Microarray-based detection of Korean-specific <Emphasis Type="Italic">BRCA1</Emphasis> mutations

A reliable multiplex assay procedure to detect human genetic mutations in the breast cancer susceptibility gene BRCA1 using zip-code microarrays and single base extension (SBE) reactions is described. Multiplex PCR amplification was performed to amplify the genomic regions containing the mutation sites. The PCR products were then employed as templates in subsequent multiplex SBE reactions using bifunctional primers carrying a unique complementary zip sequence in addition to a mutation-site-specific sequence. The SBE primers, terminating one base before their mutation sites, were extended by a single base at a mutation site with a corresponding biotin-labeled ddNTP. Hybridization of the SBE products to zip-code microarrays was followed by staining with streptavidin–Cy3, leading to successful genotyping of several selected BRCA1 mutation sites with wild-type and heterozygote mutant samples from breast cancer patients. This work has led to the development of a reliable DNA microarray-based system for the diagnosis of human genetic mutations. Cheulhee Jung and Seong-Chun Yim contributed equally to this work.     

Strategy for high-fidelity multiplex DNA copy number assay system using capillary electrophoresis devices

Structural variation of human genome such as duplications and deletions, collectively termed copy number variation (CNV), is one of the major genetic variations. Reliable and efficient measurement of CNV will be essential to develop diagnostic tools for CNV-related diseases. We established a strategy based on multiplex PCR and capillary electrophoresis (CE) for reliable CNV assay. Multiplex-PCR was performed using five primer sets for target loci and a diploid control (DC). We designed primers satisfying three conditions: different size of each PCR product for CE separation, unified annealing temperature for multiplex PCR, and suitability for quantitative PCR (qPCR). We defined the accurate PCR cycles for quantification of copy numbers at which the amplifications for all targets were supposed to be exponential, named maximum doubling cycle. CE was carried out with PCR product and the ratio of the peak areas (target/diploid control) was calculated. Our multiplex PCR-CE analysis reliably determined copy numbers of X chromosome with variable copies ranging from 1 to 5 and showed higher reliability than qPCR (correlation coefficient 0.996 versus 0.898). When measuring the six randomly selected autosomal CNV targets using our multiplex PCR-CE, the results agreed with those from qPCR. In addition, our strategy was validated for the broad application to commonly used CE devices. Taken together, this assay will be useful for accurate analysis of multiple disease-associated CNVs in a clinical setting.     

A SNaPshot assay for genotyping 44 individual identification single nucleotide polymorphisms

Single nucleotide polymorphisms (SNPs), which have relatively low mutation rates and can be genotyped after PCR with shorter amplicons compared with short tandem repeats (STRs), are being considered as potentially useful markers in forensic DNA analysis. Those SNPs with high heterozygosity and low Fst (F-statistics) in human populations are described as individual identification SNPs, which perform the same function as STRs used in forensic routine work. In the present study, we developed a multiplex typing method for analyzing 44 selected individual identification SNPs simultaneously by using multiplex PCR reaction in association with fluorescent labeled single base extension (SBE) technique. PCR primers were designed and the lengths of the amplicons ranged from 69 to 125?bp. The population genetics data of 79 unrelated Chinese individuals for the 44 SNP loci were investigated and a series of experiments were performed to validate the characteristic of the SNP multiplex typing assay, such as sensitivity, species specificity and the performance in paternity testing and analysis of highly degraded samples. The results showed that the 44-SNPs multiplex typing assay could be applied in forensic routine work and provide supplementary data when STRs analysis was partial or failed.     

Multiplex PCR design strategy used for the simultaneous amplification of 10 Y chromosome short tandem repeat (STR) loci

The simultaneous amplification of multiple regions of a DNA template is routinely performed using the polymerase chain reaction (PCR) in a process termed multiplex PCR. A useful strategy involving the design, testing, and optimization of multiplex PCR primer mixtures will be presented. Other multiplex design protocols have focused on the testing and optimization of primers, or the use of chimeric primers. The design of primers, through the close examination of predicted DNA oligomer melting temperatures ( T(m)) and primer-dimer interactions, can reduce the amount of testing and optimization required to obtain a well-balanced set of amplicons. The testing and optimization of the multiplex PCR primer mixture constructed here revolves around varying the primer concentrations rather than testing multiple primer combinations. By solely adjusting primer concentrations, a well-balanced set of amplicons should result if the primers were designed properly. As a model system to illustrate this multiplex design protocol, a 10-loci multiplex (10plex) Y chromosome short tandem repeat (STR) assay is used.     

