Heterobimetallic [Ru(II)/Fe(II)] complexes: On the formation of trans- and cis-[RuCl2(dppf)(diimines)]

The synthesis and characterization of trans/cis-[RuCl₂(dppf)(diimines)], dppf = 1,1′-bis(diphenylphosphino)ferrocene; diimines = 2,2′-bipyridine (trans/cis-(1)), the new complexes with 4,4′-dimethyl-2,2′-bipyridine (trans/cis-(2)) and 1,10-phenanthroline (cis-(3)) are presented. The complexes were synthesized using two routes and the trans/cis-isomer formation is dependent upon conditions and the precursor applied. The trans-isomer (kinetic) readily isomerizes to the cis-isomer (thermodynamic) when exposed to light (fluorescent) and this process was followed by cyclic voltammetry and UV-vis. The electrochemical studies on these complexes reveal that Fe^(III)/Fe^(II) couples are insensitive to the isomer (trans/cis) formed, but the Ru^(III)/Ru^(II) couples are dependent on the isomer. Transfer-hydrogenation reactions for reduction of acetophenone were conducted using complexes cis-(1) and cis-(2) and the results are compared with that obtained for similar complexes. X-ray structure for cis-(3) are presented and discussed.     

The first bidentate phosphanylborohydride: Synthesis, structure, and reactivity towards [CpFe(CO)2I]

Deprotonation of the phosphane-borane adduct rac/meso-(HP(BH₃)(Ph)CH₂)₂ (2) with KH provides facile access to the bidentate phosphanylborohydride rac/meso-K₂[(P(BH₃)(Ph)CH₂)₂] (3). Treatment of 3 with two equivalents of [CpFe(CO)₂I] gives the dinuclear complex rac/meso-[(CpFe(CO)₂)₂-μ-(P(BH₃)(Ph)CH₂)₂] (4). Single crystals of the pure diastereomers meso-2, meso-3(thf)₄, and rac-4 have been grown from toluene/pentane, diethyl ether/thf, and benzene/pentane, respectively. The molecular structures of all three compounds have been determined by X-ray crystallography.     

Four isomers from the oxidative addition of Me3SnH to Os(CO)2(PPh3)3 and the crystal structure of Os(SnMeI2)I(CO)2(PPh3)2, in which the pairs of CO and PPh3 ligands are mutually trans

Reaction between Os(CO)₂(PPh₃)₃ and Me₃SnH produces Os(SnMe₃)H(CO)₂(PPh₃)₂ (1). Multinuclear NMR studies of solutions of 1 reveal the presence of four geometrical isomers, the major one being that with mutually cis triphenylphosphine ligands and mutually trans CO ligands. Os(SnMe₃)H(CO)₂(PPh₃)₂ undergoes a redistribution reaction, at the trimethylstannyl ligand, when treated with Me₂SnCl₂ giving Os(SnMe₂Cl)H(CO)₂(PPh₃)₂ (2). Solutions of 2 again show the presence of four isomers but now the major isomer is that with mutually trans triphenylphosphine ligands and mutually cis CO ligands. The redistribution reaction of 1 with SnI₄ produces Os(SnMeI₂)H(CO)₂(PPh₃)₂ (3) which exists in solution as only one isomer, that with mutually trans triphenylphosphine ligands and mutually trans CO ligands. Treatment of 3 with I₂ cleaves the Os-H bond with retention of geometry giving Os(SnMeI₂)I(CO)₂(PPh₃)₂ (4). The crystal structure of 4 has been determined. No isomerization of the trans dicarbonyl complex 4 occurs when 4 is heated, instead there is a formal loss of “MeSnI” and formation of OsI₂(CO)₂(PPh₃)₂ (5).     

