Charateristics of a helical axial flow CO_2 laser

A novel CO_2 laser tube which forms a helical axial gas flow is designed. The influences of such a flow on the output laser beam is discussed.     

Injection mode-locking of a 200 joule TEA-CO2 laser

A 200 joule TEA-CO₂ laser has been mode-locked by injection of a nanosecond pulse into a regenerative amplifier operating in an above threshold regime. 25 gigawatt pulses have been obtained.     

Charateristics of a helical axial flow CO2laser

A novel CO2 laser tube which forms a helical axial gas flow is designed. The influences of such a flow on the output laser beam is discussed.     

Theory of coupled mode oscillation in a laser with axial magnetic field

The nonlinear laser theory without noise is applied to calculate amplitudes, frequencies and beat frequencies of two circularly polarized modes in a laser with axial magnetic field. The resonator is allowed to have different damping constants for waves polarized inx- andy-direction. For small beat frequencies frequency locking occurs, and the modes combine to a linearly or elliptically polarized mode. The plane of polarization rotates with increasing magnetic field up to ± π/4.     

Simplification of the helical TE N2 laser

We report the observation that the helical TE N₂ laser can effectively be simplified by giving up the use of decoupling elements as well as by abolishing the segmentation of the electrode structure. Although, as a consequence of this simplification, the operating pressure range was slightly decreased, the output power could be improved by roughly 30%, a result which is attributed to the new electrode geometry exhibiting lower inductance and lower damping losses.     

Self-field effects on electron dynamics in a three-dimensional helical wiggler free-electron laser with axial magnetic field

An analytic linear theory of the electron dynamics in a three-dimensional helical wiggler free electron laser (FEL) with axial magnetic field is presented. Orbits are obtained by perturbing the steady state-trajectories in order to determine the characteristic frequencies Ω_± of the FEL. The effect of the self-fields on electron dynamics is studied and modified steady-state orbits and their stabilities have been analysed considering variation of electron energy and density. Among the features encountered is that in both group-I and group-II, one of the characteristic frequencies may have either signs affecting then the stability of the motion, while in group-II operation a repulsion of the frequencies at a pseudocrossing leads to highly perturbed trajectories when the wiggler frequency is approximately half the cyclotron frequency. Self-fields effects can significantly impair the stability of the electron orbits. For group-I orbits, they are more important for higher wiggler frequencies and lower beam energies. For group-II orbits, they remain less important for higher wiggler frequencies and lower beam energies before reaching the inversion zone, then they behave as for group-I orbits. It should be remarked that self-fields shift the inversion zone towards higher cyclotron frequencies the thing that is obtained by either decreasing the wiggler frequency or increasing the beam energy. It is shown that the axial velocity-induced self-magnetic field has a diamagnetic effect for both groups orbits, while the wiggler-induced self-magnetic field has a diamagnetic effect for group-I orbits and a paramagnetic effect for group-II orbits. The paramagnetic and diamagnetic effects are more important for higher beam energies and densities.     

Chirofibers with helical windings - An analytical investigation

In this communication, the propagation characteristic of a chiral fiber having helical windings at the core-cladding boundary is analyzed in respect of the relative distribution of power over the sustained modes. The core and the cladding sections of the chirofiber are assumed to have different chirality admittance values while the helical winding pitch angle is considered to attain two particular values -0^° and 90°. It is observed that the introduction of helical structure leaves a dominant effect on the relative power distribution of the chiral fiber as the variations of the confinement factor with the allowed values of the propagation constants corresponding to different azimuthal modes exhibit much difference in nature for different values of the angle of pitch. It is noticed that the power confinement in the core is much higher when the pitch angle of the helix is effectively introduced by keeping the windings perpendicular to the propagation direction. Further, the property of mode degeneracy in chirofibers is also observed, which is reported to be of much significance when the helical structure remains parallel to the direction of propagation. A more profound mode degeneration characteristic is found for the chiral fiber with larger core dimension.     

脉冲强激光破坏Hg0.8Cd0.2Te晶片材料的机理分析

 利用光学金相显微镜对TEA-CO₂脉冲强激光辐照的Hg_0.8Cd_0.2Te晶片表面进行了观察。在单脉冲能量为37.5 J，能量密度为937.5 J/cm²的强激光辐照下，晶片表面呈现出熔融迹象和大量的微裂纹，微裂纹密度从激光辐照区中心向外逐渐减少，裂纹沿晶体的(111)面扩展。随着脉冲连续作用次数的增加，晶片表面熔融更加剧烈，裂纹数目、裂纹深度和宽度都有所增加。分析认为：HgCdTe晶片的破坏与激光辐照能量、脉冲连续作用次数、激光场强分布、激光热应力、激光支持的燃烧波和物质的蒸发波等冲击波有关。     

Electron acceleration in the inverse free electron laser with a helical wiggler by axial magnetic field and ion-channel guiding

Electron acceleration in the inverse free electron laser (IFEL) with a helical wiggler in the presence of ion-channel guiding and axial magnetic field is investigated in this article. The effects of tapering wiggler amplitude and axial magnetic field are calculated for the electron acceleration. In free electron lasers, electron beams lose energy through radiation while in IFEL electron beams gain energy from the laser. The equation of electron motion and the equation of energy exchange between a single electron and electromagnetic waves are derived and then solved numerically using the fourth order Runge-Kutta method. The tapering effects of a wiggler magnetic field on electron acceleration are investigated and the results show that the electron acceleration increases in the case of a tapered wiggler magnetic field with a proper taper constant.     

