Synthesis and characterization of CeFeO3 photocatalyst used in photocatalytic bleaching of gentian violet

Ternary oxides have been used as effective photocatalyst for carrying out number of chemical reactions. Method of preparation has major effect on the performance of these mixed oxide catalysts. In the present work, cerium iron oxide catalyst was synthesized using co-precipitation method and specific heating cycle. Synthesized catalyst was characterized using X-ray diffraction patterns. Photocatalytic degradation on gentian violet dye was observed using this catalyst and progress of the reaction was monitored spectrophotometrically. The effect of variation of different parameters like concentration of gentian violet, pH, amount of semiconductor and light intensity was also studied. A tentative mechanism for the photocatalytic bleaching of gentian violet has been proposed.     

Sunlight-induced photocatalytic degradation of acetaminophen over efficient carbon doped TiO2 (CTiO2) nanoparticles

Carbon doped titanium oxide (CTiO₂) photocatalyst was successfully synthesized by the sol–gel method. The crystal structure, surface morphology, and optical properties of CTiO₂ have been characterized by X-ray diffraction, Brunauer–Emmett–Teller surface area (S_BET), scanning electron microscope, UV–Vis, X-ray spectroscopy (EDS), Fourier transform infrared and X-ray photoelectron spectroscopy. The photocatalytic degradation of acetaminophen (AMP) in aqueous solution, seawater, and polluted seawater has been investigated by using the synthesized photocatalyst under irradiation of UV and natural sunlight. The effectiveness of CTiO₂ compared to pure TiO₂ toward the photocatalytic removal of AMP was significantly observed. The optimized conditions including catalyst dose, initial concentration of AMP and solution pH were also studied for effective photocatalytic removal. The highest degradation rate was obtained when 2.0 g L^?1 of the catalyst was used at pH 7. The kinetic results revealed that the photocatalytic degradation of AMP using CTiO₂ obeyed a pseudo-first-order reaction kinetics.

     

Green and facile microwave-assisted synthesis of TiO2/graphene nanocomposite and their photocatalytic activity for methylene blue degradation

TiO₂ (P25)/graphene nanocomposite photocatalyst have been successfully synthesized with P25 and different ratios of graphene oxide through a green and facile one-step microwave-assisted method. Graphene oxide was restored to graphene sheets and P25 was coated on it simultaneously during the reaction. The method offers easy access to the semiconductor/graphene nanocomposites with a uniform coating and strong interactions between semiconductor and the underlying graphene sheets. The prepared P25/graphene nanocrystals hybrid has superior photocatalytic activity in the degradation of methylene blue, showing an impressive photocatalytic enhancement over P25. The improved photocatalytic activities may be attributed to increased adsorptivity of dyes, extended light absorption range, and efficient charge separation properties of a two-dimensional graphene network.     

铁酸镍纳米微粒的固相合成及其催化性能

微波辐射;乙苯脱氢;铁酸镍纳米微粒的固相合成及其催化性能     

有机改性TiO2光催化剂的制备及可见光催化性能

以染料黄叱精(Chrysoidine G)和TiO₂ (Degussa P25)为原料, 利用甲苯二异氰酸酯为桥连体, 成功合成了一种有机改性的TiO₂光催化剂. 采用XRD, TEM, FT-IR, UV-Vis对所得催化剂进行了表征, 以亚甲基蓝降解为探针反应, 考察其可见光催化性能. 结果表明: 甲苯二异氰酸酯在黄叱精和TiO₂之间形成了稳定的化学键, 从而实现了对TiO₂的表面有机改性; 改性后的TiO₂在可见光区(400～550 nm)有明显的吸收; 与未改性TiO₂相比, 有机改性的TiO₂催化剂在可见光照射下表现出了很好的光催化性能.     