Metal complexes with pyridone-based radicals: Preparation and properties of a dinuclear paddle-wheel copper(II) complex and a mononuclear palladium(II) complex

We prepared and characterized dinuclear copper(II) and mononuclear palladium(II) complexes coordinated with a pyridine-based open-shell ligand, 5-(4′,4′,5′,5′-tetramethylimidazoline-3′-oxide-1′-oxyl)-2(1H)-pyridone (=HL). In the copper(II) dinuclear complex [Cu₂(L)₄(DMF)₂] (1), four deprotonated ligands are coordinated as bridging ligands to form a paddle-wheel type unit. In the palladium(II) complex trans-[PdCl₂(HL)₂] (2), two HL ligands in the neutral hydroxypyridine form are coordinated to the trans positions of the metal ion via the nitrogen atoms. The hydroxyl groups of the ligands are hydrogen-bonded to the chlorine atoms of neighboring molecules, thereby creating a hydrogen-bonded double-chain molecular arrangement. Magnetic susceptibilities of these complexes were measured and analyzed. The small intramolecular antiferromagnetic interaction in the latter complex may originate from superexchange through the diamagnetic metal center.     

Synthesis of 1-(pyridylalkyl)-1-aza-3,6-diphosphacycloheptanes

Reactions of 1,2-bis[(hydroxymethyl)(phenyl)phosphino]ethane with primary pyridylalkylamines gave earlier unknown 1-aza-3,6-diphosphacycloheptanes containing the pyridyl group in the exocyclic substituent. The reactions were found to be stereoselective, preferentially yielding the racemate with the RR/SS-configuration of the P atoms. A mixture of diastereomers of 3,6-diphenyl-1-[2-(2-pyridyl)ethyl]-1-aza-3,6-diphosphacycloheptane reacted with dichloro(cycloocta-1,5-diene)platinum(II) to give cis-P,P-chelate complexes from the meso-isomer and bridged oligomeric complexes from the racemate.     

The reaction of manganese carbonyl with tert-butylisocyanide: Synthesis and characterization of cis- and trans-[Mn(BuNC)4(CN)(CO)]

The reaction of Mn₂(CO)₁₀ with tert-butyl isocyanide in the presence of 10 bar of carbon monoxide leads to the formation of cis- and trans-[Mn(^tBuNC)₄(CN)(CO)], 1a and 1b, in good yields together with [Mn(^tBuNC)₆]CN (2), as a minor product. Nevertheless, the reaction pathway highly depends on the reaction conditions. An interesting side-product is obtained, if chloroform is used during the workup procedure. Compound 3 is composed of cationic [Mn(^tBuNC)₅(CO)] units as well as dinuclear anionic [Mn(^tBuNC)₄(CO)(μ-CN)MnCl₃] moieties. If no additional CO pressure is applied to the system, the organic product N,N′-di-tert-butyl-3,5-bis-tert-butylimino-4-phenyl-cyclopent-1-ene-1,2-diamine (4), is formed in considerable amount. Compound 4 most probably is produced via a double benzylic C-H activation of the solvent toluene and the oligomerization of four isocyanide moieties. The reaction of 1b with Co(NO₃)₂ leads to the isolation of the trinuclear cyanide bridged coordination compound {[Mn(^tBuNC)₄) (CO) (μ-CN)]₂Co(NO₃)₂}, 5, in which the cobalt atoms are tetrahedrally surrounded by the two cyanide ligands and the η¹-coordinated nitro groups. In contrast to the reaction of 1b, treatment of the dicyano complexes cis- or trans-[Ru(^tBuNC)₄(CN)₂] with Co(NO₃)₂ results in the formation of the coordination polymers {[Ru(^tBuNC)₄(CN)₂]Co(NO₃)₂}_n, 7 (trans) and 9 (cis). All new compounds are characterized by X-ray diffraction experiments.     

