mineralization of hydroxyapatite on electrospun chitosan-based nanofibrous scaffolds

A biocomposite of hydroxyapatite (HAp) with electrospun nanofibrous scaffolds was prepared by using chitosan/polyvinyl alcohol (CS/PVA) and N-carboxyethyl chitosan/PVA (CECS/PVA) electrospun membranes as organic matrix, and HAp was formed in supersaturated CaCl2 and KH2PO4 solution. The influences of carboxylic acid groups in CECS/PVA fibrous scaffold and polyanionic additive poly(acrylic acid) (PAA) in the incubation solution on the crystal distribution of the HAp were investigated. Field-emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), wide-angle X-ray diffraction (WAXD), and Fourier transform infrared (FTIR) were used to characterize the morphology and structure of the deposited mineral phase on the scaffolds. It was found that addition of PAA to the mineral solution and use of matrix with carboxylic acid groups promoted mineral growth and distribution of HAp. MTT testing and SEM imaging from mouse fibroblast (L929) cell culture revealed the attachment and growth of mouse fibroblast on the surface of biocomposite scaffold, and that the cell morphology and viability were satisfactory for the composite to be used in bioapplications.     

Cell adhesive and growth behavior on electrospun nanofibrous scaffolds by designed multifunctional composites

Nanostructured biocomposite scaffolds of poly(l-lactide) (PLLA) blended with collagen (coll) or hydroxyapatite (HA), or both for tissue engineering application, were fabricated by electrospinning. The electrospun scaffolds were characterized for the morphology, chemical and tensile properties by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), water contact angle (WCA), Fourier transform infrared (FTIR) measurement, and tensile testing. Electrospun biocomposite scaffolds of PLLA and collagen or (and) HA in the diameter range of 200-700 nm mimic the nanoscale structure of the extracellular matrix (ECM) with a well-interconnection pore network structure. The presence of collagen in the scaffolds increased their hydrophility, and enhanced cell attachment and proliferation, while HA improved the tensile properties of the scaffolds. The biocompatibility of the electrospun scaffolds and the viability of contacting cells were evaluated by 4',6-diamidino-2-phenylindole dihydrochloride (DAPI) nuclear staining and by fluorescein diacetate (FDA) and propidium iodide (PI) double staining methods. The results support the conclusion that 293T cells grew well on composite scaffolds. Compared with pure PLLA scaffolds a greater density of viable cells was seen on the composites, especially the PLLA/HA/collagen scaffolds.     

Antibacterial and wound healing properties of cellulose acetate electrospun nanofibers loaded with bioactive glass nanoparticles; in-vivo study

Bioactive glasses (BGs) have gained great attention owing to their versatile biological properties. Combining BG nanoparticles (BGNPs) with polymeric nanofibers produced nanocomposites of great performance in various biomedical applications especially in regenerative medicine. In this study, a novel nanocomposite nanofibrous system was developed and optimized from cellulose acetate (CA) electrospun nanofibers containing different concentrations of BGNPs. Morphology, IR and elemental analysis of the prepared electrospun nanofibers were determined using SEM, FT-IR and EDX respectively. Electrical conductivity and viscosity were also studied. Antibacterial properties were then investigated using agar well diffusion method. Moreover, biological wound healing capabilities for the prepared nanofiber dressing were assessed using in-vivo diabetic rat model with induced wounds. The fully characterized CA electrospun uniform nanofiber (100–200 nm) with incorporated BGNPs exhibited broad range of antimicrobial activity against gram negative and positive bacteria. The BGNP loaded CA nanofiber accelerated wound closure efficiently by the 10th day. The remaining wound areas for treated rats were 95.7?±?1.8, 36.4?±?3.2, 6.3?±?1.5 and 0.8?±?0.9 on 1st, 5th, 10th and 15th days respectively. Therefore, the newly prepared BGNP CA nanocomposite nanofiber could be used as a promising antibacterial and wound healing dressing for rapid and efficient recovery.