Applications of Single-site Photocatalysts to the Design of Unique Surface Functional Materials

The isolated and tetrahedrally coordinated metal oxide (Ti, V, Cr, Mo and W-oxides) moieties can be included in the silica matrixes of silica-based microporous zeolite and mesoporous silica materials and named as “single-site photocatalysts”. Under UV-light irradiation these single-site photocatalysts form the charge transfer excited state, i.e., the excited electron–hole pair state which is located quite near to each other in different from the manner observed on semiconducting materials such as TiO₂, and play a significant role in various photocatalytic reactions. These single-site photocatalysts not only can promote photocatalytic reactions but also can be utilized to synthesis of functional materials. The nano-sized metal catalyst and visible-light sensitive binary oxide photocatalyst can be synthesized on the excited single-site photocatalyst under UV-light irradiation. The transparent mesoporous silica thin film with single-site photocatalyst generates the super-hydrophilic surface. In this review, our recent applications of single-site photocatalysts to synthesis of the surface functional materials have been introduced.     

Mg-Al-碱土金属复合氧化物为载体的钌基氨合成催化剂制备及性质研究

因在科学研究中的基础地位和工业应用上的巨大价值,合成氨催化剂的研究一直是催化科学研究的一个重要领域[1,2]。由于第一代铁基氨合成催化剂存在着能耗高和易中毒的缺点,1970年以来人们将注意力逐渐转向具有低温低压高活性且活性中心金属可回收等优点的钌基合成氨催化剂。做为     

AgBr/nanoAlMCM-41 visible light photocatalyst for degradation of methylene blue dye

A novel photocatalytic material was synthesized by dispersion of AgBr in nanoAlMCM-41 material. The AgBr/nanoAlMCM-41 sample shows strong absorption in the visible region because of the plasmon resonance of Ag nanoparticles in AgBr/nanoAlMCM-41. The catalysts were characterized using XRD (X-ray diffraction), UV-visible diffused reflectance spectra (UV-vis DRS) and scanning electron microscopy (SEM). The photocatalytic activity and stability of the synthesized catalysts were evaluated for methylene blue (MB) degradation in aqueous solution in the presence of 200 W tungsten filament Philips lamp. Several parameters were examined, catalyst amount, pH and initial concentration of MB, AgBr loading. The effect of dosage of photocatalyst was studied in the range 0.05-1.00 g/L. It was seen that 0.1 g/L of photocatalyst is an optimum value for the dosage of photocatalyst. The support size was obtained about 9-100 nm. In the same way, the average size of AgBr nanoparticles was about 10nm before visible radiation. After visible radiation the average size of AgBr nanoparticles was about 25 nm.     

Molecular approaches towards mixed metal oxides and their behaviour in mixed oxide support Au catalysts for CO oxidation

We herein report a water-based sol-gel approach towards porous mixed Si/Ti oxides using co-precipitated glycol-modified precursors. By adjusting synthesis parameters such as the pH value and the Si/Ti ratio of the precursor, the morphology as well as the Si/Ti-composition of the resulting mixed oxide particles can be varied in a wide range. The behaviour of the mixed oxides as substrates for Au catalysts and the performance of the resulting catalysts in the CO oxidation reaction was investigated and compared to catalysts supported on mesoporous anatase and rutile synthesized analogously. For comparable Au particle sizes and Au loadings, the composition of the mixed oxide support was found to significantly affect the reactivity and reaction behaviour, with mixed oxide supported Au catalysts synthesized at pH=5 or 10 and with a Si/Ti-ratio of 1:19 and 1:34 exhibiting the maximum activity. In contrast to the enhanced activity, the mixed oxide supports do not lead to a significant improvement in deactivation behaviour and catalyst stability.     

Ag/AgCl@Cotton‐fabric:A Highly Stable and Easy‐recycling Plasmonic Photocatalyst under Visible Light Irradiation

Ag/AgCl@cotton‐fabric plasmonic photocatalyst has been synthesized by a facile method, which exhibits excellent stability for the decomposition of RhB and conveniency in the separation and recovery of the catalyst from the solution.     

