A novel high efficiency benzophenone based polymeric photoinitiator from ring-opening polymerization of benzoxazine

A novel polymeric photoinitiator based on benzoxazine was synthesized by introducing 4-hydroxy benzophenone, diglycolamine and paraformaldehyde into the macromolecular chain. Its molecular structure was characterized by ¹H NMR, FTIR, and UV-Vis spectroscopy. Photopolymerization of tripropylene glycol diacrylate and trimethylolpropane triacrylate initiated by polybenzoxazine, benzoxazine, and benzophenone was studied by real time FTIR spectroscopy. The results obtained are discussed.     

Characterization of chitosan microparticles reinforced cellulose biocomposite sponges regenerated from ionic liquid

The chitosan-microparticles reinforced cellulose biocomposite sponges regenerated from ionic liquid were prepared and characterized. Fourier transform infrared (FTIR) spectroscopy confirmed that the cellulose dissolved in 1-allyl-3-methylimidazolium chloride without derivatization. Chitosan particles as reinforcement were incorporated into the cellulose matrix. FTIR spectra indicated hydrogen bonding between hydroxyl groups of cellulose and chitosan. The biocomposite sponges showed uniform three-dimensional interconnected porous structures. The breaking strength of the sponges increased significantly, from 0.09 to 0.32 MPa with the addition of 1.0 wt% chitosan. The sponges also demonstrated excellent antibacterial activity against S. aureus and E. coli with the average inhibition zone diameters >2 mm and the inhibition rate higher than 80 %. Furthermore, the biocomposite sponges exhibited good moisture penetrability and high porosity. The water uptake ability of the sponge was >25 times of its weight in water with a fast swelling. The chitosan/cellulose composite sponge is expected to be a promising material for potential applications as wound dressing.     

Thermal decomposition study of HAuCl4·3H2O and AgNO3 as precursors for plasmonic metal nanoparticles

Thermal decomposition of HAuCl₄·3H₂O and AgNO₃, as precursors for Au and Ag nanoparticles, respectively, was monitored by coupled TG–DTA with TG/EGA–FTIR and EGA–MS techniques in a flowing 80 %Ar + 20 %O₂ and Ar atmospheres in the temperature range of 30–600 °C. The intermediate and final products of thermal decomposition were analysed by ex situ XRD and FTIR techniques. The thermal degradation of HAuCl₄·3H₂O starts immediately after melting at 75 °C and takes place in three steps in the temperature range of 75–320 °C with total mass loss of 49.4 and 49.7 % in artificial air and Ar atmospheres, respectively. EGA by MS and FTIR revealed a simultaneous release of H₂O and HCl in the temperature range of 75–235 °C. EGA by MS revealed a release of Cl₂ at around 225 °C and in the interval of 250–320 °C. According to the XRD analysis, the main solid product in the end of the first decomposition step at 190 °C is AuCl₃; in the end of the second decomposition step at 240 °C is AuCl and the final product at 320 °C is Au. The thermal decomposition of AgNO₃ takes place in a single step in the temperature range of 360–515 °C with a total mass loss of 39.0 and 37.8 % in flowing artificial air and Ar atmospheres, respectively. According to EGA–MS and EGA–FTIR the main evolved gases are NO₂, NO and O₂. The final product of the thermal decomposition at 600 °C is Ag irrespective of the atmosphere.     

Structural characterization and electrical conductivity studies of BaMoO4 nanofibers prepared by sol–gel and electrospinning techniques

Scheelite type BaMoO₄ nanofibers were prepared by using acrylamide assisted sol–gel process and electrospinning technique. The prepared Scheelite BaMoO₄ nanofibers were characterized by using TG/DTA, XRD, FTIR, FT-Raman and SEM–EDX techniques. Thermal behavior, crystalline phase and structure of the prepared BaMoO₄ nanofibers samples were confirmed from the analysis of the obtained results of TG/DTA, XRD, FTIR and FT-Raman respectively. SEM micrographs along with EDX showed the formation of one dimensional (1D) nanofibers 100–350 nm diameters and existence of Ba, Mo and O elements in the BaMoO₄ nanofibers sample. The electrical conductivity of BaMoO₄ nanofibers as a function of temperature 200–400 °C under air was evaluated by analyzing the measured impedance data using the winfit software. The newly prepared Scheelite type BaMoO₄ nanofibers showed electrical conductivity of 0.92 × 10^?3 S/cm at 400 °C.     

