Electrochemical activities of platinum-decorated multi-wall carbon nanotube/chitosan composites for the oxidations of alcohols

Electrooxidation of alcohols including methanol, ethanol, and isopropanol is studied on the modified solid glassy carbon electrodes with various amounts of platinum nanoparticles (PtNPs) immobilized on a composite of functionalized multi-walled carbon nanotubes (MWCNTs) and chitosan in an acidic solution. Here the chitosan is available as a binder to tightly anchor Pt nanoparticles onto the MWCNTs surfaces. MWCNTs/chitosan composite support can significantly improve the activity of the catalyst for alcohol oxidation and reduce the Pt catalyst loading. The calculated electrochemical active surface area is 379.2 m²/g Pt for PtNP–MWCNT/chitosan. Cyclic voltammetry and chronoamperometry techniques are employed for catalytic activity evaluation. The effects of operational parameters including platinum loading, concentration of the corresponding alcohol, concentration of the acid solution, scanning rate, and the final limit of anodic potential on the performance of the electrodes are also investigated.     

Synthesis and characterization of platinum catalysts on multiwalled carbon nanotubes by intermittent microwave irradiation for fuel cell applications

Pt electrocatalysts supported on multiwalled carbon nanotube (Pt/MWCNT) nanocomposites have been synthesized by a rapid intermittent microwave irradiation (IMI) technique for polymer electrolyte and direct methanol fuel cells (PEFCs and DMFCs), using H(2)PtCl(6) as Pt precursor. The Pt/MWCNT nanocomposites are characterized by XRD, XPS, and TEM. The results indicate that Pt particle size and distribution on the MWCNT support are affected significantly by the oxidation treatment of MWCNTs, the IMI procedure, and the MWCNT tube diameter or surface area. The PtO(x) (x = 1, 2) species was first deposited on the surface of MWCNTs by the IMI and subsequently reduced to Pt(0) with refluxing in the presence of HCOOH. Pt/MWCNT nanocomposites synthesized by this IMI method have achieved extremely uniform dispersed Pt nanoparticles with a particle size of approximately 3 nm. Electrochemical measurement indicates that Pt/MWCNT nanocomposites synthesized by the IMI method display a significantly higher electrochemically active area and higher catalytic activity for the methanol oxidation reaction in comparison to a commercial Pt/C catalyst.     

Electrodeposition and electrocatalytic properties of platinum nanoparticles on multi-walled carbon nanotubes: effect of the deposition conditions

Platinum (Pt) nanoparticles were electrochemically deposited on multi-walled carbon nanotubes (MWCNTs) through a three-step process, including an electrochemical treatment of MWCNT, electro-oxidation of PtCl₄ ²⁻ to Pt(IV) complex, and an electro-conversion of Pt(0) on MWCNT. The effect of formation conditions for Pt(IV) complexes on the Pt nanoparticals transformed was investigated. The structure and elemental composition of the resulting Pt/MWCNT electrode were characterized by transmission electron micrograph (TEM) and energy dispersive X-ray spectroscopy (EDX). The electrocatalytic properties of the resulting Pt/MWCNT electrode for methanol oxidation have been investigated. The high electrocatalytic activity and good stability of Pt/MWCNT electrode may be attributed to the high dispersion of platinum nanoparticles and the particular properties of the MWCNT supports.     

Ultrasonic assisted polyol synthesis of highly dispersed Pt/MWCNT electrocatalyst for methanol oxidation

A novel chemical method based on ultrasonic assisted polyol synthesis for the fabrication of highly dispersed Pt nanoparticles on multi-walled carbon nanotubes (MWCNTs) was developed. The simple and green method took only about 10 min at ambient temperature. The structure and chemical nature of the resulting Pt/MWCNT composites were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy dispersive X-ray spectrometry (EDS). The results showed that the prepared Pt nanoparticles were uniformly dispersed on the MWCNT surface. The mean size of Pt nanoparticles was about 2.8 nm. Electrochemical properties of Pt/MWCNT electrode for methanol oxidation were examined by cyclic voltammetry (CV) and excellent electrocatalytic activities could be observed. The possible formation mechanism of Pt/MWCNTs was also discussed.     

