Signal enhancement for gene detection based on a redox reaction of [Fe(CN)(6)](4-) mediated by ferrocene at the terminal of a peptide nucleic acid as a probe with hybridization-amenable conformational flexibility

Electrochemically enhanced DNA detection was demonstrated by utilizing the couple of a synthesized ferrocene-terminated peptide nucleic acid (PNA) with a cysteine anchor and a sacrificial electron donor [Fe(CN)(6)](4-). DNA detection sensors were prepared by modifying a gold electrode surface with a mixed monolayer of the probe PNA and 11-hydroxy-1-undecanethiol (11-HUT), protecting [Fe(CN)(6)](4-) from any unexpected redox reaction. Before hybridization, the terminal ferrocene moiety of the probe was subject to a redox reaction due to the flexible probe structure and, in the presence of [Fe(CN)(6)](4-), the observed current was amplified based on regeneration of the ferrocene moiety. Hybridization decreased the redox current of the ferrocene. This occurred because hybridization rigidified the probe structure: the ferrocene moiety was then removed from the electrode surface, and the redox reaction of [Fe(CN)(6)](4-) was again prevented. The change in the anodic current before and after hybridization was enhanced 1.75-fold by using the electron donor [Fe(CN)(6)](4-). Sequence-specific detection of the complementary target DNA was also demonstrated.     

Redox cycling with facing interdigitated array electrodes as a method for selective detection of redox species

A pair of interdigitated ultramicroelectrodes (UMEs) is used to electrochemically detect a weak reductor (dopamine) in the presence of a stronger one (K(4)[Fe(CN)(6)]). In the mixture of both reductors, one of the two interdigitated electrodes (the generator electrode) is used to oxidize both species at 700 mV vs. Ag/AgCl, followed by subsequent (selective) reduction of the oxidized dopamine at 400 mV. A regenerated dopamine molecule can thus be oxidized several times (redox cycling) and enable selective detection even in the presence of the stronger reductor. In order to obtain high redox cycling efficiency, we designed and realized platinum electrodes with widths of 2 and 4 microm and spacing of 2 microm, which gave redox cycling efficiencies of 9 and 4 respectively. Using this electrode design, a dopamine/K(4)[Fe(CN)(6)] selectivity of 2 could be obtained.     

Redox reactions of ferricyanide ions in layer-by-layer deposited polysaccharide films: a significant effect of the type of polycation in the films

Redox reactions of ferricyanide ions, [Fe(CN)6]3-, in polysaccharide thin films that were prepared by layer-by-layer (LbL) deposition on the surface of a gold electrode were studied electrochemically by cyclic voltammetry. LbL films composed of alginic acid (AGA) and carboxymethylcellulose (CMC) were successfully prepared using poly(ethyleneimine) (PEI) and poly(diallyldimethylammonium chloride) (PDDA) as the cationic counterparts in the electrostatic LbL deposition. The deposition behavior of the PEI-based films significantly depended on the pH of the solutions from which the LbL films were deposited, while the effects of pH were negligibly small for the PDDA-based films due to the pH-independent positive charges on the PDDA chains. The cyclic voltammograms (CVs) of [Fe(CN)6]3- ions on the LbL film-coated electrodes revealed that all the LbL films tested are permeable to [Fe(CN)6]3- ions and that the redox reactions of [Fe(CN)6]3- ions proceed smoothly in the LbL polysaccharide films. It was found that [Fe(CN)6]3- ions are concentrated in the films from the bulk solution, depending on the pH of the medium and on the type of polycations in the film. The PEI-based films concentrated [Fe(CN)6]3- ions more effectively in an acidic solution than in neutral and basic media, while the pH effect was not observed for the PDDA-based films. In addition, we found that the [Fe(CN)6]3- ions are confined in the LbL films due to a strong binding of the ions to the positively charged sites arising from the protonated amino groups in the films. The confined [Fe(CN)6]3- ions exhibited redox reactions in the films, with the redox potentials being shifted to the positive or negative direction in the PEI- or PDDA-based film, respectively, as compared to the redox potential of diffusing [Fe(CN)6]3- ions. Thus, significant effects of the type of polycation in the LbL films on the redox reactions of [Fe(CN)6]3- ions were observed.     

