Kinetics and mechanisms of diels-alder addition of tetracyanoethylene to anthracene derivatives—II : Solvent effects

The effect of change of solvent on the rate of Diels-Alder addition of tetracyanoethylene (TCNE) to anthracene has been investigated using solvents CCl₄, CHCl₃ and CH₂Cl₂. Solvent effects were measured on the intermediate complex and on the starting materials from solubility measurements. From this, solvent effects on the transition state alone can be evaluated. These effects were remarkable similar to those measured for both the initial state and the intermediate complex suggesting an “early” transition state having a structure similar to that of the intermediate. From the correlation of ΔG_t^≠ (the free energy of transfer from CCl₄ to another solvent for the transition state alone) with the solubility parameter δ², the molar volume of the transition state can be estimated. The result again suggests that the transition state is more “factor” than product-like.     

Solvent effects on hydrogen bond formation

Enthalpies of solution have been used to calculate transfer enthalpies for phenol, pyridine, and DMSO between the solvent cyclohexane and the solvents CCl₄, benzene, and CHCl₃. By use of model compounds, enthalpies due to interactions with phenol, pyridine, and DMSO have been determined. These enthalpies are used to calculate the effect of solvation relative to cyclohexane on hydrogen bonded complexes in CCl₄ and benzene solvents. Correlations with enthalpies due to interactions and frequency shifts for the hydroxyl stretch in these solvents have also been made.     

Solvent effects on the thermodynamics of the formation of hydrogen bonded complexes ofm-cresol III

Thermodynamic parameters for the hydrogen bonded complexes of m-cresol with various bases in the solvent benzene have been determined from calorimetric and spectroscopic data. These data were analyzed by linear solvation energy relationships. When combined with data previously determined for the same complexes in CCl₄ and cyclohexane solvents, it is shown that solvent effects on the thermodynamics of hydrogen bond formation are due to solvation of the free m-cresol and base through dipolar and perhaps donor-acceptor interactions.     

Hybrid QM/MM studies on energetics of malonaldehyde in condensed phase

Energetics of eight enol isomers of a malonaldehyde (MA) at the ground state in CCl₄ solvent environment have been investigated using a hybrid quantum mechanical (QM)/molecular mechanics (MM) method. It is found that relative energies of the isomers slightly change due to interactions between MA and surrounding atoms. In an isolated environment all eight isomers have stable planar structure. On the other hand, most of the isomers have nonplanar structure in CCl₄ whose interactions with the solute molecules are, however, weak. Mainly, structural changes are found in the H? O? C?C dihedral angle ?_{H? O? C?C}, i.e., a hydrogen atom that is connected directly with an oxygen atom, is located at a nonplanar position, and other atoms remain almost planar. Vertical excitation energies of low‐lying excited states at the resultant optimized structure of each isomer are evaluated. The vertical excitation energies in CCl₄ are almost the same as those in the isolated environment, but some changes were found in the triplet excitation states. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Theoretical study of the conformational and electrostatic properties of C4-monosubstituted 2-azetidinones

The conformational preferences and electrostatic properties of 2-azetidinone, 4-(S)-methoxycarbonyl-2-azetidinone and 4-(R)-methyl-2-azetidinone have been studied in gas-phase, aqueous solution and CCl₄ solution using quantum mechanical methods. Gas-phase calculations were performed at the ab initio HF, MP2, and MP4 levels and solvent effects were investigated using a self-consistent reaction-field procedure adapted to the AM1 Hamiltonian. An almost planar arrangement was adopted by the-lactam ring in the three cases, whereas the alkoxycarbonyl side group was found to display a large conformational flexibility. The effects of the different solvents on the electrostatic properties of the three compounds were investigated by following the changes in both molecular electrostatic potentials and induced dipole moments. The resulting electrostatic parameters were used as static reactivity indices to predict the response of the systems to the attack of nucleophilic reagents. Theoretical results were compared with experimental data available on the structure and properties of-lactams. The validity of the method as a predicting tool was critically discussed.     

