Chloro- and phenoxy-phosphines in frustrated Lewis pair additions to alkynes

The reaction of tBu(C(6)H(4)O(2))P, with the borane B(C(6)F(5))(3) gives rise to NMR data consistent with the formation of the classical Lewis acid-base adduct tBu(C(6)H(4)O(2))P(B(C(6)F(5))(3)) (1). In contrast, the NMR data for the corresponding reactions of tBu(C(20)H(12)O(2))P and Cl(C(20)H(12)O(2))P with B(C(6)F(5))(3) were consistent with the presence of equilibria between free phosphine and borane and the corresponding adducts. Nonetheless, in each case, the adducts tBu(C(20)H(12)O(2))P(B(C(6)F(5))(3)) (2) and Cl(C(20)H(12)O(2))P(B(C(6)F(5))(3)) (3) were isolable. The species 1 reacts with PhCCH to give the new species tBu(C(6)H(4)O(2))P(Ph)C=CHB(C(6)F(5))(3) (4) in near quantitative yield. In an analogous fashion, the addition of PhCCH to solutions of the phosphines tBu(C(20)H(12)O(2))P, tBuPCl(2) and (C(6)H(3)(2,4-tBu(2))O)(3)P each with an equivalent of B(C(6)F(5))(3) gave rise to L(Ph)C=CHB(C(6)F(5))(3) (L = tBu(C(20)H(12)O(2))P 5, tBuPCl(2)6 and (C(6)H(3)(2,4-tBu(2))O)(3)P 7). X-Ray data for 1, 2, 6 and 7 are presented. The implications of these findings are considered.     

Synthesis and characterisation of luminescent fluorinated organoboron compounds

The reaction of 8-hydroxyquinoline (HQ) with B(C(6)F(5))(3) leads to the formation of the zwitterionic compound (C(6)F(5))(3)BQH (1), involving a proton migration from O to N. Compound 1 can be converted thermally to (C(6)F(5))(2)BQ (2), which can also be prepared from (C(6)F(5))(2)BCl and HQ. The reaction of HQ with (C(6)F(5))B(OC(6)F(5))(2) generates initially (C(6)F(5))(OC(6)F(5))BQ (3), which easily hydrolyses to give the diboron compound ((C(6)F(5))BQ)(2)O (4). Compounds 1, 2 and 4 have been fully characterised, including X-ray analysis. The spectroscopic properties of these compounds, including photoluminescence (PL) have been investigated and compared with the non-fluorinated luminescent boron compound (C(6)H(5))(2)BQ and also with AlQ(3). The changes in luminescent behaviour upon fluorination of these boron quinolinate compounds have been rationalised using computational studies.     

Zirconium complexes having a chiral phosphanylamide in the co-ordination sphere

The chiral phosphanylamido ligand, (N(CHMePh)(PPh2))-, has been introduced into co-ordination chemistry. As starting material the oily amines HN(R-*CHMePh)(PPh2)(1a) and HN(S-*CHMePh)(PPh2)(1b) were used. To reconfirm their absolute structure, 1b was oxidized with H2O2 in air to obtain HN(S-*CHMePh)(P(O)Ph2)(2) as a solid compound. The solid-state structure of 2 was established by single-crystal X-ray diffraction. The lithium salts of both enantiomers Li(N(R-*CHMePh)(PPh2))(3a) and Li(N(S-*CHMePh)(PPh2))(3b) were prepared by deprotonation reaction of 1a,b. Compounds 3a,b were further reacted with zirconocen dichloride to give the chiral metallocenes [(eta5-C5H5)2Zr(Cl)(eta2-N(R-*CHMePh)(PPh2))](4a) and [(eta5-C5H5)2Zr(Cl)(eta2-N(S-*CHMePh)(PPh2))](4b). In an alternative approach to give chiral zirconium compounds, the neutral amine 1b was reacted with [(PhCH2)4Zr] to give the enantiomeric pure complex [(PhCH2)3Zr(eta2-N(S-*CHMePh)(PPh2))](5). The solid-state structures of all zirconium complexes were determined by single-crystal X-ray diffraction.     