A multiplex SNP genotyping by allele‐specificspecific PCR based on stem‐loop and universal fluorescent primers of Chr1daxin mice

Single nucleotide polymorphisms (SNPs) are one of the most common markers in mammals. Rapid, accurate, and multiplex typing of SNPs is critical for subsequent biological and genetic research. In this study, we have developed a novel method for multiplex genotyping SNPs in mice. The method involves allele‐specific PCR amplification of genomic DNA with two stem‐loop primers accompanied by two different universal fluorescent primers. Blue and green fluorescent signals were conveniently detected on a DNA sequencer. We verified four SNPs of 65 mice based on the novel method, and it is well suited for multiplex genotyping as it requires only one reaction per sample in a single tube with multiplex PCR. The use of universal fluorescent primers greatly reduces the cost of designing different fluorescent probes for each SNP. Therefore, this method can be applied to many biological and genetic studies, such as multiple candidate gene testing, genome‐wide association study, pharmacogenetics, and medical diagnostics.     

食品中沙门菌和单增李斯特菌的多重PCR-芯片电泳快速检测

建立了食品中沙门菌和单增李斯特菌的多重PCR-芯片电泳快速检测方法。根据沙门菌和单增李斯特菌的特征基因合成2对特异性引物,优化聚合酶链反应(PCR)体系,采用芯片毛细管电泳快速检测食品中上述2种致病菌的多重PCR扩增产物。在优化的实验条件下,6 min内即可完成沙门菌和单增李斯特菌的同时检测;迁移时间的日内精密度为0.20%～1.7%,日间精密度3.7%～4.5%。     

Design of multiplex PCR primers using heuristic algorithm for sequential deletion applications

The sequential deletion method is commonly applied to locate the functional domain of a protein. Unfortunately, manually designing primers for multiplex polymerase chain reaction (PCR) is a labor-intensive task. In order to speed up the experimental procedure and to improve the efficiency of producing PCR products, this paper proposes a multiplex PCR primers (MPCRPs) designer to design multiple forward primers with a single 3′-UTR reverse primer for extracting various N-terminal truncated mutants to quickly locate the functional domain of a cDNA sequence. Several factors, including melting temperature, primer length, GC content, internal self-complement, cross-dimerization, terminal limitation, and specificity, are used as the criteria for designing primers. This study obtains a near-optimal solution of primer sets that can be placed in as few test tubes as possible for one multiplex PCR experiment.ResultsHomo sapiens ribosomal protein L5, Homo sapiens xylosyltransferase I, and Bacteriophage T4 gene product 11 were used as test examples to verify efficacy of the proposed algorithm. In addition, the designed primers of Homo sapiens ribosomal protein L5 cDNA were applied in multiplex PCR experiments. A total of 48 forward primers and one reverse primer were designed and used to duplicate N-terminal truncated mutants of different lengths from the protein. The primers were classified into eight tube groups (i.e., test tubes) held within the same temperature range (53–57 °C), and the validity of the PCR products were verified using polyacrylamide gel electrophoresis (PAGE) with the functional domain correctly located. A software implementation of the proposed algorithm useful in assisting the researcher to design primers for multiplex PCR experiments was developed and available upon request.     