Electrochemical deposition of platinum nanoparticles in multiwalled carbon nanotube–Nafion composite for methanol electrooxidation

Platinum nanoparticles were successfully deposited within a multiwalled carbon nanotube (MWCNT)–Nafion matrix by a cyclic voltammetry method. A Pt(IV) complex was reduced to platinum nanoparticles on the surface of MWCNTs. The resulting Pt nanoparticles were characterized by scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The Pt–MWCNT–Nafion nanocomposite film-modified glassy carbon electrode had a sharp hydrogen desorption peak at about −0.2 V vs. Ag/AgCl (3 M) in a solution of 0.5 M H₂SO₄, which is directly related to the electrochemical activity of the Pt nanoparticles presented on the surface of MWCNTs. The electrocatalytic properties of the Pt–MWCNT–Nafion nanocomposite-modified glassy carbon electrode for methanol electrooxidation were investigated by cyclic voltammetry in a 2 M CH₃OH + 1 M H₂SO₄ solution. In comparison with the Pt-coated glassy carbon electrode and the Pt–Nafion modified glassy carbon electrode, the Pt–MWCNT–Nafion-modified electrode had excellent electrocatalytic activity toward methanol electrooxidation. The stability of the Pt–MWCNT–Nafion nanocomposite-modified electrode had also been evaluated.     

Pt–Ni alloy nanoparticles supported on multiwalled carbon nanotubes for methanol oxidation in alkaline media

The Pt–Ni alloy nanoparticles with different Pt/Ni atomic ratios supported on functionalized multiwalled carbon nanotubes surface were synthesized via an impregnation-reduction method. The nanocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical techniques. XRD demonstrated that Pt was alloyed with Ni. TEM showed that the Pt–Ni alloy nanoparticles were uniformly dispersed on the multiwalled carbon nanotubes (MWCNTs) surface, indicating appropriate amount of Ni in Pt–Ni alloy which facilitates the dispersion of nanoparticles on the MWCNT surface. XPS revealed that the Pt 4f peak in Pt–Ni/MWCNT (4:1) catalyst shifted to a lower binding energy compared with Pt/MWCNT catalyst, and nickel oxides/hydroxides such as NiO, Ni(OH)₂, and NiOOH were on the surface of Pt–Ni nanoparticles. Electrochemical data based on cyclic voltammetry and chronoamperometric curves indicated that Pt–Ni (4:1) alloy nanoparticles exhibited distinctly higher activity and better stability than those of Pt/MWCNTs toward methanol oxidation in alkaline media.     

Promoting performance and CO tolerance of Pt nanocatalyst for direct methanol fuel cells by supporting on high-surface-area silicon carbide

SiC-supported Pt nanocatalyst was prepared by electrodeposition of Pt nanoparticles on the surface of high-surface-area SiC, which was fabricated by a versatile carbothermal reduction method. Characterization studies show that such synthesis protocol leads to well distribution of Pt nanoparticles, with a mean particle size of 2.9 nm on the support. This catalyst has been electrochemically characterized toward methanol oxidation, which exhibits higher catalytic activity, durability, and electrochemical active surface area than the electrodeposited Pt on multiwalled carbon nanotubes (MWCNTs). Further investigation reveals that the SiC-supported Pt also shows superior CO tolerance to Pt/MWCNTs. These results suggest that high-surface-area SiC could be a promising supporting material for constructing high-performance methanol oxidation electrocatalysts.     

Synthesis and field emission properties of carbon nanotube films modified with amorphous carbon nanoparticles by a simple electrodeposition method

Amorphous carbon nanoparticles （a-CNPs） on a multi-walled carbon nanotube （MWCNT） film, deposited on a silicon substrate, were synthesized using an electrodeposition combination from a methanol suspension of polydiallyldimethylammonium chloride-modified MWCNTs. A low-voltage electropho- retic deposition of the MWCNTs and a high-voltage electrochemical deposition of the a-CNPs were carried out to yield homogenously attached a-CNPs on the surfaces of the MWCNTs, and form a composite film with good adhesion to the substrate. This scalable technology can produce a large area of a-CNP/MWCNT film. And the field emission investigations show that the a-CNP/MWCNT film has turn- on electric field of 3.17 V μm- 1 （at 10 μA cm-2） and threshold field of 4.62 V μm-1 （at 1 mA cm-2）, which are lower than those of the MWCNT film. The a-CNP/MWCNT film can be deposited simply with large areas and may be a promising cathode material applied in field emission displays.     

Pt/CNT纳米催化剂的微波快速合成及其对甲醇电化学氧化的电催化性能

碳纳米管 (CNT)作为制备新型催化剂载体已有广泛的研究 [1～ 8] ,例如 ,在其表面负载 Pt,Ru和Pt Ru后则具有良好的催化性能[1,2 ,6～ 8] .但在 CNT表面负载金属微粒的方法难以获得尺寸和形状均匀的纳米粒子 .因此 ,如何制备超细和均匀的纳米粒子是一项具有重要的学术意义和技术价值的工作 .我们利用微波加热的多元醇工艺合成了 XC-72碳负载铂纳米粒子的催化剂 ,并发现它对甲醇的氧化具有较高的电催化活性 [9] .本文进一步以 CNT作为载体 ,利用微波加热法快速合成了 Pt/ CNT纳米催化剂 ,并对其对甲醇电化学氧化的性能进行了初步研究 …     