Silicon-carbon unsaturated compounds. 73. Photolysis of cis- and trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane in the presence of tert-butyl alcohol and acetone

Irradiation of cis-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1a) in the presence of tert-butyl alcohol in hexane with a low-pressure mercury lamp bearing a Vycor filter proceeded with high stereospecificity to give cis-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2a), in 33% isolated yield, together with a 15% yield of 1-[(tert-butoxy)methylphenylsilyl]-4-(methylphenylsilyl)butane (3). The photolysis of trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1b) with tert-butyl alcohol under the same conditions gave stereospecifically trans-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2b) in 41% isolated yield, along with a 12% yield of 3. Similar photolysis of 1a and 1b with tert-butyl alcohol-d₁ produced 2a and 2b, respectively, in addition to 1-[(tert-butoxy)(monodeuteriomethyl)(phenyl)silyl]-4-(methylphenylsilyl)butane. When 1a and 1b were photolyzed with acetone in a hexane solution, cis- and trans-2,3-benzo-1-isopropoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (4a and 4b) were obtained in 25% and 23% isolated yield. In both photolyses, 1-(hydroxymethylphenylsilyl)-4-(methylphenylsilyl)butane (5) was also isolated in 4% and 5% yield, respectively. The photolysis of 1a with acetone-d₆ under the same conditions gave 4a-d₆ and 5-d₁ in 18% and 4% yields.     

Synthesis and molecular structures of dinuclear complexes with 1,2-dihydro-1,2-diphenyl-naphtho[1,8-c,d]1,2-diphosphole as a bridging ligand

A bisphosphine in which a PhP-PPh bond bridges 1,8-positions of naphthalene, 1,2-dihydro-1,2-diphenyl-naphtho[1,8-cd]-1,2-diphosphole (1), was used as a bridging ligand for the preparation of dinuclear group 6 metal complexes. Free trans-1, a more stable isomer having two phenyl groups on phosphorus centers mutually trans with respect to a naphthalene plane, was allowed to react with two equivalents of M(CO)₅(thf) (M = W, Mo, Cr) at room temperature to give dinuclear complexes (OC)₅M(μ-trans-1)M(CO)₅ (M = W (2a), Mo (2b), Cr (2c)). The preparation of the corresponding dinuclear complexes bridged by the cis isomer of 1 was also carried out starting from the free trans-1 in the following way. Mono-nuclear complexes M(trans-1)(CO)₅ (M = W (3a), Mo (3b), Cr (3c)) which had been prepared by a reaction of trans-1 with one equivalent of the corresponding M(CO)₅(thf) (M = W, Mo, Cr) complex, were heated in toluene, wherein a part of the trans-3a-c was converted to their respective cis isomer M(cis-1)(CO)₅. Each cis trans mixture of the mono-nuclear complexes 3a-c was treated with the corresponding M(CO)₅(thf) to give a cis trans mixture of the respective dinuclear complexes 2a-c. The cis isomer of the ditungsten complex 2a was isolated, and its molecular structure was confirmed by X-ray analysis, showing a shorter W?W distance of 5.1661(3) Å than that of 5.8317(2) Å in trans-2a.     

Linkage isomerism of the oximato group: The characterization of some mono- and binuclear square planar nickel(II) complexes of vicinal oxime-imine ligands

The reactions of the Schiff-base N,N-ethylenebis-(isonitrosoacetylacetoneimine), (H₂L), with Ni(II) acetate led to the formation of the yellow-orange complex LNi (I) in water and the red complex LNi (II) in ethanol. Both oximato groups in I are coordinated to the metal through the oximino-oxygen whereas in II one group is similarly coordinated while the other is coordinated through the oximino-nitrogen. Complex I was converted to complex II by boiling in chloroform and the conversion was reversed by reacting complex II with either piperidine or ethylenediamine. H₂L neutralized by ammonia reacted with Ni(II) chloride (1:1) and the complex formed was characterized as the red square planar bis-(4-iminopentane-2,3-dione 3-oximato)Ni(II);(III). This trans complex reacted with piperidine (1:4) to produce its cis configuration (IV). Complex III reacted with ethylenediamine (2:1) and 1,3-diaminopropane (1:1) to produce complexes II and V respectively of the identical structure. Attempted similar reaction (1:1) with either 1,4-diaminobutane or 1,5-diaminopentane led to the formation of the binuclear complexes VI and VII in which two molecules of complex III are linked together by -(CH₂)₄- and -(CH₂)₅-Moieties respectively. The suggested structures of the square planar Ni(II) complexes are based on analytical, spectral and magnetic moment evidence.     

