可见光敏引发聚合甲基丙烯酸甲酯的动力学研究

本论文用膨胀计法进行了甲基丙烯酸甲酯在氯仿溶液中可见光光敏引发聚合动力学的研究。此光敏引发体系由光敏剂1,3,3-三甲基-2-[5-(1,3,3-三甲基-2-吲哚叉)-1,3-戊二烯]吲哚碘盐(简称NK-529),引发剂邻氯代六芳基双咪唑(简称o-Cl-HABI),氢给体3-巯基-4-甲基-4氢-1,2,4-三氮唑(简称MTA)组成。研究结果表明,此光敏聚合体系的光聚合速率与各组分的动力学方程如下:R_p=K(NK-529)^0.51(HABI)^0.41(MTA)^0.36(MMA)^1.0.     

Reactivity of tri- and tetra-nuclear ethylidyne cyclopentadienylcobalt clusters towards protonic acids

The bis(μ₃-ethylidyne) tricobalt cluster [(CpCo)₃(μ₃-CCH₃)₂] (1b) is protonated by trifluoroacetic acid to give the dicobalt edge-protonated cation [H(CpCo)₃(μ₃-CCH₃)₂]⁺ [lb + H]⁺. Protonation of the μ₃-ethylidyne tetracobalt cluster hydride [H(CpCo)₄(μ₃-CCH₃)] (3) takes place in two consecutive steps. At low temperature [H₂(CpCo)₄(μ₃-CCH₃)]⁺ [3 + H]⁺ is formed first, and is then slowly converted into [H₃(CpCo)₄(μ₃-CCH₃)]²⁺ [3 + 2H]²⁺ by an excess of acid. As judged by the ¹H NMR data and the crystal structure of [3 + X]⁺[(CF₃COO)₂X]⁻ (X = H or D) the endo hydrogens in [3 + H]⁺ and [3 + 2H]²⁺ occupy μ₃-(Co₃) face capping hydridic positions. The cations [1b + H]⁺ and [3 + H]⁺ show hydride fluxionality in solution, which in the case of [3 + H]⁺ can be frozen out on the NMR timescale at low temperature (ΔG ^≠ (203 K) = 40.8 kJ/mol). The structure of [3 + X]⁺ [(CF₃COO)₂X]⁻ (X = H or D) was determined by X-ray crystallography. One of the hydrides/deuterides is located on the crystallographic mirror plane, capping a tricobalt face of the cluster cation. The other endo hydrogen atom is believed to be disordered between the other two μ₃-(Co₃) sites, which are related by space group symmetry. Deuteronation of 3 shows a strong normal kinetic deuterium isotope effect. From the temperature independence of the ¹H NMR spectrum of [3 + 2D]²⁺ a non-fluxional solution structure can be inferred. In all the systems studied, hydridic (μ₂- or μ₃-) sites are thermodynamically preferred to possible isomeric agostic CoHC or Co₂HC sites for the endo hydrogens. Agostic interactions cannot, however, be ruled out in transient intermediates during the course of the protonations.     

二苯并噻吩及其氧化物与离子液体相互作用的理论研究

采用密度泛函理论方法比较了DBT/DBTO₂和[BMIM]⁺[PF₆]^-/[BMIM]⁺[BF₄]^-的相互作用。对最稳定的[BMIM]⁺[PF₆]^-、[BMIM]⁺[PF₆]^--DBT、[BMIM]⁺[PF₆]^--DBTO₂、[BMIM]⁺[BF₄]^-、[BMIM]⁺[BF₄]^--DBT、[BMIM]⁺[BF₄]^--DBTO₂进行了NBO和AIM分析。结果表明,DBT和[BMIM]⁺[PF₆]^-/[BMIM]⁺[BF₄]^-中的咪唑环彼此相互平行,NBO和AIM分析表明它们之间发生了π-π相互作用。H1'和H9'形成的F…H氢键有利于π-π堆积作用的形成。DBTO₂倾向于趋近C2-H2和甲基基团形成O…H相互作用;DBTO₂优先吸附在[BMIM]⁺[PF₆]^-/[BMIM]⁺[BF₄]^-。在模拟油中,[BMIM]⁺[PF₆]^-和[BMIM]⁺[BF₄]^-离子液体对DBTO₂的萃取能力大于DBT,其原因是可能是DBTO₂具有较大的极性和O…H与F…H的氢键作用。     