Facile synthesis of Fe/Bi2SiO5 nanocomposite with enhanced photocatalytic activity for degradation of 17β-Estradiol(E2)

In the present work, element modification semiconductor photocatalyst Fe-Bi₂SiO₅ was successfully synthesized by combining the hydrothermal method and impregnation technique. The obtained photocatalysts were systematically characterized through XRD, SEM, XPS, BET and UV–Vis diffuse reflectance spectroscopy. The synthesized heterojunction Fe/Bi₂SiO₅ photocatalyst exhibited excellent photocatalytic activity for 17β-Estradiol(E2). While using 20 W mercury lamp as UV light source, the degradation efficiency of E2 by 5% Fe/Bi₂SiO₅ (the molar ratio of Fe/Bi was 5:100) at 60 min irradiation was 99.5%. The rate constant of E2 degradation on 5% Fe/Bi₂SiO₅ were about 3.42 times of the P25 and 2.63 times of the pure Bi₂SiO₅. The impact of catalyst loading and pH as well as the photocatalytic mechanism was investigated. The possible photocatalytic mechanism has been discussed on the basis of the theoretical calculation and the experimental results. The results of this study indicated that Fe/Bi₂SiO₅ was a stable and efficient photocatalyst, with promising practical applications.     

纳米银/二维石墨相氮化碳/还原氧化石墨烯复合材料的制备及其光催化降解抗生素

为优化石墨相氮化碳(g-C₃N₄)光催化剂的结构,改善其对污染物的降解性能,本文以三聚氰胺为前驱体,通过高温煅烧和热氧化剥离制备了二维石墨相氮化碳(2D-C₃N₄),并用光还原法一步合成纳米银/二维石墨相氮化碳/还原氧化石墨烯(Ag/2D-C₃N₄/rGO)复合光催化剂。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)、X射线光电子能谱(XPS)、氮气吸附脱附等温曲线(BET)等对材料进行表征。 以头孢曲松钠为目标污染物,探究pH值、催化剂用量、头孢曲松钠初始浓度等因素对催化剂的吸附、降解性能的影响,并探究降解反应机理。 当pH=6.0,催化剂用量为0.3 g/L,头孢曲松钠初始浓度为10.0 mg/L时,复合材料对头孢曲松钠的降解率可达到89.1%。 催化剂的稳定性较强,具有实际应用价值,可用于处理含头孢类抗生素的废水。     

Synthesis of a new magnetic nano-island titania photocatalyst and investigation of its photocatalytic activity

In this study, a new magnetic nano-island titania photocatalyst (Fe₃O₄@SiO₂·TiO₂) was designed and fabricated. Precipitation, sol-gel, and hydrothermal methods were utilized to synthesize the magnetite, silica shell, and titania islands, respectively. Characterization of the synthesized catalyst was carried out by XRD, EDS, FTIR, SEM, TEM, and VSM analysis. The TEM analysis revealed that the overall size of the catalyst is about 490 nm, and titania island on the magnetic core was about 50 nm. VSM analysis showed that the photocatalyst has a fantastic paramagnetic property with magnetic saturation of 52 emu g^?1. Furthermore, photocatalytic activity of the synthesized catalyst was evaluated in the removal of p-nitrophenol as a typical pollutant of nitro-aromatic compounds such that its degradation and mineralization efficiency were obtained at 82 and 45% after 100 and 200 min of the process, respectively, using 100 ppm of the photocatalyst in pH = 6.5.     

Role of surface-purity in photocatalytic activity of nanocrystalline anatase–titania processed via polymer-modified sol–gel

Nanocrystalline titania powders have been synthesized via conventional and modified sol–gel using an alkoxide precursor for different R, the ratio of molar concentration of water to that of alkoxide precursor, and calcination temperature. The apparent first-order reaction rate-constant obtained for the powder synthesized via conventional sol–gel is comparable with that of commercial Degussa-P25. Conventional sol–gel has been modified using the hydroxypropyl cellulose polymer to increase the specific surface area of the photocatalyst; and hence, to further enhance its photocatalytic activity. Although higher specific surface area and smaller average nanocrystallite size have been obtained for the powders synthesized via modified sol–gel, they exhibit reduced photocatalytic activity relative to that of powders synthesized via conventional sol–gel. The deactivation of the present photocatalyst has been explained on the basis of reduced surface-purity of the powders after processing via modified sol–gel as induced by the presence of surface-residual organic compounds.     

