Photo-SRN1 reactions of phenyl telluride anion with haloarenes

Phenyl telluride anion was prepared in liquid ammonia by reaction of dipheyyl ditelluride with two equivalents of sodium metal under nitrogen. This anion reacts with haloarenes under irradiation to form aryl phenyl tellurides, probably by the photo-S_RN1 mechanism of aromatic substitution.     

Preparation and comparison of the photoelectronic properties of Sr2Nb2O7 and Ba0.5Sr0.5Nb2O6

The two alkaline earth niobates Sr₂Nb₂O₇ and Ba_0.5Sr_0.5Nb₂O₆ have been prepared, their electronic properties measured, and their photoresponses compared. The indirect band gap in Sr₂Nb₂O₇ is 3.86 eV compared with 3.38 eV for Ba_0.5Sr_0.5Nb₂O₆. Hence, photoanodes composed of Sr₂Nb₂O₇ respond to much less of the “white” light spectrum than those made from Ba_0.5Sr_0.5Nb₂O₆. Nevertheless, their electrical outputs at an anode potential of 0.8 eV with respect to SCE in 0.2 M sodium acetate under “white” xenon arc irradiation of 1.25 W/cm² are comparable.     

Hydroxide flux synthesis and crystal structure of the ordered palladate, LuNaPd6O8

We report the single crystal structure of LuNaPd₆O₈ grown from a sodium hydroxide flux. The utilization of a hydroxide flux has led to the preparation of the first ordered substitution of a lanthanide metal and an alkali metal on the A-site in a platinum group oxide and the first palladate to contain both a lanthanide metal and an alkali metal. The 1:1 ordered substitution of Lu³⁺ and Na⁺ in place of the commonly observed divalent cation leads to slabs of LuO₈ and NaO₈ cubes bridged together by PdO₄ square planes. The compound crystallizes in the cubic space group Pm-3 (#200) with a=5.72500(10) Å and is structurally related to other cubic palladium oxides.     

Photodissociation/gas-diffusion separation and fluorimetric detection for the analysis of total and labile cyanide in a flow system

Total cyanide species are determined in a flow injection system which includes UV-photodissociation, gas-diffusion separation and spectrofluorimetric detection. Without the irradiation step, only cyanide easily released in acid medium, i.e. labile cyanide, is determined. Cyanide diffuses through a microporous PTFE membrane from an acid donor stream to a sodium hydroxide acceptor stream. Then, the transferred cyanide reacts with ¶o-phthalaldehyde and glycine to form a highly fluorescent isoindole derivative. Complete cyanide recoveries were obtained for the most important metal cyanide complexes found in environmental samples, excepting cobaltocyanide. The sampling frequency for total cyanide was 4 samples h^–1 and the detection limit was 0.4 μg L^–1. Recoveries of total cyanide from river water obtained with this method are about 90% of those obtained with APHA Method 4500-CN C for total cyanide.     

Synthesis of CuAPTPP-TDI-TiO2 Conjugated Microspheres and its Photocatalytic Activity (cited: 1)

The metal complex 5-(4-aminophenyl)-10,15,20-triphenylporphyrin copper (CuAPTPP) was covalently linked on the surface of TiO₂ microspheres by using toluene disocyanate (TDI) as a bridging bond unit. The hydroxyl group (-OH) of TiO₂ microspheres surface and the amino group (-NH₂) of CuAPTPP reacted respectively with the active -NCO groups of TDI to form a surface conjugated microsphere CuAPTPP-TDI-TiO₂ that was confirmed by FT-IR spectra. The CuAPTPP-TDI-TiO₂ microspheres were characterized with UV-visible, elemental analysis, XRD, SEM, and UV-Vis diffuse reflectance spectra. The effect of amounts of linked TDI on the performance of photocatalytic microspheres was discussed, and the optimal molar ratio of TDI:TiO₂ was established. The photocatalytic activity of CuAPTPP-TDI-TiO₂ was evaluated using the photocatalytic degradation of methylene blue (MB) under visible-light irradiation. The results showed that, TDI, as a bond unit, was used to form a steady chemical brigdging bond linking CuAPTPP and the surface of TiO₂ microspheres, and the prepared catalyst exhibited higher photocatalytic activity under visible-light irradiation for MB degradation. The degradation rate of 20 mg/L MB could reach 98.7% under Xe-lamp (150 W) irradiation in 120 min. The degradation of MB followed the first-order reaction model under visible light irradiation, and the rate constant of 5.1×10^-2 min^-1 and the half-life of 11.3 min were achieved. And the new photocatalyst can be recycled for 4 times, remaining 90.0% MB degradation rate.     