Kinetics of ring-opening polymerization of octamethylcyclotetrasiloxane in microemulsion

Polysiloxane latexes were prepared by microemulsion polymerization of octamethylcyclotetrasiloxane(D4) in the absence of co-emulsifier with octadecyl trimethyl ammonium chloride as a cationic emulsiner and potassium hydrate as an initiator.The particle size was determined by the dynamic light scattering(DLS) technique and the reaction rates of the polymerization were discussed.Furthermore,the kinetics was studied by an initial-rate method,and the effects of the monomer,emulsiner and initiator concentrations and the temperature on polymerization conversions were investigated.From the kinetic results,the rate of polymerization,R_p at 80 ℃ can be expressed as R_p = k[D4]~(0.79)[OTAC]~(0.64)[KOH]~(0.38) and the apparent activation energy(E_a),which was determined by half-period method,is 95.32 kJ mol~(-1).     

电荷转移聚合——酚噻嗪及其衍生物引发丙烯腈光聚合

电荷转移引发的聚合近年来受到人们的广泛注意,许多电子给体,如芳香族的胺、醚、硫醚以及含氮芳杂环化合物,都可引发丙烯腈、甲基丙烯酸甲酯等负性单体光聚合,研究表明,其聚合都是通过电荷转移机制引发的^[1-3]。     

电荷转移引发聚合——酚噻嗪引发丙烯腈光聚合研究

本文研究了酚噻嗪(PTZ)引发丙烯腈(AN)的光聚合。测定了聚合速率R_p=K[AN]^1.47[PTZ]^0.41及活化能E_α=7.1千卡/摩尔。从PTZ与AN在光照下形成激基复合物的机制讨论了引发聚合机理。     

Characterization of antibodies against benzo[a]pyrene with thermodynamic and kinetic constants

Antibodies of a polyclonal antiserum against benzo[a]pyrene were characterized by determining thermodynamic and kinetic constants of the antigen–antibody reaction. Label-free binding assays with optical detection based on reflectometric interference spectroscopy were performed to determine these constants. Different evaluation methods for kinetic measurements were compared. Also, cross-reactivity against two other polycyclic aromatic hydrocarbons, chrysene and pyrene, was checked. The affinity constant between the antibodies and benzo[a]pyrene in homogeneous phase was determined to be K=(5.3±0.3)×10⁷ M⁻¹ which was in the middle of the usual range of antibody affinities. The association rate constant for the reaction at the surface was determined to be (3.8±0.9)×10⁵ M⁻¹ s⁻¹, the dissociation rate constant as (9.7±0.5)×10⁻³ s⁻¹. Different evaluation methods applied to the kinetic measurements led to the same results. This antiserum would be suitable for the selective determination of benzo[a]pyrene in concentrated samples.     

Isotopic exchange reactions between iron-sulphur-nitrosyl clusters and nitrite

The anion [Fe₄S₃(NO)₇]⁻ undergoes slow exchange with labelled nitrite [¹⁵NO₂]⁻ to yield a product [Fe₄S₃(¹⁴NO)(¹⁵NO)₆]⁻ in which complete isotopic exchange has occurred at the basal Fe(NO)₂ groups, but with no exchange at the apical Fe(NO) group. The neutral Fe₄S₄(NO)₄ reacts rapidly with [¹⁵NO₂⁻ to give fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and it is proposed that the conversion proceeds by fragmentation, followed by complete isotopic exchange and rapid reassembly. The binuclear anion [Fe₂S₂(NO)₄]²⁻ also yields, with [¹⁵NO₂]²⁻ in CD₂Cl₂ solution, the fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and a mechanism involving successive fragmentation, exchange and reassembly steps is proposed; however in aqueous solution, a clean exchange reaction occurs to give [Fe₂S₂(¹⁵NO)₄]²⁻. Neutral binuclear esters Fe₂(SR)₂(NO)₄ (R = Me, Et, or Ph) with [¹⁴NO₂]⁻ yield the mononuclear paramagnetic [Fe(¹⁴NO)₂(¹⁴NO₂)₂]⁻, and with [¹⁵NO₂]⁻ the analogous [Fe(¹⁵NO)₂(₁₅NO₂)₂]⁻.     