Layer-by-layer assembly and electrochemical study of a 4-aminothiophenol and ytterbium(III) trifluoromethanesulfonate hydrate film on a gold electrode

We report on the layer-by-layer assembly and electrochemical properties of 4-aminothiophenol (P-ATP) and ytterbium(III) trifluoromethanesulfonate hydrate (Yb(OTf)(3)) film supported on a gold surface. The fabricated film was characterised electrochemically using redox couples Fe(CN)(6)(3-/4-), complemented with imaging using atomic force microscopy (AFM). The electrocatalytic activity of the prepared electrodes was studied using cyclic and differential pulse voltammetries. Electrochemical measurements show that the P-ATP/Yb(OTf)(3) modified electrode has superb activity towards hydroquinone (HQ) oxidation and that there is a significant improvement in the electrode stability and reproducibility due to the covalent and coordination reactions.     

玻碳电极上六氰亚铁酸钯膜的现场FTIR光谱电化学研究

本文报道六氰亚铁酸钯膜修饰电极在ＨＣｌ,ＫＣｌ和ＮａＣｌ溶液中的现场反射ＦＴＩＲ光谱电化学研究,结果表明该修饰膜具有内外两层结构,分别为Ｐｄ２Ｆｅ（ＣＮ）６和Ｍ２ＰｄＦｅ（ＣＮ）６,其中Ｍ为支持电解质一价阳离子．在１ｍｏｌ／ＬＮａＣｌ中,内层的氧化电位Ｅｍ＝０．８７Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ）,外层为０．７７Ｖ．在１ｍｏｌ／ＬＨＣｌ或ＫＣｌ中两层的氧化还原波重叠为一个大ＣＶ波峰而难以分辨,然而现场ＦＴＩＲ光谱电化学清晰地分辨出这两种结构在所有３种溶液中ＣＮ的不同振动频率,发现Ｈ＋离子是最佳的支持电解质,能使这两种结构同时发生氧化反应     

Immobilization of aryl and alkynyl groups onto glassy carbon surfaces by electrochemical reduction of iodonium salts

A new versatile method has been developed for the electrochemically assisted grafting of carbon materials. The approach is based on the reduction of iodonium salts and allows the immobilization not only of aryl groups, such as phenyl or nitrophenyl, but also of alkynyl groups under mild conditions. In particular, the immobilization of alkynyl groups is important because such grafting cannot be accomplished using any other known reductive procedure. The electrochemical properties of the grafted surfaces with estimated coverages of (4-6) x 10(-)(10) mol cm(-)(2) are investigated against the ferrocene and Fe(CN)(6)(3)(-) solution probes. The analysis of the surfaces is carried out by means of cyclic voltammetry and X-ray photoelectron spectroscopy.     

Properties of mixed alkanethiol-dendrimer layers and their applications in biosensing

We studied the properties of mixed alkanethiol-dendrimer layers on a gold support and their application in biosensing. We showed that properties of glucose sensor can be modified using a different ratio of 1-hexadecanethiol (HDT) and poly(amidoamine) dendrimer of first generation (G1). The cyclic voltammetry in the presence of the redox couple, Fe(CN)(6)(3-)/Fe(CN)(6)(4-), was used for estimating how effectively the layer blocks the redox probe's access to the electrode surface. A scanning electrochemical microscope (SECM) was used to image the resulting distribution of the organic compounds. We found that with increasing content of dendrimers, the integrity of the layers was improved.     

The Effect of Ionic Liquid Covalent Bonding to Sol‐Gel Processed Film on Ion Accumulation and Transfer

