Determination of 4-methyl-cis-hexahydrophthalic anhydride in human blood by gas chromatography with electron-capture detection.

A gas-chromatographic technique using 63Ni electron-capture detection was applied to the determination of 4-methyl-cis-hexahydrophthalic anhydride in the blood of workers occupationally exposed to this airborne agent. The detection limit was 0.24 nmol ml-1. For occupational exposure to between 0.14 and 0.31 mg m-3 of the anhydride, the anhydride concentration in the workers' blood samples ranged from 3.4 to 10.7 nmol ml-1. The results are consistent with earlier findings in animal exposure experiments and support the view that the hydrolysis of the anhydride in a biological medium is not spontaneous, but might be an enzyme-catalysed reaction. The resulting dicarboxylic acid is excreted by the kidneys without further conjugation reactions.     

Determination of busulfan in human plasma by gas chromatography with electron-capture detection

A simple and highly sensitive gas chromatographic method has been developed for the determination of busulfan in human plasma. After extraction of plasma specimens (clinical or spiked) with ethyl acetate, busulfan and the internal standard [1,8-bis(methanesulfonyloxy)octane] were derivatized with 2,3,5,6-tetrafluorothiophenol to yield compounds monitored by a 63Ni electron-capture detector. Sample recoveries from extraction and derivatization were greater than 78 and 91%, respectively. The limit of quantitation was 0.01 microgram/ml (0.04 microM) in 1 ml of plasma with a linear relationship over the 0.01-1.0 micrograms/ml (0.04-4 microM) concentration range. The method has been applied to analyze the plasma versus time profile of busulfan in human subjects following administration of an oral dose of 4 mg/kg per day as a marrow ablative chemotherapy for bone marrow transplantation.     

Determination of pesticide residues in lettuce by gas chromatography with electron-capture detection

A sensitive, rapid, and simple multiresidue method for the simultaneous determination of 19 pesticides in different varieties of lettuce (Lactuca sativum) was developed. Lettuce samples were extracted by homogenization with acetone and partitioned into ethyl acetate-cyclohexane. Subsequent sample cleanup was not needed. Final determination was made by capillary gas chromatography (GC) with electron-capture detection (ECD). Confirmation analysis of pesticides was performed by GC coupled with mass spectrometry in the selected ion monitoring mode. The average recovery by the GC-ECD method obtained for these compounds varied from 66.4 to 119.2% with relative standard deviations < 7.7%. The GC-ECD method has good linearity, and the detection limit for the pesticides studied varied from 0.1 to 3.8 microg/kg. The proposed method was used to determine pesticide levels in different types of lettuce grown in soils from experimental fields.     

Determination of fluvalinate residues in beeswax by gas chromatography with electron-capture detection

A simple, rapid, and accurate method is described for the determination of residual fluvalinate in beeswax. The procedure consists of partitioning on a disposable column of diatomaceous earth (Extrelut), followed by chromatographic cleanup on a Florisil cartridge. The final extract is analyzed by capillary gas chromatography with electron-capture detection (GC-ECD). Briefly, wax samples were dissolved in n-hexane, and the solutions were sonicated and transferred to Extrelut columns. The fluvalinate was extracted with acetonitrile, and a portion of the extract was cleaned up on a Florisil cartridge. The fluvalinate was eluted with diethyl ether-n-hexane (1 + 1) and directly determined by GC-ECD. Recoveries from wax samples spiked at 5 fortification levels (100-1500 microg/kg) ranged from 77.4 to 87.3%, with coefficients of variation of 5.12-8.31%. The overall recovery of the method was 81.4 +/- 3.2%, and the limit of determination was 100 microg/kg.     

Determination of ultramicro amounts of selenium by gas chromatography with electron-capture detection

Formation of piazselenols by the reaction of Se(IV) with 1,2-diaminobenzene and its derivatives, followed by solvent extraction and gas chromatography with electron-capture detection, provides the most sensitive means of determining selenium. By suitable chemical manipulation, the method can be used for Se(-II), Se(O), Se(IV) and Se(VI). Applications to a wide variety of samples are reviewed.     

