In situ Molecular Self-assembly and Sensitive Label-free Detection of Streptavidin via a Wavelength Interrogated Surface Plasmon Resonance Sensor

The sensing sensitivity of wavelength interrogated surface plasmon resonance（WISPR） biosensor is improved by self-assembly of polyelectrolyte multilayer（PEM） film of poly（allylamine hydrochloride）（PAH）/ poly（sodium-p-styrenesulfonate）（PSS） on the Au film coated glass chip via the layer-by-layer（LBL） technique. The home-made WISPR with Krestchmann configuration consists of a tungsten-halogen lamp as a photon source and a charge coupled device（CCD） camera as the detector. The influence of PEM film thickness on the optical properties of WISPR biosensors was investigated theoretically and experimentally. In order to achieve higher sensing sensitivity, the PEM film thickness has to be designed as ca.14 nm at an Au layer thickness of 50 nm and an incidental angle of 11.8°. Furthermore, the PEM coated WISPR biosensor can serve as highly sensitive biosensor, in which the biotin-streptavidin is used as bioconjugate pair. After deposition of the PEM film of （biotin/PAH）（PSS/PAH）3, the modified WISPR biosensor is more sensitive to the low concentration（〈0.01 mg/mL） of streptavidin. And the sensing sensitivity can be further increased by one order of magnitude compared with that of the biotin/PAH coated WISPR biosensor. Thus, such low-cost, high-performance and efficient PEM-coated WISPR biosensors have great potentials in a diverse array of fields such as medical diagnostics, drug screening, food safety analysis, environmental monitoring, and homeland security.     

Detection of H_2O_2 at a composite film modified electrode with highly dispersed Ag nanoparticles in Nafion

Ag nanoparticles were prepared by using the ion-exchange of Nafion combined with electrochemical reduction on the electrode. Ag nanoparticles are highly dispersed in Nafion film with an average size of 4.0±0.2 nm.The amount of Ag nanoparticles can be readily controlled by the amount of Nafion coated on the electrode.Thus obtained Ag nanoparticles exhibit good catalytic activity for the reduction of H₂O₂ with a linear response to H₂O₂ in the concentration range of 0.04-8.0 mmol/L with a sensitivity of 0.34μA/mmol/L and a detection limit of 1.0×10^-8 mol/L.     

Preparation and Properties of Imidazole-containing Polyimide/Silica Hybrid Films

Imidazole-containing polyimide/silica（PI/SiO2） hybrid films were prepared from 3,3＇,4,4＇-biphenyltetra- carboxylic dianhydride（BPDA） and 2,2＇-di（p-aminophenyl）-5,5＇-bibenzimidazole in N,N-dimethylacetamide（DMAc） by sol-gel method and thermal imidization. The hybrid film with high silica mass fraction up to 40% was transparent. Scanning electron microscope（SEM） and transmission electron microscope（TEM） results of the film indicate a ho- mogeneous dispersion of silica nanoparticles in the polyimide matrix. One hybrid film PI/SiO2 with 15% SiO2 exhi- bits better mechanical properties with a tensile strength of 222 MPa, an elongation at break of 12%, and a tensile modulus of 5.66 GPa. The reinforced mechanism on mechanical Drooerties was also studied.     

Electrochemiluminescence of metal-organic complex nanowires based on graphene-Nafion modified electrode for biosensing application

In this work, we chose tris(2,2′-bipyridyl)ruthenium(II)hexafluorophosphate(Ru(bpy)3(PF6)2), a metal-organic complex material,to prepare nanowires, which were subsequently applied for the construction of electrochemiluminescence(ECL) biosensor by immobilizing them onto a glassy carbon electrode(GCE) with graphene-Nafion composite films. The graphene therein, being a two-dimensional carbon nanomaterial with outstanding electronic properties, can obviously improve the conductivity of the Nafion film, as well as enhance the electrochemical signal and ECL intensity of the Ru(bpy)3(PF6)2 nanowires(RuNWs) at low graphene concentration. The developed biosensor exhibited excellent ECL stability with tripropylamine(TPrA) as co-reactant. The ECL biosensor exhibited high sensitive ECL response in a wide linear range and low detection limit for the detection of proline. It is considered that the oxidation products of proline would be responsible for the ECL enhancement. The large electro-active area of the nanowires and the enhancement effect of the graphene played critical roles in the high detection performance of the ECL biosensor. The results demonstrated herein may provide a useful enlightenment for the design of more sensitive ECL biosensors.     

