电感耦合等离子体原子发射光谱法测定镍矿石中的铂和钯

建立了测定镍矿石中铂和钯含量的电感耦合等离子体发射光谱法。借鉴铜阳极泥中铂钯的经典测定方法YS/T 745.3–2010,在用该方法测定含有较低含量的银铂钯样品时,铂钯难以准确测定。根据样品特性,试样先进行焙烧,除去杂质元素硫,通过补加纯银提高银金比例,优化并建立了镍矿石中铂钯含量的分析谱线和最佳工作条件,测定快速,结果准确。该方法适用于铂、钯含量为0.10～20 g/t的镍矿石的测定,铂的回收率为99.01%～100.00%,相对标准偏差为1.35%(n=10),钯的回收率为99.06%～100.00%,相对标准偏差为1.06%(n=10)。该法尤其适用于铂、钯含量低于0.2 g/t的大批量镍矿石的测定。     

碱熔-碲共沉淀分离-电感耦合等离子体原子发射光谱(ICP-AES)法测定废弃环保催化剂中铂钯铑

准确测定废弃环保催化剂中铂、钯、铑含量,是实现废弃环保催化剂贵金属高效回收和处置的重要保障技术条件之一,对回收铂族金属、湿法冶金生产物料平衡考察、保证买卖双方公平、公正交易等都具有重要的意义。采用碱熔分解废弃环保催化剂样品,碲共沉淀富集铂、钯、铑并与共存离子分离,采用电感耦合等离子体原子发射光谱法（ICP-AES）测定铂、钯、铑含量。结果表明,在1.2~2.7 mol/L盐酸体系中,加入碲沉淀剂,以二氯化锡为还原剂,能完全沉淀富集铂、钯、铑。铂、钯、铑校准曲线的线性范围为0.50～50.00 μg/mL,线性相关系数分别为0.99998、0.99996、0.99997;铂、钯、铑的检出限分别为2.6 μg/g、0.9 μg/g、1.2 μg/g;方法中铂、钯、铑的测定范围为25～25000 μg/g。按照实验方法测定废弃环保催化剂中铂、钯、铑,结果相对标准偏差(RSD,n=11)为0.2%～3.6%;加标回收率为96%～109%     

微波消解-电感耦合等离子体质谱法测定车用催化剂中铂、钯、铑

提出了电感耦合等离子体质谱法同时测定车用催化剂中铂、钯和铑的含量。样品0.100 0g经盐酸6mL、硝酸3mL、氢氟酸1mL和水4mL消解,选择195Pt、105Pd和103 Rh为待测同位素。铂、钯和铑的检出限(3σ)分别为0.003,0.5,0.002μg·L-1。方法用于5种催化剂样品的分析,测定结果与另两家实验室测定结果相一致。铂、钯和铑的回收率在85.5%～101%之间。     

碱熔-碲共沉淀分离-ICP-OES法测定脱氧催化剂中的铂钯含量

采用碱熔-碲共沉淀分离富集、电感耦合等离子体发射光谱(ICP-OES)法测定脱氧催化剂中铂、钯的含量。研究了碱熔和碲共沉淀富集分离的条件,并确定了ICP-OES法测定铂、钯的条件。结果表明,过氧化钠熔解-碲共沉淀法能够充分分离富集样品中的铂、钯,方法的检出限分别为4.6μg/L,7.2μg/L;相对标准偏差分别为1.3%,1.5%;加标回收率分别为98.2%~101%,97.6~101%。方法简单可靠,完全满足样品中铂、钯含量分析的要求,已经应用于生产样品的分析。     

电感耦合等离子体原子发射光谱（ICP-AES）法测定高镍铜液体样品中金、钯、铂

为实现中控液体物料中金、钯、铂元素的精准定量分析,为工艺生产定向富集和高效提取提供数据支持,本文建立了ICP—AES法测定中控冶炼系统中高镍铜液体样品中金、铂和钯3种元素含量的测定方法。确定了试液用碲共沉淀,贵金属进入滤渣,经火试金分离富集得到贵金属合粒,合粒经王水溶解后,于王水介质中在电感耦合等离子光谱仪上同时测定金钯铂的量。该方法金、铂、钯的测定范围为 0.014mg/L～5mg/L,回收率为92.2%～104.4%, RSD为3.21%～10.58%,方法满足高镍、铜液体样品中金、钯、铂元素的测定。     