介孔Fe-Cu复合金属氧化物纳米粉催化剂催化低温CO氧化

以环氧丙烷为凝胶剂,采用简便低廉的无表面活性剂的溶胶-凝胶法制备了一系列不同Cu/Fe摩尔比的高比表面积介孔Fe-Cu复合氧化物纳米粉末。运用微反应器-色谱体系考察了它们在低温CO氧化反应中的催化性能。采用X射线衍射、N2吸附-脱附、热重-差热分析、程序升温还原、傅里叶变换红外光谱和透射电镜对所制样品进行了表征。结果表明,这些介孔Fe-Cu复合氧化物催化剂具有纳米晶结构、窄的孔径分布和高的比表面积,在低温CO氧化反应中表现出高的活性和稳定性。 CuO的添加影响了Fe2O3的结构和催化性能。当CuO含量为15 mol%时,催化剂具有最高的比表面积和催化活性,在低温CO氧化反应中表现出较高的催化稳定性。     

Synthesis,characterization and application of pH-sensitive CoFe2O4/reduced graphene oxide (RGO) nanocomposite in a circulated photocatalytic reactor for Reactive Red 141 removal of wastewaters

Research on Chemical Intermediates - In the present study, CoFe2O4/reduced graphene oxide nanocomposite (CoFe2O4/RGO) has been synthesized, characterized and applied as a photocatalyst for Reactive...     

Highly efficient Pt/TiO2 photocatalyst prepared by plasma-enhanced impregnation method

Highly efficient Pt/TiO₂ photocatalyst has been prepared using plasma-enhanced impregnation method. Impregnated 0.5 wt%Pt/TiO₂ was treated by plasma followed with thermal calcinations and hydrogen reduction. The catalyst characterizations show that Pt is highly dispersed with a size of 3–5 nm. UV–Vis reflection spectrum suggests it a high photosensitivity in near UV region. Such plasma prepared catalyst exhibits a much higher activity and better metal stability for hydrogen generation from methanol/water mixture, compared to the catalyst prepared conventionally. This highly efficient photocatalyst should have extensive applications in photocatalytic processes.     

酞菁钴界面修饰的CuχS·CdS复合硫化物光催化剂

报导了酞菁钴负载到ＣｕｘＳ和ＣｄＳ半导体办面合成的一种新型光催化剂，并对其光催化分解Ｈ２Ｓ的活性进行了考察，同时研究了酞菁 钴分子与半导体相互作用及其对催化性能的影响，实验结果表明，ＣｏＰｃ的负载能够显著提高复合硫化物催化剂光解Ｈ２Ｓ的活性，在一定条件下，能使反应速率提高２－３倍，活性的增加与ＣｏＰｃ加入量呈现非线性关系，且制备过程不同，催化剂活性的变化规律也不同。先负载到ＣｕｘＳ表面表现出更为明     

Effect of diluent and reaction parameter on selective oxidation of propane over MoVTeNb catalyst using nanoflow catalytic reactor

The selective oxidation of propane to acrylic acid over an MoVTeNb mixed oxide catalyst, dried and calcined before reaction has been studied using high-throughput instrumentation, which is called nanoflow catalytic reactor. The effects of catalyst dilution on the catalytic performance of the MoVTeNb mixed oxide catalyst in selective oxidation of propane to acrylic acid were also investigated. The effects of some reaction parameters, such as gas hourly space velocity （GHSV） and reaction temperature, for selective oxidation of propane to acrylic acid over diluted MoVTeNb catalyst have also been studied. The configuration of the nanoflow is shown to be suitable for screen catalytic performance, and its operating conditions were mimicked closely to conventional laboratory as well as to industrial conditions. The results obtained provided very good reproducibility and it showed that preparation methods as well as reaction parameters can play significant roles in catalytic performance of these catalysts.     

Hydrothermal Synthesis, Characterization and Catalytic Properties of Nanoporous MoO3/ZrO2 Mixed Oxide

Introduction Theisobutane/butenealkylationintherefiningin dustryforobtainingacleangasolinewithahigh octane valueisveryimportant[1,2].Sulfuricandhydrofluoric acidsareusedascatalystsinthecurrentindustrial processesfortheisobutane/butenealkylation,inwhich ca…