Quantum-chemical study of donor-acceptor interactions in chelate dicarbonyl complexes of rhodium(I)

DFT calculations were used to analyze the electronic structures of 15 mono- and dicarbonyl rhodium(I) complexes with bidentate O,O-, N,N-, and N,O-donor ligands. The characteristics describing the metal-CO bond (bond length and spin-spin coupling constant J(CRh)) were found to depend on which of the donor atoms (N or O) is trans to the carbonyl group. Because of this, the trans-effect transmitted along the σ-bonds can be judged from the values of these characteristics. The characteristics whose values are determined by the populations of the π-antibonding orbitals of the CO groups primarily depend on the cis-partners in the coordination sphere.     

Thermal studies and spectral characterization of the chelate of bis-(η5-cyclopentadienyl titanium(IV) with salicylidene-4-methylaniline

A new chelate (η⁵-C₅H₅)₂Ti(SB)₂, whereSB=O, N donor Schiff base salicylidene-4-methylaniline, was synthesized. The course of thermal degradation of the chelate was studied by thermogravimetric (TG) and differential thermal analysis (DTA) under dynamic conditions of temperature. The order of the thermal decomposition reaction and energy of activation was calculated from TG curve while from DTA curve the change in enthalpy was calculated. Evaluation of the kinetic parameters was performed by Coats-Redfern as well as Piloyan-Novikova methods which gaven=1, ΔH=1.114 kJ·mol^?1, ΔE=27.01 kJ·mol^?1, ΔS=?340.12 kJ·mol^?1·K^?1 andn=1, ΔH=1.114 kJ·mol^?1, ΔE=20.01 kJ·mol^?1, ΔS=?342.60 kJ·mol^?1·K^?1, respectively. The chelate was also characterized on the basis of different spectral studies viz. conductance, molecular weight, IR, UV-visible and¹H NMR, which enabled to propose an octahedral structure to the chelate.     

Geometrical and electronic structure of LaI3 molecule from the gas electron diffraction data and quantum chemical calculations

The saturated vapor over LaI₃ has been studied using the electron diffraction method with mass-spectral monitoring. It was determined that at a temperature 1142(10) K, along with monomer molecules, dimers are present in the vapor in the quantity of 0.7 mol.%. Effective configuration parameters of LaI₃ molecule were obtained: r _g(La-I) 2.961(6) Å, ∠_g(I-La-I) 116.5(9)°, l(La-I) 0.106(1) Å and l(I…I) 0.412(7) Å. A small deviation of the valence angle ∠_g(I-L-I) from 120° can be totally caused by a contraction effect of the distance r _g(I…I) of LaI₃ molecule with planar equilibrium configuration. The electronic structure of LaI₃ molecule was examined by the B3LYP/SDD method. In terms of the NBO-analysis, the participation of lanthanum 4f-AO in bonding orbitals La-I is noted. It is shown that the NBO-analysis describes the bond La-I in LaI₃ molecule as predominantly ionic one with a noticeable covalence component. The energy of the heterolytic bond breakage E(La-I)_het = 1216 kJ/mole was calculated.     

Clean and efficient synthesis of air stable polymer-supported alkoxycarbonylcyclopentadienyl rhodium(I) complexes

Polymer-supported alkoxycarbonylcyclopentadienyl rhodium(I) complexes have been obtained through immobilization of [Rh{C₅H₄CO₂(CH₂)₂O₂C-Im}(NBD)] (2) (Im = imidazole) on an (aminomethyl)polystyrene resin. An alternative approach toward the grafting of [Rh{C₅H₄CO₂(CH₂)₂OH}(NBD)] (1) on a Wang resin has been also developed. Spectroscopic characterization of all the new functionalized resins with particular accent on ICP-OES measurements is presented and discussed.     

Amination of aryl- and vinylacetylenic compounds catalyzed by rhodium(I) complexes

New rhodium-catalyzed amination reactions of arylacetylenes and cyclohexen-1-ylacetylene in the presence of strong bases with the use of carbon dioxide as an auxiliary are described. Secondary amines attack the terminal carbon atom of the triple bond followed by protonation of the adjacent carbon atom. Alternatively, the reaction can proceed further with the addition of the second alkyne molecule. The conditions for the selective synthesis of enamines (up to 87% yield) or α-substituted propynylamines (up to 86% yield) are reported. Dipartimento di Chimica Organica e Industriale dell'Università, Viale delle Scienze, I-43100 Parma, Italia. Dipartimento di Chimica, Università della Calabria, Arcavacata di Rende, I-80036 Cosenza, Italia. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 966–970, May, 1998.     

