Surface‐Confined Electropolymerization of Methylene Blue on Gold Electrodes

We report on the electrochemical behaviour and electropolymerization of self‐assembled monolayers (SAMs) of methylene blue (MB) on gold electrodes. The SAMs of MB on gold electrodes were prepared by immersing the substrates into a solution of 1.0 mM MB in absolute ethanol for different times at room temperature. Cyclic voltammetry experiments exhibited that reductive desorption of MB monolayer takes place at three different potentials on polycrystalline gold electrodes, while reductive desorption of MB monolayer consists of only one peak on single crystal Au(111) substrates. Calculated charge densities for different immersion times indicated that optimal immersion time for self‐assembly of MB is 96 h. Electropolymerization of SAMs of MB on gold electrode was achieved by applying 0.95 V for 1 s in 0.1 M borate buffer solution (pH: 9.0). It was observed that poly(MB) monolayers are highly stable in acidic media. ATR‐FTIR and UV‐vis spectra exhibited differences between monomer and polymer monolayers, which are attributed to surface‐confined electropolymerization. STM image of poly(MB) monolayer on Au(111) substrate revealed a surface that is covered by well‐ordered, collateral nanowires with an average size of 3 nm.     

Effect of chain length on the assembly of mercaptoalkanoic acid multilayer films ligated through divalent Cu ions

The structural stability of alkenthiolate monolayers assembled on gold surfaces is a result of the well-defined organization of the individual molecules within the film. The formation of three-dimensional films assembled by stacking multiple molecular monolayers is substantially more challenging because the correct organization of the molecular components is required not only within the individual monolayers but also between the monolayers of the film. In this paper we examine the structure of multilayer films based on mercaptoalkanoic acid monolayers in which ligation between adjacent monolayers is achieved using the interaction of carboxylic acid and thiol groups with a divalent Cu ion. Using contact angle analysis and atomic force microscopy, we show that the use of Cu(2+) has profound implications on the properties and structure of the multilayer film. In particular, the divalent ions effectively prohibit the complete assembly of the next monolayer. For multilayer SAMs assembled from short alkane chains with six methylene groups, we find that molecules in the incomplete adlayer organize themselves randomly over the underlying monolayer. However, as the number of methylene groups increases (11 and 16 methylene groups), the upper layer tends to fracture into discrete islands which cover around 50% of the surface. The height of these islands is found to be equal to that expected for a complete, well-ordered monolayer assembled from the equivalent mercaptoalkanoic acid molecules. This relationship between chain length and island growth results from the migration of molecules into ordered aggregates driven by the reduction of free energy associated with maximizing intermolecular interactions.     

Synthesis and surface structure of thymine-functionalized, self-assembled monolayer-protected gold nanoparticles

Thymine-functionalized SAM-protected gold nanoparticles with diameters of 2.2 +/- 0.3 nm and 7.0 +/- 1.0 nm were prepared via a modified two-phase transfer method. UV-vis spectra showed that particle size and solvent type, as well as surface charge, influenced the gold surface plasmon band absorption, along with the interaction between thymine terminal groups in the solution. Although the bulky thymine end groups interacted strongly on the particle surface, a well-ordered monolayer of thyminethiol derivatives with a long hydrocarbon chain was formed on the particle surface, exhibiting an ordered, all-trans conformation of the methylene backbone, similar to those of corresponding self-assembled monolayers (SAMs) generated from normal alkanethiols. A larger particle size and a longer reaction time facilitated the formation of more ordered thymine-terminated thiol SAMs. Thermal analysis indicated that reorientation of the SAMs during heat treatment occurred by two processes, caused possibly by the separate recrystallization of the hydrocarbon long chains and thymine units. More ordered SAMs with a higher thermal stability were formed on the larger particle surfaces when compared with those on the smaller ones. A greater density of molecular packing was found on the smaller particle surfaces. However, SAMs formed on the larger gold particles resembled 2D SAMs on the smooth, flat gold surfaces. XPS results confirmed the thymine structure as well as the chemical bond between gold and sulfur. One type of adsorbed sulfur species was observed for the smaller particles and two for the larger ones, but a slightly higher binding energy of thiolate was found for the smaller ones.     