     

Hybrid electrospun nonwovens from chitosan/cellulose acetate

Co-mixtures of chitosan (CS) and cellulose acetate (CA) were electrospun into fibrous webs from a binary co-solvent containing 70:30 trifluoroacetic acid (TFA): methylene chloride (DCM). Fibrous webs were produced from CS/CA in ratios (wt%) of 20:80, 40:60, 50:50 and 60:40. As determined by SEM analysis, 12% polymer solutions of CS/CA 60:40 produced structures with uniform bead free fibre morphologies with an average fibre diameter of 458 nm. FTIR-spectroscopy confirmed the presence of CS in the as-spun fibres in the form of chitosan-amine trifluoroacetate salts (NH₃ ⁺CF₃COO⁻). Uniform mixing of the CS and CA components was confirmed by DSC analyses. Alkaline neutralisation of the chitosan amine salts was explored as a means of increasing wet stability. The as-spun fibres were found to be relatively unstable in aqueous medium due to the solubility of the chitosan amine salts. Alkaline post-neutralisation was evaluated as means of minimising weight loss and maximising retention of fibrous structure.     

Controlled release of doxorubicin from electrospun MWCNTs/PLGA hybrid nanofibers

In this study, multiwalled carbon nanotubes (MWCNTs) were used to encapsulate a model anticancer drug, doxorubicin (Dox). Then, the drug-loaded MWCNTs (Dox/MWCNTs) with an optimized drug encapsulation percentage were mixed with poly(lactide-co-glycolide) (PLGA) polymer solution for subsequent electrospinning to form drug-loaded composite nanofibrous mats. The structure, morphology, and mechanical properties of the formed electrospun Dox/PLGA, MWCNTs/PLGA, and Dox/MWCNTs/PLGA composite nanofibrous mats were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, and tensile testing. In vitro viability assay and SEM morphology observation of mouse fibroblast cells cultured onto the MWCNTs/PLGA fibrous scaffolds demonstrate that the developed MWCNTs/PLGA composite nanofibers are cytocompatible. The incorporation of Dox-loaded MWCNTs within the PLGA nanofibers is able to improve the mechanical durability and maintain the three-dimensional structure of the nanofibrous mats. More importantly, our results indicate that this double-container drug delivery system (both PLGA polymer and MWCNTs are drug carriers) is beneficial to avoid the burst release of the drug and able to release the antitumor drug Dox in a sustained manner for 42 days. The developed composite electrospun nanofibrous drug delivery system may be used as therapeutic scaffold materials for post-operative local chemotherapy.     

Electrospun PDA‐CA Nanofibers toward Hydrophobic Coatings

Nowadays, encapsulated dyes in a polymeric matrix have opened up new perspectives in many applications such as filtration of subatomic particles, composite reinforcement, multifunctional membranes, tissue engineering scaffolds, wound dressing, coatings, medical purposes as well as sensors. In the presented work, we report on electrospinning neat peryelene dianhydride based thermoplastic elastomers. Perylene‐3, 4,9, 10‐tetracarboxylic dianhydride (PDA) is encapsulated into cellulose acetate (CA) electrospun fibers, which was prepared from 12 % cellulose acetate solution, at 20 kV with a distance of 10 cm. The flow rate was 0.2 ml · h^–1. These water repellent nanofibrous coatings are anticipated to serve as hydrophobic coatings. Scanning electron microscope is used to study the properties of the electrospun PDA‐CA nanofibers.     

A nanofibrous composite membrane of PLGA-chitosan/PVA prepared by electrospinning

