The sorption isotherms of oleic, linoleic, and linolenic acids from solutions in cyclohexane and heptane on magnetite

The adsorption-desorption isotherms of oleic, linoleic, and linolenic acids from solutions in cyclohexane and heptane on the surface of magnetite were obtained by the equilibrium adsorption method. The adsorption of fatty acids was described in terms of the theory of volume filling of micropores. This theory was used to calculate the limiting adsorption values, characteristic energy, and volume of the pore space. In solutions in cyclohexane, the adsorption-desorption isotherm of oleic acid was situated above the isotherms of linoleic and linolenic acids. The situation was opposite with adsorption from heptane. The conclusion was drawn that the limiting adsorption and characteristic energy values increased from linolenic to oleic acid in adsorption from cyclohexane and decreased from linolenic to oleic acid in adsorption from heptane. The adsorption-desorption isotherms exhibited hystereses. Original Russian Text ? V.V. Korolev, O.V. Balmasova, A.G. Ramazanova, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 6, pp. 1156–1160.     

Adsorption isotherms of linoleic and linolenic acids from solutions in carbon tetrachloride on surfaces of highly dispersed manganese and copper ferrites

A comparative study of adsorption-desorption isotherms of linoleic and linolenic acids from solutions in carbon tetrachloride on surfaces of manganese and copper ferrites is performed by means of equilibrium adsorption. Adsorption isotherms of fatty acids are described in terms of the theory of volume filling of micropores, and the values of the limiting adsorption, the characteristic adsorption energy, and the pore space volume are calculated. It is established that the limiting adsorption values of linoleic and linolenic acids from solutions in carbon tetrachloride on a copper ferrite surface are higher than on a manganese ferrite surface. It is shown that the adsorption-desorption isotherms have a hysteresis loop.     

Limiting partial molar volumes of solutions of oleic, linoleic, and linolenic acids in cyclohexane and benzene

High-precision vibration densimetry was used to measure (with an error of less than 5 × 10^?6 g/cm³) the density of dilute solutions (0≤ x ₂ ≤ 0.01 mole fractions) of oleic, linoleic, and linolenic acids in cyclohexane and benzene at 298.15 K. The limiting $\bar V_2^\infty $ and excess V ₂ ^{E, ∞} partial molar volumes of these C_{18: n} fatty acids in the indicated solvents were calculated. Benzene was demonstrated to selectviely influence the volumetric effects of dissolution (V ₂ ^{E, ∞} ) of the linoleic (n _C=C= 2) and linolenic (n _C=C = 3) polyunsaturated acids.     

Phase equilibrium measurements of ternary systems formed by linoleic and linolenic acids in carbon dioxide/ethanol mixtures

This work reports phase equilibrium measurements for the ternary systems linoleic (acid + CO₂ + ethanol) and (linolenic acid + CO₂ + ethanol). The fatty acids present in the ternary systems were selected based on composition of banana peel oil extracted by supercritical CO₂ at 20 MPa and 313 K. The motivation of this research relies on the fact that these unsaturated fatty acids are recognized to play an important role in lowering blood pressure and serum cholesterol and because they are present in high concentrations in banana peel extract. Besides that, equilibrium data of these compounds are scarce in literature. The phase equilibrium experiments were performed using a high-pressure variable-volume view cell over the temperature range of (303 to 343) K and pressures up to 19 MPa. For both systems, only vapour–liquid phase transitions were visually recorded for all data measured.     

Volume properties of solutions of oleic, linoleic, and linolenic acids in n-hexane and n-heptane at 298.15 K

Densities of solutions of oleic, linoleic, and linolenic acids in n-hexane and n-heptane were measured using a vibrating-tube densimeter at 298.15 K in a concentration range of 0–0.012 molar fractions of solute. The measurement error does not exceed ±5·10⁻⁶ g cm⁻³. The limiting partial molar volumes of fatty acids of the studied series in n-hexane and n-heptane and the excess volume properties of binary mixtures were calculated. On going from oleic to linolenic acid, the number of double bonds (>C=C<) in a solute molecule increases, the hydrocarbon chain length in a solvent molecule decreases, and compactness of the structure packing of the resulting solution increases. This is caused, as a whole, by the enhancement of the n-alkane—acid intermolecular interaction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 643–647, April, 2006.     

Arylhydroxyacetic acids and amino acids derived from ethinylphenols

Conclusions A method of synthesis of arylhydroxyacetic acids and ammo acids derived from ethinylphenols has been developed in view of possible physiological activity of these compounds.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1170–1172, May, 1970.     

