卟啉铝催化下二氧化碳与氧化环己烯共聚反应研究

利用四苯基卟啉氯化铝(TPPAlCl)与双三苯基膦氯化铵(PPNCl)组成的二元催化剂催化二氧化碳与氧化环己烯共聚合,80℃下反应9h,二氧化碳-氧化环己烯共聚物(PCHC)的收率为97.2％,分子量分布窄(Mw/Mn=1.12),但数均分子量仅为6.8×103.研究发现溶剂的浓度和极性变化对聚合过程中的链转移反应影响...     

Copolymerization of cyclohexene oxide and carbon dioxide using (salen)Co(III) complexes: synthesis and characterization of syndiotactic poly(cyclohexene carbonate)

Synthetic routes to a series of new (salen-1)CoX (salen-1 = N,N'-bis(salicylidene)-1,2-diaminoalkane; X = halide or carboxylate) species are described and the X-ray crystal structures of two (salen-1)CoX (salen- = N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-diaminocyclohexane; X = Cl, I) complexes are presented. (R,R)-(salen-)CoX (X = Cl, Br, I, OAc, pentafluorobenzoate (OBzF(5))) catalysts are active for the copolymerization of cyclohexene oxide (CHO) and CO(2), yielding syndiotactic poly(cyclohexene carbonate) (PCHC), a previously unreported PCHC microstructure. Variation of the salen ligand and reaction conditions, as well as the inclusion of [PPN]Cl ([PPN]Cl = bis(triphenylphosphine)iminium chloride) cocatalysts, has dramatic effects on the polymerization rate and the resultant PCHC tacticity. Catalysts rac-(salen-)CoX (salen- = N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-diaminopropane; X = Br, OBzF(5)) have high activities for CHO/CO(2) copolymerization, yielding syndiotactic PCHCs with up to 81% r-centered tetrads. Using Bernoullian statistical methods, PCHC tetrad and triad sequences were assigned in the (13)C NMR spectra of these polymers in the carbonyl and methylene regions, respectively.     

First direct evidence for stereospecific olefin epoxidation and alkane hydroxylation by an oxoiron(IV) porphyrin complex

We report in this study that an oxoiron(IV) porphyrin complex bearing electron-deficient porphyrin ligand, (TPFPP)FeIV=O (TPFPP = meso-tetrakis(pentafluorophenyl)porphinato dianion), shows reactivities similar to those found in oxoiron(IV) porphyrin pi-cation radicals. In the epoxidation of olefins by the (TPFPP)FeIV=O complex, epoxides were yielded as major products; cyclohexene oxide was the sole product formed in the epoxidation of cyclohexene, and stilbenes were stereospecifically oxidized to the corresponding epoxide products. More striking results were obtained in alkane hydroxylation reactions; the hydroxylation of adamantane afforded a high degree of selectivity for tertiary C-H bonds over secondary C-H bonds, and the hydroxylation of cis-1,2-dimethylcyclohexane yielded a tertiary alcohol product with >99% retention of stereochemistry. The latter result demonstrates that an oxoiron(IV) porphyrin complex hydroxylates alkanes with a high stereospecificity. Isotope labeling studies performed with H218O and 18O2 in the olefin epoxidation and alkane hydroxylation reactions demonstrated that oxygen atoms in oxygenated products derived from the oxoiron(IV) porphyrin complex.     

双二茂铁基醛亚胺钼（ＶＩ）配合物的合成及催化性能

通过二茂铁甲醛与丙二胺反应得到双二茂铁基醛亚胺配体N~1,N~3-双二茂铁亚甲基丙烷-1, 3-二胺(FcMP), FcMP与MoO_2Cl_2(THF)_2的四氢呋喃溶液作用, 合成了双二茂铁基醛亚胺钼(VI)配合物. 以配合物为催化剂, 叔丁基过氧化氢为氧化剂, 分别以苯乙烯和环己烯为底物, 考察了温度、时间、催化剂量及溶剂对于烯烃均相环氧化反应的催化性能的影响. 结果表明, 在最优实验条件下, 反应12 h, 环己烯的转化率为88%, 环氧环己烷的选择性为98%;苯乙烯的转化率为84%, 氧化苯乙烯的选择性为76%. 催化剂经简单分离可回收使用, 且催化活性基本保持不变. 同时对环氧化反应的机理进行了初步探讨.     