Linear free energy relations and solvent effects for complexes ofm-cresol and various bases

The enthalpies, entropies, and equilibrium constants for the hydrogen bonded complexes of m-cresol with ten bases in cyclohexane solvent have been determined by calorimetric and spectroscopic methods. The logarithm of the equilibrium constant correlates well with the dipole moment of the base and the solvatochromic parameter which measures the electron donating ability of the base. The enthalpy and entropy data show that the dipole term does not enter into the log K correlation as a consequence of electrostatic interactions between acid and base in the complex. The free base-solvent interaction, which appears to be dipolar in origin, reduces the entropy of the free base and hence contributes to a favorable entropy change for complex formation. The present data are compared to previously reported data obtained in CCl₄ solvent. Solvent effects on the thermodynamic parameters in CCl₄ and cyclohexane appear to be related to dipolar interactions by m-cresol and the bases with the two solvents.     

Molecular fragmentations: Part IV. The mass spectral fragmentation of carbon tetrachloride

MINDO/3 calculations have been made of the molecular structures and energies of seven isomeric forms of the molecular cation (CCl₄)⁺, of the mass spectral fragment pairs:

and also of a number of neutral fragment pairs. Reaction energy profiles have been calculated for two fragmentations of (CCl₄)⁺, into [(CCl₂)⁺ + Cl₂], and into [(CCl₃)⁺ + Cl^?], in the latter of which the reaction proceeds via a rather stable intermediate; for the fragmentation of three electronic states of (CCl₃)⁺ into [(CCl₂)⁺ + Cl^?], where the ground singlet state and first triplet state of (CCl₃⁺ yield the ground doublet state of (CCl₂)⁺, but the first excited singlet of (CCl₃)⁺ yields the first excited doublet of (CCl₂)⁺ ; and for the fragmentation of the ground state of (CCl₃)⁺ into [(CCl)⁺ + Cl₂].     

Solvent effect on the equilibrium constant of the chain reversible reaction of <Emphasis Type="Italic">N,N</Emphasis>′-diphenyl-1,4-benzoquinonediimine with 2,5-dichlorohydroquinone

The temperature dependences of the equilibrium constant K of the reversible chain reaction of N,N′-diphenyl-1,4-benzoquinonediimine with 2,5-dichlorohydroquinone in benzene, chlorobenzene, anisole, benzonitrile, and CCl₄ were studied. The enthalpies and entropies of the reaction in these solvents were determined, and a linear dependence between them in aromatic solvents was found. The equilibrium constant depends on the solvent nature: the replacement of CCl₄ by benzene at T = 298 K increases K from 13.6 to 140. The solvation effects are caused by several types of intermolecular interactions of participants of equilibrium with the medium. The decrease in K in the benzene-anisole-benzonitrile series is related, to a great extent, to complex formation with hydrogen bonding between 2,5-dichlorohydroquinone and the solvents. In anisole a charge-transfer complex is formed between the solvent and reaction product (2,5-dichloroquinone). The constant and enthalpy of the complexation were estimated. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2296–2302, December, 2007.     

Intermolecular interactions of 1-vinyl-1,2,4-triazole in various solvents

The solvent effect on intermolecular interactions of 1-vinyl-1,2,4-triazole was estimated by ¹H NMR spectroscopy. It was shown that 1-vinyl-1,2,4-triazole molecules form homoassociates (molecular stacks) which are broken on dilution with CCl₄. In polar solvents (dimethylacetamide-d ₆, D₂O), monomer-solvent heteroassociates prevail.     

The effect of solvents on the homopolymerization of 4-dimethylaminostyrene initiated with CCl3COOH

In the polymerization of 4-dimethylaminostyrene (DMAS) initiated with CCl₃COOH in solvents possessing different electron-donor and electron-acceptor properties and relative permittivity (c_r), the c_r value of the solvent correlates well with the polymerization rate. The greatest increase of rate of polymerization in the homogeneous system was observed in nitrobenzene. In this solvent, characteristics of the polymerization of DMAS initiated with CCl₃COOH were determined; differences between these characteristics and the rate equation for a similarly initiated polymerization of DMAS in benzene have been elucidated.     

