Preferential Solvation in Aqueous–Organic Mixed Solvents Using Solvatochromic Indicators

Solvatochromism of the twisted intramolecular charge-transfer (TICT) fluorescence of 4-(N,N-dimethylamino)benzonitrile (DMABN) in pure water, methanol, ethanol, 1-propanol, 2-propanol, acetone, acetonitrile, and in the corresponding aqueous–organic binary mixed solvents was systematically studied and an empirical solvent polarity scale (F _B) based on the DMABN solvatochromism was defined. The F _B parameters of the explored binary mixed solvents as a function of solvent composition were analyzed by a stepwise solvent-exchange (SSE) model to clarify the preferential solvation (PS) of the probe dye in these binary mixed solvents. Solvation diagrams toward DMABN in the mixed solvents, i.e., the local solvent composition in the solvation shell of DMABN molecules was depicted as a function of bulk solvent composition to visualize the PS in these mixed solvents. For comparison, a similar PS analysis was applied to the solvatochromism of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1- yl)phenolate (ET-30) and pyrene (Py) in these mixed solvents; the responsive PS pattern of the mixed solvents toward the specific indicator dye of DMABN, ET-30, and Py was then discussed in terms of the chemical properties of the probe dye, the properties of the mixed solvents, and the solute–solvent and solvent–solvent interactions.     

Trans-effect in the kinetics of reactions of mixed Cu(II) acetate solvates with N-methyloctaethylporphine

The kinetics of complex formation reaction of N-substituted octaethylporphine (H(N-Me)(β-Et)₈P] with copper(II) acetate in individual and mixed solvents based on DMSO, DMF, and Py is studied by spectrophotometry. An increase in the complex formation rate of this porphyrin with CuAc₂ in mixed solvents is explained in terms of the trans-effect of the ligands in the solvate sphere of the salt.     

The Stabilities of the o-Carboxyphenylhydrazo-Ethylacetoacetate OF Cu,Ni, Co,Zn, Mn and Cd Chelate Compounds in Different Solvents

The dissociation constants for o-carboxyphenylhydrazoethylacetoacetate (o-CPHEA) ligand, as well as the stability constants for the divalent metal complexes of Cu, (II), Ni (II), Co (II), Zn (II)and Cd (II) ions, have been calculated pH-meterically in different solvents. The dissociation constans pK₁=4.10 and pK₂=10.55 of the insoluble organic ligand are calculated in aqueous medium. The effect of solvents, the relation between stabilities and both electronegativities and ionization potential are studied.     

Analysis of Solvent–Solvent Interactions in Mixed Isosteric Solvents by Inverse Gas Chromatography

The Flory–Huggins interaction parameter, χ ₂₃, characterizing the interaction between solvents in a mixed stationary phase has been calculated using inverse gas chromatography (IGC). The χ ₂₃ parameters for four mixed solvent systems formed by mixing a non-polar branched alkane, 19, 24-dioctadecyldotetracontane (C78), with four different polar solvents are analysed as a function of temperature. Two of the polar solvents are formed by replacing one of the –CH₃ groups of C78 by –OH (POH) group and –CN (PCN) group and the other two polar solvents are formed by replacing all the four –CH₃ groups of C78 by four –CF₃ (TTF) groups and four –OCH₃ (TMO) groups. The five solvents have similar structures and nearly the same molar volume and in mixtures, they form regular solutions. For the mixture, C78 + POH, χ ₂₃ was calculated at two compositions and for the remaining three mixtures χ ₂₃ was calculated at equimolar composition. Eight solute probes representing all possible chemical structures and polarity were used under conditions approaching infinite dilution. The effects of temperature, concentration of the mixed solvent and probe solute on χ ₂₃ are presented and discussed. The probe-independent χ ₂₃ values were also calculated by linear regression analysis using the retention data of all the solute probes. In all the mixed solvents considered here the χ ₂₃ values are probe-dependent and decrease with increase of temperature.     