Chiral fluorous dialkoxy-diamino zirconium complexes: synthesis and use in stereospecific polymerization of 1-hexene

New catalysts for the isospecific polymerization of 1-hexene based on cationic zirconium complexes incorporating the tetradentate fluorous dialkoxy-diamino ligands [OC(CF(3))(2)CH(2)N(Me)(CH(2))(2)N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(2)NO)(2-)] and [OC(CF(3))(2)CH(2)N(Me)(1R,2R-C(6)H(10))N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(Cy)NO)(2-)] have been developed. The chiral fluorous diamino-diol [(ON(Cy)NO)H(2), 2] was prepared by ring-opening of the fluorinated oxirane (CF(3))(2)COCH(2) with (R,R)-N,N'-dimethyl-1,2-cyclohexanediamine. Proligand 2 reacts cleanly with [Zr(CH(2)Ph)(4)] and [Ti(OiPr)(4)] precursors to give the corresponding dialkoxy complexes [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3) and [Ti(OiPr)(2)(ON(Cy)NO)] (4), respectively. An X-ray diffraction study revealed that 3 crystallizes as a 1:1 mixture of two diastereomers (Lambda-3 and Delta-3), both of which adopt a distorted octahedral structure with trans-O, cis-N, and cis-CH(2)Ph ligands. The two diastereomers Lambda-3 and Delta-3 adopt a C(2)-symmetric structure in toluene solution, as established by NMR spectroscopy. Cationic complexes [Zr(CH(2)Ph)(ON(2)NO)(THF)(n)](+) (n=0, anion=[B(C(6)F(5))(4)](-), 5; n=1, anion=[PhCH(2)B(C(6)F(5))(3)](-), 6) and [Zr(CH(2)Ph)(ON(Cy)NO)(THF)](+)[PhCH(2)B(C(6)F(5))(3)](-) (7) were generated from the neutral parent precursors [Zr(CH(2)Ph)(2)(ON(2)NO)] (H) and [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3), and their possible structures were determined on the basis of (1)H, (19)F, and (13)C NMR spectroscopy and DFT methods. The neutral zirconium complexes H and 3 (Lambda-3/Delta-3 mixture), when activated with B(C(6)F(5))(3) or [Ph(3)C](+)[B(C(6)F(5))(4)](-), catalyze the polymerization of 1-hexene with overall activities of up to 4500 kg PH mol Zr(-1) h(-1), to yield isotactic-enriched (up to 74 % mmmm) polymers with low-to-moderate molecular weights (M(w)=4800-47 200) and monodisperse molecular-weight distributions (M(w)/M(n)=1.17-1.79).     

Effects of Pt...Pt bonding, anions, solvate molecules, and hydrogen bonding on the self-association of Chugaev's cation, a platinum complex with a chelating carbene ligand

Five salts, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](BPh(4)).CH(3)OH, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](PF(6)).CH(2)Cl(2), [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.4H(2)O, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Br.3.5H(2)O, and [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.0.1H(2)O, have been crystallized and examined by single crystal X-ray diffraction. While the internal structure of the cation is similar in all salts, the interactions between cations vary in the different salts. Yellow [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](BPh(4)).CH(3)OH and red [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](PF(6)) form face-to-face dimers with Pt...Pt separations of 3.6617(6) and 3.340(2) A, respectively. In the latter, hydrogen bonding of the chelating ligand to adjacent anions facilitates the close approach of pairs of cations. The salts [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.4H(2)O, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Br.3.5H(2)O, and [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.0.1H(2)O form columnar structures with Pt...Pt separations that range from 3.2514(5) to 3.5643(6) A. The water molecules and anions surround these columns and form bridges between neighboring columns. The electronic spectra of aqueous solutions of [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.4H(2)O show spectral changes upon increasing concentrations of the platinum complex that are indicative of the formation of a dimer in solution with an equilibrium constant for dimerization of 23(1).     

Syntheses of chromium pentacarbonyl derivatives of arsenic(V) and antimony(V). contrasting chemical reactivity with organic halogen derivatives

We have synthesized a new series of chromium-group 15 dihydride and hydride complexes [H(2)As(Cr(CO)(5))(2)](-) (1) and [HE(Cr(CO)(5))(3)](2)(-) (E = As, 2a; E = Sb, 2b), which represent the first examples of group 6 complexes containing E-H fragments. The contrasting chemical reactivity of 2a and 2b with organic halogen derivatives is demonstrated. The reaction of 2a with RBr (R = PhCH(2), HC triple bond CCH(2)) produces the RX addition products [(R)(Br)As(Cr(CO)(5))(2)](-) (R = PhCH(2), 3; R = C(3)H(3), 4), while the treatment of 2b with RX (RX = PhCH(2)Br or HC triple bond CCH(2)Br, CH(3)(CH(2))(5)C(O)Cl) forms the halo-substituted complexes [XSb(Cr(CO)(5))(3)](2-) (X = Br, 5; X = Cl, 6). Moreover, the dihaloantimony complexes [XX'Sb(Cr(CO)(5))(2)](-) can be obtained from the reaction of 2b with the appropriate organic halides. In this study, a series of organoarsenic and antimony chromium carbonyl complexes have been synthesized and structurally characterized and the role of the main group on the formation of the resultant complexes is also discussed.     