Tissue engineering scaffolds produced by electrospinning feature a structural similarity to the natural extracellular matrix. In this study, poly(lactide-co-glycolide) (PLGA) and chitosan/poly(vinyl alcohol) (PVA) were simultaneously electrospun from two different syringes and mixed on the rotating drum to prepare the nanofibrous composite membrane. The composite membrane was crosslinked by glutaraldehyde vapor to maintain its mechanical properties and fiber morphology in wet stage. Morphology, shrinkage, absorption in phosphate buffered solution (PBS) and mechanical properties of the electrospun membranes were characterized. Fibroblast viability on electrospun membranes was discussed by MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assay and cell morphology after 7 days of culture. Results indicated that the PBS absorption of the composite membranes, no matter crosslinked or not, was higher than the electrospun PLGA membrane due to the introduction of hydrophilic components, chitosan and PVA. After crosslinking, the composite membrane had a little shrinkage after incubating in PBS. The crosslinked composite membrane also showed moderate tensile properties. Cell culture suggested that electrospun PLGA-chitosan/PVA membrane tended to promote fibroblast attachment and proliferation. It was assumed that the nanofibrous composite membrane of electrospun PLGA-chitosan/PVA could be potentially used for skin reconstruction.     

Gallic acid‐loaded electrospun cellulose acetate nanofibers as potential wound dressing materials

Gallic acid (GA)–loaded cellulose acetate (CA) nanofiber mats with 10 to 40 wt.% GA contents (based on the weight of CA) were fabricated by electrospinning. The effects of GA contents and applied potential on the morphology and the average diameters of fibers were studied. The electrospun fiber mats containing 20 and 40 wt.% GA were investigated for their potential use as carrier of GA in wound dressing application. The GA‐loaded CA films were prepared by solvent casting technique for use in comparative studies. Determination of the release characteristics of GA from the GA‐loaded fiber mats and films was carried out by the total immersion and the transdermal diffusion through a pig skin method in acetate buffer solution (pH 5.5) or normal saline (pH 7.0) at either 32 or 37°C, respectively. In the total immersion method, the maximum amounts of the GA released from the fiber mats containing 20 and 40 wt.% GA in the acetate buffer were approximately 97% and 71% (based on the weight of initial GA), while those of the GA released into the normal saline were approximately 96% and 81%, respectively. Lower values were observed in the experiments of the transdermal diffusion through a pig skin method. The corresponding GA‐loaded CA films showed the lower amounts of GA released into media. The as‐loaded and the as‐released GA remained its antioxidant activity as investigated by 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) assay. Lastly, the GA‐loaded CA fiber mats exhibited antibacterial activity against Staphylococcus aureus, which showed the potential for use as wound dressing materials.     

Comparing microcrystalline with spherical nanocrystalline cellulose from waste cotton fabrics

Microcrystalline cellulose (MCC) and spherical nanocrystalline cellulose (SNCC) were successfully prepared from waste cotton fabrics through acid hydrolysis. The comparative analysis of the morphology and structure between the obtained MCC and SNCC was carried out. The SNCC suspension exhibited higher stability than the MCC suspension. Transmission electron microscopy in combination with atomic force microscopy showed that the cellulose nanospheres with average size of 35?nm were achieved, while the average particle size of MCC was 49?μm. The MCC and SNCC had similar functional groups and crystalline structure as confirmed by Fourier transform infrared spectroscopy and X-ray diffraction analysis, respectively. Viscometric average molecular weight measurement and thermo gravimetric analysis indicated that the degree of polymerization and thermal stability of SNCC was lower than that of MCC. These results should improve understanding of the characteristics of MCC and SNCC derived from waste cotton fabrics and lead to many new applications.     

Bacterial cellulose/poly(ethylene glycol) composite: characterization and first evaluation of biocompatibility

Bacterial cellulose (BC)/poly(ethylene glycol) (PEG) composite was prepared by immersing wet BC pellicle in PEG aqueous solution followed by freeze-drying process. The product looks like a foam structure. The morphology of BC/PEG composite was examined by scanning electron microscope (SEM) and compared with pristine BC. SEM images showed that PEG molecules was not only coated on the BC fibrils surface but also penetrated into BC fiber networks. It has very well interconnected porous network structure and large aspect surface. The composite was also characterized by Fourier transform infrared spectrum, X-ray diffraction, thermogravimetric analysis (TGA) and tensile test. It was found that the presence of PEG affected the preferential orientation of the (1[`1]0 1\bar{1}0 ) plane during the drying process of BC pellicle, which in turn decrease the crystallinity of dried BC. The TGA result showed that the thermal stability was improved from 263 to 293 °C, which might be associated with strong interaction between BC and PEG. Tensile test results indicate that the Young’s modulus and tensile strength tend to decrease. Biocompatibility of composite was preliminarily evaluated by cell adhesion studies using 3T3 fibroblast cells. The cells incubated with BC/PEG scaffolds for 48 h were capable of forming cell adhesion and proliferation, which showed much better biocompatibility than the pure BC. The prepared BC/PEG scaffolds can be used for wound dressing or tissue-engineering scaffolds.     