Solvatochromism of the π* ← n transition of acetone by combined quantum mechanical—classical mechanical calculations

The solvent shift of the π* ← n transition of acetone in water, acetonitrile, and tetrachloromethane was calculated in a combined quantum mechanical—classical mechanical approach, using both dielectric continuum and explicit, polarizable molecular solvent models. The explicit modeling of solvent polarizability allows for a separate analysis of electrostatic, induction, and dispersion contributions to the shifts. The calculations confirm the qualitative theories about the mechanisms behind the blue shift in polar solvents and the red shift in nonpolar solvents, the solvation of the ground state due to electrostatic interactions being preferential in the former, and favorable dispersion interaction with the excited state, in the latter case. Good quantitative agreement for the solvent shift between experiment (+1,700, +400, and −350 cm⁻¹ in water, acetonitrile, and tetrachloromethane, respectively) and the explicit solvent model (+1,821, +922, and −381 cm⁻¹) was reached through a modest Monte Carlo sampling of the solvent degrees of freedom. A consistent treatment of the solvent could only be realized in the molecular solvent model. The dielectric-only model needs reparameterization for each solvent. © 1996 John Wiley & Sons, Inc.     

Preparation, characterization and water barrier properties of PS/organo-montmorillonite nanocomposites

Polystyrene/organo-montmorillonite nanocomposites were prepared via solution blending method, using CHCl₃ and CCl₄ as solvents. The clay used was organically modified by hexadecyltrimethyl-ammonium bromide (CTAB) at various surfactant loadings. Intercalated nanocomposite structure was obtained using CHCl₃ as solvent while exfoliated or partially exfoliated was probably the predominated form in the case of CCl₄, as shown by X-ray diffraction measurements. Enhancement in thermal stability and in water barrier properties was observed for PS-nanocomposites compared to that of pristine polymer as indicated by thermogravimetric analysis and water vapor transmission measurements. This increment was more prevalent for nanocomposites prepared with carbon tetrachloride as solvent.     

Large reaction radii for the quenching of fluorescent excited states of liquid cis-decalin and cyclohexane

The large rates of quenching by different solutes of the fluorescent solvent excited state in liquid cis-decalin and cyclohexane as observed by pulse radiolysis are explained by large reaction radii. Values of 14, 13, and 15 Å are found for the quenching of the excited state in cis-decalin by CCl₄, in cyclohexane by CCl₄, and by O₂ respectively.     

Molecular and vibrational structure of the extracellular bacterial signal compound N-butyryl-homoserine lactone (C4-HSL)

The molecular and vibrational structure of the title compound (C4-HSL) was studied by experimental and theoretical methods. The infrared (IR) absorption spectrum was measured in the solid state and in CCl₄ suspension. The observed absorption bands were compared with transitions obtained with B3LYP/cc-pVTZ density functional theory (DFT) calculations. Two stable molecular conformations were predicted, corresponding to an endo- and an exo-conformer with similar energies. Intermolecular amide–amide hydrogen bonding in the crystal state was approximated by a simple cluster model, leading to excellent agreement with the observed solid state IR spectrum. Due to the low solubility of C4-HSL in common solvents for IR spectroscopy, such as CS₂ and CCl₄, a liquid solution spectrum of pure, monomeric C4-HSL was not obtained. However, absorbance peaks observed in oversaturated CCl₄ solution could be assigned to distinct contributions from suspended micro-crystalline aggregates and dissolved monomeric species. The key vibrational bands of the monomeric form of C4-HSL are reported here for the first time: 3425 cm^?1 [ν(N–H)], 1784 cm^?1 [ν(CO), lactone], 1688 cm^?1 [amide I], and 1494 cm^?1 [amide II] (CCl₄).     