Accumulation of electroactive anions into a silicate film with covalently bonded room temperature ionic liquid film deposited on an indium tin oxide electrode was studied and compared with an electrode modified with an unconfined room temperature ionic liquid. A thin film containing imidazolium cationic groups was obtained by sol‐gel processing of the ionic liquid precursor 1‐methyl‐3‐(3‐trimethoxysilylpropyl)imidazolium bis(trifluoromethylsulfonyl)imide together with tetramethylorthosilicate on the electrode surface. Profilometry shows that the obtained film is not smooth and its approximate thickness is above 1 μm. It is to some extent permeable for a neutral redox probe – 1,1′‐ferrocene dimethanol. However, it acts as a sponge for electroactive ions like Fe(CN)₆^3?, Fe(CN)₆^4? and IrCl₆^3?. This effect can be traced by cyclic voltammetry down to a concentration equal to 10^?7 mol dm^?3. Some accumulation of the redox active ions also occurs at the electrode modified with the ionic liquid precursor, but the voltammetric signal is significantly smaller compare with the bare electrode. The electrochemical oxidation of the redox liquid t‐butyloferrocene deposited on silicate confined ionic liquid film is followed by the expulsion of the electrogenerated cation into an aqueous solution. On the other hand, the voltammetry obtained with the electrode modified with t‐butyloferrocene solution in the ionic liquid precursor exhibits anion sensitive voltammetry. This is explained by anion insertion into the unconfined ionic liquid deposit following t‐butylferricinium cation formation.     

Redox properties of the ferricyanide ion on electrodes coated with layer-by-layer thin films composed of polysaccharide and poly(allylamine)

Polyelectrolyte multilayer thin films were prepared by an alternate deposition of poly(allylamine hydrochloride) (PAH) and anionic polysaccharides {carboxymethylcellulose (CMC) and alginic acid (AGA)} on the surface of a gold (Au) disk electrode, and the binding of ferricyanide [Fe(CN)(6)](3)(-) and hexaammine ruthenium ions [Ru(NH(3))(6)](3+) to the films was evaluated. Poly(acrylic acid) (PAA) was also employed as a reference polyanion bearing carboxylate side chains. A quartz-crystal microbalance study showed that PAH-CMC and PAH-AGA multilayer films grow exponentially as the number of depositions increases. The thicknesses of five bilayers of (PAH-CMC)(5) and (PAH-AGA)(5) films were estimated to be 150 +/- 20 and 90 +/- 15 nm, respectively, in the dry state. The PAH/polysaccharide multilayer film-coated Au electrodes exhibited a redox response to the [Fe(CN)(6)](3)(-) ion dissolved in solution, irrespective of the sign of the surface charge of the film, suggesting the high permeability of the films to the [Fe(CN)(6)](3)(-) ion. In contrast, the PAH-PAA film-coated Au electrodes exhibited a redox response only when the outermost surface of the film was covered with a positively charged PAH layer. However, the permeation of the [Ru(NH(3))(6)](3+) cation was severely suppressed for all of the multilayer films. It was possible to confine the [Fe(CN)(6)](3)(-) ion in the films by immersing the film-coated electrodes in a 1 mM [Fe(CN)(6)](3)(-) solution for 15 min. Thus, the [Fe(CN)(6)](3)(-)-confined electrodes exhibited a cyclic voltammetric response in the [Fe(CN)(6)](3)(-) ion-free buffer solution. The loading of the [Fe(CN)(6)](3)(-) ion in the films was higher when the surface charge of the film was positive and increased with increasing film thickness. It was also found that the [Fe(CN)(6)](3)(-) ion confined in the films serves as an electrocatalyst that oxidizes ascorbic acid in solution.     

Electrosynthesis of polythiophene nanowires via mesoporous silica thin film templates

Early electrosynthesized polythiophene nanowires were prepared employing a mesoporous silica template, which was also electrochemically produced. A cathodic potential step was applied to a fluorine doped tin oxide conducting glass electrode in a cationic surfactant and silicate reagent medium to deposit highly ordered mesoporous silica films. To evaluate the pores order and, consequently, optimal deposition potential, the electrochemical response of the electrodes was studied using ferrocene as redox probe. The modified electrodes were used to accomplish polythiophene electrodeposits employing 0.6 mM thiophene and 0.1 M tetrabutylammonium hexafluorophosphate in anhydrous CH₃CN as working solution. Transmission electron microscope images of the deposits revealed the presence of polythiophene nanowires of about 6 nm in diameter arranged normal to the electrode surface. The unprecedented small size and arrangement of the obtained nanowires place this work as the first study that successfully accomplished the formation of nanoscale electrochemically synthesized conducting polymer nanowires.     

