Diastereoselective synthesis of five- and seven-membered rings by [2+2+1], [3+2], [3+2+2], and [4+3] carbocyclization reactions of beta-substituted (alkenyl)(methoxy)carbene complexes with methyl ketone lithium enolates

beta-Substituted alkenylcarbene complexes react with methyl ketone lithium enolates to give different carbocyclization products depending on the structure of the lithium enolate, on the metal of the carbene complex, and on the reaction media. Thus, the reactions of aryl and alkyl methyl ketone lithium enolates with beta-substituted alkenyl chromium and tungsten carbene complexes in diethyl ether afford 1,3-cyclopentanediol derivatives derived from a formal [2+2+1] carbocyclization reaction. However, the lithium enolates of acetone and tungsten complexes furnish formal [3+2+2] carbocyclization products. In the case of alkynyl methyl ketone lithium enolates, competitive formal [2+2+1] and [3+2] carbocyclization reactions occur and 1,3-cyclopentanediol and 3-cyclopentenol derivatives are formed. Conversely, alkenyl methyl ketone lithium enolates react with alkenylcarbene complexes under the same reaction conditions to form 2-cycloheptenone derivatives by a formal [4+3] carbocyclization reaction. Finally, when the reaction was performed in the presence of a coordinating medium, the [3+2] carbocyclization pattern was observed independently of the nature of the methyl ketone lithium enolate used.     

Solvent-controlled diastereoselective synthesis of cyclopentane derivatives by a [3 + 2] cyclization reaction of alpha,beta-disubstituted (alkenyl)(methoxy)carbene complexes with methyl ketone lithium enolates

Reaction of alpha,beta-unsaturated methoxycarbene complexes 1 and 11 with methyl ketone lithium enolates 2 leads to the corresponding five-membered carbocyclic compounds 4 or diast-4 and 12. The influence of the solvent and/or cosolvent (PMDTA), which turned out to be crucial to direct the reaction to 4 or diast-4, is studied, and a tentative mechanism according to these facts is proposed. In addition, the reaction of carbene complex 1a with alkynyl methyl ketone lithium enolates can be directed to the formal [3 + 2] or [4 + 1] cyclization products by a slight variation of the reaction conditions. Finally, consecutive three-component coupling reactions with carbene complex 1a, lithium enolates 2, and aldehydes 18 to give, in a diastereoselective way, hydroxy carbonyl compounds 19 and tricyclic polyethers 20 are presented.     

Easy synthesis of heterocyclic carbene complexes by activation of chalcogenopyrones and benzopyrones to pyrylium salts and subsequent addition of carbanion of methoxy(methyl)pentacarbonyltungsten carbene complex

Methylenechalcogenopyran and benzopyran Fischer carbene complexes are easily obtained from commercially available chalcogenopyrones or benzopyrones and carbanion of methoxy(methyl)carbene tungsten complex. The key of the heterocyclic carbene formation is the activation of the carbonyl group by alkylation with alkyl trifluoromethanesulfonate reagent.     

Density functional theory study of trans-dioxo complexes of iron, ruthenium, and osmium with saturated amine ligands, trans-[M(O)2(NH3)2(NMeH2)2]2+ (M=Fe, Ru, Os), and detection of [Fe(qpy)(O)2]n+ (n=1, 2) by high-resolution ESI mass spectrometry