New dinuclear catalysts Rh(2)(N-O)(2)[(C6H4)P(C6H5)2]2 with imidate ligands: synthesis and isomerization from head-to-tail to head-to-head configuration of the imidate ligands

Two new dirhodium(II) catalysts of general formula Rh(2)(N-O)(2)[(C(6)H(4))P(C(6)H(5))(2)](2) (N-O = C(4)H(4)NO(2)) are prepared, starting from Rh(2)(O(2)CCH(3))(2)(PC)(2)L(2) [PC = (C(6)H(4))P(C(6)H(5))(2) (head-to-tail arrangement); L = HO(2)CCH(3)]. The thermal reaction of Rh(2)(O(2)CCH(3))(2)(PC)(2).L(2) with the neutral succinimide stereoselectively gives one compound that according to the X-ray structure determination has the formula Rh(2)(C(4)H(4)NO(2))(2)[(C(6)H(4))P(C(6)H(5))(2)](2) (1). It corresponds to the polar isomer with two bridging imidate ligands in a head-to-head configuration. However, stepwise reaction of Rh(2)(O(2)CCH(3))(2)(PC)(2).L(2) with (CH(3))(3)SiCl and potassium succinimidate yields a mixture of 1 and one of the two possible isomers (structure B) with a head-to-tail configuration of the imidate ligands, Rh(2)(C(4)H(4)NO(2))(2)[(C(6)H(4))P(C(6)H(5))(2)](2) (2), also characterized by X-ray methods. In solution, compound 2 undergoes slow isomerization to 1; the rate of this process is enhanced by the presence of acetonitrile. Compounds 1 and 2 are obtained as pure enantiomers starting from (M)- and (P)-Rh(2)(O(2)CCH(3))(2)(PC)(2).L(2) rather than from the racemic mixture. Their enantioselectivities in cyclopropanation of 1-diazo-5-penten-2-one are similar to those reported for the dirhodium amidate catalysts.     

The elusive vanadate (V(3)O(9))(3-): isolation, crystal structure, and nonaqueous solution behavior.

The isolation, crystal structure, and nonaqueous solution characteristics of the first trinuclear vanadate are presented. The crystal structure reveals a six-membered cyclic arrangement of alternating vanadium and oxygen atoms for the anion of [(C(4)H(9))(4)N](3)(V(3)O(9)). The (51)V NMR spectrum of this compound in CD(3)CN exhibits multiple peaks. The relative intensities of each resonance can be altered by concentration and temperature changes, the later of which are reversible. Addition of [(C(4)H(9))(4)N]Br and NaClO(4) also perturbs the equilibria between species observed. Conductivity data for [(C(4)H(9))(4)N](3)(V(3)O(9)) in CH(3)CN as a function of concentration display pronounced curvature and indicate formation of a neutral species in solution at the highest concentrations studied. Stoichiometric mixtures of [(C(4)H(9))(4)N](3)(V(3)O(9)) with the known vanadates [(C(4)H(9))(4)N](3)(HV(4)O(12)), [(C(4)H(9))(4)N](3)(V(5)O(14)), and [(C(4)H(9))(4)N](3)(H(3)V(10)O(28)) are prepared and examined by (51)V NMR. Equilibration between the various vanadates is observed and characterized. Resonances for these known vanadates, however, cannot be used to identify the peaks found for [(C(4)H(9))(4)N](3)(V(3)O(9)), alone, in solution. The existence of ion pairs in acetonitrile is the only interpretation for the solution behavior of [(C(4)H(9))(4)N](3)(V(3)O(9)) consistent with all data. As such, we can directly observe each possible ion pairing state by (51)V NMR: (V(3)O(9))(3-) at -555 ppm, [[(C(4)H(9))(4)N](V(3)O(9))] (2-) at -569 ppm, [[(C(4)H(9))(4)N](2)(V(3)O(9))](-) at -576 ppm, and [(C(4)H(9))(4)N](3)(V(3)O(9)) at -628 ppm. To the best of our knowledge, [(C(4)H(9))(4)N](3)(V(3)O(9)) presents the first case in which every possible ion paired state can be observed directly from a parent polyion. Isolation and characterization of this simple metal oxo moiety may now facilitate efforts to design functional polyoxometalates.     