Solvent effects on ligand-field intensities in some anionic complexes of 3d ions

Ligand-field spectra of tetrahedral CoX ₄ ^2– and octahedral Cr(NCS) ₆ ^3– were measured in a number of solvents. Care was taken to ensure complete formation of the anionic species to be investigated. Considerable variations in intensity were found for complexes with highly polarizable ligands. For Co(NCS) ₄ ^2– the oscillator strength of the⁴T₁(P) transition in aqueous solution was only about 1/5 that in a number of organic solvents, with little variation in these solvents. For Cr(NCS) ₆ ^3– the intensities are highest in aqueous solution, and some variation is observed for the nonaqueous solvents. These data for the chromium complex correlate at least qualitatively with variations of the excited state lifetimes in these solvents. Nonlinear changes of intensities in solvent mixtures can be taken as an indication of preferential solvation of the anionic complex by nonaqueous solvent molecules. The reported results are a strong indication of large differences in solvent/solute interactions between water and the nonaqueous solvents.     

Molecular Structure and Conformations of Chloral (CCl3CHO) in the Ground and Lowest Triplet States

This paper reports on an ab initio quantum mechanical calculation of the structure of the conformationally nonrigid chloral (CCl₃CHO) molecule in the ground (S₀) and lowest excited triplet (T₁) states. Electronic excitation causes substantial changes in molecular geometry: the CCl₃ top is rotated, and the carbonyl (CCHO) fragment becomes nonplanar. For the torsional (S₀ and T₁) and inversion (T₁) nuclear vibrations, one- (S₀ and T₁) and two-dimensional (T₁) vibrational problems are solved; a relationship is found between the torsional and inversion vibrations in the T₁ state. The results are compared with the data of analogous calculations for the acetaldehyde molecule in the T₁ state.     

Experimental and Theoretical Determination of the Limiting Partial Molar Volume of Indole in CCl<Subscript>4</Subscript>, Tetrahydrofuran and Acetonitrile at 293.15 K: A Comparative Study with Benzimidazole and Benzothiophene

The partial molar volumes of indole(Ind) at infinite dilution (V₂^￥V_{2}^{\infty}) in carbon tetrachloride (CCl₄), acetonitrile (ACN) and tetrahydrofuran (THF) as solvents, were estimated from densitometry measurements at 293.15 K. The results indicate that $V_{2}^{\infty}\mbox{(ACN)}>V_{2}^{\infty}\mbox{(CCl$V_{2}^{\infty}\mbox{(ACN)}>V_{2}^{\infty}\mbox{(CCl $\approx V_{2}^{\infty}\mbox{(THF)}$\approx V_{2}^{\infty}\mbox{(THF)}. The values determined in this study are close to the values calculated from reported density for Ind in the solid state. In order to make a comparison the partial molecular volume of benzimidazole (Bim) and benzothiophene (BT) in solvents with appropriate solubility were measured too, and the results have revealed that $V_{2}^{\infty}\mbox{(BT)}>V_{2}^{\infty}\mbox{(Ind)}$V_{2}^{\infty}\mbox{(BT)}>V_{2}^{\infty}\mbox{(Ind)} in CCl₄ and $V_{2}^{\infty}\mbox{(Ind)}>V_{2}^{\infty}\mbox{(Bim)}$V_{2}^{\infty}\mbox{(Ind)}>V_{2}^{\infty}\mbox{(Bim)} in THF. In this work the role of solvent reorganization around to solute cavity, and specific and nonspecific interactions on the volumetric behavior of these molecules in solution are discussed using the Terasawa-Itsuki-Arakawa model, the Lee-Graziano model, molar volumes of solutes calculated at the DFT-B3LYP/cc-pVTZ and aug-cc-pVTZ level in the gas phase and considering solvent presence with the Onsager’s reaction field, and the van der Waals volume. This analysis suggests that the molecular volumes of solutes are overestimated by the quantum methods employed in this work and that the volumetric contribution from the van der Waals components to the limiting partial molecular volumes of solutes is important, with the exception of Ind in CCl₄ where the solvent reorganization is the dominant factor.     

