Growth control of single and multi-walled carbon nanotubes by thin film catalyst

Single-walled carbon nanotubes (SWNTs) and multi-walled carbon nanotubes (MWNTs) were synthesized on silicon substrate by the control of catalyst size, hydrocarbon species, and carbon flux through chemical vapor deposition (CVD). Catalysts for SWNTs and MWNTs could be obtained by an agglomeration of sputtered Co–Mo and pure Co thin films, respectively. The addition of Mo in the Co catalyst provides an effective nucleation site for SWNT and the low carbon flux by using methane gas in CVD reaction makes it possible to grow a single-walled structure.     

Studies of bromine modified single-walled carbon nanotubes using photoelectron spectroscopy and density-functional theory

Many applications based on single-walled carbon nanotubes (SWNTs) require chemical modification of carbon nanotube to optimize the functionalities of the device. In this contribution we discuss the properties of SWNTs immersed in a hydrobromic acid (HBr) solution. Changes of atomic and electronic structures of bromine modified SWNTs were investigated using photoelectron spectroscopy (PES). Spectra of SWNTs before and after immersion in the HBr solution exhibit different features. To understand the mechanism of interaction between SWNTs and bromine, we performed density-functional theory calculations to reveal the structural changes, adsorption energy and chemical bonding information of SWNTs interacting with bromine. In addition, based on the Gelius model, from the molecular orbitals (MOs), we calculated ultraviolet photoelectron spectra (UPS) of SWNTs with and without functionalizing and compared them with the experiment. The present study is a first step in the understanding of the functionalization mechanism of carbon nanotubes.     

Pyridine-functionalized single-walled carbon nanotubes as gelators for poly(acrylic acid) hydrogels

Pyridine-functionalized single-walled carbon nanotubes (SWNTs) are prepared from the addition of a pyridine diazonium salt to nanotubes. The location and distribution of the functional groups is determined by atomic force microscopy using electrostatic interactions with gold nanoparticles. The pyridine-functionalized SWNTs are able to act as cross-linkers and hydrogen bond to poly(acrylic acid) to form SWNT hydrogels. The pyridine-functionalized SWNTs are further characterized using Raman, FTIR, UV/vis-NIR, and X-ray photoelectron spectroscopy and thermogravimetric analysis-mass spectrometry.     

Probing the Selectivity of Azomethine Imine Cycloaddition to Single‐Walled Carbon Nanotubes by Resonance Raman Spectroscopy

Selective covalent surface modification of single‐walled carbon nanotubes (SWNTs) is of great importance to various carbon nanotube‐based applications as it might offer an alternative method for enriching metallic and semiconducting nanotubes. Herein, we report on the surface modification of SWNTs through 1,3‐dipolar cycloaddition of 3‐phenyl‐phthalazinium‐1‐olate, which is a stable and reactive azomethine imine. For this reaction, microwave heating was found to be more efficient than conventional and solvent‐free heating. The sensitivity of cycloaddition to the molecular structure of SWNTs was probed using resonance Raman spectroscopy with three different laser excitations. Based on the obtained results, azomethine imine addition to the surface of nanotubes is selective for metallic and large‐diameter semiconducting SWNTs. Thermogravimetric analysis coupled with mass spectrometry showed that fragments released at high temperatures corresponded to the phenylphthalazine group, thus confirming the covalent surface functionalization. Modified SWNTs were further characterized by X‐ray photoelectron and UV/Vis‐NIR spectroscopies.     

Single-walled carbon nanotubes exhibit strong antimicrobial activity

We provide the first direct evidence that highly purified single-walled carbon nanotubes (SWNTs) exhibit strong antimicrobial activity. By using a pristine SWNT with a narrow diameter distribution, we demonstrate that cell membrane damage resulting from direct contact with SWNT aggregates is the likely mechanism leading to bacterial cell death. This finding may be useful in the application of SWNTs as building blocks for antimicrobial materials.     