Solvatochromism in Binary Solvent Mixtures by Means of a Penta‐tert‐butyl Pyridinium N‐Phenolate Betaine Dye

The solvatochromic behavior of a penta‐tert‐butyl prydinium N‐phenolate betaine dye was studied using UV‐visible spectrophotometry in several binary mixture solvents. The solvent polarity parameter, E_T (1) (kcal. mol^?1) was calculated from the position of the longest‐wavelength intramolecular charge transfer absorption band of this penta‐tert‐butyl betaine dye. For binary solvent mixtures, all plots of E_T (1) versus the mole fraction of a more polar component are nonlinear owing to preferential solvation of the probe by one component of the binary solvent mixture. In the computation of E_T (1) it was assumed that the two solvents mixed interact to form a common structure with an E_T (1) value not always intermediate between those of the two solvents mixed. The results obtained are explained by the strong synergism observed for some of the binary mixtures with strong hydrogen bond donors (HBD) solvents such as alcohols.     

Thermodynamic Studies on the Complexation Reactions of Copper(II) Complex of o2n2-Donor Macrocycle with Halide and Pseudohalide Ions

Complexation reactions of 5,6,7,8,9,10,16,17-octahydrodibenzo[e, m][1, 4]dioxa-[8, 11]diazacyclotetradecine-copper(II) complex with halide and pseudohalide ions have been studied at 25.0° in three water-methanol mixed solvents by spectro-photometric method. It is found that the equilibrium constants increases in the order of 50 vol.% CH₃OH<75 vol.% CH₃OH<95 vol.% CH₃OH for solvents and I-<Br^?<CI^?<SCN^?, N^?₃ for anions.     

Selective polymeric effects on solvent NMR relaxations

Measurements of the spin-lattice relaxation times (T₁) of solvent protons have been performed on systems containing mixed solvents with and without polymer. It has been found that the motion of solvent is selectively affected by polymers present in the system. Polyisobutylene (10%) in mixed solvents of carbon tetrachloride (or cyclohexane) and dichloromethane at various proportions produces little effect on T₁ values of dichloromethane, but it affects significantly the T₁ values of cyclohexane; whereas poly(methyl methacrylate) (10%) in carbon tetrachloride and dichloromethane (or acetone) selectively associates with dichloromethane (or acetone), resulting in an approximate 50% reduction of the T₁ values for dichloromethane (or acetone). In systems of poly(methyl methacrylate) and three mixed solvents of carbon tetrachloride, dichloromethane, and cyclohexane, the polymer (10%) has a negligible effect on the T₁ values of cyclohexane, but brings about a 50% reduction of the T₁ values of dichloromethane. These phenomena are discussed in terms of local selective interactions between the solvent molecules and the polymeric chain segments.     

Preparation of a new hydrophilic copolymer from poly(α-hydroxyacrylic acid)

A new hydrophilic copolymer containing α-hydroxy allyl alcohol segments was prepared by reducing poly(α-hydroxyacrylic acid) (PHA) with NaBH₄ in water and mixed solvents of methanol and polar solvents. Conversion to the desired allyl alcohol group in the resultant polymers was confirmed with ICP, FT-IR, and ¹³C NMR spectroscopies. The degree of conversion was as low as 5% for PHA reduced in aqueous solution, while for those reduced in the mixed solvents it was significant (ca. 60–70%).     

Catalytic action of metallic salts in autoxidation and polymerization. IX. Polymerization of methyl methacrylate with sodium hexanitrocobaltate(III) in mixed solvent of acetone and water

Polymerization of methyl methacrylate with some cobalt (III) complexes was carried out in various solvents and in mixed solvents of acetone and water or alcohols. Sodium hexanitrocobaltate(III) was found to be an effective initiator in mixed solvent of water and acetone. The kinetic study on the polymerization of methyl methacrylate with Na₃[Co(NO₂)₆] in a water-acetone mixed solvent gave the following over-all rate equation: R_p = 8.04 × 10⁴ exp{ ?13,500/RT} [I]^1/2[M]² (mol/1.?sec). The effects of various additives on polymerization rate and the copolymerization curve with styrene suggest that polymerization proceeds via a radical mechanism. The dependence of the polymerization rate on the square of monomer concentration and the spectroscopic data were indicative of the formation of a complex between initiator and monomer.     