Density functional theory (DFT) calculations on trans-dioxo metal complexes containing saturated amine ligands, trans-[M(O)2(NH3)2(NMeH2)2]2+ (M=Fe, Ru, Os), were performed with different types of density functionals (DFs): 1) pure generalized gradient approximations (pure GGAs): PW91, BP86, and OLYP; 2) meta-GGAs: VSXC and HCTH407; and 3) hybrid DFs: B3LYP and PBE1PBE. With pure GGAs and meta-GGAs, a singlet d2 ground state for trans-[Fe(O)2(NH3)2(NMeH2)2]2+ was obtained, but a quintet ground state was predicted by the hybrid DFs B3LYP and PBE1PBE. The lowest transition energies in water were calculated to be at lambda approximately 509 and 515 nm in the respective ground-state geometries from PW91 and B3LYP calculations. The nature of this transition is dependent on the DFs used: a ligand-to-metal charge-transfer (LMCT) transition with PW91, but a pi(Fe-O)-->pi*(Fe-O) transition with B3LYP, in which pi and pi* are the bonding and antibonding combinations between the dpi(Fe) and ppi(O(2-)) orbitals. The FeVI/V reduction potential of trans-[Fe(O)2(NH3)2NMeH2)2]2+ was estimated to be +1.30 V versus NHE based on PW91 results. The [Fe(qpy)(O)2](n+) (qpy=2,2':6',2':6',2':6',2'-quinquepyridine; n=1 and 2) ions, tentatively assigned to dioxo iron(V) and dioxo iron(VI), respectively, were detected in the gas phase by high-resolution ESI-MS spectroscopy.     

Nickel(0)-mediated [2+2+1] cyclization reaction of chromium carbene complexes and internal alkynes

Alkyl, aryl, and heteroaryl chromium Fischer carbene complexes undergo Ni(0)-mediated [2+2+1] cyclization reaction with internal unactivated and electron-poor internal alkynes to yield highly substituted cyclopentadienes with complete regioselectivity in most cases. The intramolecular version of this cyclization has been accomplished with 1,8-diphenyl-1,7-octadiyne to produce indene derivatives. This three-component [2+2+1] cyclization represents a very uncommon process in the chemistry of Fischer carbene complexes.     

Rhodium(I)-catalyzed [3+2+2]-cyclization of alkenyl Fischer carbene complexes with methyl buta-2,3-dienoate

A variety of alkenyl chromium Fischer carbene complexes react with methyl buta-2,3-dienoate in the presence of a rhodium catalyst to afford substituted cycloheptene derivatives 7, along with minor amounts of cyclopentene derivatives 6. Through this [3+2+2]-cyclization two allene units and one alkenyl carbene ligand are assembled in a selective manner.     

Total synthesis of antofine using the net [5+5]-cycloaddition of gamma,delta-unsaturated carbene complexes and 2-alkynylphenyl ketones as a key step

A compound containing all of the carbons of the anticancer agent antofine was produced in a single step from the coupling of a gamma,delta-unsaturated carbene complex with a 2-alkynylphenyl ketone derivative. Subsequent conversion to antofine was effected in three steps.     

Rhodium(I)-Catalyzed Bridged [5+2] Cycloaddition of cis-Allene-vinylcyclopropanes to Synthesize the Bicyclo[4.3.1]decane Skeleton

Previously reported was that cis-ene-vinylcyclopropanes (cis-ene-VCPs) underwent Rh-catalyzed [5+2] reaction to give 5,7-fused bicyclic products, where vinylcyclopropane (VCP) acts as five-carbon synthon. Unfortunately, this reaction had very limited scope. Replacing the 2π component of cis-ene-VCPs to allene moiety, the corresponding cis-allene-VCPs did not undergo the expected normal [5+2] cycloaddition to give 5,7-fused bicyclic products. Instead, the challenging bicyclo[4.3.1]decane skeleton was obtained via an unprecedented bridged [5+2] cycloaddition. DFT calculations were applied to understand why this bridged [5+2] reaction is favored over the anticipated but not realized normal [5+2] reaction.     

Rhodium dinaphthocyclooctatetraene complexes: synthesis, characterization and catalytic activity in [5+2] cycloadditions

Rh COT in the act: a Ni(0)-catalyzed [2+2+2+2] cycloaddition provides a high-yielding, scalable synthesis of the ligand dinaphtho[a,e]cyclooctatetraene (dnCOT). dnCOT complexation with Rh(I) gives [Rh(dnCOT)(MeCN)(2)]SbF(6), an excellent catalyst for [5+2] cycloadditions of vinylcyclopropanes and π-systems with impressive functional group compatibility.     