A new organic-inorganic hybrid layered molybdenum(V) cobalt phosphate constructed from [H24(Mo16O32)Co16(PO4)24(OH)4(C5H4N)2(H2O)6](4-) wheels and 4,4'-bipyridine linkers

A new layered molybdenum cobalt phosphate, Na(2)[Co(H(2)O)(6)][(Mo(16)O(32))Co(16)(PO(4))(4) (HPO(4))(16)(H(2)PO(4))(4)(OH)(4)(C(10)H(8)N(2))(4)(C(5)H(4)N)(2)(H(2)O)(6)]·4H(2)O (1), has been hydrothermally synthesized and structurally characterized. 1 crystallizes in the monoclinic space group P2(1)/n with a = 15.6825(18) ?, b = 39.503(4) ?, c = 17.2763(17) ?, β = 93.791(2)°, V = 10679.4(18) ?(3), and Z = 2. A polyoxoanion of 1 exhibits an unusual organic-inorganic hybrid wheel-type cluster, in which two pyridine ligands link to the surface Co(II) atoms of a [H(24)(Mo(16)O(32))Co(16)(PO(4))(24)(OH)(4)(H(2)O)(6)] (namely, {Mo(16)Co(16)P(24)}) wheel via the Co-N bonds. Furthermore, each {Mo(16)Co(16)P(24)} wheel is connected to four adjacent wheels by four pairs of 4,4'-bipyridine linkers, forming a 2D layered network. The susceptibility measurement shows the existence of dominant antiferromagnetic interactions in 1.     

Synthesis and structure of new carborane-substituted cyclotriphosphazenes

The reactions of [N(3)P(3)Cl(6)] with one, two, or three equivalents of the difunctional 1,2-closo-carborane C(2)B(10)H(10)[CH(2)OH](2) and K(2)CO(3) in acetone have been investigated. These reactions led to the new spiro-closo-carboranylphosphazenes gem-[N(3)P(3)Cl(6-2n)[(OCH(2))(2)C(2)B(10)H(10)](n)] (n=1 (1), 2 (2)) and the first fully carborane-substituted phosphazene gem-[N(3)P(3)[(OCH(2))(2)C(2)B(10)H(10)](3)] (3). A bridged product, non-gem-[N(3)P(3)Cl(4)[(OCH(2))(2)C(2)B(10)H(10)]] (4), was also detected. The reaction of the well-known spiro derivatives [N(3)P(3)Cl(2)(O(2)C(12)H(8))(2)] and [N(3)P(3)Cl(4)(O(2)C(12)H(8))] with the same carborane-diol and K(2)CO(3) in acetone gave the new compounds gem-[N(3)P(3)(O(2)C(12)H(8))(3-n)[(OCH(2))(2)C(2)B(10)H(10)](n)] (n=1 (5) or 2 (6), respectively), without signs of intra- or intermolecularly bridged species. Upon treatment with NEt(3) in acetone, compound 5 was converted into the corresponding nido-carboranylphosphazene. However, the reaction of gem-[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(10)H(10)]] (5) with NEt(3) in ethanol instead of acetone proceeded in a different manner to give the new compound (NHEt(3))(2)[N(3)P(3)(O(2)C(12)H(8))(2)(O)[OCH(2)C(2)B(9)H(10)CH(2)OCH(2)CH(3)]] (7). For compounds with two 2,2'-dioxybiphenyl units, gem-[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(10)H(10)]] (5), (NHEt(3))[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(9)H(10)]] (8), and (NHEt(3))(2)[N(3)P(3)(O(2)C(12)H(8))(2)(O)[OCH(2)C(2)B(9)H(10)CH(2)OCH(2)CH(3)]] (7), a mixture of different stereoisomers may be expected. However, for 5 and 7 only the meso compounds seem to be formed, with the same (R,S)-configuration as in the precursor [N(3)P(3)Cl(2)(O(2)C(12)H(8))(2)]. The reaction of 5 to give 8 seems to proceed with a change of configuration at one phosphorus center, giving a racemic mixture. The crystal structures of the nido-carboranylphosphazenes 7 and 8 have been confirmed by X-ray diffraction methods.     

Complexes of copper(II) with 3-(ortho-substituted phenylhydrazo)pentane-2,4-diones: syntheses, properties and catalytic activity for cyclohexane oxidation