The development of an 18-locus Y-STR system for forensic casework

The aim of the present work was to improve the discriminatory potential, and hence the probative value, of Y-STR-based testing by extending the set of Y chromosome STR loci available for forensic casework. In accordance with the requirements of a Y chromosome multiplex analytical system developed specifically for forensic casework use, we have sought to maximize the number of loci able to be co-amplified, ensure appropriate assay sensitivity (1–2 ng of input genomic DNA), balance inter-locus signals and minimize confounding female DNA artifacts. Two Y chromosome STR systems, multiplex I (MPI) and multiplex II (MPII), have been developed which permit the robust co-amplification of 18 Y-STRs. The loci include DYS19, DYS385(a) and (b), DYS388, DYS389I and II, DYS390, DYS391, DYS392, DYS393, DYS425, DYS434, DYS437, DYS438, DYS439, Y-GATA-C4, Y-GATA-A7.1 (DYS460) and Y-GATA-H4. The two multiplex systems are robust over a wide range of primer, magnesium, and DNA polymerase concentrations and perform well under a variety of cycling conditions. Complete male haplotypes can be obtained with as little as 100–250 pg of template DNA. Although a limited number of female DNA artifacts are observed in mixed stains in which the male DNA comprises 1/100 of the total, the male profile is easily discernible. Slightly modified versions of MPI and MPII demonstrate a significant reduction in female artifacts. Thus, it may not be necessary to employ a differential extraction strategy to obtain a male haplotype (or haplotypes in the case of multiple male donors) in cases of sexual assault. The potential utility of MPI and MPII for forensic casework is exemplified by their ability to dissect out the male haplotype in post-coital vaginal swabs and to determine the number of male donors in mixed semen stains.This study has emphasized the need for novel Y-STR multiplexes developed for forensic use to undergo a series of validation exercises that go beyond simply optimizing the PCR reaction conditions. Specifically, stringent performance checks on their efficacy need to be carried out using casework-type specimens in order to determine potential confounding effects from female DNA.     

Multiplex digital PCR: breaking the one target per color barrier of quantitative PCR

Quantitative polymerase chain reactions (qPCR) based on real-time PCR constitute a powerful and sensitive method for the analysis of nucleic acids. However, in qPCR, the ability to multiplex targets using differently colored fluorescent probes is typically limited to 4-fold by the spectral overlap of the fluorophores. Furthermore, multiplexing qPCR assays requires expensive instrumentation and most often lengthy assay development cycles. Digital PCR (dPCR), which is based on the amplification of single target DNA molecules in many separate reactions, is an attractive alternative to qPCR. Here we report a novel and easy method for multiplexing dPCR in picolitre droplets within emulsions-generated and read out in microfluidic devices-that takes advantage of both the very high numbers of reactions possible within emulsions (>10(6)) as well as the high likelihood that the amplification of only a single target DNA molecule will initiate within each droplet. By varying the concentration of different fluorogenic probes of the same color, it is possible to identify the different probes on the basis of fluorescence intensity. Adding multiple colors increases the number of possible reactions geometrically, rather than linearly as with qPCR. Accurate and precise copy numbers of up to sixteen per cell were measured using a model system. A 5-plex assay for spinal muscular atrophy was demonstrated with just two fluorophores to simultaneously measure the copy number of two genes (SMN1 and SMN2) and to genotype a single nucleotide polymorphism (c.815A>G, SMN1). Results of a pilot study with SMA patients are presented.     

Simultaneous Identification of Pork and Poultry Origins in Pet Foods by a Quick Multiplex Real-Time PCR Assay Using EvaGreen Florescence Dye

EvaGreen multiplex real-time polymerase chain reaction (EMRT-PCR) was designed for an assay that can join the advantages of multiplex PCR and real-time PCR to recognize animal genes more quickly in pet foods. EMRT-PCR based on melting temperatures discrimination by using EvaGreen fluorescence dye was developed for the analysis of pork and poultry in pet food. The method combines the use of poultry- and pork-specific primers that amplify small fragments of 12S rRNA and mitochondrial DNA genes. Appropriate mixtures of poultry and pork meat in reference samples were used to develop the assay. Gene yields of poultry and pork were represented in two melting peaks generated simultaneously at temperatures of 80.5 and 87.2 °C, respectively. Based upon the assay results, it has been concluded that EMRT-PCR assay might be an efficient tool for the verification of species origin in pet foods.     

Molecular Logic Gates for DNA Analysis: Detection of Rifampin Resistance in M. tuberculosis DNA

Elementary, Dr. Watson! A combination of YES and OR logic gates was applied to differentiate between DNA sequences of wild-type and rifampin-resistant (Rif(r) ) Mycobacterium tuberculosis (Mtb) in a multiplex real-time fluorescent assay.     