Coordination algorithms control molecular architecture: [CuI4(L2)4]4+ grid complex versus [MII2(L2)2X4]y+ side-by-side complexes (M=Mn,Co, Ni,Zn; X=solvent or anion) and [FeII(L2)3][Cl3FeIIIOFeIIICl3

The synthesis and characterisation of a pyridazine-containing two-armed grid ligand L2 (prepared from one equivalent of 3,6-diformylpyridazine and two equivalents of p-anisidine) and the resulting transition metal (Zn, Cu, Ni, Co, Fe, Mn) complexes (1-9) are reported. Single-crystal X-ray structure determinations revealed that the copper(I) complex had self-assembled as a [2 x 2] grid, [Cu(I) (4)(L2)(4)][PF(6)](4).(CH(3)CN)(H(2)O)(CH(3)CH(2)OCH(2)CH(3))(0.25) (2.(CH(3)CN)(H(2)O)(CH(3)CH(2)OCH(2)CH(3))(0.25)), whereas the [Zn(2)(L2)(2)(CH(3)CN)(2)(H(2)O)(2)][ClO(4)](4).CH(3)CN (1.CH(3)CN), [Ni(II) (2)(L2)(2)(CH(3)CN)(4)][BF(4)](4).(CH(3)CH(2)OCH(2)CH(3))(0.25) (5 a.(CH(3)CH(2)OCH(2)CH(3))(0.25)) and [Co(II) (2)(L2)(2)(H(2)O)(2)(CH(3)CN)(2)][ClO(4)](4).(H(2)O)(CH(3)CN)(0.5) (6 a.(H(2)O)(CH(3)CN)(0.5)) complexes adopt a side-by-side architecture; iron(II) forms a monometallic cation binding three L2 ligands, [Fe(II)(L2)(3)][Fe(III)Cl(3)OCl(3)Fe(III)].CH(3)CN (7.CH(3)CN). A more soluble salt of the cation of 7, the diamagnetic complex [Fe(II)(L2)(3)][BF(4)](2).2 H(2)O (8), was prepared, as well as two derivatives of 2, [Cu(I) (2)(L2)(2)(NCS)(2)].H(2)O (3) and [Cu(I) (2)(L2)(NCS)(2)] (4). The manganese complex, [Mn(II) (2)(L2)(2)Cl(4)].3 H(2)O (9), was not structurally characterised, but is proposed to adopt a side-by-side architecture. Variable temperature magnetic susceptibility studies yielded small negative J values for the side-by-side complexes: J=-21.6 cm(-1) and g=2.17 for S=1 dinickel(II) complex [Ni(II) (2)(L2)(2)(H(2)O)(4)][BF(4)](4) (5 b) (fraction monomer 0.02); J=-7.6 cm(-1) and g=2.44 for S= 3/2 dicobalt(II) complex [Co(II) (2)(L2)(2)(H(2)O)(4)][ClO(4)](4) (6 b) (fraction monomer 0.02); J=-3.2 cm(-1) and g=1.95 for S= 5/2 dimanganese(II) complex 9 (fraction monomer 0.02). The double salt, mixed valent iron complex 7.H(2)O gave J=-75 cm(-1) and g=1.81 for the S= 5/2 diiron(III) anion (fraction monomer=0.025). These parameters are lower than normal for Fe(III)OFe(III) species because of fitting of superimposed monomer and dimer susceptibilities arising from trace impurities. The iron(II) centre in 7.H(2)O is low spin and hence diamagnetic, a fact confirmed by the preparation and characterisation of the simple diamagnetic iron(II) complex 8. M?ssbauer measurements at 77 K confirmed that there are two iron sites in 7.H(2)O, a low-spin iron(II) site and a high-spin diiron(III) site. A full electrochemical investigation was undertaken for complexes 1, 2, 5 b, 6 b and 8 and this showed that multiple redox processes are a feature of all of them.