Fabrication of NiO coated SiO2 and SiO2 coated NiO for the removal of Pb2＋ ions

We have prepared silica,SiO2coated NiO and NiO coated SiO2by sol-gel method.The physicochemical properties of the desired materials were investigated by surface charge properties,scanning electron microscopy（SEM）,energy dispersive X-ray（EDX） spectroscopy,surface area measurements and X-ray diffraction（XRD） analyses.The point of zero charge（PZC） of the solid was determined by the salt addition method.In coated materials,two PZC values were noted representing the surface charge of their counterparts.The SEM image of SiO2coated NiO displays a uniform coating of silica on the surface of NiO whereas in case of NiO coated SiO2,a honeycomb like appearance was observed with highly porous structures.In the diffractograms of NiO,the characteristic peaks were suppressed in NiO coated silica however,no diffraction peak could be seen in SiO2coated NiO.Batch adsorption technique was applied for the removal of Pb2＋ions from aqueous solution.The sorption trend for Pb2＋ions was observed in the order of NiO coated SiO2〉 SiO2coated NiO 〉 NiO 〉 SiO2.This trend confirms that the coated materials have more sorption capacities than their parent counterparts.     

Synthesis of micron-sized hollow silica spheres with a novel mesoporous shell of MCF

Micron-sized hollow silica spheres whose shells are made up of mesocellular silica foams(MCFs) have been synthesized by one-pot sol-gel method in benzene/water/P123 emulsion.The material is characterized with SEM,TEM,BET and ~(29)Si MAS NMR. The results show that the MCFs of the unique shell of hollow silica spheres were connected by large windows with a narrow distribution of～10 nm in diameter,the inner space of the hollow sphere is accessible.And the formation mechanism of the hollow silica spheres is ...     

Capillary Column Coated with Heptakis（2,3,6-tri-O-octyl）-β-cyclodextrin Using Sol-gel Technology

Heptakis(2,3,6-tri-O-octyl)-β-cyclodextrin was coated onto the fused silica capillary by sol-gel technology.Column efficiency and column selectivity were studied.The results indicated that high ability of separation was acquired.Positional isomers of aromatic compounds were well separated.     

Preparation of Silver Nanoshells on Silica Particles by a Simple Two-step Process

A simple two-step method was developed to prepare silver nanoshells coated on silica paticles. The method involves two steps: concentration of reaction precursor (AgNO3) on particle surfaces and subsequent reduction by formaldehyde. The obtained composite particles were characterized by TEM, ED, and SEM-EDS measurements. The results show that the silver nanoshell is coated on silica particle surface in the form of a polycrystalline (cubic structure) layer with average thickness of 20 nm and weight percentage of 1.9%.     

Amperometric Hydrogen Peroxide Biosensor Based on Multiwall Carbon Nanotubes and Cadmium Sulfide Quantum Dots

<正>A novel third-generation hydrogen peroxide(H_2O_2) biosensor(Hb/CdS/MWNTs/GCE) was fabricated through hemoglobin(Hb) adsorbed onto the mercaptoacetic acid modified CdS QDs/carboxyl multiwall carbon nanotubes'(MWNTs) films.Cyclic voltammogram of Hb/CdS/MWNTs/GCE showed a pair of well-defined and quasi-reversible redox peaks with a formal potential(E~0) of-0.230 V(vs.Ag/AgCl) in 0.1 mol/L pH=8.0 phosphate buffer solution(PBS),which was the characteristic of the Hb heme Fe(Ⅲ)/Fe(Ⅱ) redox couple.The biosensor shows an excellent electrocatalytic activity to the reduction of H_2O_2.The response time of the designed biosensor to H_2O_2 at a potential of -0.30 V was less than 2 s and linear relationships were obtained in the concentration ranges of 2.0×10~(-6)—2.7×10~(-3) mol/L and 2.7×10~(-3)—7.7×10~(-3) mol/L with a detection limit of 3.0×10~(-7)mol/L(S/N=3).The apparent Michaelis-Menten constant K_m was estimated to be 1.324 mmol/L that illustrated the excellent biological activity of the fixed Hb.     