Interaction of self-assembled monolayers of oligo(ethylene glycol)-terminated alkanethiols with water studied by vibrational sum-frequency generation

Vibrational sum-frequency generation (VSFG) was used to investigate the conformational changes in self-assembled monolayers (SAMs) of (1-mercaptoundec-11-yl) hexa(ethylene glycol) monomethylether (EG6-OMe) on gold when exposed to liquid water. VSFG spectra of the EG6-OMe SAMs were recorded before, during, and after exposure of the films to water and after a subsequent evacuation step. While in contact with water the entire ethylene glycol chains are found in a random, solvated state, after removal from the fluid water molecules remain absorbed only at the terminal groups of the film giving rise to distinct conformational changes. After evacuation, the structure of the EG6-OMe SAM reverts to its original state, indicating that water has been removed from the monolayer. Our findings support recent ab initio calculations and Monte Carlo simulations on the interaction of ethylene glycol-terminated monolayers with water.     

Effect of the phase states of self-assembled monolayers on pentacene growth and thin-film transistor characteristics

To investigate the effects of the phase state (ordered or disordered) of self-assembled monolayers (SAMs) on the growth mode of pentacene films and the performance of organic thin-film transistors (OTFTs), we deposited pentacene molecules on SAMs of octadecyltrichlorosilane (ODTS) with different alkyl-chain orientations at various substrate temperatures (30, 60, and 90 degrees C). We found that the SAM phase state played an important role in both cases. Pentacene films grown on relatively highly ordered SAMs were found to have a higher crystallinity and a better interconnectivity between the pentacene domains, which directly serves to enhance the field-effect mobility, than those grown on disordered SAMs. Furthermore, the differences in crystallinity and field-effect mobility between pentacene films grown on ordered and disordered substrates increased with increasing substrate temperature. These results can be possibly explained by (1) a quasi-epitaxy growth of the pentacene film on the ordered ODTS monolayer and (2) the temperature-dependent alkyl chain mobility of the ODTS monolayers.     

In situ spectroscopic characterization of rectifying molecular monolayers self-assembled on gold.

We report visible, Raman, and infrared spectra of self-assembled monolayers (SAMs) formed by the donor-(pi-bridge)-acceptor chromophore, Z-beta-[N-(omega-acetylthioalkyl)-4-quinolinium]-alpha-cyano-4-styryldicyanomethanide (CH3CO-S-CnH2n-Q3CNQ where n=8, 10), on gold-coated substrates. The data are compared with the spectra collected for the same compound in solution and in the solid state, and with those obtained for a Langmuir-Blodgett (LB) monolayer of C16H33-Q3CNQ deposited on gold. Spectral analysis confirms that in solution, in the solid state and in the LB film the chromophore has a zwitterionic (D+-pi-A-) ground state. At variance with this well-known result, our data show that in SAMs deposited on gold the chromophore has a more neutral, quinoid ground state. We relate this difference to the different packing of the molecules in the two different films: in SAMs in fact the chromophores stand almost vertical with respect to the substrate, whereas in LB films they make an angle of about 45 degrees. The Q3CNQ molecule is a well-known molecular rectifier, and for SAMs we were able to check the direction of electron flow at forward bias on the same samples that have been characterized spectroscopically, shedding light on the rectification mechanism.     