Amphiphilic block copolymer-stabilized PtRu nanoparticles highly dispersed on multi-walled carbon nanotube for methanol oxidation

We report a one-pot synthesis of amphiphilic block copolymer-stabilized PtRu nanoparticle modified multi-walled carbon nanotubes (MWCNTs) using RuCl(3)·xH(2)O and H(2)PtCl(6)·6H(2)O as ruthenium and platinum sources, and block copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) as stabilizer agent. PtRu alloyed nanoparticles with an average diameter of 4.6nm are well decorated homogeneously on the exterior surfaces of the MWCNTs. The electrochemical catalytic activity for methanol oxidation of PtRu/MWCNTs and commercial PtRu/C (E-TEK) is comparatively investigated using cyclic voltammetry and chronoamperometry. It is revealed that the PtRu nanoparticle modified MWCNT samples display an enhanced electrochemical catalytic activity than commercial PtRu/C electrode. These results show that PtRu nanoparticles may find applications to fuel cells.     

A novel Pt/Au/C cathode catalyst for direct methanol fuel cells with simultaneous methanol tolerance and oxygen promotion

A novel Pt/Au/C catalyst was prepared by depositing the Pt and Au nanoparticles on the carbon support. The synthesized catalysts were characterized by energy-dispersive X-ray (EDX) and transmission electron microscopy (TEM), and electrochemically analyzed for activity towards oxygen-reduction reaction and methanol oxidation reaction. EDX and TEM results reveal that Pt nanoparticles supported on carbon supports were separated by Au nanoparticles. The electrochemical analysis indicate that the novel catalyst showed the enhanced methanol tolerance while maintaining a high catalytic activity for the oxygen-reduction reaction, which could be attributed to the less methanol adsorption on Pt/Au/C catalyst.     

The origin of the high performance of tungsten carbides/carbon nanotubes supported Pt catalysts for methanol electrooxidation

The Pt supported on WC modified MWCNT catalysts (PtWC/MWCNT) were synthesized by the combination of organic colloidal and intermittent microwave heating (IMH) methods for the first. The results proved the better performance of the PtWC/MWCNT catalyst than that of Pt/C for methanol oxidation in terms of the onset potential and peak current density. The synergistic effect between Pt nanoparticles and WC and the structure effect of the MWCNTs could be the reasons to result in the high activity. The CO stripping test provided the evidence that the onset potential shift for methanol oxidation is consistent with the reduction in the overpotential for the CO oxidation on PtWC/MWCNT catalyst. Therefore, the mechanism of the high performance for methanol oxidation on PtWC/MWCNT catalyst is probably the easier oxidation of CO-like species which cause high overpotential for further oxidation of methanol.     

三元复合材料PANI／Ag／MWNT的电化学行为和比电容

通过原位聚合的方式在银纳米粒子/多壁碳纳米管（Ag/MWCNT）复合材料的表面成功聚合苯胺单体制备了聚苯胺/银纳米粒子/多壁碳纳米管（PANI/Ag/MWCNT）三元复合材料苯．通过对三元复合材料的结构以及表面形貌进行分析,表明聚苯胺层完全包覆了Ag/MWCNT复合材料,形成了核壳式结构．同时银纳米粒子则以单质晶体的形态存在于多壁碳纳米管与聚苯胺层之间．三元复合材料电极在1 mol/L的KOH溶液中具有极低的阻抗,而与聚苯胺电极相比,这些复合材料电极则表现出更低的电阻、更高的电化学活性和更好的循环稳定性．尤其是当苯胺和Ag：MWCNTs质量比为5：5时,该复合材料电极在0.25 A/g的电流密度下表现出最大的比电容值为160 F/g．     

导电共聚物衍化新策略制备硫、氮共掺杂碳纳米管及其对改善PtCu纳米晶分散性与甲醇电催化氧化的促进作用

有效调控碳纳米材料的几何和电子结构的协同效应和缺陷是获得优良电化学性能的关键.然而,如何设计一种具有优势结构的杂化材料及对其电催化机理的认识尚不清楚.本文提出了一种聚(3,4-乙撑二氧噻吩)/聚苯胺导电共聚物热解策略来制备S和N共掺杂多壁碳纳米管(MWCNTs),发现改变前驱体溶液中两种单体的比例可以调控掺杂MWCNT...     