Multianalyte Biosensors for the Simultaneous Determination of Glucose and Galactose Based on Thin Film Electrodes

A multianalyte biosensor for the simultaneous determination of glucose and galactose was developed by immobilizing glucose oxidase (GOD) and galactose oxidase (GAO) on Nation-modified thin film platinum disk electrodes. The dual Pt working electrodes with disk shape and the surrounding ring shaped counter electrode were fabricated by thin film technology,which were integrated onto the same microchip. The response of the designed biosensor for glucose and galactose were linear up to 6.0mmol/L and 3.5mmol/L with sensitivities of 0.3μA/mmol/L and 0.12μA/mmol/L, respectively. No cross-talking effect was observed.     

基于聚亚甲基蓝-碳纳米管复合膜固载血红蛋白的H2O2生物传感器

采用吸附和电化学聚合修饰方法,制得了聚亚甲基蓝-碳纳米管聚合膜玻碳电极(PMB-MWNTs/GCE),再将血红蛋白(Hb)固定在PMB-MwNTs/GCE表面,制备了稳定的Hb/PMB-MwNTs//GCE的H2O2生物传感器,并用循环伏安法对修饰电极的生物电催化行为进行了表征.研究结果表明,固定在PMB-MWNTs/...     

Brewster angle microscopic study of mixed lipid-protein monolayer at the air-water interface and its application in biosensing

This study investigated lipid-protein LB film formation with Brewster angle microscopy. Our experimental results show that hemoglobin (Hb) molecules can enter the lipid layer and remain for an extended time. We investigated the KCl effect on the LB monolayer of lipid-protein. The lipid-Hb monolayer was transferred from the air-water interface to a QCM gold electrode. UV-vis spectra showed that Hb retained its natural structure in the lipid layer. Cyclic voltammetric (CV) and amperometric systems were applied in this study in order to confirm the remaining bioactivity and sensitivity of Hb to hydrogen peroxide (H(2)O(2)). Lipid-Hb-modified electrodes showed well-defined redox peaks, indicating that the direct electron transfer between Hb and the electrode was enhanced by Hb incorporated in lipid layer. Based on this phenomenon, a novel biosensor for H(2)O(2) was designed. Experimental conditions influencing the biosensor performance such as pH, and potential were optimized and assessed. The levels of the R.S.D.'s (<5%) for the entire analyses reflected the highly reproducible sensor performance. Using optimized conditions the linear range for the detection of H(2)O(2) was observed from 1 x 10(-6) to 1.00 x 10(-4) molL(-1) with a detection limit of 4.00 x 10(-7) molL(-1) (based on the S/N=3).     

A high-sensitive amperometric hydrogen peroxide biosensor based on the immobilization of hemoglobin on gold colloid/L-cysteine/gold colloid/nanoparticles Pt-chitosan composite film-modified platinum disk electrode

A hemoglobin (Hb)/gold colloid (nano-Au)/L-cysteine (L-cys)/nano-Au/nanoparticles Pt (nano-Pt)-chitosan (CHIT) composite film-modified platinum disk electrode (abbreviated to modified electrode) has been prepared to construct a biosensor for determination of H(2)O(2). The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The modified process was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The morphologies of different composite film were investigated with scanning electron microscopy (SEM) and the element of composite film was investigated with X-ray photoelectron spectroscopy (XPS). Analytical parameters such as pH and temperature were also studied. The linear range for the determination of H(2)O(2) is 1.4 x 10(-7) to 6.6 x 10(-3)mol/L with a detection limit of 4.5 x 10(-8)mol/L (S/N=3). The sensor achieved 95% of the steady-state current within 10s. The sensor exhibited high sensitivity (17.62 microA/(mmol L)), selectivity and stability. The method is applied to the determination of H(2)O(2) with satisfactory results.     