Reactions of 3,10-epoxycyclo[10.2.2.0.0]hexadeca-4,6,8,13-tetraene: a new intramolecular 1,5-oxygen migration

Bromination of 3,10-epoxycyclo[10.2.2.0^2,11.0^4,9]hexadeca-4,6,8,13-tetraene gave 13-bromo-11-oxapentacyclo[8.7.0.0^2,4.0^12,17]heptadeca-4,6,8-triene-3-ol, 12-bromo-1,2,3,4-tetrahydro-1,4-ethano-antracen-11-ol, 13-hydroxy-3,14-dibromotetracyclo[10.2.2.0^2,11.0^4,9]hexadeca-2,4,6,8,10-pentaene, and 13-hydroxy-3,10,14-tribromotetracyclo[10.2.2.0^2,11.0^4,9]hexadeca-2,4,6,8,10-pentaene by cleavage of the carbon–oxygen bonds and intramolecular 1,5-migration of the oxygen atom of 1,4-epoxide. Reactions of epoxide 14,18-dioxahexacyclo[10.3.2.1^3,10.0^2,11.0^4,9.0^13,15]octadeca-4,6,8-triene obtained from 3,10-epoxycyclo[10.2.2.0^2,11.0^4,9]hexadeca-4,6,8,13-tetraene gave also similar products, in acidic media. Compound 3,10-epoxycyclo[10.2.2.0^2,11.0^4,9]hexadeca-4,6,8,13-tetraene was converted into tetracyclo[10.2.2.0^2,11.0^4,9]hexadeca-2(11),3,9-triene in two ways. The reactions, especially intramolecular oxygen migration, are discussed.     

Reactions of transition-metal carbonyls with anhydrous HF

The reactions of a wide range of transition-metal carbonyls with anhydrous HF are described. In particular, Ru₃(CO)₁₂, Os₃(CO)₁₂ and Ir₄(CO)₁₂ give the solution stable [Ru₃(CO)₁₂H]⁺, [Ru(CO)₅H]⁺, [Os₃(CO)₁₂H]⁺, [Os(CO)₅H]⁺ and [Ir₄(CO)₁₂H₂]²⁺ respectively, which have been characterised by a combination of ¹H and ¹³C NMR spectroscopy.     

THE KINETICS OF THE DECOMPOSITION OF CYCLOHEXYL HYDROPEROXIDE IN THE PRESENCE OF VANADYL DIBENZOYLMETHANE

The kinetics of the decomposition of cyclohexyl hydroperoxide(CHHP) in benzene catalyzed by vanadyl dibenzoylmethane[V0(DBM).,] has been studied.It was found that the products of decomposition of CHHP were cyclohexanol and cyclohexanone,which are produced in about equimolar amount,and the product cyclohexanol obviously inhibited the decomposition of CHHP.The kinetics data can be satisfactorily described by the following equation (with [CHHP]0>>[VO(DBM)2]0)R0=kK[CHHP]0[VO(DBM)2]0/(1+k[CHHP]0)This is the kinetic evidence for the formation of a catalyst-hydro-peroxide intermediate.In the equation K is the stability constant of the catalyst-hydroperoxide intermediate complex;k is the rate constant for the decomposition of the complex.The rate constant K at 500℃ may be expressed as follows:k=1.9×108exp(-53.7×103/RT)S-1 with the activation energy Ea=53.7kJ mol-1     

Theoretical study of tricyclo[3,3,1,1]decane, tricyclo[3,3,1,1]decsilane molecules and their halogen derivatives, C10H12X4 and Si10H12X4 (X=F, Cl, Br, I)