Reactions of copper(II) with 3-phenylhydrazopentane-2,4-diones X-2-C(6)H(4)-NHN=C{C(=O)CH(3)}(2) bearing a substituent in the ortho-position [X = OH (H(2)L(1)) 1, AsO(3)H(2) (H(3)L(2)) 2, Cl (HL(3)) 3, SO(3)H (H(2)L(4)) 4, COOCH(3) (HL(5)) 5, COOH (H(2)L(6)) 6, NO(2) (HL(7)) 7 or H (HL(8)) 8] lead to a variety of complexes including the monomeric [CuL(4)(H(2)O)(2)]·H(2)O 10, [CuL(4)(H(2)O)(2)] 11 and [Cu(HL(4))(2)(H(2)O)(4)] 12, the dimeric [Cu(2)(H(2)O)(2)(μ-HL(2))(2)] 9 and the polymeric [Cu(μ-L(6))](n)] 13 ones, often bearing two fused six-membered metallacycles. Complexes 10-12 can interconvert, depending on pH and temperature, whereas the Cu(II) reactions with 4 in the presence of cyanoguanidine or imidazole (im) afford the monomeric compound [Cu(H(2)O)(4){NCNC(NH(2))(2)}(2)](HL(4))(2)·6H(2)O 14 and the heteroligand polymer [Cu(μ-L(4))(im)](n)15, respectively. The compounds were characterized by single crystal X-ray diffraction (complexes), electrochemical and thermogravimetric studies, as well as elemental analysis, IR, (1)H and (13)C NMR spectroscopies (diones) and ESI-MS. The effects of the substituents in 1-8 on the HOMO-LUMO gap and the relative stability of the model compounds [Cu(OH)(L(8))(H(2)O)]·H(2)O, [Cu(L(1))(H(2)O)(2)]·H(2)O and [Cu(L(4))(H(2)O)(2)]·H(2)O are discussed on the basis of DFT calculations that show the stabilization follows the order: two fused 6-membered > two fused 6-membered/5-membered > one 6-membered metallacycles. Complexes 9, 10, 12 and 13 act as catalyst precursors for the peroxidative oxidation (with H(2)O(2)) of cyclohexane to cyclohexanol and cyclohexanone, in MeCN/H(2)O (total yields of ca. 20% with TONs up to 566), under mild conditions.     

Supramolecular assemblies of dimetal complexes with polydentate N-donor ligands: from a discrete pyramid to a 3D channel network

Reactions of a dinuclear metal complex in the form of dirhodium(II) tetra(trifluoroacetate), [Rh(2)(O(2)CCF(3))(4)] (1), with a number of strong N-donor ligands having functional groups rigidly oriented at different directing angles have been found to yield supramolecular architectures of differing complexity. All structures have been established by X-ray crystallography. From reaction of 1 with neutral tris(4'-pyridyl)methylsilane ligand, CH(3)Si(C(5)H(4)N)(3) (L1), a discrete pyramid-shaped hexanuclear complex [[Rh(2)(O(2)CCF(3))(4)](3)CH(3)Si(C(5)H(4)N)(3)(eta(1)-C(6)H(6))(3)].C(6)H(6) (2.C(6)H(6)) has been isolated from benzene. In 2 three molecules of 1 are strongly coordinated to one L1 ligand at only one axial position of each dirhodium unit at the Rh-N distances of 2.152(6) A. The second rhodium atom of each dimetal complex in 2 weakly coordinates a benzene molecule with an Rh-C distance of 2.69(2) A. A supramolecular complex of the composition [[Rh(2)(O(2)CCF(3))(4)](2)(C(6)H(5))(2)Si(C(5)H(4)N)(2)] (3) has been prepared by reacting the dinuclear units 1 with a potentially bidentate ligand, bis(4'-pyridyl)diphenylsilane, (C(6)H(5))(2)Si(C(5)H(4)N)(2) (L2), having two pyridyl groups rigidly oriented at 109 degrees. In 3, one L2 ligand coordinates two dirhodium molecules 1 through their axial positions with the Rh-N distance of 2.150(5) A. An interesting extended 2D layered motif is formed by additional contacts of open axial positions of dirhodium units with phenyl groups of the neighboring ligands at Rh-C distances which average to 2.88(1) A. A supramolecular compound of the composition [[Rh(2)(O(2)CCF(3))(4)](3)(HO)C(C(5)H(4)N)(3)(eta(1)-C(6)H(6))].(1)/(2)C(6)H(6) (4.(1)/(2)C(6)H(6)) has been formed when linear dirhodium units 1 were reacted with tris(4'-pyridyl)methanol (L3) having tetrahedral directing angles that average to 110 degrees. A building block in the solid structure of 4 is a hexanuclear molecule in which one L3 ligand binds three dimetal units of 1 through N atoms of pyridyl groups at the average Rh-N distance of 2.143(7) A. A unique extended pseudo-3D structure in 4 is created by additional Rh-O coordination bonds as well as by weak metal-arene interactions.     