Determination of toxaphene enantiomers by comprehensive two-dimensional gas chromatography with electron-capture detection

Comprehensive two-dimensional gas chromatography with micro electron-capture detection (GC x GC-microECD) has been evaluated for the enantioseparation of five chiral toxaphenes typically found in real-life samples (Parlar 26, 32, 40, 44 and 50). From the two enantioselective beta-cyclodextrin-based columns evaluated as first dimension column, BGB-176SE and BGB-172, the latter provided the best results and was further combined with three non-enantioselective columns in the second dimension: HT-8, BPX-50 and Supelcowax-10. The combination BGB-172 x BPX-50 was finally selected because it provided a complete separation among all enantiomers. A satisfactory repeatability and reproducibility of the retention times in both the first and the second dimension were observed for all target compounds (RSDs below 0.8%, n = 4). Linear responses in the tested range of 10-200 pg/microl and limits of detection in the range of 2-6 pg/microl were obtained. The repeatability and reproducibility at a concentration of 100 pg/microl, evaluated as the RSDs calculated for the enantiomeric fraction (EF), was better than 11% (n = 4) in all instances. The feasibility of the method developed for real-life analyses was illustrated by the determination of the enantiomeric ratios and concentration levels of the test compounds in four commercial fish oil samples. These results were compared to those obtained by heart-cut multidimensional gas chromatography using the same enantioselective column.     

Determination of mefloquine by electron-capture gas chromatography after phosgene derivatization in biological samples and in capillary blood collected on filter paper

Mefloquine is determined in 100-microliter samples of whole blood, plasma and capillary blood collected on filter paper by gas chromatography with electron-capture detection after derivatization with phosgene. Sample preparation for whole blood and plasma involves a protein precipitation step that uses a combination of zinc and acetonitrile, followed by simultaneous extraction with methylene chloride and derivatization with phosgene at pH 9.50. Filter paper spots are immersed for 12-24 h in 0.1 M hydrochloric acid, followed by simultaneous extraction with methyl tert.-butyl ether and derivatization. After evaporation of the organic phase and reconstitution with ethyl acetate, 1 microliter of the extract is injected into a megabore capillary column. Because of the high sensitivity of the method, mefloquine concentrations down to 25 nmol/l (9.5 micrograms/l) are determined in 100-microliters samples with a relative standard deviation of 12% at the 25 nmol/l level. Excellent precision was obtained over the range of concentrations tested, 0.10-3 mumol/l (45-1100 micrograms/l), in both plasma and whole blood and from filter-paper-collected capillary blood. The day-to-day relative standard deviation in plasma at the therapeutic level (1-3 mumol/l) was 4.5% (n = 8).     

Determination of thermodynamic properties by supercritical fluid chromatography

This survey attempts to summarise thermodynamic applications of supercritical fluid chromatography (SFC) with an emphasis on the results published during the last 10 years. In addition to a review of thermodynamic measurements by SFC, it contains brief sections on instrumental considerations and on the sources of auxiliary information needed when processing the retention data.     

Determination of methyl- and ethylmercury in rat blood and tissue samples by capillary gas chromatography with electron-capture detection

A precise and accurate method has been developed for the determination of either methyl- or ethylmercury in the blood and tissue of rats using capillary gas chromatography with electron-capture detection. The biological sample was spiked with an internal standard (methyl- or ethylmercury chloride) and after treatment with sodium thiosulphate and cupric bromide the alkylmercurials were extracted into benzene as their bromide derivatives and analysed on an OV-275 glass capillary column. The sensitivity and selectivity of the method enabled determinations to be made on small volumes of blood and tissue homogenates. The method has been applied to a pharmacokinetic study in rats dosed orally with 8 mercury as methylmercury chloride or ethylmercury chloride.     

Determination of halogenated mono-alcohols and diols in water by gas chromatography with electron-capture detection

We have developed an analytical method for the detection of halogenated alcohols in water with particular focus on 3-chloro-1,2-propanediol and 3-bromo-1,2-propanediol. In this method the target analytes are extracted from water, derivatized with heptafluorobutyric anhydride, and then analyzed with gas chromatography with electron-capture detection. The effects of water, pH and seawater constituents on the method were investigated. Method detection limits for a 5 ml aqueous sample ranged from 0.14 microg l(-1) for 2-bromo-1,3-propanediol to 1.7 microg l(-1) for 1,3-dichloro-2-propanol (1,3DCP).     

Determination of bromhexine as its trifluoroacetyl derivative by gas-liquid chromatography with electron-capture detection

A specific gas-liquid chromatographic method with electron-capture detection is described for the determination of bromhexine at the nanogram level. Structurally analogous internal standards were synthesized and their suitability was investigated, based on their chromatographic properties on different stationary liquid phases. The electron-capture activity of the compounds is increased by trifluoroacetylation. Reaction conditions for this derivatization were studied. Calibration graphs in the range 0-57 ng (in a total of 100 microliters of reaction mixture) showed good linearity.     