Crystallization behavior,tensile behavior and hydrophilicity of poly(vinylidene fluoride)/poly(vinyl pyrrolidone) blends

Binary polymer blends of hydrophobic poly(vinylidene fluoride) (PVDF) and hydrophilic poly(vinylpyrrolidone) (PVP) were prepared by melt blending. The crystallization behavior, mechanical properties and hydrophilicity of the binary blends were investigated using Fourier transform infrared spectroscopy (FTIR), wide-angle X-ray diffractometry (WAXD), differential scanning calorimeter (DSC) scanning, non-isothermal crystallization kinetics, successive self-nucleation and annealing (SSA) fractionation, tensile tests and contact angle tests. The analysis of FTIR, WAXD, DSC scanning, non-isothermal crystallization kinetics and SSA fractionation showed that the addition of PVP greatly influenced the crystallization behavior of the sample. As the PVP content increased, the crystallization temperature, crystallization rate, degree of crystallinity, and the amount of thick lamellaes decreased gradually. Meanwhile, PVP favored the formation of β-phase of PVDF. The results of tensile test revealed that the addition of PVP increased the elongation at break of the sample, and lowered the yield stress. Besides, the result of contact angle test indicated that the hydrophilicity of PVDF was remarkably improved in the presence PVP. The relationship between crystallization behavior and the tensile behavior, hydrophilicity were discussed.     

An experimental study on thermal decomposition behavior of magnesite

Thermal decomposition of magnesite is investigated by using a TG–MS. Different kinetic methods including Coats–Redfern, Flynn–Wall–Ozawa, and Kissinger–Akahira–Sunose are used to investigate the thermal decomposition kinetics of magnesite. It was observed that the activation energy values obtained by these methods are similar. The average apparent activation energy is found to be about 203 kJ mol^?1. The raw magnesite and its decomposition products obtained at different temperatures are analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). The concentration of functional groups, crystal structure and composition, and apparent morphology of decomposition products were studied in detail. The FTIR, XRD, and SEM analyses showed that magnesite was completely decomposed at 973 K to form MgO.     

A new method for preparation of magnetic polymer particles

Synthesis of magnetic polymer particles (MPP) was carried out through two steps. Firstly, the iron oxide particles carrying vinyl groups were synthesized, and in the second step, styrene (ST), divinyl benzene (DVB), and 2-hydroxyethyl methacrylate (HEMA) were polymerized on the surface of modified iron oxide through an emulsifier-free emulsion polymerization technique. The final particles were characterized by a Fourier transform infrared spectroscopy (FTIR), Fourier transform infrared attenuated total reflectance spectroscopy (FTIR-ATR), X-ray diffractometer (XRD), thermal gravimetry analysis (TGA), Fritsch particle sizer, scanning electron microscope (SEM), and vibrating sample magnetometer (VSM). Experimental analysis confirmed that all the iron oxide particles were embedded in a polymer phase and the final particles have more than 67 % iron oxide content. According to magnetometry data, the shape of the hysteresis loops evidences the ferromagnetic character of the particles.     

Functionalization of cellulose with epoxy groups via γ-initiated RAFT-mediated grafting of glycidyl methacrylate

Glycidyl methacrylate (GMA), was grafted from cellulose by the combination of radiation-induced initiation and the reversible addition-fragmentation chain transfer (RAFT) polymerization technique, leading to epoxy functionalized surfaces that enable further modifications. Cumyl dithiobenzoate and 2-cyanoprop-2-yl dithiobenzoate were employed as the RAFT agents. The effects of absorbed dose, monomer and RAFT agent concentrations and solvent choice on grafting yield were investigated. Characterization of the synthesized copolymers by ATR-FTIR spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, thermal analysis and contact angle measurements revealed the grafting of poly(glycidyl methacrylate) (PGMA) from cellulose. Size-exclusion chromatography analysis indicated the difficulty of controlling the polymerization of GMA due to branching and/or crosslinking reactions that might occur in PGMA structure under γ-radiation.     