Interaction of rhodium(i) bisphosphine complexes with semicarbazones to give orthometallated rhodium(iii) complexes

Interaction of the cis-[Rh(PR₃)₂(Solv)₂]PF₆ complexes (R = Ar or R₃ = Ph₂Me, Solv — solvent) under Ar with semicarbazones bearing a phenyl group on the imine-C atom gives the rhodium(iii)-hydrido-bis(phosphine)-orthometallated semicarbazone species [RhH(PR₃)₂{(o-C₆H₄(R")C=N—N(H)CONH₂}]PF₆ (R" = Me or Et), which are characterized generally by elemental analysis, ³¹P{¹H} and ¹H NMR spectroscopy, and mass-spectrometry. The PPh₃-containing complex with R" = Me, structurally characterized by X-ray analysis, reveals coordination of the semicarbazone by the ortho-C atom, the imine-N atom, and the amide-carbonyl group. For a semicarbazone containing no Ph group, the rhodium(i) complex [Rh(PR₃)₂(Et(Me)C=N—N(H)CONH₂)]PF₆, containing the ²-semicarbazone bonded via the imine-N and carbonyl, is formed. Attempts to hydrogenate the C=N moiety in the complexes or to catalytically hydrogenate the semicarbazones were unsuccessful.     

Crystal structure of (acetylacetonato) (dicarbonyl)iridium(I)

The structure of Ir(CO)₂(acac) is determined by XRD at room temperature. Crystallographic data for C₇H₇IrO₄ are: a = 6.4798(5) ?, b = 7.7288(5) ?, c = 9.1629(10) ?, α = 105.738(2)°, β = 90.467(3)°, γ = 100.658(2)°, space group 1, P , V= 433.24(6) ?³, Z = 2, d _calc = 2.662 g/cm³, R = 0.0167. The structure is built of isolated mononuclear molecules. The central iridium atom has a square coordination environment formed by two oxygen atoms that belong to the acetylacetonate ligand and two carbon atoms of carbonyl groups. The average Ir-O and Ir-C bond lengths are 2.045(3) ? and 1.832(6) ? respectively. Molecules are stacked in such a way that the planes of coordination squares turn out to be parallel to the Ir...Ir distances between the nearest neighbors in the stack of 3.242 ? and 3.260 ?. Original Russian Text Copyright ? 2009 by K. V. Zherikova, N. V. Kuratieva, and N. B. Morozova __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 50, No. 3, pp. 595–597, May–June, 2009.     

Photolysis of dicarbonyl(cyclopentadiene)rhodium complexes with a pendent alkyne unit

The syntheses of dicarbonyl[1-(5,5-dimethylhex-3-inyl)-3-phenylcyclopentadienyl]rhodium (7) and its congeners 8 and 9 are reported. Photolysis of 8 and 9 leads to a replacement of one CO ligand by the tethered alkyne unit, yielding 16, and to the dirhodium complexes 17 and 18. The structural assignment of 17 and 18 is based on X-ray studies. The photolysis of 9 leads to 19 and 20.     

Oxidative addition of different electrophiles with rhodium(I) carbonyl complexes of unsymmetrical phosphine–phosphine monoselenide ligands

Dimeric chlorobridge complex [Rh(CO)₂Cl]₂ reacts with two equivalents of a series of unsymmetrical phosphine–phosphine monoselenide ligands, Ph₂P(CH₂)_nP(Se)Ph₂ {n = 1( a ), 2( b ), 3( c ), 4( d )}to form chelate complex [Rh(CO)Cl(P∩Se)] ( 1a ) {P∩Se = η²‐(P,Se) coordinated} and non‐chelate complexes [Rh(CO)₂Cl(P～Se)] ( 1b–d ) {P～Se = η¹‐(P) coordinated}. The complexes 1 undergo oxidative addition reactions with different electrophiles such as CH₃I, C₂H₅I, C₆H₅CH₂Cl and I₂ to produce Rh(III) complexes of the type [Rh(COR)ClX(P∩Se)] {where R = ? C₂H₅ ( 2a ), X = I; R = ? CH₂C₆H₅ ( 3a ), X = Cl}, [Rh(CO)ClI₂(P∩Se)] ( 4a ), [Rh(CO)(COCH₃)ClI(P～Se)] ( 5b–d ), [Rh(CO)(COH₅)ClI‐(P～Se)] ( 6b–d ), [Rh(CO)(COCH₂C₆H₅)Cl₂(P～Se)] ( 7b–d ) and [Rh(CO)ClI₂(P～Se)] ( 8b–d ). The kinetic study of the oxidative addition (OA) reactions of the complexes 1 with CH₃I and C₂H₅I reveals a single stage kinetics. The rate of OA of the complexes varies with the length of the ligand backbone and follows the order 1a > 1b > 1c > 1d . The CH₃I reacts with the different complexes at a rate 10–100 times faster than the C₂H₅I. The catalytic activity of complexes 1b–d for carbonylation of methanol is evaluated and a higher turnover number (TON) is obtained compared with that of the well‐known commercial species [Rh(CO)₂I₂]^?. Copyright © 2006 John Wiley & Sons, Ltd.     