Determination of fenpyroximate in apples by supercritical fluid extraction and packed capillary liquid chromatography with UV detection

A method using off-line supercritical fluid extraction (SFE) and micro liquid chromatography (μLC) with UV detection at 260 nm, was developed for selective determination of fenpyroximate in apple samples. The packed capillary liquid chromatography method utilises 20 μl injection volumes with on-column focusing. A 350×0.32 mm capillary column packed with Kromasil 100-C₁₈ of 5 μm particle size was used with a mobile phase of acetonitrile–10 mM ammonium acetate (85:15, v/v) at a flow of 5 μl/min. A two-step SFE procedure was used to extract fenpyroximate selectively in 2 g apple samples, with Hydromatrix (HMX) added as a water absorbent at a 1:1 (w:w) ratio. Fenpyroximate was extracted at 200 bar and 90°C for 15 min using carbon dioxide at a flow of 2 ml/min, and solvent trapping collection in 10 ml acetonitrile. The volume of the acetonitrile extract was reduced by evaporation and water was added to a final composition of acetonitrile–water (40:60, v/v). The resulting 2.0 ml solution was filtered using a 0.45 μm poly(vinylidene difluoride) syringe filter before μLC analysis. Validation of the method was accomplished with apple samples spiked with fenpyroximate, covering the range of 0.1 to 1.0 μg/kg. The within-day and between-day repeatabilities were in the range 4–18% relative standard deviation. Accuracy, measured as recovery, was found to be approximately 60%. Apple samples from a field treated with fenpyroximate were analysed. None of the samples contained fenpyroximate above the quantification level.     

Determination of a new blood glucose-lowering agent in biological fluids by capillary gas chromatography using electron-capture detection

A gas chromatographic method for the determination of 5-(4-chlorophenyl)-2-[(4-methylphenyl)sulphonyl]-4-pentynoic acid (I) in plasma (serum) and urine has been developed. After an extraction process, the cleaned-up organic extract was derivatized with diazomethane at ambient temperature. Results are evaluated from peak-height ratios with respect to the appropriate internal standard. The detection limit following extraction of a 1-ml plasma sample is about 20 ng/ml.     

Determination of mefloquine in blood, filter paper-absorbed blood and urine by 9-fluorenylmethyl chloroformate derivatization followed by liquid chromatography with fluorescence detection

We describe a method for determination of mefloquine (MQ) in 100-microliters samples of urine, whole blood, and capillary blood collected on filter paper; quantification is by liquid chromatography with fluorescence detection at 475 nm of the 9-fluorenylmethyleneoxycarbonyl derivative. Whole blood and urine samples were prepared by extraction of MQ and internal standard from aqueous base with methyl tert.-butyl ether (MTBE), separation and evaporation of the MTBE layer, and derivatization using a solution of 9-fluorenylmethyl chloroformate in acetonitrile. Filter paper spots were immersed for 16 h in 0.1 M hydrochloric acid, followed by extraction with MTBE from aqueous sodium carbonate. The separated and evaporated organic layer was treated with the derivatizing solution. An aliquot was injected onto a high-performance liquid chromatography system using a C18 reversed-phase column and acetonitrile-water (72:28) mobile phase for filter paper spot extracts as for whole blood and urine extracts. The method has a limit of determination in blood, blood spots, and urine of 50 ng/ml with 100 microliters sample size (coefficient of variation = 16%). Linearity and precision (within-day and between-day) for the method are good. The MQ derivative was isolated and characterized spectroscopically. Values for MQ concentrations in filter paper blood spots compared favorably with values found in corresponding whole blood samples analyzed by a published method.     

Peroxyoxalate chemiluminescence detection with packed column supercritical fluid chromatography

Summary A detection scheme based upon peroxyoxalate chemiluminescence, which utilizes two post-column pumps and two stages of depressurization is investigated. The chemiluminescent detection limit for perylene is 23 times lower than determined by fluorescence, and is in the attomole range. This detection technique is investigated for packed column supercritical fluid chromatography (SFC). Due to the interface design used and the chemical band narrowing effects of chemiluminescence, an apparent increase in efficiency is observed. The interface design affords a wide range of pressures to be used for a separation. During pressure programming the column effluent changes flow rate. Because of a back-pressure regulator, the reaction and detection take place at nearly constant pressure. Therefore pressure gradient work is possible without concern for post-column reagent solubility (which is a concern for high-performance liquid chromatography). The effects of the expanded CO₂ from the SFC on the chemiluminescence signal and background are studied. The post-column detection is optimized for pH, photomultiplier voltage, concentrations and flow rates of the peroxide and oxalate ester.