Improved adapter-ligation-mediated allele-specific amplification for multiplex genotyping by using software

Adapter-ligation-mediated allele-specific amplification (ALM-ASA) is a potential method for multiplex SNPs typing at an ultra low cost. Here, we describe a kind of software, which designs allele-specific primers for ALM-ASA assay on multiplex SNPs. DNA sequences containing SNPs of interest are submitted into the software which contains various endonucleases for options. Based on the SNP sequence information and the selected endonucleases, the software is capable of automatically generating sets of information needed to perform genotyping experiments. Each set contains a suitable endonuclease, qualified allele-specific primers with orientations and melting temperatures, sizes of allele-specific amplicons, and gel electropherograms simulated according to the sizes of the allele-specific amplicons and the mobility of DNA fragments in 2% agarose gel. Seven SNPs in the arylamines N-acetyltransferase 2 (NAT2) gene, five SNPs in the BRCA1 gene, five SNPs in the COMT gene, six SNPs in the CYP2E1 gene, five SNPs in the MPO gene, and six SNPs in the NRG1 gene were selected for evaluating the software. Without extra optimization, seven SNPs in the NAT2 gene were successfully genotyped for genomic DNA samples from 127 individuals by using the first set of allele-specific primers yielded by the software. Although several steps are used in the ALM-ASA assay, the whole genotyping process can be completed within 3 h by optimizing each step. Profiting from the software, the ALM-ASA assay is easy-to-perform, labor-saving, and accurate.     

Multiplex PCR with minisequencing as an effective high-throughput SNP typing method for formalin-fixed tissue

Extensive collections of formalin-fixed paraffin-embedded (FFPE) tissues exist that could be exploited for genetic analyses in order to provide important insights into the genetic basis of disease or host/pathogen cointeractions. We report here an evaluation of a 44 SNP multiplex genotyping method, multiplex PCR with minisequencing (MPMS), on 92 DNA extractions performed on six archival FFPE samples of variable DNA quality, which date between 9 and 25 years old. On the three extracts with highest quality, we found the assay efficiency to be near 100%. However, the efficiency of the lowest quality extracts varied significantly. In this study, we demonstrate that although direct measures of DNA concentration in the extracts provide no useful information with regard to subsequent MPMS success, the success of the assay can be determined to some degree a priori, through initial screening of the DNA quality using a simple quantitative real-time PCR (qPCR) assay for nuclear DNA, and/or an assay of the maximum PCR amplifiable size of nuclear DNA. MPMS promises to be of significant use in future genetic studies on FFPE material. It provides a streamlined approach for retrieving a large amount of genetic information using simple, single reactions and minute amounts of archival tissue/DNA. In the light of this evidence, we suggest that the systematic screening of FFPE collections may in the future provide valuable insights into the past.     

Development of an LC-MS/MS method for the analysis of serotonin and related compounds in urine and the identification of a potential biomarker for attention deficit hyperactivity/hyperkinetic disorder

Serotonin is a major neurotransmitter and affects various functions both in the brain and in the rest of the body. It has been demonstrated that altered serotinergic function is implicated in various psychiatric disorders including depression and schizophrenia. Serotonin has also been implicated along with dopamine in attention deficit–hyperkinetic disorder (AD-HKD). This study provides a versatile validated method for the analysis of serotonin, hydroxyindole acetic acid and dopamine in urine using LC-MS/MS. This method was then used to quantify these analytes in a test group of 17 children diagnosed with severe AD-HKD. This group was compared to a matched control group to investigate the possibility that one of these compounds may be a potential biomarker for this condition. The developed method provided good linear calibration curves for the multiplex assay of analytes in urine (0.05–3.27 nmol/L; R ² ≥ 0.9977). Acceptable inter-day repeatability was achieved for all analytes with RSD values (n = 9) ranging from 1.1% to 9.3% over a concentration range of 0.11–3.27 μmol/L in urine. Excellent limits of detection (LOD) and limits of quantitation (LOQ) were achieved with LODs of 8.8–18.2 nmol/L and the LOQs of 29.4–55.7 nmol/L for analytes in urine. Recoveries were in the ranges of 98–104%, 100–106% and 91–107% for serotonin, 5-HIAA and dopamine, respectively. An appropriate sample clean-up procedure for urine was developed to ensure efficient recovery and reproducibility on analysis. Evaluation of matrix effects was also carried out and the influence of ion suppression on analytical results reported. Confirmatory analysis was carried out on a linear trap quadrupole-Orbitrap mass spectrometer to obtain high mass accuracy data of the target analytes in the clinical samples.     