Catalytic epoxidation of cyclohexene by covalently linked manganese porphyrin–viologen complex

When a viologen-linked Mn(III)porphyrin complex with a short methylene-chain, in which a viologen is covalently linked by the methylene-chain into one phenyl group of 5,10,15,20-tetraphenylporphyrinatomanganese(III)chloride (Mn(III)(tpp)Cl), was used as a catalyst for a monooxygenation of cyclohexene in an air-equilibrated acetonitrile solution containing insoluble zinc powder as a reductant, more cyclohexene oxide was obtained as a single product than when Mn(tpp)Cl was used as a catalyst. Benzoic acid as a cleaving reagent of the dioxygen double-bond and 1-methylimidazole as a ligand to Mn porphyrin were further contained in the reaction mixture. This result implies that the viologen moiety in the viologen-linked Mn(III)porphyrin acted effectively as a mediator for electron transfer from zinc powder to the Mn(III)porphyrin moiety in the epoxidation cycle activating molecular dioxygen reductively. Though Mn(tpp)Cl was remarkably demetallated by H⁺ ion from benzoic acid during the epoxidation reaction in the mixed system of Mn(III)(tpp)Cl and viologen, the demetallation of the viologen-linked Mn porphyrin with the short methylene-chain was partly prevented because the reduction of a Mn(II)porphyrin-dioxygen adduct was easily caused by fast intramolecular electron-transfer between the two moieties of the viologen and the Mn porphyrin, proceeding the epoxidation cycle smoothly.     

Enhanced asymmetric induction for the copolymerization of CO2 and cyclohexene oxide with unsymmetric enantiopure salenCo(III) complexes: synthesis of crystalline CO2-based polycarbonate

Enantiopure metal-complex catalyzed asymmetric alternating copolymerization of CO(2) and meso-epoxides is a powerful synthetic strategy for preparing optically active polycarbonates with main-chain chirality. The previous studies regarding chiral zinc catalysts provided amorphous polycarbonates with moderate enantioselectivity, and thus, developing highly stereoregular catalysts for this enantioselective polymerization is highly desirable. Herein, we report the synthesis of highly isotactic poly(cyclohexene carbonate)s from meso-cyclohexene oxide using dissymmetrical enantiopure salenCo(III) complexes in conjunction with bis(triphenylphosphine)iminium chloride (PPNCl) as catalyst. The presence of a chiral induction agent such as (S)-propylene oxide or (S)-2-methyltetrahydrofuran significantly improved the enantioselectivity regarding (S,S)-salenCo(III) catalyst systems. Up to 98:2 of RR:SS was observed in the resultant polycarbonates obtained from the catalyst system based on (S,S)-salenCo(III) complex 4d bearing an adamantyl group on the phenolate ortho position, in the presence of (S)-2-methyltetrahydrofuran. Primary ONIOM (DFT:UFF) calculations, which were performed to investigate the effect of the competitive coordination of (S)-induction agent versus cyclohexene oxide to Co(III) center on enantioselectivity, suggest that the (S)-C-O bond in cyclohexene oxide is more favorable for cleavage, due to the interaction between oxygen atom of (S)-induction agent and (S)-C-H of the coordinated cyclohexene oxide. The highly isotactic poly(cyclohexene carbonate) is a typical semicrystalline polymer, possessing a melting point of 216 °C and a decomposition temperature of 310 °C.     