The B3LYP/3-21G* ab initio molecular orbital method from the program package was applied to study tricyclo[3,3,1,1^3,7]decane and tricyclo[3,3,1,1^3,7]decsilane molecules and their halogen derivatives (1,3,5,7-tetrahalotricyclo[3,3,1,1^3,7]decane and 1,3,5,7-tetrahalotricyclo[3,3,1,1^3,7]decsilane, C₁₀H₁₂X₄ and Si₁₀H₁₂X₄ respectively). The optimized structures of these compounds were obtained. Ionization potentials, HOMO and LUMO energies, energy gaps, heats of formation, atomization energies and vibration frequencies were calculated. The calculations indicate that these molecules are stable and have T_d symmetry. Tricyclo[3,3,1,1^3,7]decsilane and its halogen derivatives (Si₁₀H₁₂X₄) are found to have higher conductivity than tricyclo[3,3,1,1^3,7]decane and its halogen derivatives (C₁₀H₁₂X₄). 1,3,5,7-Tetrafluorotricyclo[3,3,1,1^3,7]decane (C₁₀H₁₂F₄) and 1,3,5,7-tetrafluorotricyclo[3,3,1,1^3,7]decsilane (Si₁₀H₁₂F₄) were found to be the easiest compounds to form and the most difficult to dissociate of all 1,3,5,7-tetrahalotricyclo[3,3,1,1^3,7]decane and 1,3,5,7-tetrahalotricyclo[3,3,1,1^3,7]decsilane compounds, respectively.     

The reaction of tetrahydridododecacarbonyltetrarhenium(0) with pyridine and some nitrogen-containing bases

The reactions of H₄Re₄(CO)₁₂ with some nitrogen-containing bases L in chloroform at room temperature were investigated. For L = pyridine, γ-picoline and piperidine, two types of products, namely [H₄Re₃(CO)₉L]⁻[LH]⁺ and H₃Re₃(CO)₉L₃, were isolated. When L = -picoline, 4-CN-pyridine, imidazole or 2,4-dimethylimidazole, [H₄Re₃(CO)₉L]⁻[LH]⁺ is the only product with a yield close to 75%. The structure of H₃Re₃(CO)₉L₃ (L = pyridine) (1) and [H₄Re₃(CO)₉L]⁻[LH]⁺ (L = -picoline) (3) were determined by the X-ray diffraction method. For 1, the three rhenium atoms form an equilateral triangle with edge-bridging hydrides. Each rhenium is coordinated by three carbonyl groups and an axial pyridine. The three pyridines are not all on the same side of the triangular plane to reduce the steric repulsion which is obvious from bond angles and distances data. In 3, the three rhenium atoms form an isosceles with two hydride-bridged Re---Re single bonds and an Re---Re double bond bridged by two hydrides. Each rhenium is coordinated by three CO groups, and -picoline is coordinated to rhenium in the axial position.     

A novel entry into a new class of spiroheterocyclic framework: regioselective synthesis of dispiro[oxindole-cyclohexanone]pyrrolidines and dispiro[oxindole-hexahydroindazole]pyrrolidines

2,6-Bis(arylmethylidene)cyclohexanones undergo a regioselective 1,3-dipolar cycloaddition reaction with the azomethine ylide derived from isatin and sarcosine by a decarboxylative route affording a series of 1-N-methyl-spiro[2.3¹]oxindole-spiro[3.2¹¹]6¹¹-arylmethylidenecyclohexanone-4-aryl-pyrrolidines which were further annulated to give a series of novel 1-N-methyl-spiro[2.3¹]oxindole-spiro[3.7¹¹](3¹¹-aryl)Δ^111,711a-hexahydro-2H-indazole-4-aryl-pyrrolidines. The structures of which were established by spectroscopic techniques as well as single crystal X-ray analysis.     