Thermally-reversible photoisomerization of trans-dinitrobis(tri-N-propylphosphine)palladium(II)

UV irradiation of trans-dinitrobis(tri-n-propylphosphine)palladium(II) in MeOH yields a photostationary trans-cis mixture which reverts quantitatively in the dark to the trans-form. The cis-isomer, which can be isolated in crystalline form by irradiation of trans-species in n-hexane, has been characterized by UV, IR ¹H and ³¹P NMR spectroscopy. Irradiation of a 1/1 mixture of trans-[(PBu₃ⁿ)₂Pd(NO₂)₂] and trans-[(PPr₃ⁿ)₂Pd(NO₂)₂] gives almost entirely a 1/1 mixture of the corresponding cis-isomer, indicating an intramolecular process.     

Structures of active sites for alkane transformations over the Pt/HZSM-5 and Pt/NaZSM-5 catalysts

The structure and reactivity of Pt₆ particles in the sodium and hydrogen forms of the ZSM-5 zeolite were investigated by the DFT method. Upon adsorption on the sodium form, the interaction energy is 15 kcal mol⁻¹ and a negative charge appears on the metal cluster. In channels of the hydrogen form, the adsorption energy of the metal particle increases to 45 kcal mol⁻¹ and the oxidized states of platinum are formed. The formation of an active site in the H-form of the zeolite involves the interaction of the platinum particle with the acid site resulting in the suppression of the acidity of the support. An alternative mechanism of alkane transformations avoiding acid site participation was proposed. A possibility to envisage the direction of the transformation of alkanes adsorbed on the metal particles was shown. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1139–1144, June, 2008.     

The dependence of the metal—molecule vibrational frequency on the mass of the adsorbate and its relevance to the role of adatoms in surface-enhanced raman scattering

It has been suggested by Lombardi, Shields Knight and Birke that one can distinguish between an adsorbed molecule bonded “directly” to a metal surface as opposed to one bonded to a metal adatom which is itself bound to a metal surface by plotting the adsorbate—adsorbent vibrational frequency for a series of cognate molecules, alternatively against m_ads^?1/2 and (1/m_ads + 1/m_metal)^1/2. (m_ads and m_metal are, respectively the mass of the adsorbate and a metal atom.) If a proportional relationship is obtained in the former case then the molecule is bonded to the bulk metal, if in the latter case then it is bonded to an adatom. We show using two model calculations that that proposal is incorrect. Both proportional and non-proportional dependences may be obtained for either mode of bonding.     

Application of an Ion Beam Technique for the Design of Visible Light-Sensitive, Highly Efficient and Highly Selective Photocatalysts: Ion-Implantation and Ionized Cluster Beam Methods

As a new concept for the design of effective photocatalysts, an ion beam technology using accelerated metal ions, a metal ion implantation and an ionized cluster beam (ICB) method, have been applied to design unique photocatalysts. The metal ion implantation of TiO₂ and Ti-containing zeolites with highly accelerated metal ions (V⁺, Cr⁺, etc.) is useful in designing photocatalysts that can operate efficiently under visible light irradiation. Also, an ICB method with a low acceleration energy is useful in preparing transparent TiO₂ thin films on various types of substrates for the efficient photocatalytic degradation of pollutants diluted in water and air. The combination of the ICB method and metal ion implantation can develop the TiO₂ thin films that are able to operate not only under UV light but also under visible light irradiation.     

Solid-state Na and C NMR characterization of Na3C60

Two separate samples of Na₃C₆₀ were prepared by direct reaction of C₆₀ with sodium metal vapor, and subjected to different annealing times of 10 days and 16 days. Solid-state ¹³C and ²³Na NMR, along with elemental analysis, powder X-ray diffraction (XRD) and Raman spectroscopy, were used to characterize both samples. The Raman spectra of both materials have a single peak at 1447 cm⁻¹ which correspond to the A_g peak of C₆₀³⁻, consistent with the stoichiometry of Na_xC₆₀ with x=3. The powder XRD patterns are also virtually identical for both samples. However, solid-state ²³Na and ¹³C NMR spectra of the two samples are significantly different, suggesting a relationship between annealing times and the final structure of the alkali fulleride. Variable-temperature ²³Na magic-angle spinning (MAS) NMR experiments reveal the existence of two or three distinct sodium species and reversible temperature-dependent diffusion of sodium ions between octahedral and tetrahedral interstitial sites. ¹³C MAS NMR experiments are used to identify resonances corresponding to free C₆₀ and fulleride species, implying that the samples are segregated-phase materials composed of C₆₀ and non-stoichiometric Na₃C₆₀. Variable-temperature ¹³C MAS NMR experiments reveal temperature-dependent motion of the fullerides.     

