Comparison study of adsorption of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions from dimethyl formamide on In-Ga and Tl-Ga electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions on the renewable liquid In-Ga and Tl-Ga electrodes from 0.1 M solutions in dimethyl formamide (DMF) is investigated by using the method of differential capacitance measurements. The results are compared with similar data obtained on Hg and Ga electrodes in DMF and with the corresponding data obtained in acetonitrile (AN). It is shown that, in DMF, the adsorption parameters and the series of surface activity of halide ions (Hal⁻) significantly depend on the metal nature. In contrast to Hg electrode, on which the surface activity of halide ions increases in the series: Cl⁻ < Br⁻ < I⁻, on In-Ga, as well as on the Ga electrode, it varies in the reverse order: I⁻ < Br⁻ < Cl⁻, whereas on the Tl-Ga electrode, partially reversed series of surface activity is observed: Br⁻ < I⁻ < Cl⁻. The results are explained within the framework of Andersen-Bockris model. An analysis of experimental results leads to the following qualitative conclusions: (1) on the In-Ga and Tl-Ga electrodes, as well as on Ga electrode, free energy of metal-Hal⁻ interaction ( $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) increases in series I⁻ < Br⁻ < Cl⁻; (2) for Cl⁻, Br⁻, and I⁻, $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) grows in series Tl-Ga < In-Ga < Ga; (3) an absolute magnitude of $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } (Hal₁⁻, and Hal₂⁻ are any ions of Cl⁻, Br⁻, and I⁻) increases in series Hg < Tl-Ga < In-Ga < Ga; (4) the metal-DMF chemisorption interaction is much stronger than the metal-AN interaction and increases in series Tl-Ga < In-Ga < Ga.     

Adsorption of Cl<Superscript>−</Superscript> ions on γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> oxide from nitrate solutions

The adsorption of chloride ions on γ-Fe₂O₃ oxide (maggemite) from nitrate solution is studied using the method of potentiometric titration and an ion-selective electrode. The specific character of adsorption is determined. It is shown that the maggemite surface coverage with Cl^? ions increases with increasing concentration of ions in the solution, decreasing pH value, and increasing potential. The adsorbability of ions changes drastically in the pH range about pH₀ (γ-Fe₂O₃)6.2. It is found that the adsorption of chloride ions from neutral nitrate solution exponentially increases in the potential range from 0.1 to 1.0 V. The type of adsorption isotherm and the adsorption parameters are determined. It is found that, in the absence of external polarization, the concentration dependences of adsorption of Cl^? ions are complex-shaped, and their initial portions are described by the Langmuir isotherm. Further increase of adsorption is explained by the penetration of Cl^? ions inwards the oxide.     

Structural investigation of salts containing ions [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>]<Superscript>2+</Superscript> and [IrF<Subscript>6</Subscript>]<Superscript>2–</Superscript>

Double complex salts (DCS) α-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/m, a = 6.3181(3) Å, b = 10.8718(5) Å, с = 7.4526(4) Å, β = 103.568(2)°), β-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/с, a = 8.5773(3) Å, b = 10.8791(4) Å, с = = 12.6741(3) Å, β = 122.497(2)°), [Pd(NH₃)₄]₃[IrF₆]₂Cl₂·H₂O (P-1, a = 7.6080(2) Å, b = 7.6274(2) Å, с = 11.8070(3) Å, β = 122.497(2)°), and [Pd(NH₃)₄]₂[IrF₆]NO₃ (Fm-3m, a = 11.21210(10) Å) have been synthesized and structurally characterized for the first time. The existence of polymorphs for the DCS has been revealed. The influence of the chemical composition of the initial reagents on the reaction course and, respectively, the products, has been demonstrated. A hypothesis on the influence of the second coordination sphere on the formation of one or the other polymorph of the DCS has been suggested. It has been shown that the series α-[Pd(NH₃)₄][МF₆]·H₂O (M = Pt, Pd) exhibits isostructurality.     