Hydride transfer reactivity of tetrakis(trimethylphosphine)(hydrido)(nitrosyl)molybdenum(0)

The tetrakis(trimethylphosphine) molybdenum nitrosyl hydrido complex trans-Mo(PMe(3))(4)(H)(NO) (2) and the related deuteride complex trans-Mo(PMe(3))(4)(D)(NO) (2a) were prepared from trans-Mo(PMe(3))(4)(Cl)(NO) (1). From (2)H T(1 min) measurements and solid-state (2)H NMR the bond ionicities of 2a could be determined and were found to be 80.0% and 75.3%, respectively, indicating a very polar Mo--D bond. The enhanced hydridicity of 2 is reflected in its very high propensity to undergo hydride transfer reactions. 2 was thus reacted with acetone, acetophenone, and benzophenone to afford the corresponding alkoxide complexes trans-Mo(NO)(PMe(3))(4)(OCHR'R') (R' = R' = Me (3); R' = Me, R' = Ph (4); R' = R' = Ph (5)). The reaction of 2 with CO(2) led to the formation of the formato-O-complex Mo(NO)(OCHO)(PMe(3))(4) (6). The reaction of with HOSO(2)CF(3) produced the anion coordinated complex Mo(NO)(PMe(3))(4)(OSO(2)CF(3)) (7), and the reaction with [H(Et(2)O)(2)][BAr(F)(4)] with an excess of PMe(3) produced the pentakis(trimethylphosphine) coordinated compound [Mo(NO)(PMe(3))(5)][BAr(F)(4)] (8). Imine insertions into the Mo-H bond of 2 were also accomplished. PhCH[double bond, length as m-dash]NPh (N-benzylideneaniline) and C(10)H(7)CH=NPh (N-1-naphthylideneaniline) afforded the amido compounds Mo(NO)(PMe(3))(4)[NR'(CH(2)R')] (R' = R' = Ph (9), R' = Ph, R' = naphthyl (11)). 9 could not be obtained in pure form, however, its structure was assigned by spectroscopic means. At room temperature 11 reacted further to lose one PMe(3) forming 12 (Mo(NO)PMe(3))(3)[N(Ph)CH(2)C(10)H(6))]) with agostic stabilization. In a subsequent step oxidative addition of the agostic naphthyl C-H bond to the molybdenum centre occurred. Then hydrogen migration took place giving the chelate amine complex Mo(NO)(PMe(3))(3)[NH(Ph)(CH(2)C(10)H(6))] (15). The insertion reaction of 2 with C(10)H(7)N=CHPh led to formation of the agostic compound Mo(NO)(PMe(3))(3)[N(CH(2)Ph)(C(10)H(7))] (10). Based on the knowledge of facile formation of agostic compounds the catalytic hydrogenation of C(10)H(7)N=CHPh and PhN=CHC(10)H(7) with 2 (5 mol%) was tested. The best conversion rates were obtained in the presence of an excess of PMe(3), which were 18.4% and 100% for C(10)H(7)N=CHPh and PhN=CHC(10)H(7), respectively.     

The structure and chemistry of tris(pentafluorophenyl)borane protected mononuclear nitridotitanium complexes

Treatment of TiCl(NMe(2))(3) with H(3)N·B(C(6)F(5))(3) results in N-H activation and ligand exchange to yield the structurally characterised salt [TiCl(NMe(2))(2)(NMe(2)H)(2)](+)[Ti[triple bond]NB(C(6)F(5))(3)(Cl)(2)(NMe(2)H)(2)](-). Cation exchange with [Me(4)N]Cl, [Ph(4)P]Cl and [(PhCH(2))Ph(3)P]Cl yields the respective ammonium and phosphonium salts of the [Ti[triple bond]NB(C(6)F(5))(3)(Cl)(2)(NMe(2)H)(2)](-) anion. X-ray crystallography reveals that the essential trigonal bipyramidal geometry and composition of the anion is retained in each of these salts despite some minor variations in the Ti-N-B angle and the nature of the interionic interactions. Electronic investigation by DFT calculations confirmed the Ti-N triple bond character implied by the experimentally determined bond length, with the HOMO and HOMO-1 having Ti-N π-bonding character. The dimethylamine ligands of the anion resist substitution by moderate bases but can be displaced by pyridine to give a pentacoordinate anion. In contrast, addition of 2,2'-bipyridyl gives a neutral octahedral complex. Treatment of the pyridine complex with TlCp results in the formation of a four coordinate anionic cyclopentadienyl complex.     

Metal-induced coordination inversion and carbon-nitrogen bond rearrangement. Structurally characterized phenyl isocyanate inserted into aluminum methyl compounds and O- and N-bound aluminum compounds