Synthese ab-trans-anellierter derivate des tricyclischen diterpens pleuromutilin durch intramolekulare 1,5-hydrid-verschiebung

The Diterpene Pleuromutilin(1) reacts with orthoformicacid-trimethylester at room temperature almost quantitatively to give the 11-keto-3-methylester 2 with AB-trans-configuration. This conversion is shown to occur through a 1,5-hydride-shift between C3 and C11. Treatment of 2 with Lewis acid (ZnCl₂) initiated a retro-1,5-hydride-shift which resulted in the formation of Pleuromutilin(1). Mechanistic aspects and structure assignments, which are based on chemical and spectroscopic (¹H- and ¹³C-NMR) data are discussed.     

An improved synthesis of ethyl cis-5-iodo-trans-2-methylcyclohexanecarboxylate, a potent attractant for the Mediterranean fruit fly

Both racemic ethyl 5-iodo-2-methylcyclohexanecarboxylate (1), known as Mediterranean fruit fly attractant ceralure B₁, and its (−)-(1R,2R,5R) enantiomer 1a were conveniently synthesized from commercially available racemic trans-6-methyl-3-cyclohexenecarboxylic acid 2 or its (1R,6R) enantiomer 2a. Key steps included an asymmetric Diels-Alder reaction using a sultam auxiliary and cyclization of the unwanted trans-5-iodo-trans-2-methylcyclohexanecarboxylic acid (8) to the intermediate lactone 7 (or 8a to 7a). The new method may circumvent chromatographic separations and seems amenable to scale-up.     

Synthesis and reactions of a monosubstituted dithiirane 1-oxide, 3-(9-triptycyl)dithiirane 1-oxide

A 3-monosubstituted dithiirane 1-oxide, 3-(9-triptycyl)dithiirane 1-oxide, was prepared for the first time, by the reaction of (9-triptycyl)diazomethane and S₈O. The dithiirane 1-oxide was obtained as cis- and trans-isomers, and the structure of the trans-isomer was verified by X-ray crystallography. The cis-isomer isomerized gradually to the trans-isomer in solution. The divalent sulfur atom of the cis- and trans-dithiirane 1-oxides were removed on treatment with triphenylphosphine to give the corresponding Z- and E-sulfines, respectively. The reaction of the trans-dithiirane 1-oxide with (Ph₃P)₂Pt(C₂H₄) provided the (sulfenato-thiolato)Pt^II complex, and that with Lawesson's reagent yielded the 1,3,4,2-trithiaphospholane and 1,2,4,5,3-tetrathiaphosphorinane derivatives.     

Reaktive hydrido-iridium(III)-komplexe mit den schwach koordinierten anionen BF4−, CF3SO3− und C4F9SO3−

Oxidative addition of HBF₄, CF₃SO₃H and C₄F₉SO₃H to trans-(Ph₃P)₂Ir(L)Cl (L = CO, N₂) gives the highly reactive irridium(III) complexes (Ph₃P)₂Ir(L)(Cl)(H)(X) (X = BF₄, CF₃SO₃, C₄F₉SO₃), in which the anion X can be easily substituted by σ- and π-donors. In the dinitrogen complex (Ph₃P)₂Ir(N₂)(Cl)(H)(FBF₃) (2a) both the N₂ and BF₄ ligands are replaced by valinate, diethyldithiocarbamate or tertiary phosphines, respectively. 2a catalyzes the hydrogenation of cyclohexene and the isomerisation of 1,5-cyclooctadiene.     