Unravelling the Reaction Mechanism for the Fast Photocyclisation of 2‐Benzoylpyridine in Aqueous Solvent by Time‐Resolved Spectroscopy and Density Functional Theory Calculations

A combined femtosecond transient absorption (fs‐TA) and nanosecond time‐resolved resonance Raman (ns‐TR³) spectroscopic investigation of the photoreaction of 2‐benzoylpyridine (2‐BPy) in acetonitrile and neutral, basic and acidic aqueous solvents is reported. fs‐TA results showed that the nπ* triplet 2‐BPy is the precursor of the photocyclisation reaction in neutral and basic aqueous solvents. The cis triplet biradical and the cis singlet zwitterionic species produced during the photocyclisation reaction were initially characterised by ns‐TR³ spectroscopy. In addition, a new species was uniquely observed in basic aqueous solvent after the decay of the cis singlet zwitterionic species and this new species was tentatively assigned to the photocyclised radical anion. The ground‐state conformation of 2‐BPy in acidic aqueous solvent is the pyridine nitrogen‐protonated 2‐BPy cation (2‐BPy‐NH⁺) rather than the neutral form of 2‐BPy. After laser photolysis, the singlet excited state (S₁) of 2‐BPy‐NH⁺ is generated and evolves through excited‐state proton transfer (ESPT) and efficient intersystem crossing (ISC) processes to the triplet exited state (T₁) of the carbonyl oxygen‐protonated 2‐BPy cation (2‐BPy‐OH⁺) and then photocyclises with the lone pair of the nitrogen atom in the heterocyclic ring. Cyclisation reactions take place both in neutral/basic and acidic aqueous solvents, but the photocyclisation mechanisms in these different aqueous solvents are very different. This is likely due to the different conformation of the precursor and the influence of hydrogen‐bonding of the solvent on the reactions.     

Solvent effects on the electronic spectral characteristics of carbazone

The electronic spectra of carbazone in a number of organic solvents of different properties have been examined. It is deduced that in dilute solutions of basic solvents, carbazone (H₂L) exists in acid—base equilibrium (H₂L ⇋ HL⁻ + H⁺). The proportional concentration of the base form (HL⁻) in a medium is largely dependent on the carbazone concentration, basicity of the organic solvent and the tendency of stabilization of the HL⁻ form through H-bond interaction with protic solvent molecules. The observed absorption bands belonging to absorption of both H₂L and HL⁻ forms are assigned to a transition involving the whole solute associated with intramolecular CT transition. The longer wavelength band appearing in the spectra of the H₂L form in the weak basic solvents (acetonitrile, acetone, dioxane and CCl₄) is suggested to be due to absorption of the solvated polar complex resulting from interaction of solvent polarity with the polar solute carbonyl group.     

The effect of polymer side chains on vapor sorption in polyacrylate and polymethacrylate solutions

The segment fraction Ψ₁ activity coefficients, a₁/Ψ₁, of solvents have been determined by the piezoelectric sorption method for 0.1 ≤ Ψ₁ ≤ 0.5 in binary solutions of chlorinated methanes [carbon tetrachloride (CCl₄), chloroform (CHCl₃), and dichloromethane (CH₂Cl₂)] with aromatic hydrocarbons (benzene and toluene) in poly(methyl methacrylate), poly(methyl acrylate), poly(ethyl methacrylate), and poly(n-butyl acrylate) at 23.5°C. The present results for toluene in PMMA agree with previously published values obtained by gas-liquid chromatography. For CCl₄ and the aromatic hydrocarbons, the polymer–solvent interaction parameter χ is positive and constant, while for the polar solvents (CHCl₃ and CH₂Cl₂), χ is negative and increases with increasing Ψ₁. The effect of the polymer side chains on vapor sorption in nonpolar and polar solvent systems is discussed in terms of the χ parameter.