The effect of NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack> and OH<Superscript>−</Superscript> ions on the laser ablation of Cs<Superscript>+</Superscript> ion on Type 304 stainless steel

Type 304 stainless steel specimens artificially contaminated with CsCl solution were treated with KOH solution and KNO₃ solution, respectively. Cs⁺ ion removal tests by a Q-switched Nd:YAG laser at 1064 nm at a given fluence of 57.3 J/cm² were performed. The surface morphology and the relative atomic mole ratio of the specimen surface were investigated by SEM and EPMA. The order of Cs⁺ ion removal efficiency of laser was no-treatment < KOH < KNO₃ during the 42 shots. From the investigation of XPS peaks around 532.7 and 292.9 eV, KNO₃ on a surface of specimen was found to be fully decomposed during the laser irradiation. It was suggested that Cs₂O particulates formed by the reaction between the reactive oxygen generated from the nitrate ion and Cs⁺ ion on the metal surface could be easily suspended. For the KOH system, FeOOH was formed during the laser irradiation and it changed into Fe₂O₃. It was also suggested that Cs₂O particulates were formed by the reaction between the reactive oxygen generated from the decomposition of K₂O and Cs⁺ ion on the metal surface..     

High-temperature reactions in the Co<Subscript>3</Subscript>Cr<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>6</Subscript>–Cr(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> system

A new dichromium(III) cobalt(II) diphosphate(V) of the formula CoCr₂(P₂O₇)₂ was detected in the Co₃Cr₄(PO₄)₆–Cr(PO₃)₃ system. The new compound was obtained as a result of high-temperature solid-state reactions between CoCO₃, Cr₂O₃ and (NH₄)₂HPO₄ as well as between Cr(PO₃)₃ and Co₃Cr₄(PO₄)₆. CoCr₂(P₂O₇)₂ was characterized using XRD, DTA and IR methods. Results demonstrated that CoCr₂(P₂O₇)₂ crystallizes in the triclinic system and its unit cell parameters were calculated. Its infrared spectrum was presented. CoCr₂(P₂O₇)₂ melts incongruently at 1270±10 °C with a formation of solid α-CrPO₄. The compound Co₃Cr₄(PO₄)₆, component of the system under study, was obtained for the first time as a pure phase. Its thermal stability was also investigated. Co₃Cr₄(PO₄)₆ is stable in air up to 1410 ± 20 °C.     

Study on the thermal behavior of the complexes of the type [PdX<Subscript>2</Subscript>(tdmPz)] (X = Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, I<Superscript>−</Superscript>, SCN<Superscript>−</Superscript>)

Four new mononuclear Pd(II) complexes of the type [PdX₂(tdmPz)] {X = Cl⁻ (1); Br⁻ (2); I⁻ (3); SCN⁻ (4); tdmPz = 1-thiocarbamoyl-3,5-dimethylpyrazole} have been synthesized and characterized by elemental analysis, IR spectroscopy, ¹H and ¹³C{¹H}-NMR experiments. The thermal behavior of the complexes 1–4 has been investigated by means of thermogravimetry (TG) and differential thermal analysis (DTA). From the initial decomposition temperatures, the thermal stability of the complexes can be ordered in the sequence: 3 < 4 ≡ 2 < 1. The final products of the thermal decompositions were characterized as metallic palladium by X-ray powder diffraction.     

Interactions between AuCl<Subscript>4</Subscript><Superscript>−</Superscript> and CTA<Superscript>+</Superscript> ions in water

The solubility of hexadecyltrimethylammonium tetrachloroaurate (CTA·AuCl₄) in water was measured at different temperatures of 288.2, 293.2, 298.2, 303.2, and 308.2 K. The enthalpy change associated with the formation of the CTA·AuCl₄ precipitate was estimated on the basis of the van’t Hoff equation and was found to be −42.5 ± 2.8 kJ mol⁻¹ at 298.2 K. The calorimetric enthalpy change for the CTA·AuCl₄ precipitate formation was directly determined by isothermal titration calorimetry performed at 298.2 K and was found to agree well with that estimated from the van’t Hoff equation.     

Comparative study of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions adsorption from dimethyl formamide at Hg- and Ga-electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions from their 0.1 M solutions in dimethyl formamide at renewable liquid Hg- and Ga-electrodes was studied under similar experimental conditions by the differential-capacitance and jet-electrode methods. The data obtained points out to a strong effect of the metal nature on adsorption parameters and the halogenide-ion surface activity series. The halogenide-ion surface activity at the Hg-electrode increased in the following sequence: Cl⁻ < Br⁻ < I⁻; at the Ga-electrode, in the reverse sequence: I⁻ < Br⁻ < Cl⁻. The results are explained qualitatively in terms of the Andersen-Bockris model. It follows from the obtained data that (1) the free energy of the metal-halogenide-ion interaction increases in the following sequence: I⁻ < Br⁻ < Cl⁻; (2) the free energy of the Ga-halogenide-ion interaction exceeds that of the Hg⁻halogenide-ion interaction; and (3) the difference of the Cl⁻, Br⁻, and I⁻ ions interaction with the metals increased significantly when passing from Hg⁻ to Ga-electrode.     