Is rhodium tetroxide in the formal oxidation state VIII stable? a quantum chemical and matrix isolation investigation of rhodium oxides

The structures and reactions of different rhodium oxides and dioxygen complexes with RhO₄ stoichiometry were investigated by matrix isolation infrared spectroscopy and quantum chemical calculations. The inserted RhO₂ molecule reacted with dioxygen upon sample annealing to form the [(??¹-O₂)RhO₂] complex, which can further isomerize to the known [(??²-O₂)RhO₂] complex via infrared irradiation. Both experimental and theoretical studies suggest that the [(??¹-O₂)RhO₂] complex has a doublet ground state with non-planar C _s symmetry in which the O₂ ligand is end-on bonded to the rhodium centre. Although rhodium tetroxide is predicted to be a stable molecule with D _2d symmetry at different level of theory, no evidence is found for the formation of this Rh(VIII) species in noble gas matrices. Our experiments also suggest the formation of a new peroxo [Rh(??²-O₂)₂] complex, which is calculated to have a doublet ground state with D _2d symmetry. This peroxo complex undergoes isomerization to the known superoxo [Rh(??²-O₂)₂] complex via the rotation of the dioxygen ligand under infrared irradiation.     

Cationic methyl complexes of rhodium(III): synthesis, structure, and some reactions

Cationic methyl complex of rhodium(III), trans-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1) is prepared by interaction of trans-[Rh(Acac)(PPh₃)₂(CH₃)I] with AgBPh₄ in acetonitrile. Cationic methyl complexes of rhodium(III), cis-[Rh(Acac)(PPh₃)₂ (CH₃)(CH₃CN)][BPh₄] (2) and cis-[Rh(BA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (3) (Acac, BA are acetylacetonate and benzoylacetonate, respectively), are obtained by CH₃I oxidative addition to rhodium(I) complexes [Rh(Acac)(PPh₃)₂] and [Rh(BA)(PPh₃)₂] in acetonitrile in the presence of NaBPh₄. Complexes 2 and 3 react readily with NH₃ at room temperature to form cis-[Rh(Acac)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (4) and cis-[Rh(BA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (5), respectively. Complexes 1-5 were characterized by elemental analysis, ¹H and ³¹P{¹H} NMR spectra. Complexes 1, 2, 3 and 4 were characterized by X-ray diffraction analysis. Complexes 2 and 3 in solutions (CH₂Cl₂, CHCl₃) are presented as mixtures of cis-(PPh₃)₂ isomers involved into a fluxional process. Complex 2 on heating in acetonitrile is converted into trans-isomer 1. In parallel with that isomerization, reductive elimination of methyl group with formation of [CH₃PPh₃][BPh₄] takes place. Replacement of CH₃CN in complexes 1 and 2 by anion I⁻ yields in both cases the neutral complex trans-[Rh(Acac)(PPh₃)₂(CH₃)I]. Strong trans influence of CH₃ ligand manifests itself in the elongation (in solid) and labilization (in solution) of rhodium-acetonitrile nitrogen bond.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

The first asymmetric synthesis of all four isomers of cis- and trans-3,4-dihydroxy-3,4-dihydromollugin

Asymmetric synthesis of all the four stereoisomers of cis-3,4-dihydroxy-3,4-dihydromollugins 4 and 6 and trans-3,4-dihydroxy-3,4-dihydromollugins 5 and 7 was achieved. The O-methoxymethyl mollugin derivatives were dihydroxylated to (−)- and (+)-cis-3,4-dihydroxy-3,4-dihydromollugin derivatives using both AD-mix-α and AD-mix-β. Deprotection of the MOM-ethers of cis-dihydroxy compounds resulted in the targeted stereoisomers (−)-(3R,4R)-cis-3,4-dihydroxy-3,4-dihydromollugin 4, (−)-(3R,4S)-trans-3,4-dihydroxy-3,4-dihydromollugin 5, (+)-(3S,4S)-cis-3,4-dihydroxy-3,4-dihydromollugin 6 and (+)-(3S,4R)-trans-3,4-dihydroxy-3,4-dihydromollugin 7. These routes were paved with difficulties, for example, incompatibility of the substrates with AD-mixes, the unexpected formation of trans-dihydroxy compounds and failures in deprotection protocols.     