Self‐Assembly of Platinum Nanoparticle/Multiwalled Carbon Nanotube Multilayer Film on Au Substrate Electrode

A novel approach to assemble multilayer films of Pt nanoparticle/multiwalled carbon nanotube (MWNTs) composites on Au substrate has been developed for the purpose of improving the methanol oxidation efficiency by providing high catalytic surface area. MWNTs were firstly functionalized with 4‐mercaptobenzene and then assembled on an Au substrate electrode. Pt nanoparticles were fabricated and attached to the surface of the functionalized MWNTs subsequently. Thus a layer of Pt/MWNT composites were assembled on the Au substrate electrode. Repeating above process can assemble different layers of film of Pt/MWNTs composites on the Au electrode. Cyclic voltammetry shows that the Au electrode modified with two layers of film of Pt/MWNT composites exhibits high catalytic ability and long‐term stability for methanol oxidation. The layer‐by‐layer self‐assembly technique provides an efficient strategy to construct complex nanostructure for improving the methanol oxidation efficiency by providing high catalytic surface area.     

Controllable pt nanoparticle deposition on carbon nanotubes as an anode catalyst for direct methanol fuel cells

We report a novel process to prepare well-dispersed Pt nanoparticles on CNTs. Pt nanoparticles, which were modified by the organic molecule triphenylphosphine, were deposited on multiwalled carbon nanotubes by the organic molecule, which acts as a cross linker. By manipulating the relative ratio of Pt nanoparticles and multiwalled carbon nanotubes in solution, Pt/CNT composites with different Pt content were achieved. The so-prepared Pt/CNT composite materials show higher electrocatalytic activity and better tolerance to poisoning species in methanol oxidation than the commercial E-TEK catalyst, which can be ascribed to the high dispersion of Pt nanoparticles on the multiwalled carbon nanotube surface.     

多壁碳纳米管负载Pd-Ni电催化剂对乙二醇的电催化氧化

采用微波加热还原法制备了不同化学计量比的Pd-Ni复合多壁碳纳米管(Pd-Ni/MWCNT)催化剂. 通过X射线衍射(XRD)、透射电镜(TEM)和能量散射谱(EDS)等微结构和组成表征表明, 所合成的催化剂中Pd-Ni合金具有较小的纳米颗粒以及较好的分散程度. 循环伏安(CV)、线性扫描(LSV)、计时电流方法(CA)和交流阻抗(EIS)等测试表明, Pd-Ni(3:1)/MWCNT催化剂对乙二醇的电化学氧化具有较高的催化活性.     

Functionalization of tungsten oxide into MWCNT and its application for sunlight-induced degradation of rhodamine B

A composite of multi-walled carbon nanotube/tungsten oxide (MWCNT/WO(3)) has been successfully synthesized. The prepared composite was characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), high-resolution transmission electron microscopy (HRTEM) and Fourier transform infrared spectroscopy (FTIR). The catalytic activity was investigated by rhodamine B degradation under solar irradiation. The influence of various degradation parameters such as solar illumination time, initial dye concentration, dosage and pH was investigated. It was found that the composite exhibits an enhanced photocatalytic activity as compared with WO(3) and a mechanical mixture of MWCNTs and WO(3). The enhancement in photocatalytic performance of the MWCNT/WO(3) composite has been explained based on adsorption ability and electron transportation as a result of a strong interaction between WO(3) and MWCNTs. Besides, MWCNTs acts as dispersing agent preventing WO(3) from agglomerating during the catalytic process, providing a high active surface area of the catalyst. A reasonable mechanism for the enhanced reactivity was proposed.     

Multiwalled carbon nanotube supported PtRu for the anode of direct methanol fuel cells

The activity of the methanol oxidation reaction of a multiwalled carbon nanotube (MWCNT)-supported PtRu catalyst was investigated and compared with the Vulcan XC-72 carbon-supported catalyst. The PtRu nanoparticles with 1:1 and 7:3 atomic ratios (with similar PtRu loadings and morphological structures) were deposited both on the MWCNTs and on the carbon. Cyclicvoltammetry results demonstrated that the MWCNT-supported PtRu catalyst exhibited a higher mass activity (mA mg(-1) of PtRu) for the methanol oxidation reaction than the carbon-supported PtRu under the condition that both catalysts possess more or less the same PtRu loadings, particle sizes, dispersions, and electrochemical surface area. The direct methanol fuel cell performance test data showed that MWCNT-supported PtRu catalysts yielded about 35-39% higher power densities than the carbon-supported PtRu.     

醇在载钯碳化钨/碳纳米管催化剂上的氧化

用交替微波法制备了碳化钨与多壁碳纳米管复合材料(WC/MWCNT),以该材料为载体制备了Pd基催化剂(Pd-WC/MWCNT),并将催化剂用于醇的催化氧化反应.结果表明,Pd-WC/MWCNT催化剂对乙醇的催化氧化活性是Pd/C催化剂的5倍.交换电流密度测量和反应活化能计算表明,Pd-WC/WIWCNT催化剂对乙醇催化氧化的交换电流密度比Pd/C大两个数量级,反应活化能低一倍以上.Pd-WC/MWCNT催化剂催化氧化乙醇性能的大幅度提高是碳化钨与Pd颗粒的协同效应和碳纳米管的结构效应共同作用的结果.