A new autosomal STR nineplex for canine identification and parentage testing

A single multiplex PCR assay capable of simultaneously amplifying nine canine‐specific autosomal STR markers (FH3210, FH3241, FH2004, FH2658, FH4012, REN214L11, FH2010, FH2361 and the newly described C38) was developed for individual identification and parentage testing in domestic dogs. In order to increase genotyping efficiency, amplicon sizes were optimized for a 90–350 bp range, with fluorescently labelled primers for use in Applied Biosystems, Inc., platforms. The performance of this new multiplex system was tested in 113 individuals from a case‐study population and 12 random dogs from mixed‐breed origin. Co‐dominant inheritance of STR alleles was investigated in 101 father, mother and son trios. Expected heterozygosity values vary between 0.5648 for REN214L11 and 0.9050 for C38. The high level of genetic diversity observed for most markers provides this multiplex with a very high discriminating power (matching probability=1.63/10¹⁰ and matching probability among siblings=4.9/10³). Allele sequences and a proposal for standardized nomenclature are also herein presented, aiming at implementing the use of this system in forensic DNA typing and population genetic studies. This approach resulted in an optimized and well‐characterized canine DNA genotyping system that is highly performing and straightforward to integrate and employ routinely. Although this STR multiplex was developed for use and tested in a case‐study population, the Portuguese breed Cão de Gado Transmontano, it proved to be useful for general identification purposes or parentage testing.     

Multiplex quantitative foodborne pathogen detection using high resolution CE-SSCP coupled stuffer-free multiplex ligation-dependent probe amplification

Sensitive multiplex detection methods for foodborne pathogens are important in controlling food safety, and detection of genetic markers is accepted to be one of the best tools for sensitive detection. Although CE technology offers great potential in terms of sensitive multiplex detection, the necessary amplification is confined to markers sharing common primers such as the 16S rRNA gene. For precise and sensitive detection, pathogen-specific genes are optimal markers. Although multiplex ligation-dependent probe amplification (MLPA) is appropriate for amplification of specific markers, the requirement for stuffers, to ensure length-dependent separation on CE, is a major obstacle in detection of foodborne pathogens. In the present study, we developed stuffer-free MLPA using high-resolution CE-SSCP to sensitively detect ten foodborne pathogens. The probe set for MLPA prior to CE-SSCP analysis was designed for species-specific detection. After careful optimization of each MLPA step, to ensure that CE-SSCP analysis was informative, we found that all ten pathogens could be reliably identified; the limits of detection were 0.5-5 pg of genomic DNA, and more than 100-fold increase could be quantitatively determined. Thus, MLPA-CE-SSCP is a sensitive and reliable technique for pathogen detection.     

Identification multiplex assay of 19 terrestrial mammal species present in New Zealand

An identification assay has been developed that allows accurate detection of 19 of the most common terrestrial mammals present in New Zealand (cow, red deer, goat, dog, horse, hedgehog, cat, tammar wallaby, mouse, weasel, ferret, stoat, sheep, rabbit, Pacific rat, Norway rat, ship rat, pig, and brushtail possum). This technique utilizes species‐specific primers that, combined in a multiplex PCR, target small fragments of the mitochondrial cytochrome b gene. Each species, except hedgehog, produces two distinctive species‐specific fragments, making the assay self‐confirmatory and enabling the identification of multiple species simultaneously in DNA mixtures. The multiplex assay detects as little as 100 copies of mitochondrial DNA, which makes it a very reliable tool for degraded and trace samples. Reliability, accuracy, reproducibility, and sensitivity tests to validate the technique were performed. The technique featured here enabled a prompt response in a predation specific event, but can also be useful for wildlife management and conservation, pest incursions detection, forensic, and industrial purposes in a very simple and cost‐effective manner.     