Preparation of submicron‐scale,electrospun cellulose fibers via direct dissolution

Cellulose nonwoven mats of submicron‐sized fibers (150 nm–500 nm in diameter) were obtained by electrospinning cellulose solutions. A solvent system based on lithium chloride (LiCl) and N,N‐dimethylacetamide (DMAc) was used, and the effects of (i) temperature of the collector, (ii) type of collector (aluminum mesh and cellulose filter media), and (iii) postspinning treatment, such as coagulation with water, on the morphology of electrospun fibers were investigated. The scanning electron microscopy (SEM) and X‐ray diffraction studies of as‐spun fibers at room temperature reveal that the morphology of cellulose fibers evolves with time due to moisture absorption and swelling caused by the residual salt and solvent. Although heating the collector greatly enhances the stability of the fiber morphology, the removal of salt by coagulation and DMAc by heating the collector was necessary for the fabrication of dry and stable cellulose fibers with limited moisture absorption and swelling. The presence and removal of the salt before and after coagulation have been identified by electron microprobe and X‐ray diffraction studies. When cellulose filter media is used as a collector, dry and stable fibers were obtained without the coagulation step, and the resulting electrospun fibers exhibit good adhesion to the filter media. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1673–1683, 2005     

Thermal analysis and crystallinity study of cellulose nanofibril-filled polypropylene composites

The isothermal and non-isothermal decompositions of cellulose nanofiber (CNF) and microfibrillated cellulose (MFC)-filled polypropylene (PP) composites were evaluated and compared with microcrystalline cellulose (MCC)-filled composites by means of thermogravimetric analysis (TG). X-ray diffraction was employed to evaluate crystallinity of the composites. The degree of maximum thermal degradation (ultimate DTG peak value) increased and thermal degradation onset temperature decreased as the cellulose content increased because the thermal stability of cellulose fillers is lower than that of neat PP, but the thermal degradation of the composite was hindered at higher temperature conditions because of the increased residual mass content of the cellulose nanofibril fillers compared to the matrix polymer. The isothermal residual mass of the cellulose nanofibril-filled PP composites under melt blending and injection molding temperatures was decreased marginally by incorporation of the cellulose reinforcement but still exhibited considerable isothermal stability. The raw materials and composites examined in this study were not affected by the manufacturing process temperatures utilized to produce the composites. The MCC decreased the composite crystallinity while the nano-sized cellulose (CNF and MFC) did not appear to have an effect on crystallinity.     

超声波活化处理对微晶纤维素结构和氧化反应性能的影响

采用无污染的超声波技术预处理微晶纤维素, 研究了微晶纤维素在活化前后的超分子结构、形态结构和可及度的变化, 超声波活化对微晶纤维素选择性氧化性能的影响.     

HPMC crosslinked chitosan/hydroxyapatite scaffolds containing Lemongrass oil for potential bone tissue engineering applications