Sb(III) fluoride complexes with DL-valine. Crystal structure of molecular complex SbF<Subscript>3</Subscript>{(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>CHCH(<Superscript>+</Superscript>NH<Subscript>3</Subscript>)COO<Superscript>−</Superscript>}

Preparative method in combination with X-ray diffraction and IR spectroscopy is used to study reaction of Sb(III) fluoride with -aminoisovaleric acid (DL-valine) in an aqueous solution in the range of the molar ratios of components (0.25–2) : 1 in the presence of hydrofluoric acid. The molecular complex of Sb(III) fluoride with valine (1 : 1) of the composition SbF₃{(CH₃)₂CHCH(⁺NH₃)COO^–}(I) and valinium tetrafluoro-antimonate(III) monohydrate {(CH₃)₂CHCH(₊NH₃)COOH}SbF₄· H₂O (II) are synthesized for the first time. Crystal structure was determined for the molecular complex I consisting of SbF₃ groups and valine molecules united into polymer chains through bidentate bridging carboxylate groups of amino acid molecules.Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 2, 2005, pp. 125–131.Original Russian Text Copyright © 2005 by Zemnukhova, Davidovich, Udovenko, Kovaleva.     

Thermal analysis of the (Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1−x</Subscript>(Y<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>x</Subscript> pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new ecological inorganic pigments. Chemical compounds of the (Bi₂O₃)_1−x(Y₂O₃)_x type were synthesized. The host lattice of these pigments is Bi₂O₃ that is doped by Y³⁺ ions. The incorporation of doped ions provides the interesting colours and contributes to a growth of the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. This paper also contains the results of the pigment characterization by X-ray powder diffraction and their colour properties.     

Computational studies of the interactions of I<Superscript>−</Superscript> and I<Subscript>3</Subscript><Superscript>−</Superscript> with TiO<Subscript>2</Subscript> clusters: implications for dye-sensitized solar cells

Abstract  

First principle density-functional theory calculations have been carried out on the interaction of I⁻ and I₃ ⁻ with TiO₂ anatase surfaces, modeled by finite clusters that range in size from 48 to 180 atoms. The total energy per TiO₂ unit and the HOMO-LUMO gaps decrease with increasing the size of the clusters. Both redox species (I⁻ and I₃ ⁻) are strongly adsorbed on the TiO₂ surface with the adsorbtion of I⁻ being stronger. Adsorption of triiodide leads to its dissociation. The positions of the HOMO and LUMO of the adsorbed systems shift negatively from their respective cluster values. Solvation effects have been modeled using the CPCM model. Introducing solvent reduces the shifting of HOMO and LUMO. Implications for dye-sensitized solar cells (DSSC) are discussed. Both the HOMO-LUMO shifting and the strong adsorption might affect the performance of the cell.     

Structures of the complex ions [CuCl<Subscript>4</Subscript>]<Superscript>2−</Superscript> and [CuCl<Subscript>5</Subscript>]<Superscript>3−</Superscript>

The electronic structures of the complex ions [CuCl₄]^2? and [CuCl₅]^3? were analyzed in terms of the extended angular overlap model (AOM) with consideration to sd and pd mixing. The total antibonding orbital energies of these ions show no anomalies in the transition from a tetrahedron to a planar square [CuCl₄]^2? and from a trigonal bipyramid to a tetragonal pyramid [CuCl₅]^3?. Presumably, the existence of numerous intermediate forms of these complexes is mainly due to the packing effects rather than the electronic factors.     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Gas-phase observation of the heterolytic dissociation of negative ions into counter ions: Dissociation of [Cu phthalocyanine (SO<Subscript>3</Subscript>)<Subscript>4</Subscript>Na]<Superscript>3−</Superscript>.

Ion pair formation proceeding in solution at room-temperature, where it is driven by energies of solvation, has been observed in the gas-phase in the collision-induced dissociation of [Cu phthalocyanine (SO3)4Na]3- and [Cu phthalocyanine (SO3)4Na2]2- at low energies. The gas-phase observation of these charge separations into positive and negative ions, seemingly counter-intuitive, is favored sufficiently by thermodynamics to proceed at low collision energies. The combination of a high stability of the negative product anion against electron detachment and a low recombination energy of the departing positive counter ion appears to be the key requirement for such dissociations to proceed at low energies in the gas-phase.     