Solubilities of the Silver Halides in Aqueous Mixtures of Methanol, Acetonitrile, and Dimethylsulfoxide

 The solubilities of the silver halides in three non-aqueous solvents: methanol, acetonitrile, and dimethylsulfoxide, and in their aqueous mixtures, are reviewed. Values for the solubility product, K _SO , the enthalpies of solution, Δ _sol H ^o , and the equilibrium products for AgX ⁽ⁱ⁻¹⁾⁻ _i silver halide complexes, β _i , are listed and, where possible, compared. The solvent systems provide examples for three types of mixed aqueous solvent system: aqueous alcohol mixtures and aqueous mixtures with dipolar aprotic solvents that are weakly or strongly basic. The experimental data are discussed in terms of the solvation of the silver and halide ions in the mixed solvents.     

Equilibria in complexes ofN-heterocyclic molecules,part X. The pH dependent racemization of tris-(1,10-phenanthroline)nickel(II)

Summary Circular dichroism and electronic spectral measurements have established the existence of a covalent hydrate and a pseudobase arising from attack of H₂O or HO^– at the ligand in tris-(1,10-phenanthroline)nickel(II). In anhydrous solvents and strongly acidic solution, the complex is largely unsolvated. Over a large pH range the dominant species present in aqueous solution is the covalent hydrate while at high pH, this is converted into the pseudo-base. The existence of these species, and the equilibria between them in aqueous solution elegantly explains the pH dependent dissociation and racemization of the parent molecule. It further explains the non-linear variation of these reactions in mixed solvents and indicates that more than one mechanism is responsible over the range of solvents studied here and previously.Part IX,Transition Met. Chem., 2, 12 (1977).This ready change was pointed out to one of us (R.D.G.) some years ago by Professor B. Bosnich.     

Effects of mixed aqueous‐organic solvents on the rate of intramolecular carboxylic group‐catalyzed cleavage of N‐(4′‐methoxyphenyl)phthalamic acid

Kinetic study on the cleavage of N‐(4′‐methoxyphenyl)phthalamic acid (NMPPAH) in mixed H₂O‐CH₃CN and H₂O‐1,4‐dioxan solvents containing 0.05 M HCl reveals the formation of phthalic anhydride (PAn)/phthalic acid (PA) as the sole or major product. Pseudo first‐order rate constants (k₁) for the conversion of NMPPAH to PAn decrease nonlinearly from 60.4 × 10^?5 to 2.64 × 10^?5 s^?1 with the increase in the contents of 1,4‐dioxan from 10 to 80% v/v in mixed aqueous solvents. The rate of cleavage of NMPPAH in mixed H₂O‐CH₃CN solvents at ≥50% v/v CH₃CN follows an irreversible consecutive reaction path: NMPPAH PA. The values of k₁ are larger in H₂O‐CH₃CN than in H₂O‐1,4‐dioxan solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 316–325, 2004     

Effects of mixed CH3CN(SINGLEBOND)H2O solvents on rate of intramolecular general base-catalyzed cleavage of ionized phenyl salicylate in the presence of 3-aminopropan-1-ol, 1,2-diaminoethane,and glycine

The effects of mixed CH₃CN(SINGLEBOND)H₂O solvents on rates of aminolysis of ionized phenyl salicylate, PS⁻, reveal a nonlinear decrease in the nucleophilic second-order rate constants, k_n^ms, (for aminolysis) with increase in the content of CH₃CN until it becomes ∼50%, v/v. The values of k_n^ms remain almost unchanged with change in the CH₃CN content within 50 to 70 or 80%, v/v. The effects of mixed CH₃CN(SINGLEBOND)H₂O solvents on pK_a of leaving group, phenol, and protonated amine nucleophile have been concluded to be the major source for the observed mixed solvent effects on k_n^ms. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 301–307, 1998.     