Perfluoro anion-exchange polymeric films on glassy carbon electrodes

Solutions of the perfluoro anion-exchange membrane TosHex® in a solvent mixture composed of methanol + isopropanol + water (1:1:1) were prepared and applied in coating glassy carbon electrodes. The evaporated films were used to accumulate the Fe(CN) ₆ redox couple on the electrode surface. The magnitude of the electrochemical response of the loaded films is comparable with that for Nafion® incorporated cationic redox species. The multicharged Fe(CN) ₆ couple accumulated in Tosflex® film causes an ion cross-linking of the polymeric backbone, thus decreasing ion transport in the film substantially.     

Electron-transfer studies in a lyotropic columnar hexagonal liquid crystalline medium

We have studied the electron-transfer properties of some redox systems on a gold electrode in a lyotropic hexagonal columnar liquid crystalline phase (H1 phase) using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The liquid crystalline medium consists of the nonionic surfactant Triton X-100 and water. The redox reactions that have been studied are ferrocene/ferricenium, [Fe(CN)6]3-/4-, and [Ru(NH3)6]3+/2+. We have confirmed by polarizing optical microscopy that the liquid crystalline nature of the medium is maintained even after the addition of the redox species and the supporting electrolyte. The CV studies show a significant shift in the half-peak potentials of these redox reactions in the liquid crystalline medium. From the EIS studies, we have measured the diffusion coefficients and the kinetic parameters for the redox species. These results are discussed and compared with the values obtained in the conventional solvent medium. The CV and impedance studies demonstrate that the hexagonal columnar phase provides a novel controlled environment for the study of electron-transfer reactions in biological and physiological media.     

Potentiometric flow injection determination of amylase activity by using hexacyanoferrate(III)-hexacyanoferrate(II) potential buffer

A highly sensitive potentiometric flow injection determination of amylase activity was carried out, utilizing a redox reaction of hexacyanoferrate(III) in alkaline media with reducing sugar as product of the enzymatic hydrolysis reaction of starch with amylase. The analytical method is based on the potential change detection of a flow-through type redox electrode detector due to the composition change of a [Fe(CN)(6)](3-)-[Fe(CN)(6)](4-) potential buffer solution, which is caused by the redox reaction with the product of the enzymatic reaction. A linear relationship exists between the potential change (peak height) and the activity of amylase. Amylase of a wide activity range from 2.5x10(-2) to 1.2x10(-4) U ml(-1) can be determined by the changing the concentrations of the [Fe(CN)(6)](3-)-[Fe(CN)(6)](4-) potential buffer from 10(-3) to 10(-5) M. The lower detection limit of amylase activity is 6.0x10(-5) U ml(-1). The sampling rate and relative standard deviation are 15 h(-1) and 0.9% (n=5) for 3.8x10(-3) U ml(-1) of amylase. The present method was successfully applied to determine amylase activity in real samples (commercial digestive medicines) with an accuracy of 4% compared with analytical results obtained using the present method with those achieved using the conventional titration method.     

Catalysis of H(2)/D(2) scrambling and other H/D exchange processes by [Fe]-hydrogenase model complexes