Dicarbonylrhodium(I) complexes of aminophenols and their catalytic carbonylation reaction

The complexes [Rh(CO)₂ClL]( 1 ), where L = 2‐aminophenol ( a ), 3‐aminophenol ( b ) and 4‐aminophenol ( c ), have been synthesized and characterized. The ligands are coordinated to the metal centre through an N‐donor site. The complexes 1 undergo oxidative addition ( OA ) reactions with various alkyl halides ( RX ) like CH₃I, C₂H₅I and C₆H₅CH₂Cl to produce Rh(III) complexes of the type [Rh(CO)(COR)XClL], where R = ? CH₃( 2 ), ? C₂H₅( 3 ), X = I; R = C₆H₅CH₂? and X = Cl ( 4 ). The OA reaction with CH₃I follows a two‐stage kinetics and shows the order of reactivity as 1b > 1c > 1a . The minimum energy structure and Fukui function values of the complexes 1a–1c were calculated theoretically using a DND basis set with the help of Dmol³ program to substantiate the observed local reactivity trend. The catalytic activity of the complexes 1 in carbonylation of methanol, in general, is higher (TON 1189–1456) than the species [Rh(CO)₂I₂]^? (TON 1159). Copyright © 2007 John Wiley & Sons, Ltd.     

Versatile coordination chemistry of rhodium complexes containing the bis(trimethylsilylmethyl)tellane ligand

When RhCl₃ · 3H₂O was treated with an excess of Te(CH₂SiMe₃)_2, a mononuclear mer-[RhCl₃{Te(CH₂SiMe₃)₂}₃] (1) was observed as the main product. By reducing the metal-to-ligand molar ratio, dinuclear [Rh₂(μ-Cl)₂Cl₄{Te(CH₂SiMe₃)₂}₄] (2) was obtained in addition to 1. Further reduction of the metal-to-ligand ratio resulted in the formation of [Rh₂(μ-Cl)₂Cl₄(OHCH₂CH₃){Te(CH₂SiMe₃)₂}₃] (3). The treatment of mer-[RhCl₃(SMePh)₃] (4) with two equivalents of Te(CH₂SiMe₃)₂ affords a mixture of mer-[RhCl₃{Te(CH₂SiMe₃)₂}₃] (1) and mer-[RhCl₃{Te(CH₂SiMe₃)₂}₂(SMePh)] (5). All complexes 1-4 and 5 · ½EtOH were characterized by X-ray crystallography and ¹²⁵Te NMR spectroscopy, where appropriate. The definite assignment of the ¹²⁵Te chemical shifts enabled a plausible discussion of the assignment of some unknown resonances that were observed in the NMR spectra.     

Rhodium(I) and rhodium(III) complexes formed by coordination and C-H activation of bulky functionalized phosphanes