Structural and thermal properties of HDPE/n-AlN polymer nanocomposites

High-density polyethylene (HDPE) containing various volume fractions (0–20 vol%) of aluminum nitride nanoparticles (n-AlN) is prepared by melt mixing. Structural and morphological characterizations of the prepared composites are carried out by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and atomic force microscopy (AFM). Thermal stability and degradation kinetics of HDPE/AlN (nano) composites are investigated by Thermogravimetric analysis (TG). HR-TEM micrographs confirm fairly uniform dispersion of AlN nanoparticles, as well as the existence of long interconnected chain-like aggregates. AFM images also confirm homogeneous dispersion of n-AlN in the polymer matrix. Roughness analysis from the AFM data indicates the presence of substantial undulation from the mean surface level. Thermogravimetric data indicate small improvement in the thermal stability of the composites. Kinetic parameters, viz., the activation energy (E _a), frequency factor (A), and reaction order (n) are estimated using the isoconversional methods of Kissinger, Flynn–Wall–Ozawa (FWO), KAS, and Friedman. Activation energies (E _a) calculated by the above four models display nearly similar features and are enhanced by the presence of AlN nanoparticles. Kinetics of degradation of HDPE-AlN (nano) composites follows a first-order reaction.     

Thermal decomposition of polymethylmethacrylate synthesized with anionic catalysts

TG and DTA data are used to show that the thermal decomposition of polymethylmethacrylate (PMMA) synthesized with anionic catalysts depends on the nature of the catalyst. It is found that the thermal stability of PMMA obtained by using anionic amide catalysts is higher than that of radical PMMA and of PMMA obtained with other anionic catalysts, and depends on the temperature of polymerization and on the molecular weight of the polymer.     

Using TG–FTIR and TG–MS to study thermal degradation of metal hypophosphites

Three typical metal hypophosphite flame retardants La(H₂PO₂)₃·H₂O (LHP), Ce(H₂PO₂)₃·H₂O (CHP), and Al(H₂PO₂)₃ (AHP) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction, scanning electron microscopy, thermogravimetric analysis (TG), derivative thermogravimetric analysis, and differential thermal analysis. The thermal degradation products from the synthesized metal hypophosphites were also investigated using thermogravimetry coupled with Fourier transform infrared spectroscopy (TG–FTIR) and thermogravimetry coupled with mass spectrometry (TG–MS). The synthesized metal hypophosphites were also used as flame retardants for poly (1,4-butylene terephthalate) (PBT), and the combustion properties of flame-retarded PBT were evaluated using the limiting oxygen index and UL-94 tests. The results showed that the metal hypophosphites LHP, CHP, and AHP can be used as effective flame retardants for PBT, and these compounds can be obtained through a simple precipitation method. TG–FTIR and TG–MS results showed that the degradation process of AHP involves two steps, corresponding to the removal PH₃ reaction and the further dehydration reaction of the hydrogen phosphate aluminum. While LHP and CHP have three degradation steps, the additional step is due to that LHP and CHP which will loss the crystal water at lower temperature.     

Thermal behaviour of the anticancer drug carboxyethylgermanium sesquioxide

The thermal behaviour of carboxylethylgermanium sesquioxide (Ge-132) was studied by using DSC, TG and FTIR. A crystalline-amorphous transition peak and a decomposition peak were observed below 320 °C. The conclusion drawn by Minoru Tsutsai that Ge-132 gave no indication of the decomposition or the melting below 320 °C has been proved not to be consistent with reality.     