[C(4)H(3)N(CH(2)NMe(2))-2]AlMe(2) (1) is prepared in 88% yield by the reaction of substituted pyrrole [C(4)H(4)N(CH(2)NMe(2))-2] with 1 equiv of AlMe(3) in methylene chloride. Reaction of compound 1 with 1 equiv of phenyl isocyanate in toluene generates a seven-membered cycloaluminum compound [C(4)H(3)N[CH(2)NPh(CONMe(2))]-2] AlMe(2) (2). The phenyl isocyanate was inserted into the aluminum and dimethylamino nitrogen bond and induced an unusual rearrangement which results in C-N bond breaking and formation. A control experiment shows that the reaction of substituted pyrrole [C(4)H(4)N(CH(2)NMe(2))-2] with 1 equiv of phenyl isocyanate in diethyl ether yields a pyrrolyl attached urea derivative [C(4)H(3)N(CH(2)NMe(2))-2-[C(=O)NHPh]-1] (3). The demethanation reaction of AlMe(3) with 1 equiv of 3 in methylene chloride at 0 degrees C afforded O-bounded and N-bounded aluminum dimethyl compounds [C(4)H(3)N(CH(2)NMe(2))-2-[C(=O)NPh]-1]AlMe(2) (4a) and [C(4)H(3)N(CH(2)NMe(2))-2-[CO(=NPh)]-1]AlMe(2) (4b) in a total 78% yield after recrystallization. Both 4a and 4b are observed in (1)H NMR spectra; however, the relative ratio of 4a and 4b depends on the solvent used. Two equivalents of AlMe(3) was reacted with 3 in methylene chloride to yield a dinuclear aluminum compound AlMe(3)[C(4)H(3)N(CH(2)NMe(2))-2-[C(=O)NPh]-1] AlMe(2) (5). Reaction of 5 with another equivalent of ligand 3 results in the re-formation of compounds 4a and 4b.     

Rational assembly of soluble copper(II) phosphonates: synthesis, structure and magnetism of molecular tetranuclear copper(II) phosphonates

The reactions of the dinuclear copper complexes [Cu(2)(L)(OAc)] [H(3)L = N,N'-(2-hydroxypropane-1,3-diyl)bis(salicylaldimine) or [Cu(2)(L')(OAc)] (H(3)L' = N,N'-(2-hydroxypropane-1,3-diyl)bis(4,5-dimethylsalicylaldimine)] with various phosphonic acids, RPO(3)H(2) (R = t-Bu, Ph, c-C(5)H(9), c-C(6)H(11) or 2,4,6-i-Pr(3)-C(6)H(2)), leads to the replacement of the acetate bridge affording tetranuclear copper(II) phosphonates, [Cu(4)(L)(2)(t-BuPO(3))](CH(3)OH)(2)(C(6)H(6)) (1), [Cu(4)(L)(2)(PhPO(3))(H(2)O)(2)(NMe(2)CHO)](H(2)O)(2) (2), [Cu(4)(L')(2)(C(5)H(9)PO(3))](CH(3)OH)(2) (3), [Cu(4)(L')(2)(C(6)H(11)PO(3)](MeOH)(4)(H(2)O)(2) (4) and [Cu(4)(L')(2)(C(30)H(46)P(2)O(5))](PhCH(3)) (5). The molecular structures of 1-4 reveal that a [RPO(3)](2-) ligand is involved in holding the four copper atoms together by a 4.211 coordination mode. In 5, an in situ formed [(RPO(2))(2)O](4-) ligand bridges two pairs of the dinuclear subunits. Magnetic studies on these complexes reveal that the phosphonate ligand is an effective conduit for magnetic interaction among the four copper centers present; a predominantly antiferromagnetic interaction is observed at low temperatures.     

Reactions of Zn bis-ferrocenyl-β-diketiminates with [Ph3C][B(C6F5)4

The ZnMe complexes of bis-ferrocenyl-β-diketiminate ligands are prepared and the reactions with [Ph(3)C][B(C(6)F(5))(4)] are found to yield the salts [H(Ph(3)C)C(MeC(N(C(5)H(4))FeCp)(2)ZnMe] [B(C(6)F(5))(4)] and [CH(2)=C(MeC(N(C(5)H(4))FeCp)(2)ZnMe][B(C(6)F(5))(4)], derived from electrophilic substitution and hydride abstraction.     

Synthetic and structural comparisons of bismuth(III) carboxylates synthesised under solvent-free and reflux conditions

Two synthetic approaches to the formation of bismuth(III) carboxylates have been explored and compared. Ph(3)Bi was reacted with a series of carboxylic acids (RCO(2)H) of varying pK(a) and functionality (R = PhCH[double bond, length as m-dash]CH, o-MeOC(6)H(4), m-MeOC(6)H(4), o-H(2)NC(6)H, o-O(2)NC(6)H(4), p-O(2)NC(6)H(4), 2-(C(5)H(4)N)) under reflux conditions in toluene and solvent-free. The thermochemical profiles of the solvent-free reactions were also studied by DSC-TGA. All reactions produced the tri-substituted bismuth carboxylates in comparable yields and purity with the exceptions of picolinic acid and p-nitrobenzoic acid. 2-Picolinic acid exclusively formed the di-substituted complex, [PhBi(2-(C(5)H(4)N)CO(2))(2)](4), by both methods, while p-nitrobenzoic acid gave the tri-substituted complex through reflux and the di-substituted complex under solvent-free conditions. Two of the complexes were structurally authenticated by single crystal X-ray diffraction: [PhBi(2-(C(5)H(4)N)CO(2))(2)](4) is tetrameric formed through five membered chelate rings involving the pyridyl N and O(-C) rather than the less stable carboxylate (-CO(2)) chelates, while [Bi(o-MeOC(6)H(4)CO(2))(3)](infinity), is a polymer in which dimeric units, constructed around two chelating and one unsymmetrical bridging carboxylate on each Bi centre, are then joined together through longer intermolecular Bi-O bridging bonds.     