Synthesis and structural characterization of glucopyranosylamide films on gold

Self-assembled monolayers (SAMs) of glucose derivatives on gold have been prepared from alpha- and beta-glucopyranosylamide derivatives. The glucosyl conjugates were synthesized stereoselectively via the in situ generation of glucosyl isoxazolines followed by treatment with thiopyridyl esters. The resulting film structures were characterized by atomic force microscopy, reflection Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The experimental data indicated that alpha- or beta-linked glucopyranosylamide derivatives with free hydroxyl groups attach to gold via the thiol linker. Both derivatives form monolayer films with high packing densities--comparable to those typically observed for alkanethiol monolayers on gold. Acetate analogues of these conjugates do not form SAMs on gold; they form multilayered films under identical deposition conditions.     

Factors that determine the protein resistance of oligoether self-assembled monolayers --internal hydrophilicity,terminal hydrophilicity,and lateral packing density

Protein resistance of oligoether self-assembled monolayers (SAMs) on gold and silver surfaces has been investigated systematically to elucidate structural factors that determine whether a SAM will be able to resist protein adsorption. Oligo(ethylene glycol) (OEG)-, oligo(propylene glycol)-, and oligo(trimethylene glycol)-terminated alkanethiols with different chain lengths and alkyl termination were synthesized as monolayer constituents. The packing density and chemical composition of the SAMs were examined by XPS spectroscopy; the terminal hydrophilicity was characterized by contact angle measurements. IRRAS spectroscopy gave information about the chain conformation of specific monolayers; the amount of adsorbed protein as compared to alkanethiol monolayers was determined by ellipsometry. We found several factors that in combination or by themselves suppress the protein resistance of oligoether monolayers. Monolayers with a hydrophobic interior, such as those containing oligo(propylene glycol), show no protein resistance. The lateral compression of oligo(ethylene glycol) monolayers on silver generates more highly ordered monolayers and may cause decreased protein resistance, but does not necessarily lead to an all-trans chain conformation of the OEG moieties. Water contact angles higher than 70 degrees on gold or 65 degrees on silver reduce full protein resistance. We conclude that both internal and terminal hydrophilicity favor the protein resistance of an oligoether monolayer. It is suggested that the penetration of water molecules in the interior of the SAM is a necessary prerequisite for protein resistance. We discuss and summarize the various factors which are critical for the functionality of "inert" organic films.     

Interactions of doxorubicin with self-assembled monolayer-modified electrodes: electrochemical, surface plasmon resonance (SPR), and gravimetric studies

We present the results on the partitioning of doxorubicin (DOX), a potent anticancer drug, through the model membrane system, self-assembled monolayers (SAMs) on gold electrodes. The monolayers were formed from alkanethiols of comparable length with different ω-terminal groups facing the aqueous electrolyte: the hydrophobic -CH(3) groups for the case of dodecanethiol SAMs or hydrophilic -OH groups of mercaptoundecanol SAMs. The electrochemical experiments combined with the surface plasmon resonance (SPR) and gravimetric studies show that doxorubicin is likely adsorbed onto the surface of hydrophilic monolayer, while for the case of the hydrophobic one the drug mostly penetrates the monolayer moiety. The adsorption of the drug hinders further penetration of doxorubicin into the monolayer moiety.     

Self-assembled monolayers derived from a double-chained monothiol having chemically dissimilar chains

The structure and conformation of self-assembled monolayers (SAMs) derived from the adsorption of a specifically designed double-chained partially fluorinated thiol having the formula 12,12,13,13,14,14,15,15,16,16,17,17,18,18,19,19,19-heptadecafluoro -2-tetradecylnona-decane-1-thiol ( 2) onto the surface of evaporated gold were examined by ellipsometry, contact angle goniometry, polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS), and X-ray photoelectron spectroscopy (XPS). The results were compared to those of SAMs generated from normal hexadecanethiol ( 1) and a structurally related single-chained partially fluorinated thiol having the formula 12,12,13,13,14,14,15,15,16,16,17,17,18,18,19,19,19-heptadecafluorononadecane-1-thiol ( 3). Collectively, the studies demonstrate that the double-chained adsorbate 2 forms SAMs on gold in which the alkyl chains are less densely packed and less conformationally ordered than those in the SAMs derived from each of the single-chained adsorbates. Furthermore, the fluorocarbon moieties in the SAMs derived from 2 are more tilted from the surface normal than those in the SAMs derived from 3. The low values of contact angle hysteresis suggest, however, that the double-chained adsorbate 2 generates homogeneous monolayer films on the surface of gold.     