Capillary and microelectrophoretic separations of ligase detection reaction products produced from low-abundant point mutations in genomic DNA

Capillary gel electrophoresis (CGE) and polymer-based microelectrophoretic platforms were investigated to analyze low-abundant point mutations in certain gene fragments with high diagnostic value for colorectal cancers. The electrophoretic separations were carried out on single-stranded DNA (ssDNA) products generated from an allele-specific ligation assay (ligase detection reaction, LDR), which was used to screen for a single base mutation at codon 12 in the K-ras oncogene. The presence of the mutation generated a ssDNA fragment that was >40 base pairs (bp) in length, while the primers used for the ligation assay were <30 bp in length. Various separation matrices were investigated, with the success of the matrix assessed by its ability to resolve the ligation product from the large molar excess of unligated primers when the mutant allele was lower in copy number compared to the wild-type allele. Using CGE, LDR product models (44 and 51 bp) could be analyzed in a cross-linked polyacrylamide gel with a 1000-fold molar excess of LDR primers (25 bp) in approximately 45 min. However, when using linear polyacrylamide gels, these same fragments could not be detected due to significant electrokinetic biasing during injection. A poly(methylmethacrylate) (PMMA) microchip of 3.5 cm effective column length was used with a 4% linear polyacrylamide gel to analyze the products generated from an LDR. When the reaction contained a 100-fold molar excess of wild-type DNA compared to a G12.2D mutant allele, the 44 bp ligation product could be effectively resolved from unligated primers in under 120 s, nearly 17 times faster than the CGE format. In addition, sample cleanup was simplified using the microchip format by not requiring desalting of the LDR prior to loading.     

Expansion of a SNaPshot assay to a 55‐SNP multiplex: Assay enhancements,validation, and power in forensic science

A previously developed multiplex assay with 44 individual identification SNPs was expanded to a 55plex assay. Fifty‐four highly informative SNPs and an amelogenin sex marker were amplified in one PCR reaction and then detected with two SNaPshot reactions using CE. PCR primers for four loci, 28 single‐base extension primers, and the reaction conditions were altered to improve the robustness of the method. A detailed approach for allele calling was developed to guide analysis of the electropherogram. One hundred and eighty unrelated individuals and 100 father‐child‐mother trios of the Han population in Hebei, China were analyzed. No mutation was found in the SNP loci. The combined mean match probability and cumulative probability of exclusion were 1.327 × 10^?22 and 0.999932, respectively. Analysis of the 54 SNPs and 26 STRs (included in the AmpFLSTR Identifiler and Investigator HDplex kits) showed no significant linkage disequilibriums. Our research shows that the expanded SNP multiplex assay is an easily performed and valuable method to supplement STR analysis.     

Multiplexed identification of different fish species by detection of parvalbumin, a common fish allergen gene: a DNA application of multi-analyte profiling (xMAP™) technology

Fish are a common cause of allergic reactions associated with food consumption, with parvalbumin being the major allergenic protein. Some fish-hypersensitive patients tolerate some fish species while being allergic to others. Reliable detection methods for allergenic fish species in foods are necessary to ensure compliance with food allergen labeling guidelines to protect fish-allergic consumers. The objective of this project was to develop a multi-analyte detection method for the presence of fish in food. Therefore, conserved parvalbumin exon sequences were utilized for the design of universal PCR primers amplifying intron DNA and small regions of exons flanking the enclosed intron from even very distantly related fish species. An assay for the identification of eight fish species was developed using xMAP™ technology with probes targeting species-specific parvalbumin intron regions. Additionally, a universal fish probe was designed targeting a highly conserved exon region located between the intron and the reverse primer region. The universal fish assay showed no cross-reactivity with other species, such as beef, pork, lamb, chicken, turkey, and shrimp. Importantly, with the exception of one notable case with fish in the same subfamily, species-specific detection showed no cross-reactivity with other fish species. Limits of detection for these eight species were experimentally estimated to range from 0.01% to 0.04%, with potential to increase the detection sensitivity. This report introduces a newly developed method for the multiplex identification of at least eight allergenic fish species in food, which could conceivably be extended to detect up to 100 species simultaneously in one sample.