An Overview of Heterogeneous Transition Metal-Based Catalysts for Cyclohexene Epoxidation Reaction

Cyclohexane epoxide, which contains highly active epoxy groups, plays a crucial role as an intermediate in the preparation of fine chemicals. However, controlling the epoxidation pathway of cyclohexene is challenging due to issues such as the allylic oxidation of cyclohexene and the ring opening of cyclohexane epoxide during the cyclohexene epoxidation process to form cyclohexane oxide. This review focuses on the structure-activity relationships and synthesis processes of various heterogeneous transition metal-based catalysts used in cyclohexene epoxidation reactions, including molybdenum(Mo)-based, tungsten(W)-based, vanadium(V)-based, titanium(Ti)-based, cobalt(Co)-based, and other catalysts. Initially, the mechanism of cyclohexene epoxidation by transition metal-based catalysts is examined from the perspective of catalytic active centers. Subsequently, the current research of cyclohexene epoxidation catalysts is summarized based on the perspective of catalyst support. Additionally, the differences between alkyl hydroperoxide, hydrogen peroxide (H₂O₂), and oxygen (O₂) as oxidants are analyzed. Finally, the main factors influencing catalytic performance are summarized, and reasonable suggestions for catalyst design are proposed. This work provides scientific support for the advancement of the olefin epoxidation industry.     

The role of outer-sphere surface acidity in alkene epoxidation catalyzed by calixarene-Ti(IV) complexes

Cooperativity between Br?nsted acidic defect sites on oxide surfaces and Lewis acid catalyst sites consisting of grafted calixarene-Ti(IV) complexes is investigated for controlling epoxidation catalysis. Materials are synthesized that, regardless of the surface or calixarene substituent, demonstrate nearly identical UV-visible ligand-to-metal charge-transfer bands and Ti K-edge X-ray absorption near edge spectral features consistent with site-isolated, coordinatively unsaturated Ti(IV) atoms. Despite similar Ti frontier orbital energies demonstrated by these spectra, replacing a homogeneous triphenylsilanol ligand with a silanol on a SiO2 surface increases cyclohexene epoxidation rates with tert-butyl hydroperoxide 20-fold per Ti site. Supporting calixarene-Ti active sites on fully hydroxylated Al2O3 or TiO2, which possess lower average surface hydroxyl pKa than that of SiO2, reduces catalytic rates 50-fold relative to SiO2. These effects are consistent with SiO2 surfaces balancing two competing factors that control epoxidation rates-equilibrated hydroperoxide binding at Ti, disfavored by stronger surface Br?nsted acidity, and rate-limiting oxygen transfer from this intermediate to alkenes, favored by strongly H-bonding intermediates. These observations also imply that Ti-OSi rather than Ti-OCalix bonds are broken upon hydroperoxide binding to Ti in kinetically relevant steps, which is verified by the lack of a calixarene upper-rim substituent effect on epoxidation rate. The pronounced sensitivity of observed epoxidation rates to the support oxide, in the absence of changes to the Ti coordination environment, provides experimental evidence for the importance of outer-sphere H-bonding interactions for the exceptional epoxidation reactivity of titanium silicalite and related catalysts.     

Factors affecting the catalytic epoxidation of olefins by iron porphyrin complexes and H2O2 in protic solvents

The catalytic epoxidation of cyclohexene by iron(III) porphyrin complexes and H2O2 has been investigated in alcohol solvents to understand factors affecting the catalyst activity in protic solvents. The yields of cyclohexene oxide and the Fe(III/II) reduction potentials of iron porphyrin complexes were significantly affected by the protic solvents, and there was a close correlation between the product yields and the reduction potentials of the iron porphyrin catalysts. The role of alcohol solvents was proposed to control the electronic nature of iron porphyrin complexes that determines the catalyst activity in the epoxidation of olefins by H2O2. We have also demonstrated that an electron-deficient iron porphyrin complex can catalyze the epoxidation of olefins by H2O2 under conditions of limiting substrate with high conversion efficiency in a solvent mixture of CH3OH and CH2Cl2.     