An investigation of Staudinger reactions involving cis-1,3,5-triazidocyclohexane and tri(alkylamino)phosphines

The reaction of 1,3,5-cis-triazidocyclohexane with the electron-rich tris(dialkylamino)phosphines P(NMe(2))(3) (1) and N(CH(2)CH(2)NMe)(3)P (2b) in acetonitrile for 3 h furnished the corresponding tris-phosphazides 1,3,5-cis-(R(3)PN(3))(3)C(6)H(9), 3a (R(3)P = 1) and 3b (R(3)P = 2b), in 90% and 92% yields, respectively. The same reaction with the relatively electron-poor tris(dialkylamino)phosphine MeC(CH(2)NMe)(3)P (4) for 2 days gave the tris-iminophosphorane, 1,3,5-cis-(R(3)PN)(3)C(6)H(9), 5a (R(3)P = 4), in 60% yield. Compound 3b is a thermally stable solid that did not lose dinitrogen when refluxed in toluene for 24 h or when heated as a neat sample at 100 degrees C /0.5 Torr for 10 h. By contrast, tris-phosphazide 3a decomposed to the tris-iminophosphorane 1,3,5-cis-(R(3)PN)(3)C(6)H(9), 5b (R(3)P = 1), in 3 h in quantitative yield upon heating to 100 degrees C in toluene. Factors influencing the formation of the phosphazides or the iminophosphoranes in these reactions are discussed. The reaction of 3b with 4 equiv of benzoic acid gave [N(CH(2)CH(2)NMe)(3)P=NH(2)]PhCO(2) ([6bH]PhCO(2)) in quantitative yield along with benzene (56% yield) and dinitrogen. The same reaction with 3a gave [(Me(2)N)(3)P=NH(2)]PhCO(2) ([7aH]PhCO(2)) (quantitative yield), benzene (15% yield), and dinitrogen(.) Treatment of [6bH]PhCO(2) with KO(t)Bu afforded N(CH(2)CH(2)NMe)(3)P=NH (6b) in 40% overall yield. Compound 6b upon treatment with PhCH(2)CH(2)Br produced [6bH]Br in 90% yield along with styrene. The new compounds were characterized by analytical and spectroscopic methods, and selected compounds (3b, 5a, and [6bH]Br) were structured by X-ray crystallography. A special feature of 3b is its capability to function as a starting material for 6b, which was not accessible by other synthetic routes.     

A Search for pi/sigma Equilibria in Chiral Rhenium Imine Complexes of the Formula [(eta(5)-C(5)H(5))Re(NO)(PPh(3))(N(H)=C(CF(3))X)](+)TfO(-): Investigation of Electronic Effects upon the Binding Mode

Reaction of the amido complex (eta(5)-C(5)H(5))Re(NO)(PPh(3))(&Numl;H(2)) (2) and hexafluoroacetone gives the methyleneamido complex (eta(5)-C(5)H(5))Re(NO)(PPh(3))(&Numl;=C(CF(3))(2)) (3, 58%). Addition of TfOH to 3 yields the sigma-imine complex [(eta(5)-C(5)H(5))Re(NO)(PPh(3))(eta(1)-N(H)=C(CF(3))(2))](+)TfO(-) (4, 96%). Similar reactions of 2 with trifluoroacetaldehyde and then TfOH give the sigma-imine complex [(eta(5)-C(5)H(5))Re(NO)(PPh(3))(eta(1)-N(H)=C(CF(3))H)](+)TfO(-) (5, 78%) and sometimes small amounts of the corresponding pi-trifluoroacetaldehyde complex. Reaction of 5 and t-BuO(-)K(+) gives the methyleneamido complex (eta(5)-C(5)H(5))Re(NO)(PPh(3))(&Numl;=C(CF(3))H) (6, 82%). The IR and NMR properties of 3-6 are studied in detail. The (13)C NMR spectra show C=N signals (157-142 ppm) diagnostic of sigma-binding modes. No evidence is observed for pi isomers of 4 or 5. Analogous O=C(CF(3))X complexes give exclusively pi isomers, and rationales are discussed. Reactions of 3or 6 with MeOTf and heteroatom electrophiles are also described.