Preparation of Cu (II)/PEI–QPEI/SiO2 nanopowder as antibacterial material

The silica nanoparticles were prepared by the sol–gel process, and then twice modified and grafted by polyethylenimine (PEI) on their surface. After quaternary ammonium reaction and chelated copper reaction, the PEI/SiO₂, QPEI/SiO₂, PEI–QPEI/SiO₂ and Cu (II)/PEI–QPEI/SiO₂ nanopowders were obtained in turn. The morphology and structure of the products were characterized through SEM, EDX, HRTEM, FTIR and element analysis. At the same time, the antibacterial activity of the products to E. coli and Candida were evaluated through quantification and qualitative ways, e.g. microcalorimetric method and culture dish method. The results suggested that the Cu (II)/PEI–QPEI/SiO₂, a novel three-component functional nanopowder, presented the best antibacterial activity to both E. coli and Candida duo to the synergistic sterilization capability of the ammonium salt and copper ions, compared with other products. It indicated that the Cu (II)/PEI–QPEI/SiO₂ nanopowder could be a novel antibacterial nanomaterial to widely application in preventing and minimizing bacteria of the organism and environment in future.     

Thermal evaluation of heavy crude oil by simultaneous TG-DSC-FTIR: Part 2

In this work a continuous investigation of the thermal behavior of two heavy crude oils, P2 and P4, from Brazilian basin was performed using simultaneous technique TG-DSC-FTIR. In previous publication—Part 1, about these same oils at nitrogen atmosphere, it was identified for P2 sample that the main evolved component was 1-dodecyl-4-octyl-cyclohexane at 450 °C and for P4 sample the main component was evolved at 340 °C referent to 1-methyl cyclohexene. The simultaneous technique TG/FTIR was also performed for the present study in synthetic air atmosphere and was more elucidative than analysis in nitrogen atmosphere. For heavy oil P2, there was identified the presence of carbon dioxide, carbon monoxide and 4-methylcyclohexanone at 382 °C. Whilst for sample P4 the gaseous components evolved at 454 °C were carbon dioxide, carbon monoxide and 1-methylcyclohexene. Also differences in TG analysis for both samples were observed regarding the number of components. In air atmosphere crude oil P2 exhibited three decomposition stages, in nitrogen were only two. Four stages were exhibited on the thermogravimetric curve for oil P4 in synthetic air, while in nitrogen atmosphere there were three stages. Thus, this study has a unique character regarding the use of combined simultaneous techniques as STA/FTIR to identify components in heavy oil which may contribute to upgrade methods referring to crude oil composition.     

Heat of reaction and curing of epoxy resin

The heat of reaction and kinetics of curing of diglycidyl ether of bisphenol-A (DGEBA) type of epoxy resin with catalytic amounts of ethylmethylimidazole (EMI) have been studied by differential power-compensated calorimetry as a part of the program for the study of process monitoring for composite materials. The results were compared with those from 1∶1 and 1∶2 molar mixtures of DGEBA and EMI. A method of determination of heat of reaction from dynamic thermoanalytical instruments was given according to basic thermodynamic principles. The complicated mechanism, possibly involving initial ionic formation, has also been observed in other measurements, such as by time-domain dielectric spectroscopy. The behavior of commercially available DGEBA resin versus purified monomeric DGEBA were compared. The melting point of purified monomeric DGEBA crystals is 41.4 °C with a heat of fusion of 81 J/g. The melt of DGEBA is difficult to crystallize upon cooling. The glass transition of purified DGEBA monomer occurs around ?22 °C with aΔC _p of 0.60 J/K/g.     