Catalytic dioxygen activation by Co(II) complexes employing a coordinatively versatile ligand scaffold

The ligand bis(2-isobutyrylamidophenyl)amine has been prepared and used to stabilize both mononuclear and dinuclear cobalt(II) complexes. The nuclearity of the cobalt product is regulated by the deprotonation state of the ligand. Both complexes catalytically oxidize triphenylphosphine to triphenylphosphine oxide in the presence of O(2).     

Two routes to 1,2-cyclohexanediol catalyzed by zeolites under solvent-free condition

Two routes to 1,2-cyclohexanediol were studied. Specifically: (a) the hydrolysis of cyclohexene oxide and (b) the direct dihydroxylation of cyclohexene with aqueous hydrogen peroxide. Both reactions were carried out with zeolites as catalysts under solvent-free conditions, aiming to establish green routes for the synthesis of 1,2-cyclohexanediol. In the first route, H-Beta and H-ZSM-5 zeolites were used as catalysts, respectively. According to the results, H-ZSM-5 was a suitable catalyst for the hydrolysis of cyclohexene oxide. A 88.6 % yield of 1,2-cyclohexanediol could be obtained at a 96.2 % conversion of cyclohexene oxide under mild conditions, and the catalyst could be reused for three times. Compared with H-ZSM-5, H-Beta gave a much lower selectivity (63 %), although it was more active. In the second route, Ti-Beta zeolites with three different Ti loadings prepared via a simple two-step strategy were characterized and used. The results indicated that it was the framework Ti species which was responsible for the catalytic activity. The resultant Ti-Beta-3 % could give a 90.2 % cyclohexene conversion at a 66.2 % selectivity of 1,2-cyclohexanediol.     

μ‐Phthalocyaninato‐bis(triphenylphosphinoxidnatrium): Synthese und Kristallstruktur

μ‐Phthalocyaninato‐bis({triphenylphosphine oxide}sodium): Synthesis and Crystal Structure Blue μ‐phthalocyaninato‐bis({triphenylphosphine oxide}sodium) ( 1 ) is prepared by heating triphenylphosphine oxide with disodium phthalocyaninate at 160 °C. 1 is centrosymmetric (space group P1). The Na atom is located in a tetragonal pyramid co‐ordinating four isoindole N atoms at a distance varying between 2.409(2) and 2.438(2) Å, and one O atom at 2.198(2) Å. The Na–Na distance is 2.823(5) Å, and the Na–O–P angle is 145.5(1)°.     

Reactivity of alkyl versus silyl peroxides. The consequences of 1, 2-silicon bridging on the epoxidation of alkenes with silyl hydroperoxides and bis(trialkylsilyl)peroxides

The bond dissociation energies for a series of silyl peroxides have been calculated at the G2 and CBS-Q levels of theory. A comparison is made with the O-O BDE of the corresponding dialkyl peroxides, and the effect of the O-O bond strength on the activation barrier for oxygen atom transfer is discussed. The O-O bond dissociation enthalpies (DeltaH(298)) for bis (trimethylsilyl) peroxide (1) and trimethylsilyl hydroperoxide (2) are 54.8 and 53.1 kcal/mol, respectively at the G2 (MP2) and CBS-Q levels of theory. The O-O bond dissociation energies computed at G2 and G2(MP2) levels for bis(tert-butyl) peroxide and tert-butyl hydroperoxide are 45.2 and 48.3 kcal/mol, respectively. The barrier height for 1,2-methyl migration from silicon to oxygen in trimethylsilyl hydroperoxide is 47.9 kcal/mol (MP4//MP2/6-31G). The activation energy for the oxidation of trimethylamine to its N-oxide by bis(trimethylsilyl) peroxide is 28.2 kcal/mol (B3LYP/6-311+G(3df,2p)// B3LYP/6-31G(d)). 1,2-Silicon bridging in the transition state for oxygen atom transfer to a nucleophilic amine results in a significant reduction in the barrier height. The barrier for the epoxidation of E-2-butene with bis(dimethyl(trifluoromethyl))silyl peroxide is 25.8 kcal/mol; a reduction of 7.5 kcal/mol relative to epoxidation with 1. The activation energy calculated for the epoxidation of E-2-butene with F(3)SiOOSiF(3) is reduced to only 2.2 kcal/mol reflecting the inductive effect of the electronegative fluorine atoms.     