Solvation of iron and chromium complexes in alcohol–water mixtures

Solubilities are reported for the perchlorates of five iron(II)-diimine complexes in t-BuOH–H₂O and one in MeOH–H₂O mixtures, for three iron(III)-3-hydroxy-4-pyranonate and three iron(III)-3-hydroxy-4-pyridinonate complexes in MeOH–H₂O and t-BuOH–H₂O, and for two chromium(III)-3-hydroxy-4-pyranonate complexes in MeOH–H₂O. Transfer chemical potentials are thence derived for the various iron(II), iron(III) and chromium(III) complexes, for transfer from H₂O into the respective mixed solvents (at 298.2 K). These results are combined with values reported earlier for related complexes, and for other alcohol–H₂O mixtures, to give an overall picture of solvation, expressed in the thermodynamic format of transfer chemical potentials, for iron(II)-diimine, iron(III)-3-hydroxy-4-pyridinonate and chromium(III)-3-hydroxy-4-pyranonate complexes in H₂O-rich aqueous-alcohol mixtures. Some spectroscopic (¹H-n.m.r.; i.r.) and kinetic (aquation rate constants at 298.2 K) data are reported for the chromium(III) complexes.     

Solubilities of the Silver Halides in Aqueous Mixtures of Methanol,Acetonitrile, and Dimethylsulfoxide

Summary.  The solubilities of the silver halides in three non-aqueous solvents: methanol, acetonitrile, and dimethylsulfoxide, and in their aqueous mixtures, are reviewed. Values for the solubility product, K _SO , the enthalpies of solution, Δ _sol H ^o , and the equilibrium products for AgX ⁽ⁱ⁻¹⁾⁻ _i silver halide complexes, β _i , are listed and, where possible, compared. The solvent systems provide examples for three types of mixed aqueous solvent system: aqueous alcohol mixtures and aqueous mixtures with dipolar aprotic solvents that are weakly or strongly basic. The experimental data are discussed in terms of the solvation of the silver and halide ions in the mixed solvents. E-mail: Earle.Waghorne@ucd.ie Received September 30, 2002; accepted October 29, 2002 Published online April 7, 2003 RID="a" ID="a" Dedicated to Prof. Heinz Gamsj?ger on the occasion of his seventieth birthday     

Study of Complex Formation Between Dicyclohexano-18-Crown-6 (DCH18C6) with Mg 2+, Ca2+, Sr 2+, and Ba2+ Cations in Methanol–Water Binary Mixtures Using Conductometric Method

The complexation reactions between Mg²⁺,Ca²⁺,Sr²⁺ and Ba²⁺ metal cations with macrocyclic ligand, dicyclohexano-18-crown-6 (DCH18C6) were studied in methanol (MeOH)–water (H₂O) binary mixtures at different temperatures using conductometric method . In all cases, DCH18C6 forms 1:1 complexes with these metal cations. The values of stability constants of complexes which were obtained from conductometric data show that the stability of complexes is affected by the nature and composition of the mixed solvents. While the variation of stability constants of DCH18C6-Sr ²⁺ and DCH18C6-Ba²⁺versus the composition of MeOH–H₂O mixed solvents is monotonic, an anomalous behavior was observed for variations of stability constants of DCH18C6-Mg²⁺ and DCH18C6-Ca²⁺ versus the composition of the mixed solvents. The values of thermodynamic parameters (ΔH_c°, ΔS_c°) for complexation reactions were obtained from temperature dependence of formation constants of complexes using the van’t Hoff plots. The results show that in most cases, the complexation reactions are enthalpy stabilized but entropy destabilized and the values of thermodynamic parameters are influenced by the nature and composition of the mixed solvents. The obtained results show that the order of selectivity of DCH18C6 ligand for metal cations in different concentrations of methanol in MeOH–H₂O binary system is: Ba²⁺>Sr²⁺>Ca²⁺> Mg²⁺.     