Water-soluble complexes MX2L2 (M = Pd,Pt; L = PPh2(C6H4-p-SO3K)): Synthesis,stereoisomerism, and catalytic activities for aromatic cyanation in n-heptane/water biphasic solution

Reaction of (COD)MX₂ (M = Pd, Pt; X = Cl, I; COD = 1,5-cyclooctadiene) and P(C₆H₅)₂(C₆H₄-p-SO₃K) afforded water-soluble complexes MX₂{P(C₆H₅)₂(C₆H₄-p-SO₃K)}₂ (M = Pd; X = Cl (1), M = Pt; X = Cl (2), I (3)) in high yields. Complexes 1–3 were fully characterized by various spectroscopic methods (IR, ¹H-, ¹³C{¹H}- and ³¹P{¹H}-NMR spectroscopy) and elemental analyses. For 1 and 3, a mixture of the cis- and trans-isomer was produced from the reaction. For 2, however, only the cis-isomer was obtained. The stereochemistry of 1–3 can be assigned by the chemical shifts and the ¹J(Pt–P) values in ³¹P{¹H}-NMR spectral data. The ratios of the cis/trans isomers of 1 and 3 obtained from reactions in a range of solvents with various dielectric constants resulted in a little variation. However, addition of aqueous potassium halide solution to a DMSO-d₆ solution of 1 and 3 considerably increased the ratio of the cis/trans, respectively, indicating a strong intramolecular interligand Coulombic repulsion between the ionic phosphine ligands is present. Catalytic cyanation of aromatic iodide with KCN/ZnCl₂ in n-heptane/water biphasic system has been tested in the presence of 1–3 with base.     

Water-soluble complexes MX2L2 (M = Pd,Pt; L = PPh2(C6H4-p-SO3K)): Synthesis,stereoisomerism, and catalytic activities for aromatic cyanation in n-heptane/water biphasic solution

Reaction of (COD)MX₂ (M = Pd, Pt; X = Cl, I; COD = 1,5-cyclooctadiene) and P(C₆H₅)₂(C₆H₄-p-SO₃K) afforded water-soluble complexes MX₂{P(C₆H₅)₂(C₆H₄-p-SO₃K)}₂ (M = Pd; X = Cl (1), M = Pt; X = Cl (2), I (3)) in high yields. Complexes 1–3 were fully characterized by various spectroscopic methods (IR, ¹H-, ¹³C{¹H}- and ³¹P{¹H}-NMR spectroscopy) and elemental analyses. For 1 and 3, a mixture of the cis- and trans-isomer was produced from the reaction. For 2, however, only the cis-isomer was obtained. The stereochemistry of 1–3 can be assigned by the chemical shifts and the ¹J(Pt–P) values in ³¹P{¹H}-NMR spectral data. The ratios of the cis/trans isomers of 1 and 3 obtained from reactions in a range of solvents with various dielectric constants resulted in a little variation. However, addition of aqueous potassium halide solution to a DMSO-d₆ solution of 1 and 3 considerably increased the ratio of the cis/trans, respectively, indicating a strong intramolecular interligand Coulombic repulsion between the ionic phosphine ligands is present. Catalytic cyanation of aromatic iodide with KCN/ZnCl₂ in n-heptane/water biphasic system has been tested in the presence of 1–3 with base.     

Synthesis and photophysicochemical properties of novel mononuclear rhodium(III) phthalocyanines

Chloro axially-substituted octa(4-isopropylphenoxy)rhodium(III)phthalocyanine, (R)₈PcRhCl (3), was reacted with the nitrogenous bases pyridine (Py) and pyrazine (Pyz) to give the axially-disubstituted octa(4-isopropylphenoxy)rhodium(III)phthalocyanines [(R)₈PcRhCl(L)] (4) and (5), L = (Py) and (Pyz), respectively. In this study, the fluorescence quantum yield (Φ_F), the phosphorescence quantum yield (Φ_phos) and the photodegradation quantum yield (Φ_pd) values for the newly synthesized rhodium phthalocyanine complexes (RhPcs) 4 and 5 are reported. The complexes have also been fully characterized by elemental analysis, FD mass spectrometry, FT-IR and ¹H NMR spectroscopy.