Alternating copolymerization of cyclohexene oxide and carbon dioxide under cobalt porphyrin catalyst

Cobalt porphyrin complexes（TPPCo^ⅢX）（TPP = 5,10,15,20-tetraphenyl-porphyrin;X = halide） in combination with bis（triphenylphosphine） iminium chloride（PPNCl） were used for the copolymerization of cyclohexene oxide and CO₂. The highest turnover frequency of 67.2 h^-1 was achieved after 13 h at 20℃,and the obtained poly（1,2-cyclohexylene carbonate）（PCHC） showed number average molecular weight（M_n） of 10×10³.Though the obtained PCHC showed atactic structure,the m-centered tetrads content reached 58.1%at CO₂ pressure of 1.0 MPa,and decreased to 51.9%at CO₂ pressure of 6.0 MPa,indicating that it was inclined to form atactic polymer at high CO₂ pressure.     

N,N’-双(2’-羟基苯乙酮)缩二胺合锰(Ⅲ)的合成和催化烯烃环氧化研究

本文合成了N,N’-双(2’-羟基苯乙酮)缩乙二胺、N,N’-双(2’-羟基苯乙酮)缩1,2-丙二胺、N,N’-双(2’-羟基苯乙酮)缩1,3-丙二胺和N,N’-双(2’-羟基苯乙酮)缩邻苯二胺四种Schiff配体以及它们的锰(Ⅲ)配合物1,2,3和4。并考察了这四种锰(Ⅲ)配合物作为催化剂,催化以NaOCl为氧源环氧化苯乙烯和环己烯的反应的性能。同时考察了反应温度、助配体、NaOCl的浓度以及pH值对催化环氧化反应的影响。     

Synthesis of the first rNHC (remote N-heterocyclic carbene) complexes with no heteroatom in the carbene carbon-containing ring

Two cationic carbene complexes with no heteroatom in the ring containing the carbene carbon, trans-bromo(2-methyl-2,6-dihydroisoquinolin-6-ylidene)bis(triphenylphosphine)palladium(II) triflate (3) and trans-chloro(1,2-dimethyl-1,7-dihydroquinolin-7-ylidene)bis(triphenylphosphine)palladium(II) triflate (4), were synthesized by oxidative substitution of Pd(PPh3)4 with N-methylated 6-bromoisoquinolinium and 7-chloro-2-methylquinolinium cations, respectively. Compound 3 was also prepared by methylation of neutral trans-bromo(2-methylisoquinolin-6-yl)bis(triphenylphosphine)palladium(II) (5). All complexes were unambiguously characterized by NMR and X-ray crystallographic studies.     

Effects of the preparation method and calcination temperature on Cu–Cr–Mg–Al catalysts for the dehydrogenation of cyclohexanol

Novel dioxomolybdenum(VI) complexes bearing bis(ferrocenylcarbaldimine) ligands were prepared in good yield and characterized by spectroscopy and elemental analysis. The complexes were found to be excellent catalysts for the homogeneous epoxidation of cyclohexene and styrene using tert-butyl hydroperoxide (TBHP) as oxidant. The complexes can be recovered and reused.     