Gezielte Synthese von Kohlenwasserstoff-verbrückten Komplexen. Nucleophile addition von Pentacarbonylrhenat und -manganat an π-gebundene Dien-, Cyclodien-, Trimethylenmethan-, Cycloheptatrienyl- und Alkin-Liganden

Pentacarbonyl-rhenate and -manganate react with the cationic complexes [cpMo(CO)₂(diene)]⁺, [cpMo(CO)₂(cyclopentadiene]⁺, [cpMo(CO)₂(cyclohexadiene)]⁺, [cpMo(CO)₂(trimethylenemethane]⁺, [(OC)₃Mo(η⁷-C₇H₇)]⁺, [cp(OC)-(Ph₃P)Mo(alkyne)]⁺ to give the corresponding heteronuclear hydrocarbon-bridged complexes.     

Das perfluortriazinium-kation als oxidationsmittel in der metallorganischen synthese—ein neuer weg zur darstellung von [Cp2MCl2](M = Mo

The oxidation of Cp₂MCl₂ (M= Mo, W) with perfluortriazinium tetrafluoroborate, [(FCN)₃F]⁺[BF₄]⁻, in the presence of a flouride ion acceptor (BF₃ or PF₅) in SO₂ solution yielded the cationic metallocene complexes [Cp₂MCl ₂]²⁺[BF₄]⁻ or [C_p2MCl₂] ²⁺[BF₄]⁻[PF₆]⁻ (M = Mo, W), respectively. In these reactions, for the first time the perfluortriazinium cation has proved to be easy to handle and a useful oxidizer in organometallic chemistry. The oxidizer strength of three fluorotriazinium cations, [(XCN)₃F]⁺ (X = F, Cl, H), has been computed ab initio (HF/6 − 31 + G) and calibrated on literature data which were obtained by local density functional calculations. It was anchored to its F⁺ zero point by an experimental value for KrF⁺. ab]Die Oxidation von Cp²MCl₂ mit (M = MO, W) Perfluortriaziniumtetrafluoroborat, [(FCN)₃F]⁺[BF₄]⁻, in Anwesenheit eines Fluoridionenakzeptors (BF₃ oder PF₅) führte in SO₂-Lösung zur Bildung der kationischen Metallocen-Komplexe [Cp₂MCl₂₊]²⁺[BF₄]₂⁻ bzw. [Cp₂MCl₂]²⁺[BF₄]⁻ [PF₆]⁻ (M = Mo, W). In diesen Reaktionen konnte erstmals gezeigt werden, daß Perfluortriazinium-Kationen einfach zu handhabende und nützliche Oxidationsmittel im Bereich der metallorganischen Synthese darstellen. Das (Mdationsvermögen von drei Fluorotriazinium-Kationen, [(XCN)₃F]⁺(X = F, Cl, H), wurde ab initio berechnet (HF/6 − 31 + G) und mit Hilfe von Literaturdaten, die mittels local density functional-Berechnungen erhalten und am experimentellen Wert von KrF ⁺ bezüglich des F⁺ Nullpunktes verankert wurden, kalibriert.     

Interaction of heterocyclic thioamides with tellurium(II) and tellurium(IV). Syntheses and crystal structures of bis[2-(2-thioxo-1,3- thiazolidin-3-yl)-4,5-dihydro-1,3- thiazolium]hexabromotellurate(IV) and tris(1- methylimidazole-2-(3H)-thione)tellurium(II) bromide

Reaction of 1,3-thiazolidine-2-thione with tellurium(IV) in hydrobromic acid medium gave the hexabromotellurate, [C₆H₉N₂S₃]₂²⁺[Te^IVBr₆]²⁻ (3). Reaction of 1-methylimidazoline-2-(3H)-thione (L″) with tellurium(IV), in hydrobromic acid medium, gave the mixed-ligand tellurium(II) complex [Te^IIL″₃Br]⁺Br⁻ (4). The structures of [C₆H₉N₂S₃]₂²⁺[Te^IVBr₆]²⁻ (3) and [Te^IIL″₃Br]⁺Br⁻ were determined by single crystal X-ray diffraction methods. In 3 the unit cell contains [TeBr₆]²⁻ anions and two [C₆H₉N₂S₃]⁺ cations. There is no direct bonding between the metal atom and the cations. In the anion only slight angular deviations from the perfect octahedral geometry are observed. The lone pair of electrons on tellurium(IV) is found to be stereochemically inert. In the cation the two five-membered heterocyclic rings adopt different conformations. In complex 4, in the solid state, the planar [Te^IIL″₃Br]⁺ cation and Br⁻ anion are held together by ionic interactions. In the cation, L″ is bonded to the central tellurium atom through the sulphur atom.     