Enhanced stability of short- and long-chain diselenide self-assembled monolayers on gold probed by electrochemistry, spectroscopy, and microscopy

Well-ordered, compact, self-assembled monolayers (SAMs) of hexyl and dodecyl diselenides have been formed on oriented (111) gold surfaces. Monolayer formation has been effected by adsorption from neat diselenides as well as millimolar solutions of diselenides in alcohol. The monolayer formation is confirmed using electrochemical quartz crystal microbalance studies. The stability and permeability of the monolayers at various temperatures have been probed using reflection absorption infrared spectroscopy (RAIRS) and electrochemistry. The RAIRS studies in the dry state show the formation of highly ordered, compact structures when adsorbed from neat compounds compared to the monolayers adsorbed in the presence of alcohol. The monolayers adsorbed from neat diselenide are quite stable as a function of temperature irrespective of the chain length. The electrochemical studies based on the blocking behavior of the monolayers toward electron transfer between a diffusing species and the electrode surface reflect the stability and the compactness of the structure. The results point out that the presence of solvent molecules during the SAM formation hinders the organization of the monolayer structure, especially in the case of short-chain diselenide monolayers.     

Polar and azimuthal alignment of a nematic liquid crystal by alkylsilane self-assembled monolayers: effects of chain-length and mechanical rubbing

Alkylsilane self-assembled monolayers (SAMs) on oxide substrates are commonly used as liquid crystal (LC) alignment layers. We have studied the effects of alkyl chain length, photolytic degradation, and mechanical rubbing on polar and azimuthal LC anchoring. Both gradient surfaces (fabricated using photolytic degradation of C18 SAMs) and unirradiated SAMs composed of short alkyl chains show abrupt transitions from homeotropic to tilted alignment as a function of degradation or chain length. In both cases, the transition from homeotropic to tilted anchoring corresponds to increasing wettability of the SAM surfaces. However, there is an offset in the critical contact angle for the transition on gradient vs unirradiated SAMs, suggesting that layer thickness is more relevant than wettability for LC alignment. Mechanical rubbing can induce azimuthal alignment along the rubbing direction for alignment layers sufficiently near the homeotropic-to-planar transition. Notably, mechanical rubbing causes a small but significant shift in the homeotropic-to-tilted transition, e.g., unrubbed C5 SAMs induce homeotropic anchoring, but the same surface after rubbing induces LC pretilt.     

硅表面复合自组装膜的制备及其摩擦性能

采用自组装技术在单晶硅表面制备了3-氨基丙基三乙氧基硅烷(APTES)-SiO2-APTES复合膜,并对其表面的组成、结构及摩擦性能进行了表征.结果表明:复合膜表面对水的接触角约为63°,且表面平整、致密,其平均粗糙度(Ra)约为0.963nm.通过原子力显微镜(AFM)和透射电子显微镜(TEM)观察到夹层中SiO2颗粒的粒径约为20-50nm,较均匀地分布在第一层APTES膜的表面.与APTES自组装单层膜(SAMs)相比,APTES-SiO2-APTES复合膜由于纳米SiO2颗粒的引入而表现出更低的摩擦系数和更长的耐磨寿命.     