Amperometric biosensor for hydrogen peroxide based on direct electrocatalysis by hemoglobin immobilized on gold nanoparticles/1,6-diaminohexane modified glassy carbon electrode.

A facile strategy of an amperometric biosensor for hydrogen peroxide based on the direct electrocatalysis of hemoglobin (Hb) immobilized on gold nanoparticles (GNPs)/1,6-diaminohexane (DAH) modified glassy carbon electrode (GCE) has been described. A uniform monolayer film of DAH was initially covalently bound on a GCE surface by virtue of the electrooxidation of one amino group of DAH, and another amino group was modified with GNPs and Hb, successively. The fabrication process was characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). The proposed biosensor exhibited an effective and fast catalytic response to the reduction of H2O2 with good reproducibility and stability. A linear relationship existed between the catalytic current and the H2O2 concentration in the range of 1.5x10(-6) to 2.1x10(-3) M with a correlation coefficient of 0.998 (n=24). The detection limit (S/N=3) was 8.8x10(-7) M.     

Liquid phase deposition of hemoglobin/SDS/TiO2 hybrid film preserving photoelectrochemical activity

This work demonstrates that liquid phase deposition (LPD) technique provides a novel approach to the immobilization of hemoglobin (Hb) in TiO(2) film for studying the direct electron transfer of Hb. Using the LPD process, a hybrid film composed of Hb, TiO(2) and sodium dodecylsulfonate (SDS) is successfully prepared on the electrode surface. The surface morphology of as-deposited Hb/SDS/TiO(2) film shows a flower-like structure. The cyclic voltammetric measurement indicates that the LPD hybrid film facilitates the electron transfer of Hb, which yields a pair of redox peaks prior to the characteristic voltammetric peaks of TiO(2). Due to the electrocatalytic activity of Hb towards H(2)O(2), the Hb/SDS/TiO(2) hybrid LPD film can be utilized as an H(2)O(2) sensor, showing a sensitive response linearly proportional to the concentration of H(2)O(2) in the range of 5.0×10(-7)-4.0×10(-5) mol/L. At the same time, the Hb/SDS/TiO(2) hybrid film preserves the photoelectrochemical activity of TiO(2). The photovoltaic effect on the electrochemical behavior of Hb/SDS/TiO(2) film is observed after long-time UV irradiation on the film, which could improve the calibration sensitivity for H(2)O(2).     

Direct Electrochemistry of Hemoglobin Immobilized on Carbon‐Coated Iron Nanoparticles for Amperometric Detection of Hydrogen Peroxide

A novel method for preparation of hydrogen peroxide biosensor was presented based on immobilization of hemoglobin (Hb) on carbon‐coated iron nanoparticles (CIN). CIN was firstly dispersed in a chitosan solution and cast onto a glassy carbon electrode to form a CIN/chitosan composite film modified electrode. Hb was then immobilized onto the composite film with the cross‐linking of glutaraldehyde. The immobilized Hb displayed a pair of stable and quasireversible redox peaks and excellent electrocatalytic reduction of hydrogen peroxide (H₂O₂), which leading to an unmediated biosensor for H₂O₂. The electrocatalytic response exhibited a linear dependence on H₂O₂ concentration in a wide range from 3.1 μM to 4.0 mM with a detection limit of 1.2 μM (S/N=3). The designed biosensor exhibited acceptable stability, long‐term life and good reproducibility.     