脉冲强激光破坏Hg0.8Cd0.2Te晶片材料的机理分析

利用光学金相显微镜对TEA-CO2脉冲强激光辐照的Hg0.8Cd0.2Te晶片表面进行了观察。在单脉冲能量为37.5 J,能量密度为937.5 J/cm2的强激光辐照下,晶片表面呈现出熔融迹象和大量的微裂纹,微裂纹密度从激光辐照区中心向外逐渐减少,裂纹沿晶体的(111)面扩展。随着脉冲连续作用次数的增加,晶片表面熔融更加剧烈,裂纹数目、裂纹深度和宽度都有所增加。分析认为：HgCdTe晶片的破坏与激光辐照能量、脉冲连续作用次数、激光场强分布、激光热应力、激光支持的燃烧波和物质的蒸发波等冲击波有关。     

Electron-microscopy investigations of the damage of aluminium mirrors as a result of repeated powerful microsecond pulsed TEA-CO2 laser irradiation in air

Progressive damage of aluminium mirrors subjected to microsecond pulsed TEA-CO₂ laser irradiation in air, at incident intensity levels lower than the thresholds for melting induction and air breakdown ignition, was evidenced by electron microscopy investigations. A simple model was developed accounting for the results of our experimental studies.     

An investigation of the spectral content of a mode-locked pulsed CO2 laser

The frequency width of a pulse train in a pulsed mode-locked CO₂ laser has been accurately measured by means of a Fabry-Perot interferometer. We succeeded in resolving the longitudinal mode structure. The results are in excellent agreement with the results of previous measurements of the line width under lasing conditions.     

Curvature-induced quantum behaviour on a helical nanotube

We investigate the effect of curvature on the behaviour of a quantum particle bound to move on a surface shaped as a helical tube. We derive and discuss the governing Schrödinger equation and the corresponding quantum effective potential which is periodic and points to the helical configuration as more energetically favorable as compared to the straight tube. The exhibited periodicity also leads to energy band structure of pure geometrical origin.     

An investigation of the laser cutting process with the aid of a plane polarized CO2 laser beam

A plane polarized power beam was used to investigate the reactive gas-assisted laser cutting process. This paper gives further experimental support for the theory of the existence of two different regimes in the oxygen-assisted cutting of steels and explains the dependence of the process on Fe-O₂ exothermic reactions.     

Air-breathing mode laser propulsion with a long-pulse TE CO_2 laser

Air-breathing mode laser propulsion experiment with a long-pulse transversely excited(TE) CO2 laser is carried out,and its ignition problem is solved with the ignition needle of lightcraft.Owing to the ignition needle,an order of magnitude reduction in the ignition threshold is demonstrated.The result is compared with previous study.The momentum coupling coefficient is also measured in the experiment and its dependence upon laser pulse energy(6-14 J) and pulse width(20,32,and 40μs) is discussed.     

Air-breathing mode a long-pulse laser propulsion with TE CO2 laser

Air-breathing mode laser propulsion experiment with a long-pulse transversely excited （TE） CO2 laser is carried out, and its ignition problem is solved with the ignition needle of lightcraft. Owing to the ignition needle, an order of magnitude reduction in the ignition threshold is demonstrated. The result is compared with previous study. The momentum coupling coefficient is also measured in the experiment and its dependence upon laser pulse energy （6 14 J） and pulse width （20, 32, and 40 μs） is discussed.     

Experimental investigation of a compact relativistic magnetron with axial TE11 mode radiation

As one of the relativistic electron tubes having compact configuration and high efficient output, the relativistic magnetron with direct axial radiation is very attractive in pulsed power and high power microwave fields for industrial and military applications. In this paper, the experimental investigation of a relativistic magnetron with axial TE11 mode radiation is reported. Under a total length of - 0.3 m, volume of - 0.014 m3, working at an applied voltage of 508 kV and a magnetic field of - 0.31 T, the relativistic magnetron radiates a microwave of 540 MW with the TE11 mode at 2.35 GHz in the axial direction. The power conversion efficiency is 15.0%. After a lot of shots, the detected amplitudes of microwaves are nearly the same. The fluctuations of wave amplitudes are less than 0.3 dB.