L-半胱氨酸和胱胺共自组装膜活体检测抗坏血酸

自组装单分子膜（SAM）由于其独特的物理化学性质近年来受到了极大的关注. SAM通过金硫键在电极表面形成高度有序的单分子膜,该稳定的分子膜不仅可以调节表面的亲疏水性质,而且可以促进电极表面氧化还原活性分子的反应速率. 本论文提出了一种简单有效的方法,在金微电极上构建半胱氨酸和胱胺共自组装单分子膜用于活体内抗坏血酸的检测. 研究发现,当混合单分子层中半胱氨酸和胱胺的摩尔比为1:1时,可以在低电位下（约为0.10 V）显著增强抗坏血酸氧化的电子转移动力学,同时该膜能在一定程度上抵抗蛋白质在电极表面的非特异性吸附. 将共自组装单分子膜应用到活体检测中,作者检测到鼠纹状体中抗坏血酸的基准值为257±30mmol·L^-1（n = 3）. 本论文为活体电化学检测提供了一种简单、有效的方法.     

Smectic liquid crystal alignment using mechanically rubbed n-octadecylsiloxane self-assembled monolayers

In recent years a variety of techniques has appeared for the fabrication and manipulation of self-assembled monolayers (SAMs). This development now offers new tools for the study and control at the molecular level of the interaction of liquid crystals (LCs) with solid surfaces, a research area of great importance for liquid crystal applications. In this paper we show that mechanically rubbed octadecylsiloxane SAMs generate a novel surface alignment of LCs in which the in-plane surface anisotropy usually accompanying rubbing is operative, but only for smectics in which the mean molecular long axis, [ncirc], is tilted from the layer normal. On our SAMs smectic phases align with the layers parallel to the SAM surface, and in tilted smectics the surface component of [ncirc] is along the rubbing direction. This anisotropy is absent in the nematic phases which align with [ncirc] strictly normal to the surface. This behaviour can be understood in terms of a rubbed SAM monolayer surface, which is low energy, molecularly smooth, and rendered anisotropic by the rubbing. UV irradiation of rubbed SAMs gave excellent planar alignment ([ncirc] parallel to the surface). This type of control over LC alignment has not been previously reported.     

末端硫醇化的甲氧基聚乙二醇分子自组装膜电极对碘离子的电化学分析研究

碘离子的测量方法有化学法和电化学方法等多种,电化学方法有离子选择性电极、阴极溶出伏安法等［１,２］,但以上方法易受共存离子的干扰．自组装膜修饰电极具有分子识别功能,因而可用于特定物质的检测［３］．末端硫醇化的聚乙二醇分子在金电极表面形成自组装膜后具有分子识别特性［４］,碘离子和聚乙二醇膜有较好的相容性,可以进入膜内进而到达电极表面进行反应,而其它干扰离子较难进入．因而,该膜电极能用于碘离子测定,检测下限低,并具有较强的抗干扰能力．１　实验部分１．１　试剂及仪器　甲氧基聚乙二醇（ＭＷ＝５０００）等…     

Nanostructured gold colloid electrode based on in situ functionalized self-assembled monolayers on gold electrode

A novel method for fabricating nanostructured gold colloid electrode based on in situ functionalization of self-assembled monolayers (SAMs) of 4-aminothiophenol (4-ATP) on gold electrode is proposed. The in situ functionalization of 4-ATP SAMs yields a redox active monolayer of 4′-mercapto-N-phenylquinone diimine (NPQD). When the amino-rich surface is exposed to gold colloid, the citrate-stabilized gold nanoparticles (GNPs) can be anchored onto the surface of the in situ functionalized electrode by the electrostatic interactions and a new nanostructured gold colloid surface was obtained. The mixed monolayers of in situ functionalized product, NPQD, and 1,4-benzenedimethanethiol (BDMT) can provide a more compact and order platform to fabricate GNPs on the electrode surface. The film formed by this technique has the advantages of high organization and uniformity, which could provide a desirable microenvironment to assemble GNPs and facilitate the concentration of the analyte from the bulk solution to the electrode surface. The nanostructured gold colloid electrode has favorable effect on the electrochemical oxidation of naphthol isomers.     