Controlled growth of single-walled carbon nanotubes by catalytic decomposition of CH4 over Mo/Co/MgO catalysts

It was found that the addition of molybdenum to Co/MgO catalysts could remarkably increase the yield and also improve the quality of single-walled carbon nanotubes (SWNTs) from catalytic decomposition of methane. The generation rate of SWNTs was raised at least 10 times and the formation of amorphous carbon was suppressed. But there is an optimum content of Mo and Co, beyond which multi-walled carbon nanotubes (MWNTs) were formed. In other words, the relative amount of SWNTs and MWNTs could be controlled by the composition of catalysts. The obtained SWNTs showed a very high BET surface area. The promotion role of molybdenum was discussed.     

The radiation degradation of a nanotube-polyimide nanocomposite

The radiation degradation of a nanotube-polyimide nanocomposite was studied. Radiation chemistry was observed that was not present in the unmodified polymer or in the imbedded single-walled carbon nanotubes (SWNTs) themselves. The tensile properties were found to be improved by the addition of SWNTs in the unirradiated materials, and no deterioration in these properties with irradiation was observed. The SWNTs were found to have a detrimental effect on the optical properties however. The transparency of the composite was degraded significantly faster by electron-beam radiation than the neat polymer was. This may make the SWNT/polyimide composites unsuitable for some space applications. Electron Spin Resonance (ESR) measurements determined that the SWNTs interfere with the radical chemistry in the irradiated materials. This could be due to energy dissipation by the SWNT network, preventing the formation of radical species, or alternatively, preferential reaction or termination of radicals by the nanotubes. FT-Raman spectroscopy was found to be a very useful tool for examining SWNTs embedded at low concentrations. It revealed no signs of SWNT degradation up to 10 MGy.     

Preparation and characterization of individual peptide-wrapped single-walled carbon nanotubes

Two challenges for effectively exploiting the remarkable properties of single-walled carbon nanotubes (SWNTs) are the isolation of intact individual nanotubes from the raw material and the assembly of these isolated SWNTs into useful structures. In this study, we present atomic force microscopy (AFM) evidence that we can isolate individual peptide-wrapped SWNTs, possibly connected end-to-end into long fibrillar structures, using an amphiphilic alpha-helical peptide, termed nano-1. Transmission electron microscopy (TEM) and well-resolved absorption spectral features further corroborate nano-1's ability to debundle SWNTs in aqueous solution. Peptide-assisted assembly of SWNT structures, specifically in the form of Y-, X-, and intraloop junctions, was observed in the AFM and TEM images.     

单壁碳纳米管与卤代烷的亲电加成反应

主要考察了以路易斯酸为催化剂,几种卤代烷烃为反应试剂的单壁碳纳米管侧壁的亲电加成反应,并通过傅立叶红外光谱、热失重分析和拉曼光谱验证了实验所得产物。此反应的目的是在单壁碳纳米管的侧壁连上烷基基团以提高其溶解性和分散性,并可使其更好地与聚烯烃相结合从而提高复合材料的性能,因而具有较高的研究和应用价值。     

High-yield synthesis of single-wall carbon nanotubes on MCM41 using catalytic chemical vapor deposition of acetylene

High-quality single-wall carbon nanotubes (SWNTs) with narrow diameter distribution have been grown on Fe/Co-loaded MCM41 by using acetylene as the carbon source within a short reaction period, typically 10 min or less. The optimum temperature for SWNTs synthesis is 850 degrees C. Longer reaction time (i.e., 30 min) favors the formation of multiwall carbon nanotubes (MWNTs) and graphitic carbon. When the reaction time is reduced to less than 10 min, formation of MWNTs and graphitic carbon is greatly suppressed, and high-quality SWNTs dominates the yield. The surface of the as-grown SWNTs is found to be free from amorphous carbon, as observed from high-resolution transmission electron microscope (HRTEM) analysis. Raman spectral data show a G/D ratio above 10, indicating that the as-grown SWNTs have very few defects. Furthermore, radial breathing mode (RBM) analysis reveals that the diameter distribution of the current SWNTs is narrow and ranges from 0.64 to 1.36 nm.     