The chitosan (CS), hydroxypropyl methyl cellulose (HPMC), hydroxyapatite (HAp and Lemon grass oil (LGO) based scaffolds was prepared by freeze gelation method. The composite formation was confirmed by FTIR (Fourier-transform infrared spectroscopy) analysis and surface morphology was evaluated by SEM (Scanning Electron Microscopy) analysis. The mechanical strength, biodegradation, swelling, porosity and antibacterial activity were evaluated on the basis of LGO contents. The scaffold structure was porous and the mechanical strength was enhanced as a function of LGO contents. The scaffold properties analysis revealed the biodegradation nature and swelling behavior of CS-HPMC-HAp-LGO was also affected significantly as a function of LGO contents. The cytotoxicity of CS-HPMC-HAp-LGO was studied against MC3T3-E1 cells and based on cell viability, no toxic sign was observed. The antimicrobial activity was evaluated against S. aureus and CS-HPMC-HAp-LGO scaffolds showed promising activity, which was varied as a function of LGO contents. The findings revealed that the CS-HPMC-HAp-LGO are biocompatible and have potential for bone tissue engineering.     

Effect of microcrystalline and nanocrystals cellulose fillers in materials based on PLA matrix

The aim of this work was to compare the effects of microcrystalline cellulose (MCC) and cellulose nanocrystals (CNC) addition on the properties of PLA matrix. The CNC were obtained by acid hydrolysis of the MCC. Both MCC and CNC were separately incorporated in PLA at ratios of 3, 5 and 7 wt%. In some compositions, organophilic silica (R972) was added to improve the cellulose-matrix compatibility. The properties of the materials were evaluated by FTIR, XRD, NMR and mechanical tests. Functional groups and crystalline structure of MCC and CNC were determined by FTIR and XRD, respectively. NMR T₁H values showed that films containing CNC presented better interfacial interaction than those containing MCC, and indicated that R972 acts as compatibilizer. MCC and CNC acted as nucleating agents for PLA crystallization and there was an improvement in the mechanical performance of materials with the addition of CNC.     

The electrospun poly(ε‐caprolactone)/fluoridated hydroxyapatite nanocomposite for bone tissue engineering

Biodegradable cell‐incorporated scaffolds can guide the regeneration process of bone defects such as physiological resorption, tooth loss, and trauma which medically, socially, and economically hurt patients. Here, 0, 5, 10, and 15 wt% fluoridated hydroxyapatite (FHA) nanoparticles containing 25 wt% F^? and 75 wt% OH^? were incorporated into poly(ε‐caprolactone) (PCL) matrix to produce PCL/FHA nanocomposite scaffolds using electrospinning method. Then, scanning electron microscopy (SEM), X‐ray diffraction (XRD) pattern, and Fourier transform infrared spectroscopy (FTIR) were used to evaluate the morphology, phase structure, and functional groups of prepared electrospun scaffolds, respectively. Furthermore, the tensile strength and elastic modulus of electrospun scaffolds were investigated using the tensile test. Moreover, the biodegradation behavior of electrospun PCL/FHA scaffolds was studied by the evaluation of weight loss of mats and the alternation of pH in phosphate buffer saline (PBS) up to 30 days of incubation. Then, the biocompatibility of prepared mats was investigated by culturing MG‐63 osteoblast cell line and performing MTT assay. In addition, the adhesion of osteoblast cells on prepared electrospun scaffolds was studied using their SEM images. Results revealed that the fiber diameter of prepared electrospun PCL/FHA scaffolds alters between 700 and 900 nm. The mechanical assay illustrated the mat with 10 wt% FHA nanoparticles revealed the highest tensile strength and elastic modulus. The weight loss alternation of mats determined around 1% to 8% after 30 days of incubation. The biocompatibility and cell adhesion of mats improved by increasing the amounts of FHA nanoparticles.     

Preparation and characterization of electrospun fibers based on poly(L-lactic acid)/cellulose acetate

PLLA/CA mixtures of different compositions were successfully electrospun to obtain composite nanofibrous membranes.The microstructures of the membrances changed from homogeneous to heterogeneous with the addition of CA, which was observed by FE-ESEM.The PLLA/CA fabric membranes were characterized by mechanical testing,DSC and contact angle measurements.The tensile stress of the composite fibrous membranes increased obviously with the increase of CA content.DSC results indicated that the CA component was the main factor for the changes of enthalpies in the composite fibers.Contact angle measurements showed the hydrophilicity of the electrospun nanofiber membranes was improved with the addition of CA.