EPR, 1H and 2H NMR, and reactivity studies of the iron-oxygen intermediates in bioinspired catalyst systems

Complexes [(BPMEN)Fe(II)(CH(3)CN)(2)](ClO(4))(2) (1, BPMEN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane) and [(TPA)Fe(II)(CH(3)CN)(2)](ClO(4))(2) (2, TPA = tris(2-pyridylmethyl)amine) are among the best nonheme iron-based catalysts for bioinspired oxidation of hydrocarbons. Using EPR and (1)H and (2)H NMR spectroscopy, the iron-oxygen intermediates formed in the catalyst systems 1,2/H(2)O(2); 1,2/H(2)O(2)/CH(3)COOH; 1,2/CH(3)CO(3)H; 1,2/m-CPBA; 1,2/PhIO; 1,2/(t)BuOOH; and 1,2/(t)BuOOH/CH(3)COOH have been studied (m-CPBA is m-chloroperbenzoic acid). The following intermediates have been observed: [(L)Fe(III)(OOR)(S)](2+), [(L)Fe(IV)═O(S)](2+) (L = BPMEN or TPA, R = H or (t)Bu, S = CH(3)CN or H(2)O), and the iron-oxygen species 1c (L = BPMEN) and 2c (L = TPA). It has been shown that 1c and 2c directly react with cyclohexene to yield cyclohexene oxide, whereas [(L)Fe(IV)═O(S)](2+) react with cyclohexene to yield mainly products of allylic oxidation. [(L)Fe(III)(OOR)(S)](2+) are inert in this reaction. The analysis of EPR and reactivity data shows that only those catalyst systems which display EPR spectra of 1c and 2c are able to selectively epoxidize cyclohexene, thus bearing strong evidence in favor of the key role of 1c and 2c in selective epoxidation. 1c and 2c were tentatively assigned to the oxoiron(V) intermediates.     

Synthesis and characterization of novel aromatic polyimides from 4,4‐bis(p‐aminophenoxymethyl)‐ 1‐cyclohexene

A novel diamine, 4,4‐bis(p‐aminophenoxymethyl)‐1‐cyclohexene (CHEDA), was synthesized from 4,4‐bis(hydroxymethyl)‐1‐cyclohexene and p‐chloronitrobenzene by nucleophilic aromatic substitution and subsequent catalytic reduction of the intermediate dinitro compound. A series of aromatic polyimides were prepared from CHEDA and commercial dianhydrides with varying flexibility and electronic character in two‐step direct polycondensation reactions. High molecular weight polyimides with intrinsic viscosities between 0.57 and 10.2 dL/g were obtained. Most of these polyimides, excluding those from PMDA and BPDA, were soluble in polar aprotic solvents such as NMP and DMAc, and many were also soluble in CHCl₃ and THF. DSC analysis revealed glass transitions in the range of 190 to 250°C. No significant weight losses occurred below 450°C in nitrogen and 350°C in air. Bromination and epoxidation of cyclohexene double bond in CHDEA–6FDA (3e) were investigated as examples of possible polymer modifications. Qualitative epoxidation and selective bromination of the double bond were demonstated. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1189–1197, 1999     

Dioxotungsten 1,2-benzenedithiolate complex stabilized by NH...S hydrogen bonds

Novel dioxo-tungsten(VI) bis(1,2-benzenedithiolate) complexes with neighboring amide groups, as models for tungsten enzymes, (NEt4)2[W(VI)O2{1,2-S(2)-3,6-(RCONH)2C6H2}2] (R = CH3, t-Bu), were designed and synthesized. The presence of the NH...S hydrogen bond was confirmed through IR spectrometry and X-ray crystallographic analysis. In the W(VI)O2 complexes, the NH...S hydrogen bond trans to the oxo ligand is stronger than that cis to oxo. On the basis of comparisons with [W(VI)O2(1,2-S2C6H4)2](2-), the NH...S hydrogen bond positively shifted the W(VI)/W(V) redox potentials and depressed the reduction by benzoin or triphenylphosphine. These results suggest that the NH...S hydrogen bond stabilizes the oxo ligand through trans influence and regulates O-atom transfer in tungsten and molybdenum enzymes.