Remarkable support effect of SWNTs in Pt catalyst for methanol electrooxidation

Carbon nanotubes have been proposed as advanced metal catalyst support for electrocatalysis. In this work, different carbon support materials including single-walled carbon nanotubes (SWNTs), multi-walled carbon nanotubes (MWNTs) and XC-72 carbon black, were compared in terms of their electrochemical properties using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The SWNTs is found to exhibit the highest accessible surface area in electrochemical reactions and the lowest charge transfer resistance at the SWNTs/electrolytes. These carbon materials are then loaded with varying amount of Pt by the electrodeposition technique to prepare carbon supported Pt catalysts. Electrochemical measurements of methanol oxidation reveal that the SWNTs supported Pt catalyst exhibits the highest mass activity (mA/mg-Pt). In comparison with Pt-XC-72 and Pt-MWNTs, the remarkably enhanced electrocatalytic activity of the Pt-SWNTs maybe attributed to a higher dispersion and utilization of the Pt particles, which are directly related to the electrochemical characteristics of SWNTs. The high concentration of oxygen-containing functional groups, high accessible surface area, low charge transfer resistance at the carbon/electrolyte interfaces can be important for the Pt dispersing and strong metal-support interaction in the Pt-SWNTs catalyst.     

Cobalt-filled apoferritin for suspended single-walled carbon nanotube growth with narrow diameter distribution

Cobalt-filled apoferritin (Co-ferritin) was, for the first time, used as a wet catalyst for the synthesis of single-walled carbon nanotubes (SWNTs) with narrow diameter distribution. Co-ferritins were spin-coated and converted to cobalt nanoparticles by calcination. Using chemical vapor deposition, suspended networks of SWNTs were formed on pillar-structured substrates. The suspended SWNTs show narrow tube diameter distribution with a relatively good graphite structure. By virtue of the low diffusion coefficient of cobalt, Co-ferritin might be more useful for narrow diameter SWNTs growth than ferritins, which encase iron particles.     

Immobilizing shortened single-walled carbon nanotubes (SWNTs) on gold using a surface condensation method

We propose a surface condensation method for assembling single-walled carbon nanotubes (SWNTs) on gold. The as-prepared long and randomly tangled SWNTs were cut into short pipes by chemical oxidation, allowing the nanotubes to be terminated by carboxyl functionalities. A surface condensation reaction was then performed by immersing an amino self-assembled monolayer (SAM)-modified gold substrate into the dimethylformamide suspension of carboxylic nanotubes with the aid of dicyclohexylcarbodiimide condensation agent. Raman spectroscopy and atomic force microscopy (AFM) results show that a highly aligned assembly of SWNTs has been formed on gold, with the nanotubes standing on the surface stable enough for a long ultrasonication. In combination with the microcontact printing (muCP) technique, we have fabricated patterned nanotube assemblies using this surface condensation method. Moreover, we found that the "giant" carbon nanotubes tend to form bundles on an amino-terminating surface, likely following a nucleation-growth model.     

Effects of SWNT and metallic catalyst on hydrogen absorption/desorption performance of MgH2

The microstructure and absorption/desorption characteristics of composite MgH2 and 5 wt % as-prepared single-walled carbon nanotubes (MgH2-5ap) obtained by the mechanical grinding method were investigated. Experimental results show that the MgH2-5ap sample exhibits faster absorption kinetics and relatively lower desorption temperature than pure MgH2 or MgH2-purified single-walled carbon nanotube composite. Storage capacities of 6.0 and 4.2 wt % hydrogen for the MgH2-5ap composite were achieved in 60 min at 423 and 373 K, respectively. Furthermore, its desorption temperature was reduced by 70 K due to the introduction of as-prepared single-walled carbon nanotubes (SWNTs). In addition, the different effects of SWNTs and metallic catalysts contained in the as-prepared SWNTs were also investigated and a hydrogenation mechanism was proposed. It is suggested that metallic particles may be mainly responsible for the improvement of the hydrogen absorption kinetics, and SWNTs for the enhancement of hydrogen absorption capacity of MgH2.     