PMBP与中性磷萃取剂对铽(Ⅲ)的协同萃取

本文研究了1-苯基-3-甲基-4-苯甲酰基吡唑啉酮-5(PMBP)与丁基膦酸二丁酯(DBBP)或磷酸三丁酯(TBP)的氯苯溶液在硝酸介质中对铽(Ⅲ)的协同萃取。测得了萃合物的组成及其萃取平衡常数,讨论了萃合物的可能结构式及协同萃取机理。     

Synthese und reaktivität von dienylmetall-verbindungen : XXVII. Ein einfacher weg zur synthese von cyclopentadienylcobalt(III)-dikationen

CpCo(CO)₂ is oxidised by [Cp₂Fe]BF₄ (Cp = C₅H₅) in the presence of neutral ligands L to give the dications [CpCoL₃]²⁺ (L = SMe₂, S(n-C₄H₉)₂, PMe₃, C₅H₅N, MeCN; Me = CH₃). In [CpCo(SMe₂)₃]²⁺, sulfane ligands are substituted by neutral ligands L, L---L and L---L---L, to give the complexes [CpCoL₃]²⁺ (L = SeMe₂, TeMe₂, PMe₃, P(OMe)₃, AsMe₃, SbMe₃, t-C₄H₉NC, C₅H₅N, MeCN), [Cp-Co(L---L)SMe₂]²⁺ (L---L = R₂P(CH₂)_nPR₂, n = 1, 2, R = C₆H₅; bipyridine, o-phenanthroline, neocuproin) and [CpCo(L---L---L)]²⁺ (L---L---L = RP(CH₂CH₂PR₂)₂, R = C₆H₅). The dications react with iodide resulting in the monocations [CpCoL₂I]⁺ and [CpCo(L---L)I]⁺. Azacobaltocinium cations [CpCo(C₄R₂H₂N)]⁺ (R = H, CH₃) are obtained by reaction of [CpCo(SMe₂)₃]²⁺ with metal pyrrolides.     

Studies on the oxidation of Cu complexes of quadridentate Schiff bases derived from salicylaldehyde or ortho-aminophenol

The oxidation of various [CuL] (where L are the dianions of quadridentate Schiff bases derived from salicylaldehyde, and 1,2-diaminoethane, namely 2,2′-[1,2-ethanediylbis(nitrilomethylidene)diphenatol], salen, its 1,3-propane homologue, saltn, or from glyoxal and ortho-aminphenol, namely 2,2′-[(ethanediimine)diphenato], glyaph, as well as some of their analogues) has been studied by cyclic voltammetry. Anodic sweeps show one, or two, usually irreversible, oxidation peaks originated by the presence of Cu^II, since neither LH₂ nor [ZnL] are oxidized under the same conditions. The oxidations of the 5-NO₂-substituted derivatives are reversible at high scan rate (1 V s⁻¹). The oxidation potentials of the complexes with substituents at the aromatic rings suggest that the electronic influence of such substituents are transmitted to the metal centre via the phenato, rather than the azomethine groups. The glyaph and saltn derivatives are oxidized at potentials higher than the corresponding salen complexes. Electronic and ESR spectroscopy studies on [CuL] samples, oxidized with a H₂O₂/H₅IO₆ mixture, suggest that the initially formed [Cu^IIIL]⁺ rapidly decomposes to Cu^II species, presumably through [Cu(II)0L ·]⁺ intermediates. Some poorly stable complexes of the formula [CuL]HSO₄·2H₂O have been isolated.