Fluorescent protein-based FRET sensor for intracellular monitoring of redox status in bacteria at single cell level

Monitoring of intracellular redox status in a bacterial cell provides vital information about the physiological status of the cell, which can be exploited in several applications such as metabolic engineering and computational modeling. Fluorescent protein-based genetically encoded sensors can be used to monitor intracellular oxidation/reduction status. This study reports the development of a redox sensor for intracellular measurements using fluorescent protein pairs and the phenomenon of Förster resonance energy transfer (FRET). For the development of the sensor, fluorescent proteins Citrine and Cerulean were genetically modified to carry reactive cysteine residues on the protein surface close to the chromophore and a constructed FRET pair was fused using a biotinylation domain as a linker. In oxidized state, the FRET pairs are in close proximity by labile disulfide bond formation resulting in higher FRET efficiency. In reducing environment, the FRET is diminished due to the increased distance between FRET pairs providing large dynamic measurement range to the sensor. Intracellular studies in Escherichia coli mutants revealed the capability of the sensor in detecting real-time redox variations at single cell level. The results were validated by intensity based and time resolved measurements. The functional immobilization of the fluorescent protein-based FRET sensor at solid surfaces for in vitro applications was also demonstrated. Graphical Abstract

Schematic representation of FRET-based redox sensor     

Facile formation of stimuli-responsive,fluorescent and magnetic nanoparticles based on cellulose stearoyl ester via nanoprecipitation

In comparison to stimuli-responsive, multi-functional nanoparticles (NPs) from synthetic polymers, such NPs based on sustainable, naturally occurring polysaccharides are still scarce. In the present study, stable stimuli-responsive, fluorescent and magnetic NPs were fabricated using cellulose stearoyl esters (CSEs) consisting of cellulose and stearoyl groups. The multifunctional NPs with the average diameters between 80 and 250 nm were obtained after facile nanoprecipitation using CSE solutions containing Fe₃O₄-NPs. Using the aqueous solution of fluorescent rhodamine B as precipitant, NPs with rhodamine B on NP surface were obtained. Rhodamine B could be released depending on the temperature. In comparison, stearoylaminoethyl rhodamine B can be encapsulated in CSE-NPs, which renders obtained NPs reversible fluorescence in response to UV illumination and heat treatment.     

Isolation and Immobilization of Influenza Virus-Specific N-SA-α-2,3-Gal Receptors Using Magnetic Nanoparticles Coated with Chitosan and Maackia amurensis Lectin

Avian influenza viruses preferentially bind to sialic acid alpha-2,3-galactose (N-SA-α-2,3-Gal) receptors on epithelial cells. Herein, we describe a procedure we have developed for isolation of N-SA-α-2,3-Gal receptors from porcine trachea using magnetic nanoparticles (NPs) coated with chitosan (NP-Ch) and functionalized with Maackia amurensis lectin (NP-lectin). Magnetic nanoparticles were coated with chitosan in a one-step co-precipitation, and then M. amurensis lectin was immobilized covalently using glutaraldehyde. Lectin coated nanoparticles were incubated with sialic acid enriched fraction of tracheal homogenate, and N-SA-α-2,3-Gal receptor was extracted under magnetic field in two cycles. The presence of 66.4 kDa protein was determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The interaction of immobilized receptor (NP-Ch-R) with M. amurensis lectin (NP-Ch-R-L) was demonstrated by Fourier transform infrared spectrometry (FTIR) and thermogravimetric analysis (TGA).     

Reverse atom transfer radical polymerization of methyl methacrylate in the presence of Azo-functionalized carbon nanotubes: a grafting from approach

After oxidation of carbon nanotubes (CNT), its carboxyl groups were subsequently converted to acyl chloride and hydroxyl functionalities. Subsequently, 4,4′-azobis (4-cyanopentanoic acid) (ACPA) was attached to the hydroxyl groups of nanotubes by an esterification reaction to yield azo initiator-anchored nanotubes (CNTAzo). Then, grafting from reverse atom transfer radical polymerization of methyl methacrylate in the presence of CNTAzo in different weight percents was carried out. Appearance of N_1s band in the spectrum of CNTAzo originates from the covalent attachment of ACPA on CNT. Successful functionalization of CNT with EG, ACPA, and PMMA was also proved by FTIR. SEC results show that molecular weight and PDI values of the attached chains are higher. XRD and Raman spectroscopy were used to study the structural characteristics of the CNTs. Graft density of modifier and PMMA in various CNTs was evaluated by TGA. Finally, morphology of the CNTs was studied by scanning and transmission electron microscopies.