几种扭振复合超声变幅杆的研究

对左、右段为圆柱型、中间段为变截面杆的三段式复合扭振超声变幅杆给出了频率方程和参数计算通式据此得出中间段l2分别为指数型、类国雄型、类悬镇线型和类余弦型，而l1=l3≠0，或l1≠0；或l3≠0的各种组合复合杆的参数计算式，并算出了其参数值，给出了主要参数曲线．测试了十组典型试件的谐振频率和放大系数，实验结果与理论值基本一致，本法可组合成许多适应各种用途的扭振复合杆     

几种扭振复合超声变幅杆的研究

对左、右段为圆柱型、中间段为变截面杆的三段式复合扭振超声变幅杆给出了频率方程和参数计算通式据此得出中间段l2分别为指数型、类国雄型、类悬镇线型和类余弦型，而l1=l3≠0，或l1≠0；或l3≠0的各种组合复合杆的参数计算式，并算出了其参数值，给出了主要参数曲线．测试了十组典型试件的谐振频率和放大系数，实验结果与理论值基本一致，本法可组合成许多适应各种用途的扭振复合杆     

简明设计复合扭振变幅杆

传统设计复合扭振变幅杆的方法是利用各形状函数杆之间的角位移连续和力矩连续的边界条件,来确定方程中的待定系数,导出频率方程。本文利用各形状函数分界之间机械阻抗相等的方法来设计复合扭振变幅杆。可简化设计,物理意义明显。这种方法也适用于纵振复合变幅杆的设计。     

超声变幅杆设计用表的计算机编制(IV)——纵、扭振变幅杆两用表

本文从分析纵振和扭振杆件振动方程及其解出发,得到两相对应的纵、扭振杆在外形、性能及尺寸应用声学     

扭振超声变幅杆谐振参数测定方法的研究

介绍以小信号正弦电磁激振和脉冲设击激振，加速度计进行信号检测的扭振超声变幅杆谐振频率和角位移放大系数的测定方法。该法已应用于科研试验中。     

夹心式纵-扭复合模式压电超声换能器的共振频率

本文对夹心式纵-扭复合振动模式压电超声换能器进行了研究．从换能器的等效电路出发，在无耦合时，得出了换能器中纵向振动模式及扭转振动模式的各自共振频率方程．实验表明，换能器各自共振频率的测试值与理论计算值基本符合．     

工具杆几何尺寸对超声扭转振动特性的影响

依据四端网络理论，利用机电类比方法，研究了具有类圆锥过度段的复合阶梯型变幅杆的扭转共振频率和与之相连接的工具杆的几何尺寸之间的变化关系，理论和实验符合的较好，为超声扭转加工振动系统的设计提供了参考依据。     

超声变幅杆的超声精密加工

本文探讨了超声变幅杆的精密加工．作者研制了双刀反间进给超声车削装置和单刀正向进给超声车削装置，采用了具有频率跟踪系统的晶体营型超声波发生器．超声车削设备连续140min工作时，频率漂移量只有29HZ，最高温度只有38℃．试验结果表明，加工精度可达IT7－ITS，表面粗糙度几可达0．4－0．8m，加工效率提高15倍，有效地解决了超声变幅杆的精密加工难题．     

抗性负载超声变幅杆振动特性研究

在负载为纯力抗的状况下，利用纵振型变幅杆等效四端网络，对频率方程和放大系数进行了研究．得到了三类常用变幅杆频率方程和放大系数的表达式；并通过MATLAB编程，分别绘制了三类变幅杆共振频率及放大系数随负载变化的曲线图．这将对超声变幅杆的研究和设计提供一定的理论依据．     

基于能量修正法进行大尺寸指数型超声变幅杆准确设计

基于能量修正法修正了大尺寸变幅杆纵振动共振频率方程，得出了其修正频率表达式，分析了大尺寸指数型变幅杆的共振频率修正值，并利用有限元软件ANSYS对一组大尺寸指数变幅杆进行了模态分析。结果表明，比起一维理论值，修正后的频率值更接近于有限元仿真分析结果，变幅杆的尺寸越大（即径长比越大）这种修正效果越明显。     

夹心式纵-扭复合模式压电超声换能器的共振频率

本文对夹心式纵－扭复合振动模式压电超声换能进行了研究，从换能器的等效电路出发，在无耦合时，得出换热能器纵向振动模式及扭转振动模式的各自共振频率方程，实验表明，换能器各自共振频率的测试值与理论计算值基本符合。     