Cyclic hydroxamic acids derived from quinazoliue

The action of various acylating agents on 2-aminobenzohydroxamic acid afforded 3-hydroxy-4(3H)quinazolinones (hydroxamic acids) as well as several ethers and esters from them were prepared and their spectroscopic properties analyzed. Secondary amines, as well as one equivalent of alkali, on 2-halomethyl-3-hydroxy-4(3H)quinazolinone lead to the formation of a dimer(XI). In this respect the behaviour of secondary amines is different from that of primary amines. Some new 3-hydroxy-2-4(1H,3H)-quinazolidinediones are described.     

Absorbable biopolymers derived from dimer fatty acids

A new class of aliphatic copolyanhydrides was synthesized from nonlinear hydrophobic dimers (FAD) of erucic acid and sebacic acid which possessed the desired physico-chemical and mechanical properties for use as a carrier for drugs. The polymers were synthesized by melt condensation to yield film-forming polymers with molecular weights of 250,000. The copolymer composition was determined by ¹H-NMR and gravimetric methods. In vitro degradation studies showed that these polymers degrade following a first-order kinetics with a rapid degradation in the first 10 days leaving a residue which is mostly the FAD comonomer. The drug release from the polymer also followed a first-order kinetics which correlates with the degradation process of the polymer. Drugs like carboplatin, methotrexate, tetracycline, and gentamicin were released in vitro for over 2 weeks and in some cases over 6 weeks. In vivo biocompatibility tests in rats and rabbits in the brain, muscle, and subcutaneously, demonstrated their toxicological inertness and biodegradability. The 1 : 1 copolymer of FAD : SA was selected as a carrier for various applications including a gentamicin-releasing implant which is now undergoing human clinical trials for the treatment of osteomyelitis. © 1993 John Wiley & Sons, Inc.     

Biodegradable polymers derived from natural fatty acids

A new class of polyanhydrides synthesized from nonlinear hydrophobic fatty acid esters, based on ricinoleic, maleic acid, and sebacic acid, possessed desired physico-chemical and mechanical properties for use as drug carriers. The polymers were synthesized by melt condensation to yield film-forming polymers with molecular weights exceeding 100,000. Their rate of elimination from rats in the course of about 2 months was faster than that found for similar polyanhydrides previously tested. In vitro studies showed that these polymers underwent rapid degradation in the first 10 days. The drug release followed first-order kinetics, showing a rapid drug release rate in the first 10 days which correlated with the degradation of the polymers. The fatty acid ester monomers underwent in vitro enzymatic degradation to the natural starting acids. Tests in rats demonstrated their toxicological inertness and biodegradability. © 1995 John Wiley & Sons, Inc.     

Adsorption of fatty acids from solutions in organic solvents on the surface of finely dispersed magnetite: 2. Heats of oleic,linoleic, and linolenic acid adsorption from carbon tetrachloride and hexane

Differential and integral heats of oleic, linoleic, and linolenic acid adsorption on the surface of finely dispersed magnetite from solutions in carbon tetrachloride and hexane are measured by the calorimetric method. The thermodynamic parameters of the adsorption for the systems under examination are calculated from the obtained experimental data. It is discovered that, at low concentrations, the volume filling of micropores in the particle aggregates of the adsorbent occurs with the formation of ordered adsorbate structures in the pores. At high concentrations, the fatty acids are adsorbed in mesopores and on the outer surface of the adsorbent. It is shown that, at high concentrations, the key contributions to the integral heat of adsorption are made by the endothermic processes of desolvation of adsorbates and the adsorbent surface, as well as by the competitive adsorption of solvent and fatty acid molecules on the active sites of the adsorbent surface.Translated from Kolloidnyi Zhurnal, Vol. 66, No. 6, 2004, pp. 784–787.Original Russian Text Copyright © 2004 by Korolev, Blinov, Ramazanova.     

Adsorption of fatty acids from solutions in organic solvents on the surface of finely dispersed magnetite: 1. Isotherms of adsorption of oleic,linoleic, and linolenic acid from carbon tetrachloride and hexane

Isotherms of adsorption of oleic, linoleic, and linolenic acids on magnetite from solutions in carbon tetrachloride and hexane are measured. When CCl₄ is used as a solvent, the adsorption values increase in the following order: oleic, linoleic, and linolenic acid. In the case of hexane, the order is opposite. Adsorption isotherms of the fatty acids on aggregated magnetite are described in terms of the theory of volume filling of micropores. It is disclosed that, in the case of CCl₄ , the limiting adsorption values and characteristic energies of the process increase in a series: oleic, linoleic, and linolenic acid, but in the case of hexane, they decrease in the same sequence. Upon the adsorption of fatty acids from solutions in CCl₄ and hexane on finely dispersed magnetite, molecules of the acids and solvents compete for the active sites on the adsorbent surface. The number of double bonds in the molecules of unsaturated fatty acids and the desolvation of both the adsorbent surface and adsorbate molecules substantially affect the adsorption of these acids. The effect of the solvents is most pronounced for the adsorption of oleic acid, decreasing with a rise in the number of double bonds in a fatty acid molecule.Translated from Kolloidnyi Zhurnal, Vol. 66, No. 6, 2004, pp. 779–783.Original Russian Text Copyright © 2004 by Korolev, Ramazanova, Yashkova, Balmasova, Blinov.     

