Thermal condensation of phthalimide with malonic acid

When phthalimide is reacted with malonic acid in the presence of zinc acetate, 1-hydroxy-1-methyl-1H-3-(1-oxoisoindolin-3-ylidenemethyl)isoindole, the zinc complex of 1-hydroxy-8,1322,27-diimino-1,615,20-dinitrilotetrabenzo[b,d,l,q]eicosin, and zinc tetrabenzoporphin are formed depending on the temperature. The compounds have been characterized by their electronic absorption spectra, IR and mass spectra, and also by their x-ray photoelectron spectra. A possible scheme for the synthesis of zinc tetrabenzoporphin has been proposed.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 480–484, April, 1988.     

Determination of organic substances by oxidation with permanganate : XIX. Analysis of mixtures of malonic and oxalic acids and of malonic and formic acids

A method for the analysis of mixtures of malonic and oxalic and malonic and formic acids has been developed. The method is based on stepwise oxidation with excess permanganate in alkaline [Eqs. (1) and (3)] and acid [Eq. (2)] media.     

Synthesis of 6-hetaryl-substituted azulenes and their reactions with 2,6-diphenylpyrylium perchlorate

A method for the synthesis of 4,6,8-trimethyl- and 4,8-dimethyl-6-(2-thienyl, 2-benzothiazolyl) azulenes from 2,6-dimethyl-4-(methyl, 2-thienyl, 2-benzothiazolyl)-pyrylium perchlorates and cyclopentadienyllithium is described. The possibility of direct pyrylation of azulenes with 2,6-diphenylpyrylium perchlorate is demonstrated. Azulenes with a pyrylium ring in the 1 position were synthesized, and their behavior with respect to ammonium acetate was investigated.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1045–1047, August, 1980.     

New high-yield,one-step synthesis of polyglycolide from haloacetic acids

In a new, one-step synthesis, polyglycolide was prepared by the reaction of bromo- or chloroacetic acid with triethylamine in a nitromethane solution. It was discolored, by iodoacetic acid possibly as a result of iodine formed by the decomposition of triethylammonium iodide. The structure of polyglycolide was characterized by hydrolysis, ¹H-NMR and IR spectra, and x-ray powder diffraction, which indicated partial crystallinity. A mechanism is proposed for the formation of polyglycolide. A lower limiting value of the number-average molecular weight of 10⁴ was determined by cryoscopy in 1,3-dinitrobenzene for polyglycolide prepared from bromoacetic acid; the measurement was inaccurate because of the low solubility of the polymer. No significant effect of solvent (acetone, ether, or chloroform) on yield or melting point was observed; a higher yield was obtained in nitromethane. The polymer obtained with tri-n-propylamine and bromoacetic acid had properties similar to that obtained with triethylamine. No polymer was obtained with N,N-dimethylaniline and bromoacetic acid or with triethylamine and bromoacetic acid in aqueous solution.     

Continuous, on-line monitoring of haloacetic acids via membrane extraction

Haloacetic acids are an important class of disinfection byproducts that are being regulated. In this paper we report novel instrumentation for continuous monitoring of the nine haloacetic acids. Hollow fiber liquid-liquid membrane extraction (LLME) and supported liquid membrane extraction (SLME) followed by on-line HPLC-UV detection were studied. With continuous LLME, seven halo-acetic acids could be analyzed and enrichment factor (EF) was around 50. All the nine acids could be extracted and quantified by continuous SLME. Experiments with laboratory standards demonstrated that EF and extraction efficiency could be as high as 500 and 54%, respectively. Relative standard deviations based on seven replicates were between 3.3 and 10.3%, and the MDLs were at sub-ppb levels.     

Determination of haloacetic acids in water by ion chromatography--method development.

The microextraction/ion chromatographic (IC) method developed in this study involves extraction of 9 haloacetic acids (HAAs) from aqueous samples (acidified with sulfuric acid to a pH of < 0.5 and amended with copper sulfate pentahydrate and sodium sulfate) with methyl tert-butyl ether (MTBE), back extraction into reagent water, and analysis by IC with conductivity detection. The separation column consists of an Ion Pac AG-11 (2 mm id x 50 mm length) guard column and an Ion Pac AS-11 (2 mm id x 250 mm length) analytical column, and the concentration column is a 4 mm id x 35 mm length Dionex TAC-LP column. Use of the 2 mm id Dionex AS-11 column improved detection limits especially for trichloracetic acid (TCAA), bromodichloroacetic acid (BDCAA), dibromochloroacetic acid (DBCAA), and tribromoacetic acid (TBAA). The peak interfering with BCAA elutes at the same retention time as nitrate; however, we have not confirmed the presence of nitrate. Stability studies indicate that HAAs are stable in water for at least 8 days when preserved with ammonium chloride at 100 mg/L and stored at 4 degrees C in the dark. At day 30, recoveries were still high (e.g., 92.1-106%) for dichloroacetic acid (DCAA), BCAA, dibromoacetic acid (DBAA), trichloroacetic acid (TCAA), BDCAA, and DBCAA. However, recoveries of monochloroacetic acid (MCAA), monobromoacetic acid (MBAA), and TBAA were only 54.6, 56.8, and 66.8%, respectively. Stability studies of HAAs in H2SO4-saturated MTBE indicate that all compounds except TBAA are stable for 48 h when stored at 4 degrees C in the dark. TBAA recoveries dropped to 47.1% after 6 h of storage and no TBAA was detected after 48 h of storage. The method described here is only preliminary and was tested in only one laboratory. Additional research is needed to improve method performance.     