石墨炉原子吸收光谱法测定矿石中铂、钯、铑、铱

矿石样品铂、钯、铑和铱经铅试金富集,所得金属合粒用硝酸-盐酸溶解,用石墨炉原子吸收光谱法测定矿石样品中铂、钯、铑和铱的含量。在优化的石墨炉工作条件下测得:铂的质量浓度在20～150μg.L-1、钯在15～120μg.L-1、铑和铱在6～100μg.L-1范围内与其吸光度呈线性关系,检出限(3s/k)依次为4.6,4.0,1.5,1.5μg.L-1。方法用于分析了2种矿石国家标准物质(GBW 07341、GBW 07342),测定结果与认定值相符。方法的回收率在87.6%～105.5%之间。测定值的日内和日间相对标准偏差(n=7)分别在2.8%～3.6%和3.5%～4.7%之间。     

电感耦合等离子体质谱法测定汽车尾气净化催化剂中铂、钯、铑含量

汽车尾气净化催化剂样品经过氧化钠熔融,用热水浸出,加入盐酸酸化后,分取部分试液用电感耦合等离子体质谱法测定其中铂、钯、铑的含量。选择镉(~(111)Cd)和铊(~(203)Tl)作为内标元素。铂、钯、铑的检出限(3s)分别为0.048,0.056,0.019μg·g~(-1)。方法用于5件催化剂样品的分析,测定结果与光度法测定结果相一致。铂、钯、铑的平均回收率分别为100.0%,100.0%,99.8%;相对标准偏差(n=12)分别为1.3%,1.0%,1.6%。     

微波辅助萃取/气相-质谱联用分析蔬菜中的有机磷农药

 建立了微波辅助萃取 (MAE) /气相 质谱联用法 (GC MS)测定蔬菜样品中二嗪磷、对硫磷、水胺硫磷的分析方法 ,研究了不同溶剂的萃取效率。选择二氯甲烷为萃取溶剂 ,采用二因素三水平的正交设计实验优化了萃取溶剂体积和萃取时间。方法的线性范围分别为二嗪磷和对硫磷 4ng/ g～ 40 0ng/ g、水胺硫磷 2 0ng/ g～ 40 0ng/ g,检出限分别为二嗪磷 0 2 9ng/g、对硫磷 1 70ng/g、水胺硫磷 2 30ng/g。测定 2 0 0 0ng/g和 50 0ng/g加标蔬菜样品 ,回收率为 72 2 %～ 1 0 2 0 % ,RSD为 1 5 %～ 1 1 0 %。。     

Kalman滤波流动注射化学发光法同时测定铂钯的研究

利用Luminol H2O2 OP Pt(Pd)化学发光新体系以及Kalman滤波化学计量学方法建立了流动注射化学发光法同时测定铂钯的新方法。方法的检出限:铂为2.2×10-8g mL、钯为2.4×10-8g mL,铂钯相对标准偏差分别为0.9%和3%。采用阳离子交换树脂静态吸附分离,消除贱金属离子的干扰。可用于贫铂矿中铂、钯的同时测定。     

TNA负载聚氨酯泡塑富集ICP-MS测定地球化学样品中痕量金、铂、钯

研究提出了负载聚氨酯泡沫塑料富集ICP—MS测定地球化学样品中的金、铂、钯的方法,研究了样品经灼烧、王水溶样后,负载泡沫塑料吸附条件、干扰的消除、仪器的最佳化、内标元素的选择等。在本工作的实验条件下获得的方法检出限分别为Au：0．12ng／g,Pt：0．10ng／g,Pd：0．08ng／g。本法测定了国家一级地球化学标准物质中的痕量Au,Pt,Pd,测定值与标准值相吻合。     

Low pressure laser ablation coupled to inductively coupled plasma mass spectrometry

The particle size distribution in laser ablation inductively coupled plasma mass spectrometry is known to be a critical parameter for complete vaporization of particles. Any strategy to reduce the particle size distribution of laser generated aerosols has the potential to increase the ion signal intensity and to reduce fractionation effects. Due to the fact that vapor generation, nucleation, condensation, and agglomeration take place within an extremely short period of time, ablation under atmospheric pressure might not allow influencing these processes while under reduced pressure condition the cooling of the aerosol and therefore the condensation is expected to be slower. In this study, a low pressure laser ablation cell for the generation of laser aerosols was coupled to an ICP-MS. In contrast to the previously developed trapped ablation mode, the newly designed cell allows the adjustment of the pressure in the ablation cell between 20 and 1400 mbar prior to the ablation.Ablation experiments carried out using this configuration showed a dependence of the aerosol properties (size distribution and particle structure) on the ablation cell pressure. The intensity ratio U/Th measured as a figure of merit for complete vaporization within the ICP indicated a change in the aerosol structure at approximately 500 mbar toward smaller particle size. A significant difference between low pressure and at ambient pressure ablated aerosol was observed. The intensity ratios (U/Th) of the ablated sample moves closer to the bulk composition at lower pressures at the expense of sensitivity. Therefore the decrease in the ICP-MS signal intensity in the low pressure cell can be attributed to vapor deposition within the ablation cell walls.Moreover, scanning electron microscope images of aerosols collected on filters after the low pressure ablation cell suggest the possibility of a slower cooling velocity of the aerosol, which was observed in the condensed material on the surface of ejected spherical particles. The expansion of the laser aerosol was also investigated using polished brass substrates in the expansion path-way for particle collection.     