Tetraethylorthosilicate film modified with protein to fabricate cholesterol biosensor

Sol-gel derived tetraethylorthosilicate (TEOS) films were prepared by spin coating method on indium tin oxide (ITO) coated glass plate. Hydrophobic interaction method was used to coat the bovine serum albumin film over the surface of tetraethylorthosilicate sol-gel film to minimize cracking, biofouling and to improve the stability of the film. Cholesterol oxidase (ChOx) and horseradish peroxidase (HRP) were immobilized using covalent linkage with bovine albumin serum film to enhance the loading of the enzyme to improve the sensitivity of biosensor. Further ITO-TEOS-BSA-ChOx/HRP film was characterized by UV-vis, FTIR and SEM techniques. The optical response of the ITO-TEOS-BSA-ChOx/HRP biosensor was found to be linear in the range of 2-8 mM for cholesterol concentration with response time approximately 20 s. Amperometric response of ITO-TEOS-BSA-ChOx/HRP was observed to be linear in the range of 2-12 mM of cholesterol concentration with 10-s response time. Michaelis-Menten constant was calculated 21.2 mM .The shelf life of ITO-TEOS-BSA-ChOx/HRP biosensor was approximately about 8 weeks in desiccated conditions at room temperature.     

溶胶-凝胶血红蛋白电化学传感器的研制

运用溶胶-凝胶技术将血红蛋白(Hb)固载于玻碳电极(GC)表面,制得Hb/Sol-Gel/GC修饰电极,找出了制备Hb/Sol-Gel/GC修饰电极的最佳实验条件,建立了一种测定过氧化氢的新的、灵敏的方法.同时对该电极与过氧化氢的作用机理进行了探讨.     

Amperometric determination of H2O2 at nano-TiO2/DNA/thionin nanocomposite modified electrode

We report electrochemical preparation and characterization of a new biosensor made of nanostructured titanium dioxide (nano-TiO(2)) particles and deoxyribonucleic acid (DNA). Thionin (TN) redox mediator was electrochemically deposited onto DNA/nano-TiO(2) modified glassy carbon electrode (GCE). The X-ray diffraction analysis, atomic force microscope (AFM) and scanning electron microscope (SEM) were used for surface analysis of TN/DNA/nano-TiO(2) film. In neutral buffer solution, TN/DNA/nano-TiO(2)/GCE biosensor exhibited excellent electrocatalytic activity towards the reduction of hydrogen peroxide (H(2)O(2)) and oxygen (O(2)). The biosensor shows excellent analytical performance for amperometric determination of H(2)O(2), at reduced overpotential (-0.2V). The detection limit and liner calibration range were found to be 0.05mM (S/N=3) and 0.05-22.3mM, respectively. In addition, determination of H(2)O(2) in real samples was carried out using the new biosensor with satisfactory results. The TN/DNA/nano-TiO(2)/GCE showed stable and reproducible analytical performance towards the reduction of H(2)O(2). This biosensor can be used as an amperometric biosensor for the determination of H(2)O(2) in real samples.     

Study on the enhancement of catalytic activity for hemoglobin by quinhydrone in poly(o-aminophenol) film

Hemoglobin (Hb) and quinhydrone (QHQ) were incorporated in poly(o-aminophenol) [o-AP, POAP] film by electropolymerization of o-aminophenol in a weak acid solution containing Hb and QHQ. The nonconducting polymer film was found to be nearly rigid by piezoelectric quartz crystal (PQC) impedance. Therefore, the thickness of the Hb-QHQ-POAP film was estimated as about 104 +/- 10 nm by quartz crystal microbalance (QCM). The QHQ mediation effects on the biomacromolecule Hb entrapped in the POAP film were investigated by using cyclic voltammetry, amperometric technique and kinetic study. Cyclic voltammograms showed that the redox peaks in the Hb-QHQ-POAP film are much more reversible than those in the Hb-POAP film. The response current of the Hb-QHQ-POAP film to H(2)O(2) was almost twice than that of the Hb-POAP film. The Michaelis-Menten constant and the activation energy of Hb in the Hb-QHQ-POAP film are 7.47 mM and 13.91 kJ/mol, respectively, both are smaller than that in the Hb-POAP film. These results showed that the immobilized Hb in POAP film exhibited higher catalytic activity to H(2)O(2) due to the mediation of QHQ.