Protonation of the [Fe]-hydrogenase model complex (mu-pdt)[Fe(CO)(2)(PMe(3))](2) (pdt = SCH(2)CH(2)CH(2)S) produces a species with a high field (1)H NMR resonance, isolated as the stable [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+)[PF(6)](-) salt. Structural characterization found little difference in the 2Fe2S butterfly cores, with Fe.Fe distances of 2.555(2) and 2.578(1) A for the Fe-Fe bonded neutral species and the bridging hydride species, respectively (Zhao, X.; Georgakaki, I. P.; Miller, M. L.; Yarbrough, J. C.; Darensbourg, M. Y. J. Am. Chem. Soc. 2001, 123, 9710). Both are similar to the average Fe.Fe distance found in structures of three Fe-only hydrogenase active site 2Fe2S clusters: 2.6 A. A series of similar complexes (mu-edt)-, (mu-o-xyldt)-, and (mu-SEt)(2)[Fe(CO)(2)(PMe(3))](2) (edt = SCH(2)CH(2)S; o-xyldt = SCH(2)C(6)H(4)CH(2)S), (mu-pdt)[Fe(CO)(2)(PMe(2)Ph)](2), and their protonated derivatives likewise show uniformity in the Fe-Fe bond lengths of the neutral complexes and Fe.Fe distances in the cationic bridging hydrides. The positions of the PMe(3) and PMe(2)Ph ligands are dictated by the orientation of the S-C bonds in the (mu-SRS) or (mu-SR)(2) bridges and the subsequent steric hindrance of R. The Fe(II)(mu-H)Fe(II) complexes were compared for their ability to facilitate H/D exchange reactions, as have been used as assays of H(2)ase activity. In a reaction that is promoted by light but inhibited by CO, the [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) complex shows H/D exchange activity with D(2), producing [(mu-D)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) in CH(2)Cl(2) and in acetone, but not in CH(3)CN. In the presence of light, H/D scrambling between D(2)O and H(2) is also promoted by the Fe(II)(mu-H)Fe(II) catalyst. The requirement of an open site suggests that the key step in the reactions involves D(2) or H(2) binding to Fe(II) followed by deprotonation by the internal hydride base, or by external water. As indicated by similar catalytic efficiencies of members of the series, the nature of the bridging thiolates has little influence on the reactions. Comparison to [Fe]H(2)ase enzyme active site redox levels suggests that at least one Fe(II) must be available for H(2) uptake while a reduced or an electron-rich Fe(I)Fe(I) metal-metal bonded redox level is required for proton uptake.     

Reversible electrochemical switching of polyelectrolyte brush surface energy using electroactive counterions

Polyelectrolyte brushes with electroactive counterions provide an effective platform for surfaces with electrochemically switchable wetting properties. Polycationic poly(2-(methacryloyloxy)-ethyl-trimethyl-ammonium chloride) (PMETAC) brushes with ferricyanide ions ([Fe(CN)6] 3-) were used as the electrochemically addressable surface. After a negative potential of -0.5 V was applied to the [Fe(CN)6](3-)-coordinated PMETAC brushes, the [Fe(CN)6](3-) species were reduced to [Fe(CN)6](4-), and the surface became more hydrophilic. By application of alternating negative and positive potentials, PMETAC brushes were switched reversibly between the reduced state ([Fe(CN)6]4-) and oxidized state ([Fe(CN)6]3-), resulting in reversible changes in water contact angles. The time required for a complete contact angle change can be tuned from 1 to 20 s, by changing the brush thickness and the concentration of supporting electrolyte. We present an electrochemical brush transport model that includes the electrochemical reaction at the charged electrode and describes ion transport through the brush phase covering the electrode. The model quantitatively describes the response of the contact angle (hydrophilicity) to the applied voltage as a function of background ionic strength and brush thickness, supporting the proposed mechanism of ion transport through the brush and electrochemical reaction at the electrode. A typical diffusion constant for ferricyanide in a PMETAC brush of any thickness in 5 mM KCl supporting electrolyte was found to be 2 x 10(-15) m2 s(-1), 5 to 6 orders of magnitude smaller than its bulk solution value.     

Effect of applied potential on arylmethyl films oxidatively grafted to carbon surfaces

Arylmethyl films have been grafted to glassy carbon surfaces and to pyrolyzed photoresist films (PPFs) by electrochemical oxidation of 1-naphthylmethylcarboxylate and 4-methoxybenzylcarboxylate. Atomic force microscopy (AFM) and electrochemistry were used to characterize the as-prepared films and to monitor changes induced by post-preparation treatments. Film thickness was measured by depth profiling using an AFM tip to remove film from the PPF surface. Surface coverage of electroactive modifiers was estimated from cyclic voltammetry, and monitoring the response of a solution-based redox probe at grafted surfaces gave a qualitative indication of changes in film properties. For preparation of the films, the maximum film thickness increased with the potential applied during grafting, and all films were of multilayer thickness. The apparent rate of electron transfer for the Fe(CN)(6)3-/Fe(CN)(6)4- couple was very low at as-prepared films. After film-grafted electrodes were transferred to pure acetonitrile-electrolyte solution and subjected to negative potential excursions, the response of the Fe(CN)(6)3-/Fe(CN)(6)4- couple changed and was consistent with faster electron-transfer kinetics, the film thickness decreased and the surface roughness increased substantially. Applying a positive potential to the treated film reversed changes in film thickness, but the voltammetric response of the Fe(CN)(6)3-/Fe(CN)(6)4- couple remained kinetically fast. After as-prepared films were subjected to positive applied potentials in acetonitrile-electrolyte solution, the apparent rate of electron transfer for the Fe(CN)(6)3-/Fe(CN)(6)4- couple remained very slow and the measured film thickness was the same or greater than that before treatment at positive potentials. Mechanisms are considered to explain the observed effects of applied potential on film characteristics.     