The reaction of [[RhCl(C(8)H(14))(2)](2)] (2) with iPr(2)PCH(2)CH(2)C(6)H(5) (L(1)) led, via the isolated dimer [[RhCl(C(8)H(14))(L(1))](2)] (3), to a mixture of three products 4 a-c, of which the dinuclear complex [[RhCl(L(1))(2)](2)] (4 a) was characterized by Xray crystallography. The mixture of 4a-c reacts with CO, ethene, and phenylacetylene to give the square-planar compounds trans-[RhCl(L)(L(1))(2)] (L=CO (5), C(2)H(4) (6), C=CHPh (9)). The corresponding allenylidene(chloro) complex trans-[RhCl(=C=C=CPh(2))(L(1))(2)] (11), obtained from 4 a-c and HC triple bond CC(OH)Ph(2) via trans-[RhCl[=C=CHC(OH)Ph(2)](L(1))(2)] (10), could be converted stepwise to the related hydroxo, cationic aqua, and cationic acetone derivatives 12-14, respectively. Treatment of 2 and [[RhCl(C(2)H(4))(2)](2)] (7) with two equivalents of tBu(2)PCH(2)CH(2)C(6)H(5) (L(2)) gave the dimers [[RhCl(C(8)H(14))(L(2))](2)] (15) and [[RhCl(C(2)H(4))(L(2))](2)] (16), which both react with L(2) in the molar ratio of 1:2 to afford the five-coordinate aryl(hydrido)rhodium(III) complex [RhHCl(C(6)H(4)CH(2)CH(2)PtBu(2)-kappa(2)C,P)(L(2))] (17) by C-H activation. The course of the reactions of 17 with CO, H(2), PhC triple bond CH, HCl, and AgPF(6), leading to the compounds 19-21, 24, and 25 a, respectively, indicate that the coordinatively unsaturated isomer of 17 with the supposed composition [RhCl(L(2))(2)] is the reactive species. Labeling experiments using D(2), DCl, and PhC triple bond CD support this proposal. With either [Rh(C(8)H(14))(eta(6)-L(2)-kappaP]PF(6) or [Rh(C(2)H(4))(eta(6)-L(n)-kappaP]PF(6) (n=1 and 2) as the starting materials, the corresponding halfsandwich-type complexes 27, 28, and 32 were obtained. The nonchelating counterpart of the dihydrido compound 32 with the composition [RhH(2)(PiPr(3))(eta(6)-C(6)H(6))]PF(6) (35) was prepared stepwise from [Rh(C(2)H(4))(PiPr(3))(eta(6)-C(6)H(6))]PF(6) and H(2) in acetone via the tris(solvato) species [RhH(2)(PiPr(3))(acetone)(3)]PF(6) (34) as intermediate. The synthesis of the bis(chelate) complex [Rh(eta(4)-C(8)H(12))(C(6)H(5)OCH(2)CH(2)PtBu(2)-kappa(2)O,P)]BF(4) (39) is also described. Besides 4 a, the compounds 17, 25 a, and 39 have been characterized by Xray crystal structure analysis.     

Synthesis of catalytically active diene and cyclopentadienyl rhodium halide complexes

1. Download : Download high-res image (96KB)
2. Download : Download full-size image

     

Cationic rhodium(I) complexes containing 4,4′-disubstituted 2,2′-bipyridines: A systematic variation on electron density over the metal centre

A series of [Rh(COD)(X₂-bipy)]BF₄ complexes (COD = 1,5-cyclooctadiene; X₂-bipy = 4,4′-disubstituted 2,2′-bipyridines; X = OCH₃, CH₃, H, Cl or NO₂) has been prepared from [Rh(COD)Cl]₂. The complexes for X = OCH₃, Cl and NO₂ have not been described previously in the literature. All complexes have been characterised by elemental analysis, IR, ¹H NMR and UV-Vis spectrometry. This series of complexes presents a wide variation on electron density over the metal centre with virtually no variation on its steric environment which discloses interesting possibilities for catalytic and electro-catalytic studies. A preliminary evaluation of these complexes on the hydroformylation of camphene and β-pinene showed that under the rather drastic conditions employed the complexes acted as a precursor for [Rh(CO)₃H], which accounts for most of the catalytic activity.     

Interplay between solvent and counteranion stabilization of highly unsaturated rhodium(III) complexes: facile unsaturation-induced dearomatization

Abstraction of the chloride ligand from the PCN-based chloromethylrhodium complex 2 by AgX (X=BF(4)(-), CF(3)SO(3)(-)) or a direct C-C cleavage reaction of the PCN ligand 1 with [(coe)(2)Rh(solv)(n)](+)X(-) (coe=cyclooctene) lead to the formation of the coordinatively unsaturated rhodium(III) complexes 3. Compound 3 a (X=BF(4)(-)) exhibits a unique medium effect; the metal center is stabilized by reversible coordination of the bulky counteranion or solvent as a function of temperature. Reaction of [(PCN)Rh(CH(3))(Cl)] with AgBAr(f) in diethyl ether leads to an apparent rhodium(III) 14-electron complex 4, which is stabilized by reversible, weak coordination of a solvent molecule. This complex coordinates donors as weak as diethyl ether and dichloromethane. Upon substitution of the BF(4)(-) ion in [(PCN)Rh(CH(3))]BF(4) by the noncoordinating BAr(f)(-) ion in a noncoordinating medium, the resulting highly unsaturated intermediate undergoes a 1,2-metal-to-carbon methyl shift, followed by beta-hydrogen elimination, leading to the Rh-stabilized methylene arenium complex 5. This process represents a unique mild, dearomatization of the aromatic system induced by unsaturation.     