新型柱孔式模式转换型纵-扭复合模态超声振动系统*

为了改善基于螺旋槽结构和斜槽结构的模式转换型纵-扭复合模态超声振动系统存在的结构复杂、扭转分量较小等问题,论文提出了基于新型柱孔式复合变幅杆的模式转换型纵-扭复合模态超声振动系统,并利用有限元法和数据分析对其进行了仿真分析,结果表明,引入新型柱孔式复合变幅杆的系统的输出端面的剪切应力、旋转角度得到了大幅提升,能够有效地提高纵、扭振动的转换效率。     

Study on the Langevin piezoelectric ceramic ultrasonic transducer of longitudinal-flexural composite vibrational mode

In this paper, the Langevin longitudinal-flexural composite mode piezoelectric ultrasonic transducer is studied. This type of transducers consists of slender metal rods and longitudinally polarized piezoelectric ceramic rings. The resonance frequency equations for the longitudinal and flexural vibrations in the transducer are derived. By correcting the length of the metal slender rods, the simultaneous resonance of the longitudinal and flexural vibrations in the transducer is acquired. The experimental results show that the measured resonance frequencies of the transducers are in good agreement with the computed ones, and the measured resonance frequencies of the longitudinal and the flexural vibrations in the composite transducers are also in good agreement with each other.     

Study of the sandwiched piezoelectric ultrasonic torsional transducer

The sandwiched piezoelectric ultrasonic torsional transducer was studied. The transducer consists of front and back metal cylinders, and coaxially segmented, tangentially polarized, piezoelectric ceramic tubes. The torsional vibration of the tangentially polarized piezoelectric ceramic slender tube was studied first and its electromechanical equivalent circuit was derived. Based on the network theory and the electromechanical equivalent circuit, the torsional vibration of the piezoelectric ceramic cylinder, formed by stacking a number of identical short piezoelectric ceramic rings, was analysed and the electromechanical equivalent circuit of the piezoelectric ceramic stack in torsional vibration was developed. Finally, the sandwiched ultrasonic torsional transducer was studied and resonance frequency equations were derived which can be used to design and calculate the torsional transducers for different applications.     

Temperature dependence of79BrNQR frequency in cadmium strontium,barium, zinc,magnesium and nickel bromates

The⁷⁹Br quadrupole resonance in cadmium, strontium, barium, zinc, magnesium and nickel bromates is studied in the range 77 to 305 K. The temperature dependence of the resonance frequencies in these systems has been analysed on the basis of the torsional motion of the BrO ₃ ⁻ groups. The torsional frequency and its temperature behaviour have been analysed.     

双泡模型共振频率的超声空化动力学研究

该研究旨在研究双泡模型的自然共振频率对超声空化的影响,通过理论计算研究了自然共振频率的影响因素,以及单频超声和双频超声与自然共振频率的关系。研究结果表明：气泡初始半径是影响自然共振频率的主要因素;低频驱动下的非线性波动程度会比高频的更加剧烈,当驱动频率等于气泡自然共振频率时,超声空化的效果更好;双频超声取气泡自然共振频率时超声空化效果远远优于单频超声驱动。该研究在超声医学和理解超声空化特性方面有着重要的意义。     

卤化银微晶中光电子衰减谱的特性

光电子在卤化银材料潜影形成过程中发挥着重要的作用 ,光电子衰减行为在很大程度上决定于卤化银的晶体结构。采用光学与微波双共振技术 ,测量了自由光电子和浅俘获光电子的衰减谱 ,得到了卤化银中电子陷阱的密度和深度分布。以自由光电子寿命为纽带 ,通过分析掺杂卤化银晶体中电子陷阱的分布情况 ,可以确定浅电子陷阱掺杂剂的最佳掺杂浓度。     

Investigation of the Raman spectra of CuxAgl−xGaS2 solid solutions

Raman spectra in (┴, ┴) and (║, ║) polarizations are investigated on crystals of CuGaS₂, AgGaS₂ compounds and Cu_xAg_l−xGaS₂ solid solutions. The frequencies of longitudinal and transverse optical phonons are determined, their concentration dependences are constructed, and the behavior of the vibrational modes in Cu_xAg_l−xGaS₂ solid solutions is established. Belarusian State University of Information Science and Radioelectronics, 6P, Brovka St., 220069, Minsk, Belarus. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 3, pp. 447–449, May–June. 1998.     

椭圆截面圆环和扭圆环的转动惯量

首先建立了椭圆截面的圆环和扭圆环的数学模型,然后根据定义计算绕3个坐标轴的轴转动惯量和惯量积,其间充分利用截面图形的对称性对计算过程简化,得到一些有益的结论和结果.     

Effects of Density-Dependent Bag Constant and Strange Star Rotation

With the emphasis on the effects of the density-dependent bag constant and the rotation of strange star the limiting mass of strange star is calculated. The obtained results show that the limiting mass and the corresponding radius of strange star increase as the rotation frequency increases, and tend to be lowered when the density-dependent bag constant is considered.