Impedance sensing of allergen-antibody interaction on glassy carbon electrode modified by gold electrodeposition

The interactions between the recombinant dust mite allergen Der f2 and murine monoclonal antibody were monitored by electrochemical impedance spectroscopy (EIS). Allergen Der f2 were immobilized through the nanogold formed by electrodeposition of gold on planar glassy carbon electrode. A 30-s gold electrodeposition provided a desirable substrate for the immobilization of allergen. Electrochemical deposition of gold on a glassy carbon electrode showed significant improvement in allergen immobilization. The impedance measurements were based on the charge-transfer kinetics of the [Fe(CN)(6)](3-/4-) redox pair. The interactions between allergen and antibody occurred on electrode surface altered the interfacial electron transfer resistance, R(CT), by preventing the redox species approaching the electrode. The results showed that R(CT) increased with increasing concentration of monoclonal antibodies.     

Preparation, characterization, and electrocatalytic properties of hybrid coatings of hexacyanometalate-doped-cationic films

Electrochemically active hybrid coatings based on cationic films, didodecyldimethylammonium bromide (DDAB), and poly(diallyldimethylammonium chloride) (PDDAC) are prepared on electrode surface by cycling the film-covered electrode repetitively in a pH 6.5 solution containing Fe(CN)₆ ³⁻ and Ru(CN)₆ ⁴⁻ anions. Modified electrodes exhibited stable and reversible voltammetric responses corresponding to characteristics of Fe(CN)₆ ^3−/4− and Ru(CN)₆ ^4−/3− redox couples. The cyclic voltammetric features of hybrid coatings resemble that of electron transfer process of surface-confined redox couple. Electrochemical quartz crystal microbalance results show that more amounts of electroactive anionic complexes partitioned into DDAB coating than those doped into PDDAC coating from the same doping solution. Peak potentials of hybrid film-bound redox couples showed a negative shift compared to those at bare electrode and this shift was more pronounced in the case of DDAB. Finally, the advantages of hybrid coatings in electrocatalysis are demonstrated with sulfur oxoanions.     

Redox switching of polyoxometalate-methylene blue-based layer-by-layer films

Iron-substituted crown-type polyoxometalate (POM) [P(8)W(48)O(184)Fe(16)(OH)(28)(H(2)O)(4)](20-) has been successfully immobilized onto glassy carbon electrode surfaces by means of the layer-by-layer (LBL) technique employing the cationic redox active dye, methylene blue (MB). The constructed multilayers exhibit pH-dependent redox activity for both the anionic POM and the cationic dye moieties, which is in good agreement with their solution behavior. The films have been characterized by alternating current impedance, atomic force microscopy, and X-ray photoelectron spectroscopy, whereby the nature of the outer layer within the assemblies was found to have an effect upon the film's behavior. Preliminary investigations show that the POM dye-based films show electrocatalytic ability toward the reduction of hydrogen peroxide, however, only when there is an outer anionic POM layer.     

electrochemical generation of a nonheme oxoiron(IV) complex

The complex [Fe(IV)O(N4Py)]2+ (N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) has been prepared by bulk electrolysis in aqueous CH3CN and CH2Cl2, and its redox properties characterized. Bulk chronocoulometry and spectropotentiometry experiments in CH3CN show that [Fe(II)(N4Py)(NCCH3)]2+ can be oxidized quantitatively to its iron(III) derivative at an applied potential of +0.71 V vs ferrocene and then to the oxoiron(IV) complex (in the presence of added water) at potentials above +1.3 V. The E1/2 value for the Fe(IV/III) couple has been estimated to be +0.90 V from spectropotentiometric titrations in CH3CN and cyclic voltammetric measurements in CH2Cl2.