溶剂热法制备立方状ITO粉体及其电性能

以乙二醇、乙醇为溶剂通过溶剂热法制备出立方状ITO纳米粉体,研究了反应时间、NaOH浓度对ITO纳米粉体形貌的影响,并讨论了溶剂体积比、NaOH浓度对ITO粉体导电性的影响及机理。结果表明：采用乙二醇与乙醇做溶剂,V_EG：V_EtOH=4：1时,制备出分散性良好的立方状ITO纳米粉体,平均粒径为10.7 nm,且其XRD衍射峰强度比I₄₀₀/I₂₂₂最高为0.380;乙二醇与乙醇做溶剂,V_EG：V_EtOH=4：1,且NaOH浓度为0.275 mol·L^-1时,粉体电导率最高为46.75 mS·cm^-1。     

NMR studies of transformations of Pt(II) and Pd(II) complexes with amino acids in solution. 1. Glycine complexes

¹H,¹³C, and¹⁹⁵Pt NMR studies were performed for Pt(ll) and Pd(II) complexes with glycine cis- and trans-M(Gly)₂, trans-Pd(GlyH)₂Cl₂ , cis- and trans-Pt(GlyH)₂Cl₂ , Na[Pd(GIy)Cl₂], and K[Pt(Gly)CI₂] in donor type solvents DMSO and H₂O. It is shown that a cis ↔ trans equilibrium takes place in these solvents and that the equilibration rate is low for Pt(II) complexes and high for Pd(II) complexes. Therefore, the cis- and trans-complexes of Pt(II) may be recorded by NMR spectroscopy in the individual state, whereas for Pd(II) there is an equilibrium mixture of cis- and trans-isomers. Solvolysis of Cl-containing complexes in DMSO is studied. A mechanism of solvolysis involving eis ↔ trans isomerization of the dichloro complexes of Pd(II) is suggested. NMR spectral data for some solvolysis products are given. Translated fromZhurnal Strukturnoi Khimii, Vol. 41, No. 2, pp. 300–311, March–April, 2000.     

溶剂热法制备立方状ITO粉体及其电性能

以乙二醇、乙醇为溶剂通过溶剂热法制备出立方状ITO纳米粉体,研究了反应时间、NaOH浓度对ITO纳米粉体形貌的影响,并讨论了溶剂体积比、NaOH浓度对ITO粉体导电性的影响及机理。结果表明:采用乙二醇与乙醇做溶剂,V_(EG)∶V_(EtOH)=4∶1时,制备出分散性良好的立方状ITO纳米粉体,平均粒径为10.7 nm,且其XRD衍射峰强度比I_(400)/I_(222)最高为0.380;乙二醇与乙醇做溶剂,V_(EG)∶V_(EtOH)=4∶1,且NaOH浓度为0.275 mol·L~(-1)时,粉体电导率最高为46.75 mS·cm~(-1)。     

Complexes of Cobalt(II), Nickel(II) and Copper(II) Chloroacetates with Quinoline N-Oxide

Some 1:1 and 1:2 adducts of cobalt(II), nickel(II) and copper(II) chloroacetates with quinoline N -oxide have been isolated by the interaction of the appropriate metal chloroacetate with quinoline N -oxide (QuinNo). The complexes isolated are of 1:1 stoichiometry of formula [M(CH₃_xClxCOO)₂QuinNO] (when M=Co(II), Ni(II); X=1,2 and 3 and when M=Cu(II), X=l and 2) except copper(II) trichloroacetate which yields an adduct of 1:2 stoichiometry of formula[Cu(CCI₃COO)₂(QuinNO)₂]. The adducts isolated are soluble in common organic solvents.