无自旋混杂的耦簇理论

本文用APCCSD(T)，自旋投影方法消除CCSD中的自旋混杂，自旋投影算符^P用自旋湮灭算符^As 1和^As 2的乘积近似表出，提高了计算精度。     

Vibrational coupled cluster theory

The theory and first implementation of a vibrational coupled cluster (VCC) method for calculations of the vibrational structure of molecules is presented. Different methods for introducing approximate VCC methods are discussed including truncation according to a maximum number of simultaneous mode excitations as well as an interaction space order concept is introduced. The theory is tested on calculation of anharmonic frequencies for a three-mode model system and a formaldehyde quartic force field. The VCC method is compared to vibrational self-consistent-field, vibrational M?ller-Plesset perturbation theory, and vibrational configuration interaction (VCI). A VCC calculation typically gives higher accuracy than a corresponding VCI calculation with the same number of parameters and the same formal operation count.     

Quasi-variational coupled cluster theory

We extend our previous work on the construction of new approximations of the variational coupled cluster method. By combining several linked pair functional transformations in such a way as to give appropriately balanced infinite-order contributions, in order to approximate (L) well at all orders, we formulate a new quantum chemical method, which we name quasi-variational coupled cluster. We demonstrate this method to be particularly robust in the regime of strong static electron correlation, improving significantly on our earlier approximate variational coupled cluster approach.     

Hybrid coupled cluster methods: combining active space coupled cluster methods with coupled cluster singles, doubles, and perturbative triples

Based on the coupled-cluster singles, doubles, and a hybrid treatment of triples (CCSD(T)-h) method developed by us [J. Shen, E. Xu, Z. Kou, and S. Li, J. Chem. Phys. 132, 114115 (2010); and ibid. 133, 234106 (2010); and ibid. 134, 044134 (2011)], we developed and implemented a new hybrid coupled cluster (CC) method, named CCSD(T)q-h, by combining CC singles and doubles, and active triples and quadruples (CCSDtq) with CCSD(T) to deal with the electronic structures of molecules with significant multireference character. These two hybrid CC methods can be solved with non-canonical and canonical MOs. With canonical MOs, the CCSD(T)-like equations in these two methods can be solved directly without iteration so that the storage of all triple excitation amplitudes can be avoided. A practical procedure to divide canonical MOs into active and inactive subsets is proposed. Numerical calculations demonstrated that CCSD(T)-h with canonical MOs can well reproduce the corresponding results obtained with non-canonical MOs. For three atom exchange reactions, we found that CCSD(T)-h can offer a significant improvement over the popular CCSD(T) method in describing the reaction barriers. For the bond-breaking processes in F(2) and H(2)O, our calculations demonstrated that CCSD(T)q-h is a good approximation to CCSDTQ over the entire bond dissociation processes.     

Interface for capillary electrophoresis coupled with inductively coupled plasma atomic emission spectrometry.

A modified concentric nebulizer was used as the interface to couple capillary electrophoresis (CE) to inductively coupled plasma atomic emission spectrometry (ICP-AES). The CE capillary replaces the central tube of the concentric nebulizer. The tip of the nebulizer tapers slowly to allow uncertainty in the position of the capillary. A platinum wire was inserted into the CE capillary to provide electrical connection to the CE power supply. pH changes inside the capillary due to electrolysis of the background buffer electrolyte was small and has minimal effects on the CE separation. The peak broadening effects due to the nebulizing gas flow, however, were significant. Resolution decreases quickly when the flow-rate of the carrier gas increases. Sample stacking technique was used to improve the resolution of species of opposite charge, e.g., Cr(VI) vs. Cr(III) ions. Detection limit of Cr based on peak area is approximately 10 ppb for the CE-ICP-AES system.     