Photoluminescence and Raman spectroscopy studies on polyaniline/PbI2 composite

Functionalization of PbI₂ with conjugated polymers (polyaniline-emeraldine base (PANI-EB) or polyaniline-emeraldine salt (PANI-ES)) is demonstrated by Raman and luminescence studies. PbI₂/PANI hybrid material was prepared by electrochemical polymerization of aniline onto the PbI₂ modified Pt electrode and mechanico-chemical reaction between the two constituents. PANI interacting with the PbI₂ gives rise to new Raman bands at 80, 144 and 170 cm⁻¹. First line reveals the formation of “stacking faults” that disrupt the I-Pb-I layers stacking along the c axis by the insertion of polymer molecules. The bands at 144 and 170 cm⁻¹ are attributed to the vibrational mode associated with Pb-NHR″₂ (R″=C₆H₄) bond. The functionalization of PbI₂ with PANI-EB brings forth the PANI-ES form. Depending on the semiconducting (PANI-EB) or conducting (PANI-ES) properties of the polymer in the PbI₂/PANI intercalated material, a partial or total collection of the charges generated under band to band irradiation is revealed by photoluminescence studies.     

Ag/TiO2光催化还原硝酸氮

利用化学还原法制备不同Ag掺杂量TiO₂纳米催化剂,采用TEM、XRD、XRF和UV-Vis对催化剂进行表征。考察了催化剂在紫外光(254 nm)和可见光照射下还原初始浓度100 mgN·L^-1水相硝酸氮的活性和效果。重点考察了紫外光照射下Ag掺杂量、不同空穴捕获剂(甲酸、甲醇、乙酸、乙醇、草酸、草酸钠等)及甲酸浓度对硝酸氮还原的影响;对硝酸氮转化率和总氮去除率、形成亚硝酸氮、氨氮浓度及氮气选择性的影响。甲酸浓度为0.030 mol·L^-1、Ag掺杂量为1.0wt%时催化剂效果最佳。此时,硝酸氮、总氮的转化率分别为98.43%、78.13%;亚硝酸氮浓度为零,转化的硝酸氮中只有20.76%转化为氨氮,氮气选择性为79.24%。可见光下进行光催化还原反应时,硝酸氮转化率仅37.98%,但氮气的选择性较高。     

N-(Trifluoromethylsulfonyl)trifluoromethanesulfinimidic acid and its salts

Lithium, sodium and potassium N-(trifluoromethylsulfonyl)trifluoromethanesulfinimidates were obtained by the reaction of the corresponding sulfinimidoyl chloride with alkali metal trimethylsilanolates. The potassium and sodium salts were converted to the free acid, having predominantly the amidic tautomeric structure, CF₃S(O)NHSO₂CF₃, by treatment with concentrated H₂SO₄ or with H⁺-cationite.     

Nucleophilic addition of methanol and methanethiol to acetylene in the superbasic system KOH-DMSO: a quantum chemical model

Cluster-continuum models (KOH·nDMSO, n = 1, 5) were used to model the superbasic system “alkali metal hydroxide-dimethyl sulfoxide” within the framework of MP2/6-311++G**/ and B3LYP/6-31G* methods. The KOH molecule surrounded by five DMSO molecules exists as “solvate-loosened” ion pair with elongated K-O distance. It is proposed to consider the “solvate-loosened” ion pair of potassium cation with hydroxide anion in the surroundings of five solvent molecules as the catalytic coordination sphere of the superbasic system KOH-DMSO. Methanol and methanethiol molecules can be incorporated with ease into the first coordination sphere of potassium cation to form methoxide and methanethiolate ions. The possibility of nucleophilic attack of methoxide and methanethiolate ions on acetylene molecule in the first coordination sphere of potassium cation was studied. The model reaction system C₂H₂-CH₃OK-H₂O with one DMSO molecule included explicitly to maintain the “solvate-loosened” [CH₃O]^?...K⁺ ion pair and additional inclusion of solvent effects within the framework of the IEFPCM continuum model is the most preferable for serial calculations.     

Solvent extraction and self-assembly of nanosized aggregates of p-tert-butyl thiacalix[4]arenes tetrasubstituted at the lower rim by tertiary amide groups and monocharged metal cations in the organic phase

New p-tert-butyl thiacalix[4]arenes functionalized with morpholide and pyrrolidide groups at the lower rim in cone, partial cone, and 1,3-alternate conformations were synthesized, and their receptor properties for monocharged cations (alkali metal and silver ions) were studied using the picrate extraction method and dynamic light scattering (DLS). To evaluate the ability of the p-tert-butyl thiacalix[4]arene derivatives to recognize metal ions, liquid-liquid extraction of their picrate salts has been carried out in a mutually saturated water-dichloromethane system. The degrees of extraction and the extraction constants for monocharged metal cations (Li⁺, Na⁺, K⁺, Cs⁺) have been determined. The ability of the systems, consisting of host and guest molecules, to self-assembly was proved by DLS using a Zetasizer Nano ZS particle size analyzer. It was shown that all the investigated thiacalix[4]arenes are able to form nanoscale particles with silver cations under the experimental conditions. The pyrrolidide derivative in the cone conformation showed both self-association and aggregation processes with lithium cations. The degree of extraction for all the investigated systems that formed nanoscale aggregates in the organic phase was more than 67% and the extraction constants, log K_ex determined by the picrate extraction method, more than 6.     