Rhodium(I) carbonyl complexes of ether‐phosphine ligands and their reactivity

The reactions of dimeric complex [Rh(CO)₂Cl]₂ with hemilabile ether‐phosphine ligands Ph₂P(CH₂) _nOR [n = 1, R = CH₃ (a); n = 2, R = C₂H₅ (b)] yield cis‐[Rh(CO)₂Cl(P ～ O)] (1) [P ～ O = η ¹‐(P) coordinated]. Halide abstraction reactions of 1 with AgClO₄ produce cis‐[Rh(CO)₂(P ∩ O)]ClO₄ (2) [P ∩ O = η ²‐(P,O)chelated]. Oxidative addition reactions of 1 with CH₃I and I₂ give rhodium(III) complexes [Rh(CO)(COCH₃)ClI(P ∩ O)] (3) and [Rh(CO)ClI₂(P ∩ O)] (4) respectively. The complexes have been characterized by elemental analyses, IR, ¹H, ¹³C and ³¹P NMR spectroscopy. The catalytic activity of 1 for carbonylation of methanol is higher than that of the well‐known [Rh(CO)₂I₂]^? species. Copyright © 2002 John Wiley & Sons, Ltd.     

Mononitrosated and phenylamido substituted chelate linkage isomers of quadridentate Schiff base copper(II) complexes

The nitrosation of monophenylamido substituted quadridentate Schiff base complexes of copper(II) are observed to adopt N-bonded isonitroso coordination whereas the phenylisocyanation of the corresponding mononitrosated quadridentate complexes are found to prefer O-bonded isonitroso coordination.     

Symmetrically bridged bis-N-heterocyclic carbene rhodium (I) complexes and their catalytic application for transfer hydrogenation reaction

Bridged rhodium(I) bis(NHC) complexes of the formula [bis-(NHC)Rh(I)PF₆] (1c-5c) were synthesized and applied as catalysts in the transfer hydrogenation of acetophenone in 2-propanol. The activity of the rhodium(I) complexes largely depends on the nature of the N-substituents and the applied bases. The synthesized compounds were characterized by elemental analysis, ¹H and ¹³C NMR-spectroscopy and mass spectrometry. The structure of complex 2c was exemplary determined by X-ray analysis.     

Synthesis and reactivity of substituted cyclopentadienyl rhodium(I) and (III) complexes

New cyclopentadienyl derivatives of rhodium COD complexes [Cp*=C₅H₄COOCH₂CHCH₂ (1); C₅H₄CH₂CH₂CHCH₂ (2); C₅H(i-C₃H₇)₄ (3)] and carbonyl complex [Cp*=C₅H(i-C₃H₇)₄ (4)] were synthesized from [RhCl(COD)]₂ and [RhCl(CO)₂]₂. 1, 2 and 3 oxidized by iodine gave iodine bridged dimers 5, 6 and 7, respectively. Triphenyl phosphine, carbon monoxide and carbon disulfide molecules broke down the iodine bridged structure easily and produced monomer products Cp*RhI₂L [Cp*=C₅H₄COOCH₂CHCH₂, L=CS₂ (8); L=PPh₃ (9). Cp*=C₅H(i-C₃H₇)₄, L=CO (10)]. All of these new compounds were characterized by elemental analysis, ¹H NMR, IR, UV-Vis and mass spectroscopy. The crystal structure of 1 was solved in the triclinic space group with one molecule in the unit cell, the dimensions of which are a=7.082(9) Å, b=8.392(3) Å, c=13.889(5) Å, α=101.19(3)°, β=99.06(6)°, γ=105.11(5)°, and V=763(1) ų. The crystal structure of 3 was solved in the orthorhombic space group Pn21a with four molecules in the unit cell, the dimensions of which are a=9.748(3) Å, b=16.054(5) Å, and V=2319(1) ų. Least squares refinement leads to values for the conventional R₁ of 0.0251 for 1 and 0.0558 for 3, respectively. Compared to that in 1, a shorter metal-ligand bond length in 3 was observed and this is attributed to the rich electron density on Rh(I) metal center piled up by the C₅H(i-C₃H₇)₄ ligand.