Poly(ethylene glycol) monolayer formation and stability on gold and silicon nitride substrates

Poly(ethylene glycol) (PEG) self-assembled monolayers (SAMs) are extensively used to modify substrates to prevent nonspecific protein adsorption and to increase hydrophilicity. X-ray photoelectron spectroscopy analysis, complemented by water contact angle measurements, is employed to investigate the formation and stability upon aging and heating of PEG monolayers formed on gold and silicon nitride substrates. In particular, thiolated PEG monolayers on gold, with and without the addition of an undecylic spacer chain, and PEG monolayers formed with oxysilane precursors on silicon nitride have been probed. It is found that PEG-thiol SAMs are degraded after less than two weeks of exposure to air and when heated at temperatures as low as 120 degrees C. On the contrary, PEG-silane SAMs are stable for more than two weeks, and fewer molecules are desorbed even after two months of aging, compared to those desorbed in two weeks from the PEG-thiol SAMs. A strongly bound hydration layer is found on PEG-silane SAMs aged for two months. Heating PEG-silane SAMs to temperatures as high as 160 degrees C improves the quality of the monolayer, desorbing weakly bound contaminants. The differences in stability between PEG-thiol SAMs and PEG-silane SAMs are ascribed to the different types of bonding to the surface and to the fact that the thiol-Au bond can be easily oxidized, thus causing desorption of PEG molecules from the surface.     

Time-resolved IR studies of monolayer self-assembly on a gold substrate using planar array infrared (PA-IR) spectroscopy

Time-resolved and spatially resolved infrared spectra (line images) of self-assembled monolayers of octadecylthiol (ODT) on gold substrates were investigated by planar array infrared (PA-IR) spectroscopy, with a grazing incidence reflection attachment. It was observed that PA-IR spectra with a good signal-to-noise ratio that is comparable to those obtained from Fourier transform infrared spectroscopy could be acquired with a significantly shorter collection time. Focusing on the peak intensities and peak positions of the CH2 asymmetric stretch (approximately 2918 cm(-1)) and the CH3 symmetric stretch (approximately 2960 cm(-1)), respectively, the molecular orientation and organization of the monolayers were determined. The ODT formed a uniform monolayer on the surface of the gold whether it was deposited within 1-2 s or over a 40 h period. Disordered monolayers formed instantly, and with an increase in dipping time, the monolayer became more ordered, becoming highly ordered after dipping times of many ( > 24) hours.     

Surface structure and chemical switching of thioctic acid adsorbed on Au(111) as observed using near-edge X-ray absorption fine structure

Thioctic acid (alpha-lipoic acid) is a molecule with a large disulfide-containing base, a short alkyl chain with four CH2 units, and a carboxyl termination. Self-assembled monolayer (SAM) films ofthioctic acid adsorbed on Au(111) have been investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS) to determine film quality, bonding, and morphology. Using standard preparation protocols for SAMs, that is, dissolving thioctic acid in ethanol and exposing gold to the solution, results in poor films. These films are highly disordered, contain a mixture of carboxyl and carboxylate terminations, have more than monolayer coverage, and exhibit unbound disulfide. Conversely, forming films by dissolving 1 mmol thioctic acid into 5% acetic acid in ethanol (as previously reported with carboxyl-terminated alkanethiols) forms ordered monolayers with small amounts of unbound sulfur. NEXAFS indicates tilted over endgroups with the carboxyl group normal on average 38 degrees from the surface normal. Slight angle-dependent intensity modulations in other features indicate alkyl chains statistically more upright than prostrate on the surface. Reflection-absorption Fourier transform infrared (RA-FTIR) spectra indicate hydrogen bonding between neighboring molecules. In such well-formed monolayers, a stark reorientation occurs upon deprotonation of the endgroup by rinsing in a KOH solution. The carboxylate plane normal is now about 66 degrees from sample normal, a much more upright orientation. Data indicate this reorientation may also cause a more upright orientation to the alkyl portion of the molecules.