Identification of Anionic Supramolecular Complexes of Sulfonamide Receptors with Cl<Superscript>−</Superscript>, NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> by APCI-MS

As part of a mass spectrometric investigation of the binding properties of sulfonamide anion receptors, an atmospheric pressure chemical ionization mass spectrometric (APCI-MS) method involving direct infusion followed by thermal desorption was employed for identification of anionic supramolecular complexes in dichloromethane (CH₂Cl₂). Specifically, the dansylamide derivative of tris(2-aminoethyl)amine (tren) (1), the chiral 1,3-benzenesulfonamide derivatives of (1R,2S)-(+)-cis-1-amino-2-indanol (2), and (R)-(+)-bornylamine, (3), were shown to bind halide and nitrate ions in the presence of (n−Bu)₄N⁺X⁻ (X⁻ = Cl⁻, NO₃⁻, Br⁻, I⁻). Solutions of receptors and anions in CH₂Cl₂ were combined to form the anionic supramolecular complexes, which were subsequently introduced into the mass spectrometer via direct infusion followed by thermal desorption. The anionic supramolecular complexes [M+X]⁻, (M=1–3, X⁻=Cl⁻, NO₃⁻, Br⁻, I⁻) were observed in negative mode APCI-MS along with the deprotonated receptors [M−H]⁻. Full ionization energy of the APCI corona pin (4.5 kV) was necessary for obtaining mass spectra with the best signal-to-noise ratios.     

Thermogravimetric analysis of wheatleyite Na<Subscript>2</Subscript>Cu<Superscript>2+</Superscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>·2H<Subscript>2</Subscript>O

Evidence for the existence of primitive life forms such as lichens and fungi can be based upon the formation of oxalates. These oxalates form as a film like deposit on rocks and other host matrices. The anhydrous oxalate mineral moolooite CuC₂O₄ as the natural copper(II) oxalate mineral is a classic example. Another example of a natural oxalate is the mineral wheatleyite Na₂Cu²⁺(C₂O₄)₂·2H₂O. High resolution thermogravimetry coupled to evolved gas mass spectrometry shows decomposition of wheatleyite at 255°C. Two higher temperature mass losses are observed at 324 and 349°C. Higher temperature mass losses are observed at 819, 833 and 857°C. These mass losses as confirmed by mass spectrometry are attributed to the decomposition of tennerite CuO. In comparison the thermal decomposition of moolooite takes place at 260°C. Evolved gas mass spectrometry for moolooite shows the gas lost at this temperature is carbon dioxide. No water evolution was observed, thus indicating the moolooite is the anhydrous copper(II) oxalate as compared to the synthetic compound which is the dihydrate.     

Study on nonlinear kinetic and thermodynamics of oscillating reaction of amino Acid-BrO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>-Mn<Superscript>2+</Superscript>-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-acetone system

With the help of the kinetic parameters (the rate constant (k _in k _p) and the apparent activation energy (E _in E _p) of the oscillatory induction period and oscillation period) of the oscillating reaction using thirteen amino acids, leucine (Leu), threonine (Thr), arginine (Arg), lysine (Lys), histidine (His), alanine (Ala), glutamine (Glu), glycine (Gly), methionine (Met), cystine (Cys), tryptophan (Trp), serine (Ser) and tyrosine (Tyr), as organic substrates in amino acid-BrO₃⁻-Mn²⁺-H₂SO₄-acetone system, then based on the Oregonator model and the thermodynamics theory on irreversible process, the thermodynamic function (ΔH _in, ΔG _in, ΔS _in and ΔH _p, ΔG _p, ΔS _p) of these oscillating system are studied. The results indicate the entropy ΔS of these oscillating reaction are negative, thereby it is proved that the oscillating reaction is a noequilibrium system with dissipation structure in agreement with the character of the oscillating reaction from disorder to order in irreversible thermodynamics. These are satisfactorily to explain the experimental phenomena.     

Comparison of the Temperature Effect on the π∗←n and π∗←π Electronic Transition Bands of NO<Subscript>3</Subscript><Superscript>−</Superscript>(aq)

The effect of temperature on the π∗←π transition band in the UV absorption spectrum of NO₃⁻(aq) centered at ≈200 nm was studied in the temperature range 10–70 ^∘C. The observed temperature independence of this band was in contrast to the significant influence of temperature on the nitrate π∗←n transition reported recently by us. However, taking into account the electronic states involved in both the transitions, it was concluded that this finding was in accordance with our previous assumption that interconversion between spectrally distinct (with respect to π∗←n band) nitrate species included the rupture/formation of hydrogen bond(s) in the hydration shell of the nitrate ion.