Protonation of carbon single-walled nanotubes studied using 13C and 1H-13C cross polarization nuclear magnetic resonance and Raman spectroscopies

The reversible protonation of carbon single-walled nanotubes (SWNTs) in sulfuric acid and Nafion was investigated using solid-state nuclear magnetic resonance (NMR) and Raman spectroscopies. Magic-angle spinning (MAS) was used to obtain high-resolution 13C and 1H-13C cross polarization (CP) NMR spectra. The 13C NMR chemical shifts are reported for bulk SWNTs, H2SO4-treated SWNTs, SWNT-Nafion polymer composites, SWNT-AQ55 polymer composites, and SWNTs in contact with water. Protonation occurs without irreversible oxidation of the nanotube substrate via a charge-transfer process. This is the first report of a chemically induced change in a SWNT 13C resonance brought about by a reversible interaction with an acidic proton, providing additional evidence that carbon nanotubes behave as weak bases. Cross polarization was found to be a powerful technique for providing an additional contrast mechanism for studying nanotubes in contact with other chemical species. The CP studies confirmed polarization transfer from nearby protons to nanotube carbon atoms. The CP technique was also applied to investigate water adsorbed on carbon nanotube surfaces. Finally, the degree of bundling of the SWNTs in Nafion films was probed with the 1H-13C CP-MAS technique.     

Growth of millimeter-long and horizontally aligned single-walled carbon nanotubes on flat substrates

Millimeter-long and well-aligned single-walled carbon nanotubes (SWNTs) have been produced on silica/silicon surfaces using the carbon monoxide chemical vapor deposition (CO-CVD) method. The orientation of the nanotube arrays can be well-controlled by the gas flow during the growth. The majority of the orientated SWNTs are straight and individual. The length of the nanotubes can be >2 mm for a 10 min growth. Furthermore, multidimensional crossed-networks of SWNT can be easily generated by multistep processes. These results present a great opportunity in the controllable production of organized SWNT arrays for large-scale carbon nanotube-based nanodevice fabrication.     

Cobalt ultrathin film catalyzed ethanol chemical vapor deposition of single-walled carbon nanotubes

We report a simple and efficient chemical vapor deposition (CVD) process that can grow oriented and long single-walled carbon nanotubes (SWNTs) using a cobalt ultrathin film ( approximately 1 nm) as the catalyst and ethanol as carbon feedstock. In the process, millimeter- to centimeter-long, oriented and high-quality SWNTs can grow horizontally on various flat substrate surfaces, traverse slits as large as hundreds of micrometers wide, or grow over vertical barriers as high as 20 microm. Such observations demonstrate that the carbon nanotubes are suspended in the gas flow during the growth. The trace amount of self-contained water (0.2-5 wt %) in ethanol may act as a mild oxidizer to clean the nanotubes and to elongate the lifetime of the catalysts, but no yield improvement was observed at the CVD temperature of 850 degrees C. We found that tilting the substrates supporting the Co ultrathin film catalysts can grow more, longer carbon nanotubes. A mechanism is discussed for the growth of long SWNTs.     

Interaction of a transition metal atom with intrinsic defects in single-walled carbon nanotubes

Interaction of a transition metal atom with defects in single-walled carbon nanotubes (SWNTs) were investigated through density functional theory calculations. For three kinds of intrinsic defects (single vacancies, double vacancies and Stone-Wales defects) in (5,5) armchair and (10,0) zigzag SWNTs, stable configurations were analyzed. The orientation of the specific bonds of the defects is related to the most stable configuration among several possible configurations. The stable adsorption sites and binding energies of a Ni atom on three intrinsic defects were calculated and compared to those on perfect side walls. All defects enhance Ni adsorption, and the single vacancy shows the most exothermic binding. These results shed light on the nature of the interaction of the transition metal with defects in SWNT, an important topic to the many aspects of carbon nanotubes interacting with transition metals. Particularly, this is useful for the fabrication of nanosized transition metal particles supported on carbon nanotubes.     

Antibacterial effects of carbon nanotubes: size does matter!

We provide the first evidence that the size (diameter) of carbon nanotubes (CNTs) is a key factor governing their antibacterial effects and that the likely main CNT-cytotoxicity mechanism is cell membrane damage by direct contact with CNTs. Experiments with well-characterized single-walled carbon nanotubes (SWNTs) and multiwalled carbon nanotubes (MWNTs) demonstrate that SWNTs are much more toxic to bacteria than MWNTs. Gene expression data show that in the presence of both MWNTs and SWNTs, Escherichia coli expresses high levels of stress-related gene products, with the quantity and magnitude of expression being much higher in the presence of SWNTs.