The alkaline substances of the protein derived from legume seeds

Conclusions 1. Substances containing a large amount of hexone bases and containing no tryptophan, which permits them to be assigned to the alkaline proteins of the histone type, have been isolated for the first time from legume seeds at pH 9.0–12.5 by a method developed for the purpose.2. The amino acid composition and some of the properties of these substances have been determined by chromatography.Khimiya Prirodnykh Soedinenii, Vol. 5, No. 2, pp. 102–103, 1969     

New bicyclic organylboronic esters derived from iminodiacetic acids

The reactions of phenylboronic acid or dinethylthexyboronic ester with iminodiacetic- or N-methyliminodiacetic acids lead to high yield to the air-stable bicyclic esters (N-B)phenyl[iminodiacete-O,N]borane (1), (N-B)phenyl[N-methyliminodiacetate-O,N]borane (2), (N-B)thexy[iminodiacetate[O,N]borane (3) and (N-B)thexyl[N-methyliminodiacetate-O,N]borane (4). These are shown by ¹H, ¹¹B and ¹³C NMR spectroscopy to have rigid bicyclic structures of strong intramolecular N-B coordination.     

Products from dehydration of dicarboxylic acids derived from anthranilic acid

Treatment of N-(carboxymethyl)-anthranilic acids 1 with several dehydrating agents, gave the cyclic ortho amides 6, or the 7-membered anhydrides 7. After reaction of N-(carboxymethyl)-anthranilic acid (1a) with acetic anhydride, a diacetylated fused diketopiperazine indole dimer (18) could be isolated. Dehydrations of 2,2'-iminobis-benzoic acid led to the corresponding cyclic ortho amides 23. The dynamic behaviour of some of these compounds, and their precursors, was studied.     

Ionic solid-state dimers and polymers derived from imidazolium dicarboxylic acids

A series of imidazolium dicarboxylic acids have been prepared from the reaction of the 1,3‐bis(carboxymethyl)imidazolium zwitterion with the Brønsted acids HX (X=F, Br, Cl, ClO₄). The structures of these acids have been established in the solid state by single‐crystal X‐ray diffraction, which revealed that the cations and anions form strong hydrogen bonds through O? H???X interactions, leading to the formation of dimeric and polymeric networks. These acids react with elemental zinc and cobalt to form stable polymeric coordination complexes, some of which have also been characterised by X‐ray diffraction.     

Robust antimicrobial compounds and polymers derived from natural resin acids

We report novel robust resin acid-derived antimicrobial agents that exhibit excellent antimicrobial activities against a broad spectrum of bacteria (6 Gram-positive and 7 Gram-negative) with selective lysis of microbial membranes over mammalian membranes. Our results indicate that hydrophobicity and unique structures of resin acids can be determining factors in dictating the antimicrobial activity.     

Dithiocarbamates derived from aspartic and glutamic acids as chelating agents

Dithiocarbamates (dtc's) derived from aspartic (asp) and glutamic (glu) acids have been synthesized and characterized. Their Ba salts are of the general formula Ba₃(dtc–aa)₂, where aa = amino acid. The dithiocarbamates react with Ni^II salts to yield square-planar complexes, [Ni(dtc–aa)₂]. Complexes with Pb^II and Cd^II, with formula [M₃(dtc–aa)₂], are insoluble in water, and for Cd^II a second compound can be isolated in an acidic medium for the glutamic acid derivative, with formula [Cd(dtc–glu)]. Conductivity measurements indicate an appreciable affinity of the dithiocarbamates for these metal ions, with an almost quantitative scavenging ability.     

Mono- and diboronates derived from tridentate ONO ligands and arylboronic acids

The syntheses of eight [4.3.0] heterobicyclic boronates containing a N → B coordinative bond are described. The monomeric compounds were prepared by reaction of arylboronic acids with a tridentate ligand having the ONO donor set of atoms. It was shown that substituents at the para-position of the B-phenyl moiety transmit electronic effects to the CN bond which in turn is polarized by formation of the N → B coordination bond. At the same time, related tridentate ligands were also reacted with 1,4-benzenediboronic acid in order to prepare benzene diboron complexes. The structure of this type of compounds was confirmed by X-ray analysis for one of the derivatives.