Determination of chloroplatinates by CE coupled to inductively coupled plasma sector field MS

In the present work the degradation of chloroplatinates emitted into the aquatic environment has been investigated in model studies. CE coupled to inductively coupled plasma sector field MS (ICP-SFMS) was employed as an analytical method of measurement. The CE-ICP-MS interface utilized the functional make-up flow design with a microconcentric nebulizer. [Pt(Cl(4))](2-) and [Pt(Cl(6))](2-) were separated within 5 min. During a measurement period of 6 h an excellent reproducibility of migration times (RSD 2.3%) could be achieved. The high sensitivity of ICP-SFMS resulted in an LOD of 80 ng/L platinum for the two compounds. External calibration using rhenium as internal standard was linear over three orders of magnitude. However, with external calibration a long-term drift of signal intensity was observed. In order to reduce the uncertainty of the obtained results, quantification of [PtCl(6)](2-) was performed for the first time by species-specific on-line isotope dilution MS using (194)[PtCl(6)](2-) as spike. The two different quantification strategies were compared in terms of their total combined uncertainty of measurement according to the EURACHEM guideline. The method was employed for monitoring the time-dependent degradation of [Pt(Cl(4))](2-) and [Pt(Cl(6))](2-) in water containing 0 and 2.8 mmol/L Cl(-) and river water. [Pt(Cl(6))](2-) was stable whereas [Pt(Cl(4))](2-) showed rapid degradation following pseudo first-order kinetics.     

Manganese speciation in human cerebrospinal fluid using CZE coupled to inductively coupled plasma MS

The neurotoxic effects of manganese (Mn) at elevated concentrations are well known. This raises the question, which of the Mn species can cross neural barriers and appear in cerebrospinal fluid (CSF). CSF is the last matrix in a living human organism available for analysis before a compound reaches the brain cells and therefore it is assumed to reflect best the internal exposure of brain tissue to Mn species. A previously developed CE method was modified for separation of albumin, histidine, tyrosine, cystine, fumarate, malate, inorganic Mn, oxalacetate, alpha-keto-glutarate, nicotinamide-dinucleotide (NAD), citrate, adenosine, glutathione, and glutamine. These compounds are supposed in the literature to act as potential Mn carriers. In a first attempt, these compounds were analyzed by CZE-UV to check whether they are present in CSF. The CZE-UV method was simpler than the coupled CZE-inductively coupled plasma (ICP)-dynamic reaction cell (DRC)-MS method and it was therefore chosen to obtain a first overview information. In a second step, the coupled method (CZE-ICP-DRC-MS) was used to analyze, in detail, which of the compounds found in CSF by CZE-UV were actually bound to Mn. Finally, 13 Mn species were monitored in CSF samples, most of them being identified: Mn-histidine, Mn-fumarate, Mn-malate, inorganic Mn, Mn-oxalacetate, Mn-alpha-keto glutarate, Mn-carrying NAD, Mn-citrate and Mn-adenosine. By far the most abundant Mn species was Mn-citrate showing a concentration of 0.7 +/- 0.13 microg Mn/L. Interestingly, several other Mn species can be related to the citric acid cycle.     

Short-column CE coupled with inductively coupled plasma MS for high-throughput speciation analysis of chromium

A method was developed for high-throughput speciation analysis of chromium by on-line coupling of short-column capillary electrophoresis (SC-CE) and inductively coupled plasma mass spectrometry (ICP-MS). Baseline separation of Cr(III) and Cr(VI) was achieved within 1 min by SC-CE in a 15 cm x 75 microm id fused-silica capillary at 6 kV using 15 mM HNO(3) as running electrolyte. The precisions (RSD, n = 5) of migration time and peak area for Cr(III) and Cr(VI) were in the range of 1.8-2.4% and 2.2-5.7%, respectively. The limits of detection (3sigma) of Cr(III) and Cr(VI) were 1.8 and 1.9 microg/L, respectively. The synthesized samples containing Cr(III) and Cr(VI) species were determined by the developed SC-CE-ICP-MS hyphenated technique, and the recoveries of Cr(III) and Cr(VI) in the synthesized samples were in the range of 103-110% and 90-108%, respectively.     

Brueckner coupled cluster response functions

A derivation of the linear response function for the Brueckner coupled cluster method is presented that enables the calculation of second-order molecular properties such as frequency-dependent polarizabilities. By using the Brueckner orbital variant of coupled cluster theory, the spurious pole structure inherent in the standard coupled cluster approach with orbital relaxation is avoided. © 1994 John Wiley & Sons, Inc.