Picosecond reversible reaction kinetics of excited p-dimethylaminoacetophenone and m-methyl-p-cyanodimethylaniline studied by oxygen quenching technique

Double fluorescence of p-dimethylacetophenone (DMAPh) in CH₃CN and m-methyl-p-cyanodimethylaniline (MCDMA) in CH₂Cl₂ has been observed and analyzed in terms of reversible excited state isomerisation of the primary excited form b^* to the strongly polar rotamer a^*. Using the oxygen quenching technique, the kinetics of the reactions have been solved and all rate constants separated. The “formal” lifetimes of the species b^*, τ_b ≡ (k_bf + k_bd + k_ba)^?1, are 1 ps and 2.2 ps for DMAPh and MCDMA, respectively. The first value fits well to the reorientation relaxation time of acetonitrile.     

Variation of the ℏω with the particle number and the appearance of “kinks” for atomic clusters

The dependence of the harmonic oscillator (HO) energy level spacing ?ω on the particle number N is studied analytically for atomic (metal) clusters on the basis of their electronic densities, parametrizing Ekardt's results (for sodium clusters) by means of a Fermi distribution. An interesting feature of such an approach is that it leads, under the assumptions made, to “kinks,” that is, to “marked discontinuities in the slope” of ?ω at the closed shells. These discontinuities diminish as N increases. For large N, ?ω becomes simply: ?ω?c₁N^?1/3+c₂N^?1. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Relation between the crystal structures of some salts of the type Me(OCOCH3)2 · nH2O and their ability to form mixed crystals or double salts (Me2+ = Mg,Ca, Mn,Co, Ni,Cu, Zn,Cd)

An attempt is made to find the relation between the crystal structures of some salts of the type Me(OCOCH₃)₂ · nH₂O (Me²⁺ = Mg, Ca, Mn, Co, Ni, Cu, Zn, Cd) and their ability to form mixed crystals or double salts by taking into account the difference in the ground-state configurations of the metal (II) ions. Such a treatment is based on the theoretical argument that the formation of isomorphous and isodimorphous mixed crystals occurs when the admixed ion may assume the coordination environment of the substituted ion in the crystal structure of the host salt. Double salts are formed mainly between the acetates of the d⁵, d¹⁰ and p⁶ metal ions, i.e., for ions that allow strong angular deformations of the coordination polyhedra or when at least one of the metal ions meets this condition so that acetate bridge bonding may occur.     

The first nitrosyl derivatives of high nuclearity carbonyl clusters: Synthesis and X-ray analysis of the [(Ph3P)2N]+ salts of the anions [Os10C(CO)24(μ2-NO)]− and [Os10C(CO)23(NO)]−

The carbido dianion [Os₁₀C(CO)₂₄]^2? reacts with NOBF₄ in MeCN to give [OS₁₀C(CO)₂₄(μ₂-NO)]^? (1) in which the nitrosyl ligand adopts a novel bonding mode bridging the wingtips of a “butterfly” indentation of metal atoms. The anion 1 undergoes rearrangement and CO loss in solution to give [OS₁₀C(CO)₂₃(NO)]^? (2); the overall molecular geometry of 2 is close to that previously found for the dianion [Os₁₀C(CO)₂₄]^2? with the nitrosyl ligand bonded in a terminal fashion to the tetrahedral Os₁₀ metal skeleton. Crystals of the [(Ph₃P)₂N]⁺ salt of 1 are triclinic, space group P$\text{1}$, with a 20.389(4), b 14.670(3), c 12.333(3) Å, α 99.55(3), β 94.43(3), γ 103.03(3)°, Z = 2, refinement of atomic parameters using 2699 absorption corrected data converged at R = 0.0952. The [(Ph₃P)₂N]⁺ salt of 2 crystallises with one molecule of CH₂Cl₂ in the triclinic space group P$\text{1}$, with a 19.374(3), b 16.813(3), c 11.791(2) Å, α 85.00(3), β 101.81(3), γ 99.43(3)°, Z = 2, refinement of atomic parameters using 8736 absorption corrected data converged at R = 0.0943.     

One-pot three-component reaction of C60, amino acid and fluorinated benzaldehyde to C60-pyrrolidine derivatives

A series of fluorinated 2,5-disubstituted C₆₀-pyrrolidine derivatives were synthesized via one-pot three-component reaction of C₆₀, amino acid and fluorinated benzaldehyde under reflux in toluene or microwave irradiation. The cis- and trans-isomers could be isolated by chromatography and fully confirmed by ¹H NMR.