Preconcentration and separation of haloacetic acids by ion chromatography

A comparative study was made of the chromatographic behaviour of five haloacetic acids (mono-, dibromoacetic and mono-, di-, trichloroacetic acids). The techniques investigated included reversed-phase ion interaction chromatography with UV detection, suppressed and non-suppressed anion-exchange chromatography. The systems are discussed studying the retention as a function of the mobile phase parameters and the stationary phases used (LiChrospher 100 RP-18, IonPac AS9, AS10 and AS11). A preconcentration step, performed on different substrates, namely LiChrolut-EN and activated vegetal carbon, has been optimized in order to reduce the method detection limits. Results obtained for drinking water samples are shown.     

Synthesis of bicyclic diesters of malonic and succinic acids

Monoesters of malonic and succinic acids have been prepared in high yields by the BF₃·OEt₂-catalyzed addition of the acids to bicyclo[2.2.1]hept-2-ene. The synthesized monoesters were introduced in the reaction of esterification with saturated monoatomic alcohols С₂–С₇ in the presence of the KU-2-8 catalyst in the H-form, and the corresponding mixed diesters of dicarboxylic acids were obtained in high yields.     

Cerate oxidimetry : Oxidation of formic,glycolic, malic,malonic and tartaric acids

1. Contrary to the observations of earlier workers, it has been shown that formic acid can be quantitatively oxidixed by ceric sulphate in the presence of concentrated sulphuric acid. 2. Tartaric, malonic, malic and glycolic acids can also be oxidized completely to carbon dioxide and water by the following general procedure : to a known amount of the organic acid is added ceric sulphate (excess) solution in dilute sulphuric acid and the mixed solution refluxed for ten to fifteen minutes. Concentrated sulphuric acid (double the volume of the reaction mixture) is then added taking care that formic acid is not lost during the addition, and the mixture again refluxed for 45 to 50 minutes. The excess ceric sulphate is determined by titrating against ferrous ammonium sulphate. 3. The complete oxidation of the above acids provides satisfactory methods for their quantitative estimation.     

Optimizing the determination of haloacetic acids in drinking waters

Three methods are currently approved by the US Environmental Protection Agency for the compliance monitoring of haloacetic acids in drinking waters. Each derivatizes the acids to their corresponding esters using either acidic methanol or diazomethane. This study was undertaken to characterize the extent of methylation of these analytes by these methods, and to fully optimize methylation chemistries to improve analytical sensitivity, precision and accuracy. The approved methods were shown to have little to no esterification efficiencies for the brominated trihaloacetic acids (HAA3). Methylation with acidic methanol was determined to be more efficient and rugged than methylation with diazomethane. A new higher boiling solvent, tertiary-amyl methyl ether, is reported which has significantly improved methylation efficiencies for HAA3. Additional modifications to the method have been made that improve method ruggedness. The revised method, EPA Method 552.3, outperforms the currently approved methods, especially for HAA3.     

Mesoporous materials for the retention and separation of haloacetic acids

Summary Mesoporous silica-based materials have been synthesized and studied for applications in the environmental field. Haloacetic acids have been chosen as test compounds since they are byproducts of disinfection processes of water for human consumption. For this purpose mesoporous materials have been synthesized in acid, basic or neutral conditions. The effect of composition and synthesis conditions of mesoporous materials on their retention properties have been studied. The retention mechanism has also been elucidated in term of electrostatic interactions and as a function of the residual surfactant content in the materials. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Mechanism of the protonation of azulenes in aqueous solutions of acids

In aqueous solutions of strong acids (H₂SO₄, H₃PO₄, and HCl) containing azulene, the fast reversible protonation of azulene is accompanied by the slow formation of a disperse dark violet dye insoluble in acids, alcohol, and heptane. On the basis of the kinetic specifics of this reaction and the nonlinear (nearly reciprocal quadratic) dependence of the concentrations ratio of their cationic and neutral forms on the Hammett acidity function known for azulene and 14 of its derivatives, azulene is shown not to be a Hammett base. A mechanism for the reversible reactions of the azulenium cation is proposed that considers supramolecular dimers to be the basic state of azulene and its derivatives. The scheme includes reactions of the unstable intermediate π complexes formed from the dimers and hydrated hydrogen cations; the complexes quickly dissociate in the opposite direction and react with the hydrated protons to yield azulenium cations and unstable molecules that induce polymerization of the dimers.     

Thermal behaviour of malonic acid,sodium malonate and its compounds with some bivalent transition metal ions

Characterization, thermal stability and thermal decomposition of transition metal malonates, MCH₂C₂O₄·nH₂O (M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II)), as well as, the thermal behaviour of malonic acid (C₃H₄O₄) and its sodium salt (Na₂CH₂C₂O₄·H₂O) were investigated employing simultaneous thermogravimetry and differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), infrared spectroscopy, TG-FTIR system, elemental analysis and complexometry. The dehydration, as well as, the thermal decomposition of the anhydrous compounds occurs in a single step. For the sodium malonate the final residue up to 700 °C is sodium carbonate, while the transition metal malonates the final residue up to 335 °C (Mn), 400 °C (Fe), 340 °C (Co), 350 °C (Ni), 520 °C (Cu) and 450 °C (Zn) is Mn₃O₄, Fe₂O₃, Co₃O₄, NiO, CuO and ZnO, respectively. The results also provided information concerning the ligand's denticity, thermal behaviour and identification of some gaseous products evolved during the thermal decomposition of these compounds.     

New specific spot tests for barbituric and thiobarbituric acids, malonic acid and urea

Barbituric and thiobarbituric acids may be detected with pyridyl pyridinium dichloride, giving, respectively, a reddish-blue and blue colour. The limit of identification is 0.5 μg in each case. Malonic acid can be converted to barbituric acid by heating with urea and is then detected in a similar manner. The limit of identification is 50 μg of malonic acid. Urea may be detected with a limit of identification of 200 μg by reversing the test for malonic acid. All four tests are specific.